Swingbench Load Generator fails to quit the users
Hello All,
We have an Oracle DB 10.2 running on HP-UX. This is a demo application to demonstrate the migration of the CPU on the vPar environment when the oracle load goes high. We are using swingbench to generate the load to the Oracle DB.
The problem here is, the swingbench is configured with 7 users to generate the load to the Database. The load is not stable on the swingbench. It started with full load and it goes down to half. While analyzing the issue, we found that the "PL/SQL lock timer" is created on the db and fails to clear that lock. Basically it should fluctuates and it should goes to 0 sometimes. But in this case, it keeps on 7 locks. Due to this, the swingbench fails to logs off the users after the load generation completes.
Is this the problem with the db or related with the swingbench.
Please Advise.
Thanks,
Jayaprakash S
To Say in clear Words, We have a Oracle 10i Database and are using swingbench to increase the load in Oracle for an demonstration. But the swingbench is not maintaining the load on the oracle till the end of the scenario (10 mins).
The same setup is working for another instance of Oracle.
Similar Messages
-
Attribute Change run failed due to the User Lock
Hi Friends,
attribute change run has failed due to the user lock.
can any one tell me how to process and what is the main cause behind on this.
thanks in advanceif master data is loading at same time while the attr/hier change run is occuring,it cause the change run to fail.
Usually u get error message like..user ALEREMOTE has locked the MD tables..
Wait for some time and then try attr change run manually by going to rsa1->tools->apply hier/attr change..
if it still shows locked..try to see in rsmo if a MD load has got stuck..
else..see in sm12 to find lock is on which tables..
last resort..delete lock forcefully from sm12..
first option is wait for some time and give a try again..
cheers,
Vishvesh -
The report server has encountered a configuration error. Logon failed for the unattended execution account. (rsServerConfigurationError)
Log on failed. Ensure the user name and password are correct. (rsLogonFailed)
Logon failure: unknown user name or bad password
am using Windows integrated security,version of my sql server 2008R2
I have go throgh the different articuls, they have given different answers,
So any one give me the exact soluction for this problem,
Using service account then i will get the soluction or what?
pls help me out it is urgent based.
Regards
Thanks!Hi Ychinnari,
I have tested on my local environment and can reproduce the issue, as
Vaishu00547 mentioned that the issue can be caused by the Execution Account you have configured in the Reporting Services Configuration Manager is not correct, Please update the Username and Password and restart the reporting services.
Please also find more details information about when to use the execution account, if possible,please also not specify this account:
This account is used under special circumstances when other sources of credentials are not available:
When the report server connects to a data source that does not require credentials. Examples of data sources that might not require credentials include XML documents and some client-side database applications.
When the report server connects to another server to retrieve external image files or other resources that are referenced in a report.
Execution Account (SSRS Native Mode)
If you still have any problem, please feel free to ask.
Regards
Vicky Liu
Vicky Liu
TechNet Community Support -
I am able to run the report fine in BIDS in the preview window, and it deployes fine. When it goes to view the report in the browser, I get the following error. There is no domain, I am using a standalone computer with SQL Server and SSRS on
this one machine.
Can anyone point to where I might configure the permission it is looking for? thanks! Steven
The report server has encountered a configuration error. Logon failed for the unattended execution account. (rsServerConfigurationError)
Log on failed. Ensure the user name and password are correct. (rsLogonFailed)
The user name or password is incorrect
Steven DeSalvoHi StevenDE2012,
Based on the error message "The report server has encountered a configuration error. Logon failed for the unattended execution account. (rsServerConfigurationError)", it seems that the Unattended Execution Account settings in Reporting Services
Configuration is not correct.
Reporting Services provides a special account that is used for unattended report processing and for sending connection requests across the network. Unattended report processing refers to any report execution process that is triggered by an event rather than
a user request. The report server uses the unattended report processing account to log on to the computer that hosts the external data source. This account is necessary because the credentials of the Report Server service account are never used to connect
to other computers. To configure the account, please refer to the following steps:
Start the Reporting Services Configuration tool and connect to the report server instance you want to configure.
On the Execution Account page, select Specify an execution account.
Type the account and password, retype the password, and then click Apply.
In addition, please verify you have access to the Report Server database by following steps:
Go to SQL Server Reporting Services Configuration Manager, make sure the configuration is correct.
Go to Database, Verify that you can connect to the database.
Make sure you are granted public and RSExecRole roles.
Reference:
Configure the Unattended Execution Account
Configure a Report Server Database Connection
If the problem is unresolved, i would appreciate it if you could give us detailed error log, it will help us move more quickly toward a solution.
Thanks,
Wendy Fu -
I am running WHQL Certificating test on the Windows 8.1 host and during the run I am running into error like,
Cause : Failed to Start the Task
Cause : Failed to Get the user Token
Failure : Failed to Start the Task "Detour Logging"
Cause : Failed to Get User Token ""\"" For Task "Detour Logging"
Cause : Session Option Not Supported by the Operating System.
Cause : WinPE Does not Support this Session Option
Anybody has any thoughts on this?
Thanks in advance.I am running WHCK for my file system minifilter driver. I suffer the same thing with you. have you got any idea?
-
Hello,
My company recently decided to start using the 64 bit CR VS2010. Several machines have installed it and are working correctly, but others get Load Report failed - COMException (0x800001f5): The Report Application Server failed error when trying to render a crystal report to a new application window. This happens when running the app through VS2010 or IIS.
Another issue, is that once CR4VS2010 is installed, the ability to check-out .rpt files through TFS no longer works. CR4VS2010 will open the .rpt, but manual check-out is not allowed for some reason.
Machines are running Vista 64 bit Ultimate, VS2010, Crystal XI R2 SP4, and TFS.
So far I have tried re-installing VS2010 and CR4VS2010, but still get the same issues.
All help is greatly appreciated.
Thank you.Hello,
Please one question per post, makes it a lot easier to follow. Post your TFS question in a new post.
Use Process Monitor and compare logs between working and non-working PC's. Typically either missing dependencies or permission issues. Look for Access Denied errors.
Thank you
Don -
Java API Failed to authenticate the user session with LDAP
I have created a Java class that uses the MDM Java Api's it works fine on our Development environment where the MDM server uses its own built in authentication, but when I moved it to our QA environment where MDM use LDAP for authentication its failed with a 'Failed to authenticate the user session'. Has anyone seen this before?
hi Dan,
The java class which u have created that suppose to works fine on MDM server because to execute that program there are no requirement of such protocols, the problem u will face while exporting those program to an client machine
LDAP(Lightweight Directory Access protocol) connector communicates with the SAP system using RFC and with the directory server using these standard communication protocol.
so try to select the protocol such that it should help in making connection between the server,direcotryserver and the client machine through which u can execute u r java class using java Api's.
i hope this will give u an idea to through ur problem.
regards,
swapnil -
The BPM Workspace is loading and failing to initialize the directory.xml
Hi BPM Specialists,
I installed BPM along with SOA suit in Windows XP box. Now I am getting failing to initialize directory.xml error and the workspace is not getting loaded.I am not able to locate a directory.xml file in my installed directory. Please let me know what needs to be done.Thanks a lot in adavance.
Initializing PAPI services...
<May 3, 2011 1:10:23 PM IST> <Error> <oracle.bpm.common> <BEA-000000> <directory configuration runtime fails to initilize with resource: ..\config\directory.xml
java.lang.IllegalStateException: directory configuration runtime fails to initilize with resource: ..\config\directory.xml
at fuego.directory.DirectoryConfigurationManager.getDirectoryConfiguration(DirectoryConfigurationManager.java:335)
at fuego.directory.DirectoryConfigurationManager.getDirectoryConfigType(DirectoryConfigurationManager.java:313)
at fuego.directory.provider.Factory.getDirectoryFactory(Factory.java:216)
at fuego.directory.Directory.startAnonymousSession(Directory.java:211)
at fuego.papi.impl.ProcessServiceFactoryImpl.obtainSchemaId(ProcessServiceFactoryImpl.java:193)
at fuego.papi.impl.ProcessServiceFactoryImpl.create(ProcessServiceFactoryImpl.java:75)
at fuego.papi.impl.ProcessServiceFactoryImpl.create(ProcessServiceFactoryImpl.java:63)
at fuego.papi.ProcessService.create(ProcessService.java:335)
at oracle.bpm.workspace.adf.model.common.ADFWorkspaceEnvironment.initPAPI(ADFWorkspaceEnvironment.java:66)
at oracle.bpm.workspace.model.common.WorkspaceEnvironment.initialize(WorkspaceEnvironment.java:113)
at oracle.bpm.workspace.model.common.WorkspaceEnvironment.<init>(WorkspaceEnvironment.java:85)
at oracle.bpm.workspace.adf.model.common.ADFWorkspaceEnvironment.<init>(ADFWorkspaceEnvironment.java:37)
at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
at java.lang.reflect.Constructor.newInstance(Constructor.java:513)
at oracle.bpm.web.WebEnvironment.initialize(WebEnvironment.java:80)
at oracle.bpm.workspace.adf.ADFWorkspaceContextListener.contextInitialized(ADFWorkspaceContextListener.java:51)
at weblogic.servlet.internal.EventsManager$FireContextListenerAction.run(EventsManager.java:481)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
at weblogic.servlet.internal.EventsManager.notifyContextCreatedEvent(EventsManager.java:181)
at weblogic.servlet.internal.WebAppServletContext.preloadResources(WebAppServletContext.java:1872)
at weblogic.servlet.internal.WebAppServletContext.start(WebAppServletContext.java:3153)
at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1508)
at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:482)
at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:425)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
at weblogic.application.internal.flow.ScopedModuleDriver.start(ScopedModuleDriver.java:200)
at weblogic.application.internal.flow.ModuleListenerInvoker.start(ModuleListenerInvoker.java:247)
at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:425)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
at weblogic.application.internal.flow.StartModulesFlow.activate(StartModulesFlow.java:27)
at weblogic.application.internal.BaseDeployment$2.next(BaseDeployment.java:636)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
at weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:205)
at weblogic.application.internal.EarDeployment.activate(EarDeployment.java:58)
at weblogic.application.internal.DeploymentStateChecker.activate(DeploymentStateChecker.java:161)
at weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:79)
at weblogic.deploy.internal.targetserver.BasicDeployment.activate(BasicDeployment.java:184)
at weblogic.deploy.internal.targetserver.BasicDeployment.activateFromServerLifecycle(BasicDeployment.java:361)
at weblogic.management.deploy.internal.DeploymentAdapter$1.doActivate(DeploymentAdapter.java:51)
at weblogic.management.deploy.internal.DeploymentAdapter.activate(DeploymentAdapter.java:200)
at weblogic.management.deploy.internal.AppTransition$2.transitionApp(AppTransition.java:30)
at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:240)
at weblogic.management.deploy.internal.ConfiguredDeployments.activate(ConfiguredDeployments.java:169)
at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:123)
at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:180)
at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:96)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:207)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:176)
>
java.lang.IllegalStateException: directory configuration runtime fails to initilize with resource: ..\config\directory.xml
at fuego.directory.DirectoryConfigurationManager.getDirectoryConfiguration(DirectoryConfigurationManager.java:335)
at fuego.directory.DirectoryConfigurationManager.getDirectoryConfigType(DirectoryConfigurationManager.java:313)
at fuego.directory.provider.Factory.getDirectoryFactory(Factory.java:216)
at fuego.directory.Directory.startAnonymousSession(Directory.java:211)
at fuego.papi.impl.ProcessServiceFactoryImpl.obtainSchemaId(ProcessServiceFactoryImpl.java:193)
at fuego.papi.impl.ProcessServiceFactoryImpl.create(ProcessServiceFactoryImpl.java:75)
at fuego.papi.impl.ProcessServiceFactoryImpl.create(ProcessServiceFactoryImpl.java:63)
at fuego.papi.ProcessService.create(ProcessService.java:335)
at oracle.bpm.workspace.adf.model.common.ADFWorkspaceEnvironment.initPAPI(ADFWorkspaceEnvironment.java:66)
at oracle.bpm.workspace.model.common.WorkspaceEnvironment.initialize(WorkspaceEnvironment.java:113)
at oracle.bpm.workspace.model.common.WorkspaceEnvironment.<init>(WorkspaceEnvironment.java:85)
at oracle.bpm.workspace.adf.model.common.ADFWorkspaceEnvironment.<init>(ADFWorkspaceEnvironment.java:37)
at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
at java.lang.reflect.Constructor.newInstance(Constructor.java:513)
at oracle.bpm.web.WebEnvironment.initialize(WebEnvironment.java:80)
at oracle.bpm.workspace.adf.ADFWorkspaceContextListener.contextInitialized(ADFWorkspaceContextListener.java:51)
at weblogic.servlet.internal.EventsManager$FireContextListenerAction.run(EventsManager.java:481)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
at weblogic.servlet.internal.EventsManager.notifyContextCreatedEvent(EventsManager.java:181)
at weblogic.servlet.internal.WebAppServletContext.preloadResources(WebAppServletContext.java:1872)
at weblogic.servlet.internal.WebAppServletContext.start(WebAppServletContext.java:3153)
at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1508)
at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:482)
at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:425)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
at weblogic.application.internal.flow.ScopedModuleDriver.start(ScopedModuleDriver.java:200)
at weblogic.application.internal.flow.ModuleListenerInvoker.start(ModuleListenerInvoker.java:247)
at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:425)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
at weblogic.application.internal.flow.StartModulesFlow.activate(StartModulesFlow.java:27)
at weblogic.application.internal.BaseDeployment$2.next(BaseDeployment.java:636)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
at weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:205)
at weblogic.application.internal.EarDeployment.activate(EarDeployment.java:58)
at weblogic.application.internal.DeploymentStateChecker.activate(DeploymentStateChecker.java:161)
at weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:79)
at weblogic.deploy.internal.targetserver.BasicDeployment.activate(BasicDeployment.java:184)
at weblogic.deploy.internal.targetserver.BasicDeployment.activateFromServerLifecycle(BasicDeployment.java:361)
at weblogic.management.deploy.internal.DeploymentAdapter$1.doActivate(DeploymentAdapter.java:51)
at weblogic.management.deploy.internal.DeploymentAdapter.activate(DeploymentAdapter.java:200)
at weblogic.management.deploy.internal.AppTransition$2.transitionApp(AppTransition.java:30)
at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:240)
at weblogic.management.deploy.internal.ConfiguredDeployments.activate(ConfiguredDeployments.java:169)
at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:123)
at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:180)
at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:96)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:207)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:176)
java.lang.reflect.InvocationTargetException
<May 3, 2011 1:10:23 PM IST> <Error> <oracle.bpm.common> <BEA-000000> <WorkSpace failed on Startup.>
<May 3, 2011 1:10:23 PM IST> <Warning> <HTTP> <BEA-101162> <User defined listener oracle.bpm.workspace.adf.ADFWorkspaceContextListener failed: oracle.bpm.lang.exception.ProgramException: WorkSpaceWorkSpace failed on Startup..
oracle.bpm.lang.exception.ProgramException: WorkSpaceWorkSpace failed on Startup.
at oracle.bpm.lang.exception.ProgramException.wrap(ProgramException.java:54)
at oracle.bpm.workspace.adf.ADFWorkspaceContextListener.contextInitialized(ADFWorkspaceContextListener.java:55)
at weblogic.servlet.internal.EventsManager$FireContextListenerAction.run(EventsManager.java:481)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
Truncated. see log file for complete stacktrace
Caused By: java.lang.reflect.InvocationTargetException
at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
at java.lang.reflect.Constructor.newInstance(Constructor.java:513)
at oracle.bpm.web.WebEnvironment.initialize(WebEnvironment.java:80)
Truncated. see log file for complete stacktrace
Caused By: java.lang.RuntimeException: Critical Error.
Detail:
directory configuration runtime fails to initilize with resource: ..\config\directory.xmlThanks a lot for you reply.
I have installed OBPM 11g along with SOA suit.So whenever I am trying to restart the WL server, the log is showing the error where it is not able to initialize the directory.xml.
Could you please let me know what else can be done? -
Multiple Passed Authentication and Failed Attempts for the users
Hi,
I encountered the following error logs in the ACS CSAuth folder. I did logging to full to find out more about the process involved in the PEAP Authentications.
=========================================
AUTH 09/13/2007 09:41:33 I 0143 8672 [PDE]: PdeAttributeSet::addAttribute: Service-Type=2
AUTH 09/13/2007 09:41:33 I 0143 8672 [PDE]: PdeAttributeSet::addAttribute: Framed-MTU=1300
AUTH 09/13/2007 09:41:33 I 0143 8672 [PDE]: PdeAttributeSet::addAttribute: NAS-Port-Type=19
AUTH 09/13/2007 09:41:33 E 0143 8672 [PDE]: PdeAttributeSet::addAttribute: invalid attr type=200
AUTH 09/13/2007 09:41:33 E 0143 8672 [PDE]: PdeAttributeSet::addAttribute: invalid attr type=200
AUTH 09/13/2007 09:41:33 E 0143 8672 [PDE]: PdeAttributeSet::addAttribute: invalid attr type=201
AUTH 09/13/2007 09:41:33 I 0143 8672 [PDE]: PdeAttributeSet::addAttribute: EAP-Message=(binary value)
AUTH 09/13/2007 09:41:33 I 0143 8672 [PDE]: PdeAttributeSet::addAttribute: Message-Authenticator=(binary value)
AUTH 09/13/2007 09:41:33 I 0143 8672 [PDE]: PdeAttributeSet::addAttribute: PDE-NAS-Vendor-14=13
AUTH 09/13/2007 09:41:33 I 0143 8672 [PDE]: PdeAttributeSet::addAttribute: PDE-Service-ID-0=0
AUTH 09/13/2007 09:41:33 I 0143 8672 [PDE]: PolicyMgr::SelectService: context id=14824; no profile was matched - using
default (0)
AUTH 09/13/2007 09:41:33 I 5081 8672 Done RQ1152, client 2, status 0
AUTH 09/13/2007 09:41:33 I 5094 9668 Worker 5 processing message 1077.
AUTH 09/13/2007 09:41:33 I 5081 9668 Start RQ1026, client 50 (127.0.0.1)
AUTH 09/13/2007 09:41:33 I 1554 9668 pvAuthenticateUser: authenticate 'STAFPSAS\shimah' against Windows Database
AUTH 09/13/2007 09:41:33 I 5081 9668 Done RQ1026, client 50, status -2046
AUTH 09/13/2007 09:41:33 I 5094 9668 Worker 5 processing message 1078.
AUTH 09/13/2007 09:41:33 I 5081 9668 Start RQ1027, client 50 (127.0.0.1)
AUTH 09/13/2007 09:41:33 I 0897 9668 AuthenProcessResponse: process response for 'STAFPSAS\shimah'
AUTH 09/13/2007 09:41:33 I 5081 9668 Done RQ1027, client 50, status -2046
AUTH 09/13/2007 09:41:33 I 5094 9668 Worker 5 processing message 1079.
AUTH 09/13/2007 09:41:33 I 5081 9668 Start RQ1027, client 50 (127.0.0.1)
AUTH 09/13/2007 09:41:33 I 0897 9668 AuthenProcessResponse: process response for 'STAFPSAS\shimah'
AUTH 09/13/2007 09:41:33 I 5081 9668 Done RQ1027, client 50, status -2046
AUTH 09/13/2007 09:41:33 I 5094 9668 Worker 5 processing message 1080.
AUTH 09/13/2007 09:41:33 I 5081 9668 Start RQ1027, client 50 (127.0.0.1)
AUTH 09/13/2007 09:41:33 I 0897 9668 AuthenProcessResponse: process response for 'STAFPSAS\shimah'
AUTH 09/13/2007 09:41:33 I 5081 9668 Done RQ1027, client 50, status -2121
AUTH 09/13/2007 09:41:34 I 5094 9668 Worker 5 processing message 1081.
AUTH 09/13/2007 09:41:34 I 5081 9668 Start RQ1027, client 50 (127.0.0.1)
AUTH 09/13/2007 09:41:34 I 0897 9668 AuthenProcessResponse: process response for 'STAFPSAS\salasiah'
AUTH 09/13/2007 09:41:34 E 0361 9668 EAP: PEAP: getEapMsgFromPeapTunnelFrag: error decrypting non fragmented data.
AUTH 09/13/2007 09:41:34 E 0361 9668 EAP: PEAP: getEapMsgFromPeapTunnelFrag: SSL send alert fatal:unexpected_message
AUTH 09/13/2007 09:41:34 I 5081 9668 Done RQ1027, client 50, status -2120
AUTH 09/13/2007 09:41:34 I 5094 8672 Worker 1 processing message 842.
AUTH 09/13/2007 09:41:34 I 5081 8672 Start RQ1040, client 2 (127.0.0.1)
AUTH 09/13/2007 09:41:34 I 5081 8672 Done RQ1040, client 2, status 0
AUTH 09/13/2007 09:41:34 I 5094 8672 Worker 1 processing message 843.
AUTH 09/13/2007 09:41:34 I 5081 8672 Start RQ1152, client 2 (127.0.0.1)
=========================================
Can anyone suggest what could be the cause of the error?
I suspected something to do with the certificate. Please advise.
Thanks.
Delon
Thanks.If ACS and Supplicant or only ACS is enabled Fast Reconnect option, authentication will fail.If you are using XP SP2, it'll be fixed with applying KB885453 patch or simply just disable FAST Reconnect option at ACS. Also make sure user account trying to authenticate has a valid entry in active directory.
-
What can I do
Hey there Pinestreet87,
It sounds like your computer seems to boot but will not show your users so you cannot log in.
I suggest these steps from the article named:
Try a Safe Boot
If you're using Mac OS X 10.2 or later, you can start up your computer in Safe Mode, which includes an automatic disk check and repair. If you're using Mac OS X 10.1.5 or earlier, skip to the next section. A Safe Boot, which starts up your computer into Safe Mode, may allow you to start up your computer successfully using a reduced version of the system software. To do this, follow these steps:
Start up in Safe Mode.
After the system has fully started up, restart your computer again normally.
If the computer successfully restarts, you do not need to do any more troubleshooting. If the issue persists, try Disk Utility.
Try Disk Utility
Start from the Recovery System or Internet Recovery (OS X Lion or Mountain Lion).
If your computer shipped with a Mac OS X Install disc, insert the installation disc, and restart the computer while holding the C key.
If using a Recovery partition or Internet Recovery (OS X Lion and later): When your computer finishes starting up, choose Disk Utility from the Utilities window.
If using an installation disc: Choose Disk Utility from the Installer menu.
Important: If you started from an installation disc, do not click Continue in the first screen of the Installer. If you do, you must start from the disc again to access Disk Utility.
Click the First Aid tab.
Click the disclosure triangle to the left of the hard drive icon to display the names of your hard disk volumes and partitions.
Select your OS X volume.
Click Repair. Disk Utility checks and repairs the disk.
Tip: With Mac OS X v10.6 and earlier, always start up your computer from an Install or Restore disc when using Disk Utility to verify or repair your startup volume. Otherwise, you might see some disk error messages.
Use fsck if necessary
fsck is a command-line utility that may be able to verify and repair a disk. If you can successfully start up in Safe Mode or use Disk Utility while started up from a disc, you don't need to use fsck. Here are some situations in which fsck may be necessary.
From: Resolve startup issues and perform disk maintenance with Disk Utility and fsck
http://support.apple.com/kb/ts1417
Thank you for using Apple Support Communities.
Regards,
Sterling -
Seeing the error listed here.
The Remote Desktop Connection Broker server could not enumerate the targets for the provider named NULL from the database.
Pooled virtual desktop collection name: NULL
Error: Error code: 0xFFFFFFFF.
Broker and Hyper-V are on the same physical machine.
Any ideas on where to start troubleshooting this?
Used the happy wizard to create everything, and got no errors.
I have created a small pool collection, and given rights to domain users. Everything "looks" good.I have the same problem.
(Making this long hand for those who come after)
I have installed SQl Management Studio Express 2012 SP1
http://www.microsoft.com/en-us/download/details.aspx?id=29062
(You only need the one file "SQLManagementStudio_x64_ENU.exe")
Ran this as Administrator
And typed in the Server Name field
\\.\pipe\MICROSOFT##WID\tsql\query
Then hit connect.
Expanded Databases (+sign)
Expanded RDCms
Expanded Tables
Right Clicked on rds.target, select Edit top 200 rows
Right Clicked and copied, then pasted this into a notepad file on the desktop (As a backup)
Right Clicked and selected Delete to delete the row with the data in it (and PoolID was set to Null in this row)
Did the same for rds.pool
Manually added Remote Desktop server into the MEMBER OF tab of
“Windows Authorization Access Group” via Active Directory Users and Computers. As this domain was Windows 2003 Native when the RDS server was first installed.
Rebooted server and same issue>
Checked SQL again and rows had come back.
Is that what you meant by "delete
the rds.target and rds.pool with pool id = NULL"?
Not a SQL guru, so any help appreciated. -
Crystal Reports with VS2005 - Load Report failed Error....
Post Author: rajeshvijayan
CA Forum: Older Products
Hi,
I am running Crystal Reports viewer on IIS6.0 and windows server 2003, which was installed using the redistributable package that comes along with Visual Studio 2005. We open these reports through a web based application 1 which is run on a different application pool on IIS. We have about 3 to 4 other web applications runing on the same IIS. All the other Web applications are working fine.
This web application 1 has 2 parts - one is the normal data display quiries from the back end SQL server 2005 and the other is the Crystal Reports which also quires data from SQL Server 2005. At times i find that these reports all of them throw an error - Load Report Failed. At the same time the Part 1 of this application does work fine in showing the data that is queried from the database. Moreover at this stage, I dont find any errors in the Event viewer. If i restart this application pool alone, the reports starts working fine again.
I had gone through a few of the news groups and have made all the necessary permission related changes like the TEMP Folder, ASP.NET temporary folder, the folder in which the crystal reports is placed etc but still the same error throws up after some point in time. Wanted to know if there is any special configuration required on the Application pool when it comes to Crystal Reports. We have bout 10 to 15 users using this application for testing and it only throws this error at times and not always.
Looking forward to any kind of solution from your side.
Regards
RajeshPost Author: mikeeby
CA Forum: Deployment
Yes I too have been fighting this problem. I was using a XML Data file and schema file for my u201Cdatabase templateu201D in the report. I would then run my query using the .NET SQLClient then fill the report with my dataset table using the SetDataSource method from the ReportDocument object.
I tried both embedded and runtime loaded reports all worked fine on my development machine but would NOT work on my production server. I use all the server installs, played with user rights, registering DLLu2019s still nothing. I went as far as creating a winform app to fix the problem. I then had exactly the same problem, I was catching the error and it originated from the viewer control in both winform and webforms.
What finally worked for me was to attach to the database using OLE DB instead of XML/schema (xml/xsd) datasource then pasting my SQL Query into the database connection command this gave me the fields to build the report. I actually used the u201CSet Database Locationu201D Dialog in Crystal Reports so I didnu2019t have to redesign my report. This dialog works very weird but I managed to figure it out. I then used an embedded report and all seem to be well. I think there is a problem with the Crystal Reports .NET Server Install and Merge Modules used with .NET with XML files, but I cannot be sure, all I know is this worked for me.
I am concerned that if my database server is moved or renamed my report might break because the server connection is embedded in the report, but for right now it is working. I thought that was the reason for using the xsd file was to eliminate the dependence on a server connection in the report.
Good luck and I hope this helps you fix your problem too. If it does please let me know I have see so many reports of people asking questions about this problem and it seems like most are left hanging.
Mike -
Intermittent exception - Load Report Failed
Hi, I am new to the forums, this does kinda involve .Net but not be a simple .Net issue so I posted here.
I have been using Crystal Reports 10 for a while now, bolting it into web pages and never had issues but I have come across 2 lately that have me stumped. (I will do a different post for the other one)
The problem is that INTERMIITANTLY I get issues in the production environment with a Load Report Failed exception. The main user with thi s problem says that it will do it late in the day and then all the way up until she goes home. Then in the morning it will work just fine. I have also hit the same issue on my pc in testing. However when I try to duplicate this in debug mode it ALWAYS works!
One time I just republished and it fixed it for about a week or so then it started again.
At first I thought it was our SQL server and some kind of connection or load issue because it occurs in this chunk of code - where it sets the login parameters
TableLogOnInfos myTableLogOnInfos = crv.LogOnInfo;
foreach (TableLogOnInfo myTableLogOnInfo in myTableLogOnInfos)
myTableLogOnInfo.ConnectionInfo = myConnectionInfo;
But I have a whole bunch of sites which use the same backend class and the same code and they work just fine even in this time range.
I am getting a new SQL server soon so I will see for sure but I dont think that is the issue.
No matter what I do I cant recreate this in debug mode to step thru the code and find exactly what line is causing the issue. My SQL performance logs shows no issues at these times. (it is under heavy load hence the new one but nothing different during this time frame)
I also ruled out computer issues because it did the same thing in the production environment on my pc too.
Anyone got any ideas?Darn.. I wish someone had come up with an answer. We're experiencing a similar issue. As soon as we create a ReportDocument object and attempt to load a report, we receive an error. But not always! Most of the time, it works fine... then suddenly someone gets the error.
Code:
ReportDocument rptDocument = new ReportDocument();
rptDocument.Load(...path to report...);
Error:
Load report failed.
CrystalDecisions.CrystalReports.Engine
The system cannot find the path specified.
at
CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.EnsureDocumentIsOpened()
at CrystalDecisions.CrystalReports.Engine.ReportDocument.Load(String filename,
OpenReportMethod.openMethod, Int16 parentJob)
at CrystalDecisions.CrystalReports.Engine.ReportDocument.Load(String filename)
I have so far been unable to replicate the error in development... it only seems to happen in production. Guess we'll have to try to log the error as soon as it happens.. maybe the path to the report is getting messed up somehow.
If anyone has any ideas why it would only happen occasionally, please let me know! Thanks. -
Load report failed vs2005 web application
Post Author: haz
CA Forum: Crystal Reports
Hi,
I am running Crystal Reports viewer on IIS6.0 and windows server 2003, which was installed using the redistributable package that comes along with Visual Studio 2005. We open these reports through a web based application 1 which is run on a different application pool on IIS.
This web application 1 has 2 parts - one is the normal data display quiries from the back end SQL server 2005 and the other is the Crystal Reports which also quires data from Oracle. At times i find that these reports all of them throw an error - Load Report Failed. At the same time the Part 1 of this application does work fine in showing the data that is queried from the database. Moreover at this stage, I dont find any errors in the Event viewer. If i restart this application pool alone, the reports starts working fine again.
I had gone through a few of the news groups and have made all the necessary permission related changes like the TEMP Folder, ASP.NET temporary folder, the folder in which the crystal reports is placed etc but still the same error throws up after some point in time. Wanted to know if there is any special configuration required on the Application pool when it comes to Crystal Reports. We have bout 10 to 15 users using this application for testing and it only throws this error at times and not always.
Looking forward to any kind of solution from your side.
Regards
HazAnd finally the stack trace. Sorry for the length of these posts.
[COMException (0x800001f5): The Report Application Server failed]
CrystalDecisions.ReportAppServer.ClientDoc.ReportClientDocumentClass.Open(Object& DocumentPath, Int32 Options) +0
CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.Open(Object& DocumentPath, Int32 Options) +126
CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.EnsureDocumentIsOpened() +575
[CrystalReportsException: Load report failed.]
CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.EnsureDocumentIsOpened() +646
CrystalDecisions.CrystalReports.Engine.ReportDocument.Load(String filename, OpenReportMethod openMethod, Int16 parentJob) +1374
CrystalDecisions.CrystalReports.Engine.ReportDocument.Load(String filename) +169
Report_Viewer_Crystal_CrystalView.ConfigureCrystalReports() in c:\Inetpub\wwwroot\Report Viewer\Crystal\CrystalView.aspx.cs:49
Report_Viewer_Crystal_CrystalView.Page_Init(Object sender, EventArgs e) in c:\Inetpub\wwwroot\Report Viewer\Crystal\CrystalView.aspx.cs:33
System.Web.Util.CalliHelper.EventArgFunctionCaller(IntPtr fp, Object o, Object t, EventArgs e) +15
System.Web.Util.CalliEventHandlerDelegateProxy.Callback(Object sender, EventArgs e) +33
System.Web.UI.Control.OnInit(EventArgs e) +99
System.Web.UI.Page.OnInit(EventArgs e) +9
System.Web.UI.Control.InitRecursive(Control namingContainer) +321
System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +834 -
How can I restrain the user login portal once, in the same time ???
Hi
I need to restrain the user can't repeat to login portal ....
to reduce portal loading
How can I restrain the user login portal once, in the same time???
Which attributs in Identity Manager or amconsole I can do it to restrain the user ??
tksDoes your portal support anonymous access? If so, make sure you are using the authlessanonymous mode. This mode only creates one session that is shared for all anonymous users. This is much more efficient than anonymous access, which creates a session for each anonymous user.
I have no other recommendation for limiting users to a single login. In general, web applications do not behave like this. What if a user closes their browser without logging out? Does the user have to wait until the session times out in order to log back in again?
The same thing is true for users that are mobile. If a user leaves their office without logging out and then attempts to log in with a laptop in the conference room, then access will be denied in your implementation. Users do not expect this type of limitation being built into the system.
If you are having problems scaling, then you need to look at your architecture and perhaps add some more resources. Also, make sure you are making efficient use of the authlessanonymous access mode as stated above.
- Jim
Maybe you are looking for
-
Hi community, I set up search server 2010 express on a windows 2008 r2 server. The Adobe PDF iFilter 9 64 bit is installed and search is correctly configured to find PDF-files. When doing a search and clicking on a link of the result page, the PDF is
-
I am using border lines in the footer of a Word document and they are not showing up when creating a PDF. Increasing the line size or reducing the resolution to 300dpi does not help. Any other suggestions?
-
ORA-00903: Invalid table name - running Set based mapping
Hello, Using OWB 10.2.04.36 and have created a mapping which reads data from Non-Oracle, ODBC source table, actually a worksheet in an Excel workbook which has been defined/set up using the Heterogeneous Service components. I can view the data in the
-
2nd Generation Touch Wheel iPod - iPod displays a folder icon with a ! mark
Hi, My girlfriend has been using my old 2nd generation touch wheel iPod, and yesterday she was trying to listen to some music, and the iPod would load the name of the song, artist, album etc, and then skip to the next song without playing any music,
-
How to test integrated configuration?
Hi, I've set up an Integrated Configuration.(ICO) I know i cannot test from Tools >> Test Configuration I'm testing from RWB, i suppose i have to put my xml using the adapter engine test message option instead of the integration engine test option. Y