SWCV not seen in ABAP Proxy

We have created some SWCVs. But some can be seen whereas some others cannot be seen!
The source and target systems are the same and all are JDBC sender to ABAP proxy receiver scenarios to the same client of ECC.
Only the products are different.
Can someone please help?
Thanks

Hi,
While dealing with the ABAp Proxies we have to activate the Settings in SAP R/3 System
How do you activate ABAP Proxies?
And also make sure that you have activated the newly created SWCV and do SLD Cache and SXI_Cache
Regards
Seshagiri

Similar Messages

  • ABAP Proxy generation terminated (WSDl choice element not supported)

    Hello
    Im trying to generate ABAP proxy from WSDL file (A valid XSD file has imported as External definitions in to XI Integration Repository and created Out bound Interface which gives WSDL file for Proxy generation in SPROXY).
    Unfortunately one of the WSDL file element "<choice>" not supported by ABAP Proxy Generation. it gives the following error.
    Proxy generation terminated: WSDL error (<choice> not supported)
    Message no. SPRX038
    Syntax of <choice> element code in WSDL file:
    <xsd:choice minOccurs='1' maxOccurs='1'>
    <xsd:element name='Employees' minOccurs='1' maxOccurs='1'>
    </xsd:element>
    </xsd:choice>
    Can some one please help if already come across this kind of problem.
    Please suggest me if there any alternate element for WSDL <choice>.
    Regards
    Rajesh

    Hi Aamir
    Thanks for your help...
    I have gone through attached thread.
    Does It means should i change <choice> element with any alternate element. If it is the case can u suggest me any alternate to <choice> element.
    Can u pls tell what are all changes i need to do in WSDL file to support ABAP proxy generation. 
    Regards
    Rajesh

  • How do ABAP Proxy and XI adapter work?

    Hi everybody,
    I have a general question about the ABAP proxy and XI adapter.
    In order to use the ABAP proxy and XI adapter, I must configure the HTTP Destination between the R/3 system and the XI server. I must also maintain the SLD.
    After several hours configurations with our administrator, it failed. At least the HTTP Destinations on both servers don't work correctly. We got always HTTP error message. But a scenario with an ABAP Receiver proxy works! It is really strange and laughable. We're very happy about that but don't know why and what happened. Today we tested the ABAP Sender proxy, it doesn't work.
    So we decide to ask the XI experts in this forum to give us a general lessen about the ABAP proxy: how it works, why we should create the HTTP destinations, how do the destinations work and so on.
    Thanks a lot in advance!
    With best regards
    Xiang

    Hi
    Once you create the interface in XI, you generate the proxies on your R3 system.
    Client Proxies -->
    This is done for outbound interfaces. You generate the proxy and then write a report that fills in the proxy class with the data and pushes it to XI.
    Server proxies -->
    Generated for inbound interfaces. Generate the proxy and write the implementation for the exectue method that deals with the data sent from XI to the R3 system
    Abap Proxy
    ABAP Proxies in XI(Client Proxy)
    Smarter Approach for coding ABAP Proxies
    The specified item was not found.
    ABAP Proxy - XML to ABAP Transformation
    http://help.sap.com/saphelp_nw04/helpdata/en/ba/f21a403233dd5fe10000000a155106/frameset.htm
    why we should create the HTTP destinations, how do the destinations work and so on.
    we create http destiantio because in proxies , adapter is not use so who is goin to send the message to integration server ...by creating http destinatio we create integration engine which send messg to IS . then messg is routed .and all
    error in HTTP to file scenario http to file
    hope this help's  you
    Regard's,
    Chetan Ahuja

  • PI system data in the form of .XLS is nto moving to Inbound ABAP Proxy...

    hi,
    When i execute the ABAP Porxy alone,it is working fine but when the input data is moved from PI system than the data is not reachign to ABAP Proxy.please guide me what cab be done.
    thanks,
    Deepthi.
    Moderator message: duplicate post locked.
    Edited by: Thomas Zloch on May 6, 2011 4:41 PM

    We have regenerated the proxy in ECC.

  • ABAP Proxy comm channel not seen in Comm Channel monitoring

    We have configured JDBC sender to ABAP proxy receiver.
    We are unable to see the receiver channel in comm channel monitoring. Is this normal or are we missing something?
    Also, the XI adapter cannot be seen in adapter monitoring...I hope thats fine...
    We are able to generate the ABAP proxy but we need to see the comm channel to troubleshoot.
    Any help will be appreciated.
    Thanks

    Hi SAP PI,
    As with the above commens this link may help u how to debug proxies.. you may try with this..
    For -- Debugging Proxies
    https://weblogs.sdn.sap.com/pub/wlg/4098--Debugging [original link is broken] [original link is broken] [original link is broken]
    For -- Testing Proxies
    XI: Debug your inbound ABAP Proxy implementation
    regards,
    Kishore

  • ABAP proxy exception to SOAP fault and vice versa not getting mapped

    Hi there,
    I have these scenario's: ABAP proxy to SOAP (AXIS framework) and the other way around, synchronous, using AAE.
    When declaring the Synchronous Service interfaces we also defined error message types in order to pass system and application exceptions back to the service consumers.
    The behavior we are observing is as follows;
    When an exception is generated on the ABAP proxy, the error message type is correct generated and filled with the corresponding values in the ABAP proxy runtime. However, when the response arrives at the service consumer, it only contains a SOAP fault filled with some kind of generic PI mapping exception information.
    1. Why is the original ABAP proxy exception not mapped/passed into the SOAP response?
    2. What can we do in order to change that situation?
    3. Does it has to do with the use of the AAE - Advanced Adapter Engine or the AXIS framework?
    PS: We have performed a test of the Operation Mapping - OM using the ABAP exception as input and it did work correctly, so the error structure seems to be Ok.
    Many thanks for your replies.
    Edited by: Roberto Viana on Jul 26, 2010 8:30 PM

    Problem was caused by some differences in namespaces between source and target.

  • ABAP Proxy not generate in QAS

    Hi All,
    I´m with problem in Abap Proxy objects, I developer and transported to QAS environment but has not generate in QAS.
    I checked this objects in environment QAS and all were transported.
    When I go to transaction SPROXY, it´s with not generate.
    Can someone help me?
    tks

    Hi,
    probably your developer forgot.... a few things while developing the proxy
    they are mentioned here:
    http://help.sap.com/saphelp_nw04/helpdata/en/2b/f49b21674e8c44940bb3beafd83d5c/content.htm
    Regards,
    Michal Krawczyk

  • ABAP Proxy configuration Error (Not able to connect R/3  to IB )

    Hello All...
    I am trying to configure the connection from R/3 to XI using the ABAP proxy generation.For that I have followed the steps given in the below blog
    /people/vijaya.kumari2/blog/2006/01/26/how-do-you-activate-abap-proxies
    We created all the credentials required for the XI and R/3 side configuration and its working fine individually when we have tested for the connection and also assigning this at SXMB_ADM,but in integration engine configuration,when I am trying with the URL <b>dest://<RFC destination(http</b>).Its giving error and in sproxy at R/3 its giving that no integration engine is connected to Business system.
    Whats worng with my configuration.How can I resolve this.
    I am having R/3 system WAS 6.40

    Hi,
    <i>But when I am giving the path prefix as you have specified I am getting an Error Query String Not Allowed.</i>
    I think thats the warning not error. Just press enter again and go to the logon detail Tab and give the userid password
    <i>And how can give the SLD details using the SLDAPICUST.</i>
    go to transaction SLDAPICUST and give the following details:
    Alias name :any name u want
    Prim: check this box
    Hostanme: give the Hostname where your SLD (XI server name if you are using the XI SLD)
    PORT: Java Port
    UserId/Password: for XIAPPLUSER
    I think you are missing on the configuration. I think its better if you go through the weblog again.
    Regards
    Vijaya

  • Message not going to the receiver ABAP Proxy

    I have a File-XI-ERP scenario.  The file communication channel is working fine but the sending to the ABAP proxy for transfer to ERP is not working.  I have created the right ID objects for the scenario.  Using the communication channel monitoring, the file gets to be read, transformed into the right message but sent to the wrong integration server (http://xidev:50000/sap/XI/engine?type=entry) instead of what is given in the communication channel.  Any suggestions on what to look at?

    Hai,
        Check whether the ABAP Proxies are enabled in your ERP System or not. To do this Login to your ERP System --> Goto tcode: SPROXY
    select option --> Goto --> Connection Test. this will check the connection b/n your ABAP proxy and the Integration Builder. the following parameters should be checked,
    1.The address of the Integration Builder must be stored in the SAP system
    =>Check/maintain with report SPROX_CHECK_IFR_ADDRESS
    2.The HTTP connection of the ERP application server must function correctly
    =>Check with report SPROX_CHECK_HTTP_COMMUNICATION
    3.The Integration Builder server must be running correctly
    =>Check with report SPROX_CHECK_IFR_RESPONSE
    4. Proxy generation must interpret the data of the Integration Builder correctly
    ==>Check with report SPROX_CHECK_IFR_CONNECTION
    Hope this helps..
    regards,
    Gopinathan.

  • ABAP Proxy response not showing data in SXMB_MONI

    hi all,
    We have a scenario of web service to abap proxy,synchronous.
    when the response comes back from ABAP,the xml in SXMB_MONI is not coming fully.Only the top level xml node and the Message type node are being dispalyed.the data nodes are not coming into xi.
    when the proxy is executed in R/3,the xml is generating correctly.but after coming into xi,only the top nodes are visible with no data.
    wht could be the reason?
    Regards,
    Anu.

    Hi,
    Also set the Parameters in SXMB_ADM to see the Sync Messages in MONI
    Configuration of a Central Integration Server
    REgards
    Seshagiri

  • Proxy structures not getting populated in receiver ABAP proxy

    hello
    i am having HTTP-ABAP Proxy scenario where i am entering sales order information from HTTP and sending it to SAP CRM system. I am using ABAP receiver Proxy for getting the message.
    But when i debugged the code of receiver proxy i couldn't found the structures being filled by the data. i checked in SXMB_MONI of CRM which was containing data into its payload but no data into the structures. actually i have generated proxy of the interface which uses external definitions as data type.
    has anyone faced such problem before?
    thanks in advance.
    Regards
    Rajeev

    Hi Rajeev,
    There should not be any problem due to XSD u have used.Ur proxy is created sucessfully i guess?? There may be some discrepancy in ur code..
    check the server proxy....may be helpful for u..
    Server Proxy (Receiver Proxy)-
    /people/siva.maranani/blog/2005/04/03/abap-server-proxies
    File to ABAP Proxy
    /people/prateek.shah/blog/2005/06/14/file-to-r3-via-abap-proxy
    check the threads also...
    problem in proxy?
    Re: coding of Server proxy
    Re: coding of Server proxy
    regards
    BILL

  • ABAP Proxy outbound not showing in sxmb_moni

    Hi All,
    All my ABAP proxy scenarios are inbound, however I need to do a outbound ABAP Proxy scenario.
    So, I created a Assyn interface in Integration Builder and created a proxy on outbound message interface in SPROXY. (ZCO_ITF_FILE_***).
    R/3 --> SQL server
    In my simple example I created a program in se38 as shown below
    DATA prxy TYPE REF TO ZCO_ITF_FILE_***.
    CREATE OBJECT prxy.
    DATA it TYPE ZMTP_FILE_***.
    TRY.
        it-MTP_FILE_***-id = '12'.
        CALL METHOD prxy->execute_asynchronous
          EXPORTING
            output = it.
    commit work.
    CATCH cx_ai_system_fault .
        DATA fault TYPE REF TO cx_ai_system_fault .
        CREATE OBJECT fault.
        WRITE :/ fault->errortext.
    ENDTRY.
    I want to send just one field called ID.
    The program works fine, the "commit work" is called but It doesn´t reach the XI. It doesn´t appear in SXMB_MONI.
    As I said before I have Inbound Abap Proxies interfaces, so, I got the sxmb_admin configured.
    What am I missing ?
    Thanks
    Diego

    Hi
    Thare are no error in SMQ2. The message shwon is
    Cl     | User      | Func. Module             |  Queue       |  Date          | Time      | Status Text 
    310    ABAP01  SXMS_ASYNC_EXEC   XBTS0005     26.05.2009  11:23:59  Transaction recorded
    When I press F6 the message goes to XI. the message reach the sxmb_moni in XI.
    But in XI I am facing with another error (the receiver could not be determined).
    Thanks
    Diego

  • ABAP Proxy Error - Integration Builder address not maintained

    I intend to use ABAP proxy between R/3 (ECC 6.0) and XI (PI 7.0).
    On configuring the relevant connections, I run SPROXY and get the following error:
    Integration Builder address is not maintained in the Exchange profile (Connections)
    I have created the connx LCRSAPRFC & SAPSLDAPI from R/3 to PI but the connectivity does not work.
    On running the reports
    SPROX_CHECK_IFR_RESPONSE
    SPROX_CHECK_HTTP_COMMUNICATION
    SPROX_CHECK_IFR_ADDRESS
    SPROX_CHECK_IFR_CONNECTION
    My question is:
    What is the Program to be used in LCRSAPRFC & SAPSLDAPI? I have used LCRSAPRFC_<sys id of XI server>
    and SAPSLDAPI_<sys id of XI server>
    Should the XI Integration Builder address be maintained in R/3?
    If yes, is there any place where IB address can be maintained in R/3 (I believe there is no such thing as exchange profile in R/3. then how can IB address be maintained in R/3??...pls correct if I am wrong)
    If IB address of XI has to be maintained in R/3 then can anyone pls tell me how to do it?

    Just recheck the steps with this and come up with doubts then
    How do you activate ABAP Proxies?
    Regards,
    Prateek

  • ABAP Proxy Inbound message does not call generated method

    Hi,
    we tried to generate a ABAP Proxy for a customer demo. It just should retrieve some data and write them to a database table.
    the generation and activation of the proxy was without errors. If we call the check function the method works fine.
    But if we receive data from XI via the regarding interface it looks as if the execute-method of the generated class is not called. We can see the message in SXMB_Moni, but nothing is written to the db table.
    Does someone have any idea?

    Hi Peter,
    There will be some error in the Proxy Side.
    Check this in Transaction Code-SXMB_MONI of Application System(R/3 etc) not in the XI system.
    There may be some communication(http etc) issues.
    Also check this -
    /people/krishna.moorthyp/blog/2005/12/23/monitoring-for-processed-xml-messages-in-abap-proxy
    Hope this helps to findout what is the error.
    Regards,
    Moorthy

  • ABAP Proxy does not send data to XI system.

    I have a very simple program to test an ABAP Proxy:
    REPORT  Z_TEST_PERSON_OB.
    DATA prxy TYPE REF TO Z996CO_PERSON_OB2.
    CREATE OBJECT prxy.
    DATA person TYPE Z996PERSON_MT  .
    *TRY.
    person-person_mt-first_name = 'Ken and Kenneth'.
    person-person_mt-Series = 'The Fast Show'.
    person-person_mt-motto = 'Ooh, suit you Sir!'.
    CALL METHOD prxy->execute_asynchronous
    EXPORTING
    output = person.
    commit work.
    I removed any exception handling to see if it would dump. Nothing. Seems to work fine, but no data appears in the XI Integration Engine monitor. I checked the scenario in XI and tested it; again, seems to work fine.
    Could I have missed something in setting up the system? Any pointers highly appreciated.
    BR,
    Tony.

    Try the Message Monitoring -> Messages from component 'Proxy Runtime <...>'.
    That's where I found my Messages back (Status: To Be Delivered...)
    If this is the case, probably your Proxy Runtime does send the messages to the Integration Engine.
    Check the queues:
    Transaction SXMB_ADM on the Business system (the system that sends the Proxy)
    Integration Engine > Administration > Manage Queues
    All queues should be checked
    Click ‘Register Queues’. Status bar should display a ‘Success message’.
    Click ‘Activate Queues’. Status bar should display a ‘Success message’.
    If it still does not work, maybe the is no connection between Integration Builder and Runtime Workbench.
    Check SM59 on your ECC-business system (the system that sends the Proxy). It should have the Connection INTEGRATION_DIRECTORY_HMI (type H). If not, this is the problem.
    Create a new connection INTEGRATION_DIRECTORY_HMI, type H.
    Tab Technical settings:
    Target Host is your XI-host
    Service No. 5xx00 (xx is the instance number of your XI-system)
    Path Prefix is "/dir/hmi_cache_refresh_service/ext" (without quotes)
    Tab Logon & Security
    Logon Procedure is "Basic Authentication"
    Logon using XIISUSER (or PIISUSER)
    Tab special Options
    Specify timeout: set to 900 msec.
    Compression Status should be 'inactive'
    Compressed response: No
    Accept Cookies: Yes (all)
    Save configuration and test connection. Popup about cookies appears. Check the "Accept All Further Cookies"option.
    The response should have HTTP/1.1 200 OK in the first line of the response header.
    Now your Proxy Runtime should be able to connect the Integration Engine.
    Greetings,  Frank

Maybe you are looking for