Switch Code Not Populating from Dropdown

I am using below code on exit property of dropdown (actual has about 4 locations/names). The SiteMgr and SiteLoc fields are not populating when a selection is made. The dropdown is in a subform named sfrmProjNo, it is located on the main/1st page of form. Any ideas where I'm going wrong? Thank you!
dataroot.#subform[0].Table1.Row1[1].sfrmProjNo.proj3dig::exit - (JavaScript, client)
switch (this.rawValue)
    case "ABC":
    SiteMgr.rawValue = "Name 1";
    SiteLoc.rawValue = "Location 1";
    break;
    case "DEF":
    SiteMgr.rawValue = "Name 2";
    SiteLoc.rawValue = "Location 2";
    break;
    case "GHI":
    SiteMgr.rawValue = "Name 3";
    SiteLoc.rawValue = "Location 3";
    break;
    case "JKL":
    SiteMgr.rawValue = "Name 4";
    SiteLoc.rawValue = "Location 4";
    break;

Its may be because of wrong path for the fields.
SiteMgr ,SiteLoc fields are under the sfrmProjNo subform ? If they are not then
Try to give complete path for the fields.If it doesnt work As Malcolm told share the file so that we can have a look ..

Similar Messages

Commodity codes not populating

Commodity codes that i have added to the material master for GB are not loading in the delivery.
Can some give reason as to why that is happening?

Hi,
Check in t.code OVE1, the commodity code is created under the departure country. You have not mentioned from which country the shipment is sent to GB. I would suggest to check whether the commodity code is created from both departure coutnry and destination country.
Also check in OVE1, for the commodity code, there is a field at the bottom where in user can select for export only or import only or for both. You need to select appropriate value in that field.
After this, you will need to create the delivery again after deleting the existing delivery for auto population of the commodity code or in the existing delivery itself, you can add the commodity code at the item level -> foreign trade tab.
Regardsh

Life in months is not populating from interface in Mass Additions Post

Hi,
We have one critical issue in FA conversion.We have popultaed the life_in_months in fa_mass_additions table.When we run the Mass Additions Post,it is defaulting the life_in_months from category and not from fa_mass_additions interface table.As per intended functionality,it should populate from interface table.
If any of you encounter the issue,Please let me know the soultinon.
Thnaks
Praveen

>
DATA showing on front end,but it is not populating into base table AP_INVOICE_DISTRIBUTIONS_ALL.
>
Are you saying you can see the distributions from front end but not in the table?
Did you populate the distribution related columns in AP_INVOICE_LINES_INTERFACE (e.g. DIST_CODE_COMBINATION_ID)?
Sandeep Gandhi

Mac Pro will not restart from dropdown menu

Hi all,
My Mac Pro will not restart from the dropdown menu or when clicking the 'restart computer' when installing software updates. I have an external firewire hard drive hooked up as part of my backup process. It contains a clone of my startup disk.
I have tried disconnecting the firewire drive, rebooting then attempting to restart from the dropdown menu. Still no joy. I always have to end up shutting down manually by holding the power button in and then restarting with the power button.
Any thoughts?
Thanks in advance.
Dennis

You might try Safe Mode (It will take more time to startup in Safe Mode because it runs a directory check.)
If your Shutdown functions correctly that way, go to System Preferences >> Accounts >> Login Items, and remove them. Boot normally and test. If not go to ~(yourHome)/Library/Contextual Menu Items and move whatever is there to the desktop. Then do the same with /Library/Contextual Menu Items. Lastly, try moving ~(yourHome)/Library/Fonts to your desktop and restarting.
Log out/in or restart, if that sorts it start putting items back one at a time until you find the culprit.
EDIT: Also, if you can launch Activity Monitor in your Utilities folder and see if you can find the process that is still running.
-mj
Message was edited by: macjack

Item not populating from CCM into shopping

Hi Gurus,
The Excel file has been uploaded and published successfully into CCM but when the only one line is not getting populated when that item is used in the shopping function the source of supply box is blank and has to be manually populated. Early solution will be rewarded pl.
Regards,
Raj

Hi,
The field Supplier will be automatically carried to the procurement catalog from the Supplier Catalog, you should ensure the Supplier is a valid vendor in SRM - you can check this by implementing the coding from note 487917 and checking the OCI data in SLG1 for object BCT1.
Regards,
Jason

Code not readable from different computers

I was testing my site from a different computer than the one
I used to design the site, so I copied the entire site folder onto
a flash drive and loaded it on a desktop that did not have
Dreamweaver installed on it. The site loaded fine in the browser,
Spry Menu Bar included but when I decided to make a change and
tried to load the html file in microsoft word, it gave me a message
saying "missing file ... SpryMenuBarHorivontal.css." The file *was*
in the folder in its proper place. When I loaded it anyway, it
looked like gibberish. When I then re-loaded the file in the
browser, the menu bar now displayed as a simple text list of links.
Loading the code on my DW computer did not revert it to the Spry
menu bar format - it still loaded as a simple list.
I am worried that I will not be able to make simple changes
to the text content on ths site without having DW on hand. What is
it that is preventing the code from translating? Before I got DW, I
constructed a page right from html on this computer without
problems. Is it the CSS that's confusing the other computer?

>If there are any site root relative paths used, they will
not work.
Unless site-root paths were added without my knowledge, I
don't have any. (Are they added by default as part of the Spry menu
bar?) Also, wouldn't the web site also display improperly in the
browser if the paths didn't work, not just the code reading
improperly?
>Put the site on a web server to view it on a different
computer.
I can't put it on a web server because I'm making the site
for someone else and I don't have server details. Also, I need to
know that that person will be able to edit the file without DW, not
just view the site. You need to have the file on your computer for
that, don't you?
>WHY would you use Word to edit it? Why?
Because I didn't have a program specifically designed for
html files on that computer, because word can handle html just fine
(in my previous experience, at least) and because I prefer its
interface to that of notepad. Is there any reason why *not* to use
Word in this situation?

Tax Code not copied from Billing to Accounting

Hi,
I have a case wherein the tax code is not being copied over from an intercompany Invoice to Accounting line items.
The conditon record at Billing Header (MWST) has a tax code of B4. The Tax code at the Accouting Line Items is coming out as Blank. The VAT number however is correctly defined.
What we did notice is that this would occur when the MWST is determined as 0%. For non-zero data, the tax code gets copied over.
Does anyone have any idea why its happening this way.
Thanks n Regards
Dharmendra Rara

Hi Dharmendra,
Please note that the SD-FI interface changed
from earlier releases. The note 400766 eplxains the checks made.
So it is possible that now you get error message FF805, when in an
earlier release you didn't get it, eventhough no customizing change.
However please note =>
In the vast majority of cases, error FF805 occurs because of an error
in your pricing procedure. The previously attached note 112609 explains
in detail how tax codes are transfered to conditions.
The note 400766 explains the checks performed by the system on the Tax
codes:
1. system checks whether there is a revenue line for each tax line.
2. in the reverse case, for each revenue line containing a certain
tax indicator there must be a tax line with this indicator.
If the tax condition has condition value zero and condition base
value zero, then it is not transferred to FI.
If you have revenue lines containing a tax indicator XX, but no
tax line with tax indicator XX, then the error FF805 issues, and
it is justified. => Please check these informations.
I hope this is helpful.
Regards,
Alex

Report's condensed codes not working from windows 2000

i m using reports 2.5 , i have a character base report with condense codes
that report runs fine from win98 but not from win2000

I´ve just follow the url to the Microsoft Article and read it, there´s was the solution...
Simple... on the advanced tab in the printer Properties I've clear the option "enable advanced printing features". So, the printing process on the Microsoft XP plataform it's all fine.
Thanks

Bookmarks will not load from dropdown menu

Hi,
i copied a lot of bookmarks over from safari to add to my existing bookmarks in firefox. The import seemed to work fine at first but soon i found that the drop down menus for my bookmarks toolbar would not load. Sometimes some and not all will load, sometimes not at all. If I open a sidebar, I can see that all my bookmarks still exist. Some have picture icons next to them, some have a blank white page icon. The ones with the blank page icons don't load from the sidebar.
I'm not the most technical and it took me hours to arrange my bookmarks. Any fix for this without having to start from scratch would be really helpful.
thanks!
Henry.

You might try Safe Mode (It will take more time to startup in Safe Mode because it runs a directory check.)
If your Shutdown functions correctly that way, go to System Preferences >> Accounts >> Login Items, and remove them. Boot normally and test. If not go to ~(yourHome)/Library/Contextual Menu Items and move whatever is there to the desktop. Then do the same with /Library/Contextual Menu Items. Lastly, try moving ~(yourHome)/Library/Fonts to your desktop and restarting.
Log out/in or restart, if that sorts it start putting items back one at a time until you find the culprit.
EDIT: Also, if you can launch Activity Monitor in your Utilities folder and see if you can find the process that is still running.
-mj
Message was edited by: macjack

Value is not populating in field through search help f4

Hello Expert,
I have made one field as a search help but data is not populating from popup.
Data is coming from BP_search_help. Here i did not create any search help in se11. not required here.
i used Code in get_p method.
Method GET_P_BP_NUMBER.
CASE iv_property.
    WHEN if_bsp_wd_model_setter_getter=>fp_fieldtype.
      IF iv_display_mode EQ abap_true.
        rv_value = cl_bsp_dlc_view_descriptor=>field_type_event_link.
      ELSE.
        rv_value = cl_bsp_dlc_view_descriptor=>field_type_input.
      ENDIF.
    WHEN if_bsp_wd_model_setter_getter=>fp_onclick.
      rv_value = ' '. "EC NOTEXT
ENDCASE.
ENDMETHOD.
GET_V Method.
DATA: ls_map TYPE if_bsp_wd_valuehelp_f4descr=>gtype_param_mapping,
        lt_inmap TYPE if_bsp_wd_valuehelp_f4descr=>gtype_param_mapping_tab,
        lt_outmap TYPE if_bsp_wd_valuehelp_f4descr=>gtype_param_mapping_tab.
ls_map-context_attr = 'STRUCT.BP_NUMBER'.
ls_map-f4_attr = 'PARTNER'.
APPEND ls_map TO: lt_inmap,lt_outmap.
CREATE OBJECT rv_valuehelp_descriptor TYPE cl_bsp_wd_valuehelp_f4descr
        EXPORTING
          iv_help_id        = 'BP_HEAD_SEARCH'                            "#EC NOTEXT
          iv_help_id_kind = if_bsp_wd_valuehelp_f4descr=>help_id_kind_dtel
          iv_trigger_submit = 'X'
          iv_input_mapping = lt_inmap
          iv_output_mapping = lt_outmap
endmethod.
But when i activate get_v method .i am getting 1 error.
Error is
Please help me how to rectify this error and any other way to populate data in field through f4 help.
If u want more detail. Please follow attachment.

Hi Madhuri,
You can refer the below code for search help for partner. The code has to be written on GET_V_XXX method.
DATA: ls_map TYPE if_bsp_wd_valuehelp_f4descr=>gtype_param_mapping,
         lt_outmap TYPE if_bsp_wd_valuehelp_f4descr=>gtype_param_mapping_tab.
   ls_map-context_attr = 'STRUCT.BP_NUMBER'.
   ls_map-f4_attr = 'PARTNER'.
   APPEND ls_map TO lt_outmap.
   CREATE OBJECT rv_valuehelp_descriptor TYPE cl_bsp_wd_valuehelp_f4descr
     EXPORTING
       iv_help_id        = 'UIF_BUPAP_WIDE_COL'    ""Search help name
       iv_help_id_kind   = if_bsp_wd_valuehelp_f4descr=>help_id_kind_comp
       iv_trigger_submit = abap_true
       iv_input_mapping = lt_inmap
       iv_output_mapping = lt_outmap.
Thanks,
Ritu

Managed Server not populating while installation in SOA server detail

I am facing an issue in installation of AIA. In the screen SOA server detail, managed server is not populating in dropdown option. I have installed Weblogic middle ware fusion in which admin server and managed server is running. Both are configured for by own machine and clustering is not done
I want to know these things.
1) Is there any problem with weblogic installation or configuration. Managed server and admin server is running fine
2) Do i need to configure node management to map admin server and managed server in fusion middleware?
3) Is there any compatibility mode issue? I am running the setup as administrator in window 7 OS for 32bit windows
Please help me in resolving this issue.
Thanks

Check for the following in your target soa server:
1. SOA components are correctly deployed.
2. soa-infra deployment is running and healthy.
3. node manager is able to start and stop the managed server properly.

Six-digit verification code not recieved

six-digit verification code not received from icloud to activate keychain on my iphone

Hello there, stephmar.
The following Knowledge Base article offers up some great recommendations if you're not receiving the verification code for activating iCloud Keychain:
Get help using iCloud Keychain - Apple Support
First, check Apple System Status to see if there's a current service outage and find out if iCloud Keychain is available in your country.
I'm not receiving the verification code via SMS.
Make sure that you have a strong cellular network connection on your phone.
Make sure that your phone number can receive SMS messages. You can do this by asking someone to send you a text message.
Make sure that the correct phone number is associated with your account:
In iOS 8, tap Settings > iCloud > Keychain > Advanced. In iOS 7, tap Settings > iCloud > Account > Keychain. Make sure the phone number under Verification Number is correct. If not, enter another phone number.
In OS X Mavericks v10.9, choose Apple () > System Preferences. Click iCloud, then click Account Details. Make sure the phone number under Verification number is correct. If not, enter another phone number.
If you can't access a device that has iCloud Keychain enabled, contact Apple Support and verify your identity to get help completing iCloud Keychain setup.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

My bookmarks used to appear in dropdown menu from the address bar on my iMac G5. I switched to Mac Notebook & from Leopard to Lion. Now my bookmarks are not accessible from the address bar anymore (the line where you type in the website address)

'''My bookmarks used to appear in dropdown menu from the address bar on my iMac G5. I switched to Mac Notebook & from Leopard to Lion. Now my bookmarks are not accessible from the address bar anymore (the line where you type in the website address)'''

There appears to be a problem with Firefox 20 with UNC paths when using roaming profiles on a server.
*[[/questions/955140]] why is the 20.0 address bar unresponsive?
This is currently investigated and tracked via this bug report.
*[https://bugzilla.mozilla.org/show_bug.cgi?id=857672 bug 857672] - Address Bar not working (roaming profiles;UNC path support OS.File)
<i>(please do not comment in bug reports: [https://bugzilla.mozilla.org/page.cgi?id=etiquette.html])</i>

Company Code data to be populated from BDOC

Hi,
I am working on the Replication of the BP's from CRM to R/3.
The replication of BP from CRM to R/3 is happening properly.
In the R/3 system,All the sales area data is populated.But the House Bank data in the Payment Transactions tab of the company code is not getting populated.
I checked in the event DE_BALE.The segment e1knb1m is not populated which holds the House bank data.
How can this be populated?
Pls advise.
Thanks.
Muraghendra D

Hi,
Any clues on this pls.
Thanks.
Muraghendra D

Unique problem Screen is not Getting data populated from BDC_DATA itab

Hi Gurus,
I have an unique problem, I have an custom transaction (module pool) and which first runs an ALV report displays an QM Records, There is an command button at the top of the report to create new defect, where i provide the Material Number, Supplier and Defect Code, and then if i press create it should navigate to standard transaction QM01 and It should create a new defect code.
Issue:
The recording runs fine till providing Material Number, Supplier and Defect Code of ZTCODE when it navigates to QM01, the whole executions just stops, i dont know why it is moving ahead. If i try to skip and come out of standard transaction also no improvement and all manually i should come out.
Comparision with recording Made in ZTCODe and QM01.
If i record the same activity directly with QM01 and if i try to run the recording, it runs perfectly.
if i am trying to record it through Z module pool where it will navigate to standard transaction code QM01, it stops when it reaches QM01, i am getting this error. i dont know why.
I have attached the code for your reference, kindly suggest me what can be the problem.
MY CODE:
perform bdc_dynpro      using 'ZQRPCCOMEX_NEW_SWCB' '1000'.
perform bdc_field       using 'BDC_OKCODE'
                              '=FC_DEFC'.
perform bdc_field       using 'P_VAR'
                              '/VEHICLEPROJ'.
perform bdc_field       using 'BDC_CURSOR'
                              'S_NITG-LOW'.
perform bdc_field       using 'S_QMDAT-LOW'
                              '03.09.2010'.
perform bdc_field       using 'S_QMDAT-HIGH'
                              '03.03.2011'.
perform bdc_dynpro      using 'ZQRPCCOMEX_NEW_SWCB' '1000'.
perform bdc_field       using 'BDC_OKCODE'
                              '=ONLI'.
perform bdc_field       using 'P_VAR'
                              '/DEFECT_CODE'.
perform bdc_field       using 'BDC_CURSOR'
                              'S_NITG2-LOW'.
perform bdc_field       using 'S_NITG2-LOW'
                              'G22C'.
perform bdc_dynpro      using 'SAPLSLVC_FULLSCREEN' '0500'.
perform bdc_field       using 'BDC_OKCODE'
                              '=NEW_DC'.
perform bdc_dynpro      using 'ZQRPCCOMEX_NEW_SWCB' '9507'.
perform bdc_field       using 'BDC_CURSOR'
                              'W_SCR_REFNUM'.
perform bdc_field       using 'BDC_OKCODE'
                              '=OK'.
perform bdc_field       using 'W_SCR_MATNR'
                              'G22C'.
perform bdc_field       using 'W_SCR_LIFNR'
                              '220947-00'.
perform bdc_field       using 'W_SCR_REFNUM'
                              'C_DEF_11'.
            it is not executing from here these screens belongs to QM01, it stops the whole execution
perform bdc_dynpro      using 'SAPLIQS0' '7200'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
perform bdc_field       using 'BDC_CURSOR'
                              'RQM00-MAWERK'.
perform bdc_field       using 'RQM00-MAWERK'
                              'CTT'.
perform bdc_field       using 'VIQMEL-QMCOD'
                              '0120'.
perform bdc_dynpro      using 'SAPLIQS0' '7200'.
perform bdc_field       using 'BDC_OKCODE'
                              '=BUCH'.
perform bdc_field       using 'BDC_CURSOR'
                              'RQM00-MAWERK'.
perform bdc_field       using 'RQM00-MAWERK'
                              'CTT'.
perform bdc_field       using 'VIQMEL-QMCOD'
                              '0120'.
perform bdc_dynpro      using 'SAPLSLVC_FULLSCREEN' '0500'.
perform bdc_field       using 'BDC_OKCODE'
                              '=&F12'.
perform bdc_dynpro      using 'ZQRPCCOMEX_NEW_SWCB' '1000'.
perform bdc_field       using 'BDC_OKCODE'
                              '/EECAN'.
perform bdc_transaction using 'ZM11'.
The screen gets hanged up in the QM01 screen and where the mandatory fields are not getting populated and thats it execution is not happening at any screens if i am trying to come out of transaction.
Assumption - Correct me if iam wrong.
There can be complication while calling a Ztcode (module Pool) which in turns calls a Standard Tcode.
Thanks & Regards,
S.Saravanan

HI,
Check the recording i think the recording does not contain the initial screen i.e SAPLIQS0 200.
Re record the bdc or just add the initial screen in the BDC
perform bdc_dynpro using 'SAPLIQS0' '200'.
perform bdc_field using 'RIWO00-QMART' 'Q!' " What ever notification type u have
perform bdc_field using 'BDC_OKCODE' '/00'.
This will sove ur problem .
Regards,
Madhukar Shetty

Switch Code Not Populating from Dropdown

Similar Messages

Maybe you are looking for