SwingComboBox not selectable when overlapping a TextBox

Hi all,
I am kinda stuck with a problem in FX application I am trying to build an was hoping someone here can give me a clue.
In my app I have some SwingComboBox nodes and some TextBox nodes. The TextBoxes are rendered below the SwingCombosBoxes in a Tile container. Now when i click on a SwingCombox it unfolds to allow the selection of one of it's values and overlaps the TextBox that is beneath (everything as expected).
But when i try to select the first value the selection box just closes and instead the TextBox becomes selected. I can select ComboBox values that are below the TextBox but values that overlap a TextBox cannot be selected.
When I replace the TextBox with a Label all values are selectable. So it seems that, even though the selection box is rendered above the TextBox, the mouse event is fired within the TextBox.
Can anyone tell me if I am doing something wrong? Is there a work around for this behaviour?
Thanks, Chris

BTW,
I tried to use toFront() on the SwingComboBoxes to put them "above" the TextBoxes in regard of the Z-order. This resulted in a change of the layout within the Tile container. Suddenly the SwingComboBoxes are on the bottom right corner as if they were inserted last in the Tile, but they should appear in the top row as the did before i added the Z-order change. Analog to that calling toBack() on one of the Nodes causes it to be rendered in the top left corner.
How can this be? The Z-order must not affect the way the Nodes are layed out in the container.
Can anyone enlighten me here?

Similar Messages

HT5312 I did all the steps, but my problem is that they are asking me some questions that I did not select when I created my Apple ID, so I clicked where it said reset security questions info... and then when I went to my email, they didn't sended me anyt

I did all the steps, but my problem is that they are asking me some questions that I did not selected when I created my Apple ID, so I clicked where it said reset security quiestion info...... And then when I went and cheked my email, they did not send anything to me!
This problem started 1 month ago!
Ivana1728

The email response is automated, and almost certainly is detected as "junk" or "spam". So, try again and check your spam folders for their reply.

Graphical Glitches: Objects appear not selected when they are, Symbols not appearing correctly

I've been having a ton of graphical glitches with Adobe Flash CS6 and I can't for the life of me figure out for the life of me.
Things that happen:
Objects will not appear selected when using the Free Transform Tool.
Symbols don't appar in scene when pasted, or dragged in until I leave the scene or symbol im in. They show up in the preview window though.
Something else I've been noticing is that when I use the Pen tool my computer or speakers or something making this werid noise and it only happens when I'm using the Pen tool.
Any help would be greatly appreciated.

No one has had these issues? I just got another one. My timeline disappeared, I don't mean the menu hid or thats it not there. It's there its just not actually displaying the Timeline or at least it didn't till I wen't back a few changes for some reason. It was still there though as I could click the eye and lock and the layers (which ones I have no idea) it was all grey. Also again the selection area doesn't show up, all movements of symbols are slow to update their postitions and when I turn on outlines it does nothing.
Also everytime I close Flash I get an error from windows, no idea why.

How do I get the pen tool in Adobe Acrabot xi to not select when the Pen is lifted off the tablet for a second?

Need a way to disable selecting when in Pen mode. Want to be able to write or draw on a PDF without selecting anything I've drawn. Currently if I try to write a H or T it will see me lift to go for the cross and it will select the item and then the only option I have is to move it or delete it. I can't annotate or draw on that spot until I hit escape a number of times and then it selects again when I draw on it.

Open the Users folder on the internal drive, drag all of the other home folders to the desktop, and then move the files inside to the desired locations.
(91949)

Frame Duration not selectable when clicking on show info for jepgs & stills

I have imported still images into imovie HD6 and cannot select the duration any clip. I have tried both, pressing apple+i and double-clicking the image.
The only thing that works is the manual slider control in the timeline section. The problem is I'm importing several hundred still clips and don't want the standard (default) of 5 seconds, but rather, 0:00:8 of a second. I was hoping to be more exact than just dragging the slider down. Not to mention manually changing each clip is going to take quite a long time.
Also, I was wondering if there was a way to "select all clips" and then change the duration of all clips at the same time? (so far I've been able to select all and that's about it)
any help would be appreciated
thanks,
-TJ
Intel 2Ghz Core Duo Mac OS X (10.4.6)
Intel 2Ghz Core Duo Mac OS X (10.4.6)

Thanks for the info. It has not completely solved my problem, but I have gotten farther. By importing the images from iphoto instead of a straight drag 'n drop from my desktop, I have now been able set the duration of my frames when importing. I am also able to change each clips duration individually once I double click on a frame in the timeline window.
Here's my dilemma:
I may be able to control the duration of each picture I import, however I can only choose the numbers I can set using the slider. Meaning, if I go in and punch in the numbers manually, even if its within the minimum 00:03, I still get an error that states "I have not set a time within the minimum parameters." You may wonder why I can't set the slider to what I want and that is because my slider control under "photo settings" skips from 0:03 to 0:18 or sometimes 0:15 or 1:10, 1:18, and so on....
clarification:
(i'm talking about as I slide the slider back and forth. It doesn't move up and down the numeric scale evenly. Once I set it on a number, it doesn't skip.
I mean it skips between numbers with no means to refine the number you really want to try—I hope I didnt' confuse further.)
A Little More Background:
I am importing 176 pictures as still clips from iphoto into imovie HD6. I don't know if the number of slides have something to do with it or not, I cannot seem find a definte answer to that. do you know?
Also, once imported from iphoto into imovie, it will not consistently behave the way I assume the program is made, when I try and set a new duration time. Meaning if I wanted to change all my photo stills from the chosen imported time of 00:03 to one of the next numbers on the slider (let's say it's 1:18), and I hit update, it sometimes changes it and sometimes doesn't. More times it does NOT. I have tried "select all" or "select similar" from the menu thinking that my selecting method may be the problem, but these actions don't seem to make a difference.
any ideas on what is wrong? is it a bug or is it something I'm not doing correctly.
btw: thanks for the note on the frame rates. I know I speak less intelligent in these areas. I appreciate the new knowledge.
Intel 2Ghz Core Duo Mac OS X (10.4.6)
Intel 2Ghz Core Duo Mac OS X (10.4.6)

Contact not selected when sending SMS

Hello,
I am using PC Suite 7.0.8.2 on WinXP Sp3 (standard user or admin: no difference); Nokia 6080; connection: USB.
Evereything seems to be ok but I have problems when composing/sending sms:
if I key in the phone number my sms is sent;
but if I choose a contact name the phone number is not displayed (I just see a semicolon and the sms is not sent (but I do not receive any error message). The same happens if I choose a contect in Contacts and then clic on "Send sms to this contact"
I have tried to uninstall and install PC Suite again, but the problem is not solved
Any idea?
Thanks
Cosimo

ACTIVATING FACETIME AND IMESSAGES
Activating Facetime and Imessages on your phone requires the ability to send SMS messages and depending upon where you are that might be an international SMS. Check with your carrier to see if your plan supports sending of international SMS messages. If you are having trouble activating Facetime or Imessages turn them both off on your device and reset the device (Hold down the Sleep/Wake button and the home button together until the apple logo appears (ignore the ON/OFF slider) then let both buttons go and wait for device to restart (no data will be lost)). Wait for the device to restart and wait a minute and turn Facetime and imessage back on and wait for activation. If that does not fix things read the following articles:
http://support.apple.com/kb/TS4268
http://support.apple.com/kb/ts3367

Craigslist pictures do not select when rolling over

Used to be that when a craigslist ad had multiple pictures, rolling over the thumbnails would load that picture in the larger space above. Now nothing happens and if I click the thumbnail the picture loads but only the picture.
thinking it is some add on I've recently added but I can't determine which add ons have been recently added/enables.

You can try these steps in case of issues with web pages:
You can reload web page(s) and bypass the cache to refresh possibly outdated or corrupted files.
*Hold down the Shift key and left-click the Reload button
*Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
*Press "Command + Shift + R" (Mac)
Clear the cache and cookies only from websites that cause problems.
"Clear the Cache":
*Firefox/Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
"Remove Cookies" from sites causing problems:
*Firefox/Tools > Options > Privacy > "Use custom settings for history" > Cookies: "Show Cookies"
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem.
*Switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance
*Do NOT click the Reset button on the Safe Mode start window
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

Curve 8900 Track ball does not select (but moves properly)

Hi, the track ball of my Curve 8900 does not select when pressed. When rolling it works ok. It seems to be a SW problem because I changed the sw version and it started to work again (not very reliable) and know it does not work anymore... Any idea what to do? Thank you very much!

Hi, I have exactly the same problem written above. Is it really the only solution to by a media card? Why can I not download my pics from the internal memory of the device? Is there no way to download the pictures I have done until now without media card?

My firefox is not running- when i try to open it their appears.. "The exception unknown software exception (0xc0000417) occurred in the application at location

<blockquote>Locking duplicate thread.<br>
Please continue here: [[/questions/942433]]</blockquote>
my firefox is not running… when i try to open it their appears.. “The exception unknown software exception (0xc0000417) occurred in the application at location 0x78b2ae6e” ..what can i do..????
REPLY

If you have submitted crash reports then please post the IDs of one or more crash reports that have this format:
*bp-xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx
See:
*http://kb.mozillazine.org/Mozilla_Crash_Reporter
*https://support.mozilla.org/kb/Mozilla+Crash+Reporter
If you can't open Firefox then see:
*http://kb.mozillazine.org/Mozilla_Crash_Reporter#Location_of_crash_reports
*http://kb.mozillazine.org/Mozilla_Crash_Reporter#Viewing_crash_reports
See also:
*http://kb.mozillazine.org/Firefox_crashes
*https://support.mozilla.org/kb/Firefox+crashes
Try a clean reinstall and delete the Firefox program folder before reinstalling a fresh copy of Firefox.
*C:\Program Files\Mozilla Firefox\
*http://kb.mozillazine.org/Installation_directory
Download a fresh Firefox copy and save the file to the desktop.
*Firefox 17.0.x: http://www.mozilla.org/en-US/firefox/all.html
Uninstall your current Firefox version, if possible, to cleanup the Windows registry and settings in security software.
*Do NOT remove personal data when you uninstall your current Firefox version, because all profile folders will be removed and you will also lose your personal data like bookmarks and passwords from profiles of other Firefox versions.
Remove the Firefox program folder before installing that newly downloaded copy of the Firefox installer.
*It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
*http://kb.mozillazine.org/Uninstalling_Firefox
Your bookmarks and other profile data are stored in the Firefox Profile Folder and won't be affected by an uninstall and (re)install, but make sure that "remove personal data" is NOT selected when you uninstall Firefox.
*http://kb.mozillazine.org/Profile_folder_-_Firefox
*http://kb.mozillazine.org/Profile_backup
*http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

Firefox will not load when the icon is clicked

I have been running Firefox for a few months now on my Windows 7 64-bit Laptop, however recently when I clicked the firefox icon the firefox window does not appear, I have attempted restarting my computer, allowing firefox on my firewall, running firefox with admin permissions, reinstalling firefox, but none of these methods seem to work. I haven't recently installed any add-ons or updated my firefox. Any solutions?

Did you remove the Firefox program folder before reinstalling Firefox?
Do a clean reinstall and delete the Firefox program folder (C:\Program Files\Mozilla Firefox\) before reinstalling a fresh copy of Firefox.
*http://kb.mozillazine.org/Installation_directory
Download a fresh Firefox copy and save the file to the desktop.
*Firefox 15.0.x: http://www.mozilla.org/en-US/firefox/all.html
Uninstall your current Firefox version, if possible, to cleanup the Windows registry and settings in security software.
*Do NOT remove personal data when you uninstall your current Firefox version, because all profile folders will be removed and you will also lose your personal data like bookmarks and passwords from profiles of other Firefox versions.
Remove the Firefox program folder before installing that newly downloaded copy of the Firefox installer.
*It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
*http://kb.mozillazine.org/Uninstalling_Firefox
Your bookmarks and other profile data are stored in the Firefox Profile Folder and won't be affected by an uninstall and (re)install, but make sure that "remove personal data" is NOT selected when you uninstall Firefox.
If you keep having problems then also create a new profile.
*http://kb.mozillazine.org/Profile_folder_-_Firefox
*http://kb.mozillazine.org/Profile_backup
*http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

Drop down menus on iPad, the first selection in the drop down will not load as a selection when using safari, what can I do?

Drop down menus on iPad, the first selection in the drop down will not load as a selection when using safari, what can I do? I use this for my mobile, on-site auto repair business and not being able to call up repair and diagnostic info and reference for some cars is troublesome for sure. It works fine on the computer and I have installed a remote desktop app as a workaround but it is unreliable because the desktop is not business dedicated and may be off or in use at the time. So is there a known fix for this?
Let me paint a more descriptive picture, visualize 4 drop down selection menus, first one is for year, next one is for make, 3rd one is model and the last one is for engine size/type. If I wanted to choose a 2012 vehicle it wont work because it is the top selection on the list. This can be forced by selecting any other year and then coming back to 2012. Ok fine, but then let's say I wanted to choose Acura as the make, well it won't take it because again it's the top selection. Again you work around it be selecting any other make and coming back to Acura. Ok now select the model, same trend follows. But now since most Acura vehicles come with dedicated engines and no optional engines I have only 1 selection in that final drop down menu and it will not take my selection and therefore never let me proceed to the info I need.
This is also true when ordering parts from my wholesaler's website, they use drop downs and I can only get to that last drop down and then I'm stuck. This is blindingly frustrating, what options do I have. I'm not opposed to any avenue at this point.

Did you ever figure this out? I bought my iPad last week to use in my business as well. I assume you are trying to use alldata? That is where I noticed this same issue. I had problems with identifix working with safari but downloaded a different browser and that works fine. Alldata does not work with either browser. The main difference is that on identifix if there is only one engine selection, it automatically selects the only option and continues to the home page. With alldata you have to make the selection manually even if there is only one option. Honestly if I can't get this to work I am going to return the iPad as it looses a significant amount of usefulness to men

When printing a list in Address Book, how can I select more than the default Attributes and keep them selected when I print again? I want to print ALL information for contacts so I have email address, notes, phone, company, title, etc all on one page.

When printing a list in Address Book, how can I select more than the default Attributes and keep them selected when I print again? I want to print ALL information for contacts so I have email address, notes, phone, company, title, etc all on one page. I don't want to have to check off an additional 5 or 6 attributes each time I print out contact information. Is there a way to change the default setting for printing lists, so it is not just "phone," "photo," and "job title?"

I have a user who wants to do this same thing. I did not find any way either to default the attributes to anything other than what you see the first time. Seems like such a trivial thing, hard to believe they do not allow it. I did find a program for this called iDress but I can't seem to download it from any links on the Internet. Not sure if it is free or not, but it was recommended by a link on the Mac support site.

Detail region does not refresh when selecting from a drop-down list in master region

I am using DW CS3 and have updated to version 1.6.1 of Spry. Using an XML dataset, I am able to create a Spry table as the master region that links to a detail region that displays a small JPG graphic. It works fine in this format (clicking on a row displays the correct graphic). However, my table has 80 rows and requires the user to do too much scrolling. So I changed the master region to a drop-down repeat list, but the graphic does not change when a new selection is made in the drop down list. Listed below is the code produced when I used the insert Spry Repeat List. I got the same results when adding a spry:setrow="dsChartNurse". I also tried -- onclick="dsChartNurse.setCurrentRow('{ds_RowID}');" -- which again made no difference.
When I removed children from the spry:repeat, the master region displayed as a two column list of all 80 items in a drop-down list format.
<div spry:region="dsChartNurse">
       <select name="select" spry:repeatchildren="dsChartNurse">
         <option value="{name}">{name}</option>
       </select>
</div>
<div id="image" spry:detailregion="dsChartNurse">
   <img src="{dataimage}" align="center" style="margin:50px 0 0 0"width="320" height="164" />
</div>
Thanks so much to anyone who can help correct my code in order to have a drop-down list display information correctly in the detail region.

Thanks for the quick reply. I did solve the problem I was having by changing from onclick to onchange in the master region. But, now I have another problem with, of course, IE. I just put in online at http://www.minursemap.org/ageDistNurse.html. When opened in IE, the drop down list displays the last entry, but the image is for the first in the list. Thanks again for your help.

Reference of 103 mat.doc. in 105 doc. , when GR based IV is not selected

Hi,
I required logic, to list out 103 material documents for which movt. 105 is not made , If GR based IV is not selected in PO.
We know, each MIGO document has a reference document number. In case of 103 document, the reference document number is the same number In case of 105 document, the reference docu number is the document number of 103.
But, the reference document number is blank, when GR based IV is not ticked in the Purchase order.
I need some logic to find the reference of 103 document in 105 document for items without GR based IV.
Best Regards
Saravanan

Hi,
Does your PO history had been updated bu the 103 and 105 ? Please check , or the table EKBE,.
Please check table mseg.
Regards,

How do I know if private browsing is working? The purple mask does not appear when I click the mask icon. In my privacy settings "Never Remember" is selected.

I'm trying to confirm private browsing is working. Right now I have no way of knowing if it is on or not. The purple mask ,referred to in help, does not appear when selected. I should say in my privacy settings, I have selected "Never Remember" for history.

Do you mean you have checked the box: "Always use private browsing mode"? If so, it's intentional that the private browsing icon isn't displayed as we didn't want Firefox to be showing everyone within view that you're using private browsing mode IIRC.
There are some easy things you can do to confirm that you are in private browsing mode such as visiting a new website and then confirming it doesn't appear in the history window.

SwingComboBox not selectable when overlapping a TextBox

Similar Messages

Maybe you are looking for