SXMB_MONI: Message status: Log Version ?

Hi,
We have a couple synchronous messages that have the "Log Version" status in the integration engine (ABAP stack tcode: sxmb_moni). It is a white circle icon. If we click on the legend (in sxmb_moni), we do not see this status (we see all the others green flag, race flag, etc)
If we click in theses messages, only the following 4 pipeline steps are done (Inbound message + Receiver message + Interface Determination + Message Branching) we do not see all the others (Request message mapping, call adapter).
What is the meaning of this status ?
Thanks !

from help.sap.com
<i>This message version was generated by logging and does not have a particular status.</i>
since yours is a sync scenario most probbaly what happend is that the response system was locked at the time request was send hence no response was received.
we had the same problem and we re-send the message from sender system and it wen't through properly
Thanx
Aamir
Note:i m still unable to figure out if its possible to re-send this from sxmb_moni,may be its not possible,also m not sure why we didn't get timeout error but got this one,may be some expert can shed some light on it.

Similar Messages

Status "log version" in message monitor

Hi,
In a proxy to JDBC scenario, i'm getting status "log version" in sxmb_moni.
I'm trying to insert some records in target JDBC file and recovery JDBC response in a synchronous message interface.
However, i never have ssen JDBC response .
Why?
What does "log version status" means?
Thanks ,
Carme Alentorn

Hi Carme,
The meaning of Log version is " When ever wrong entry field pass to the target end the problem will be raised.
(Spicial chacters or more fields extra)
I think it exatly data will be wrong.check ur data end.
and check the adapter status.
Regards,
Sateesh

XI3.0 SXMB_MONI - Message Status - Automatic Restart

Hello,
I am using XI3.0 to pass thu file from file server to BW system. When I pass the file , the file adapter log shows it passed nut in SXMB_MONI transaction the Status field shows the message as AUTOMATIC RESTART . After Half an hour or so it converts into chequered flag ie. converted successfully. I think the file remains in Queue.
Can anyone suggest the cause and solution to this problem?
Thanks,
Pushpendra Srivastava

Dimitry,
I dont know if you can disable automatic restart, but you can try to delete messages from Integration Engine. There are various ways to do that.
1. In ABAP-stack. Transaction SMQ2, try to delete all messages currently stored in queues or try to identify based on time the exact message that is restarting.
2. In J2EE-stack. In RWB, go to Message Monitoring, select time frame when this message first occurred. After, there is a button cancel to cancel processing of each individual message.
Hope this helps,
Dmitriy Mindich

SXMB_MONI - Message Status - Automatic Restart

Hello,
When a message in transferred, in transaction SXMB the message has an "AUTOMATIC RESTART" icon. Other messages stuck in the queue and are waiting for the message to restart.
Only after some time, the "AUTOMATIC RESTART" icon converts to "Red Flag" icon.
I would like to know if there is a way to stop the "Automatic restart" of the messages in transaction SXMB_MONI.
Please Advice,
Dimitry

Dimitry,
I dont know if you can disable automatic restart, but you can try to delete messages from Integration Engine. There are various ways to do that.
1. In ABAP-stack. Transaction SMQ2, try to delete all messages currently stored in queues or try to identify based on time the exact message that is restarting.
2. In J2EE-stack. In RWB, go to Message Monitoring, select time frame when this message first occurred. After, there is a button cancel to cancel processing of each individual message.
Hope this helps,
Dmitriy Mindich

How to Dal with Log Version in SXMB_MONI

DEAR EXPERTS,
sCENARIO:
FILE-----> PI -
> SAP ECC
Sender - File adapter
Recv - Proxy
Mode_ Sync.
Some of the messages are going to STATUS - *Log Version IN SXMB_MONI. This is happening Intermitently.
How to avoid log version in sxmb_moni..Any SAP Note available.....
Take care,
Pooja

This probelm occurs randomly... There are no data related isues.
there may not be a solution to this problem...may be just a precaution......just check with the end system developers and verify what was the status of the application when they processed the Req from XI (for which you got Log Version).....
Other way to deal with this problem is resend the message.....AFAIK there seems to be no other way out.....if you find any then please let me know
Regards,
Abhishek.

LOG VERSION STATUS IN MONI

Hi Guys,
i am getting synchronous messages status as " TO BE DELIVERD" in Runtime workbench-Integration engine monitoring, i tried to resend this to be deliverd message from Runtime work bench i'm getting error mesaage " Unable to schedule 1 of 1 messages for processing; update the status"
how i will update the status as per above message ?
when i checked with same message id in MONI, its showing as status "LOG VERSION ".
Can any one help me on this how to resolve this issue..
Thanks,
Siva

Hi,
Messages might got blocked in SMQ2.
If you found messages in Queue double click on the queue --> if there is any issue in the messages ---> double click on the messages which redirects you to moni try to rectify the error and reprocess again
Regards,
naveen

XI monitoring log version

Hello,
Can you please anybody tell me what is log version in SXI_Monitor. I have a HTTP to RFC synchronous scenario. For of my message i can message status as log version and i dodnt see any response in Moni. This is happending for few messages.
Please help me abt this.
Thanks,
Vishal

> Can you please anybody tell me what is log version in SXI_Monitor. I have a HTTP to RFC synchronous scenario. For of my message i can message status as log version and i dodnt see any response in Moni. This is happending for few messages.
>
Hi,
The synchronous scenarios are not stored in XI database (they are not persisted). In order to see them in SXMB_MINI, you have to change the log level to 2. This can be done in SXMB_ADM - Integration Engine Configuration -RUNTIME - LOGGING SYNC to 1.
The status log version shows that the message got processed in IE.
VJ

MONI Message Status as Log Version

Hi Guys,
In MONI few of messages getting status as Log Version..Could any one plesae let me know why ? and what is best way of solution for this...
Thanks,
Siva...

It is the processing instance of the mesg. If you restart the mesg for failure reason, it will version until execute successfully with version numbers.
Refer this link if you have problem in the proxy side
Log version in sxmb_moni in recever system (soap to proxy scenario)

Log version status for message in PI message monitoring

Hi All,
we send IDocs from ECC to PI and then external systems. It's working fine all the time But third party system did not recieve only one message out of many. This missing message showing in PI is like LOG version when I look at in monitoring.It was happend long back and its still showing as scheduled.
And also there were no pending messages in the queue.
any idea what happend for this message exactly ?
Thanks .

Hello
Check the notes below:
#1471001 PI monitor: Synchronous response is displayed as log version
#1256891 Logging errors in synchronous communication
These may help explain/fix the error.
Regards
Mark

Log version in SXMB_MONI

what is the meaning of this particular message ?? If this error occurs where and what should we check ?? How to sort out the problem ??
Log version
This message version was generated by logging and does not have a particular status.
thanks
kumar

Hi Palnati
refer the below links
/people/sap.user72/blog/2005/11/29/xi-how-to-re-process-failed-xi-messages-automatically
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/003de490-0201-0010-68a4-bf7a1e1fd3a5
http://help.sap.com/saphelp_nw04/helpdata/en/44/f5c3de84056c30e10000000a114a6b/content.htm
http://help.sap.com/saphelp_nw70/helpdata/en/0f/80243b4a66ae0ce10000000a11402f/frameset.htm
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e01e9400-9e81-2910-20a5-a862945a5e98
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/6a90d6aa-0b01-0010-8a83-cf0e6c70dcce
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/bd5950ff-0701-0010-a5bc-86d45fd52283
Hope this will solve ur issue related to SXMB_MONI
<b>Pls reward if useful</b>

Log version status in Integration Engine

Hi,
When montioring in Integration engine, couple of my messages are in 'Log version' status. These messages are in this status for the past two days.
We are not able to cancel these messages also.
What is the workaround solution to these messages.
Thanks,
Swapna

It could be due to huge processing of message/data
Do a complete cache refresh and check the same
The solution in this thread points to XI BATCH.
Log version in sxmb_moni in recever system (soap to proxy scenario)
Edited by: Anusha Ramsiva on Aug 6, 2008 2:57 PM

SXMB_MONI : Log Version

Hi Everybody,
I am working on a SOAP to Proxy Synchronous Scenario.When I am testing this interface we are getting a log version entry (Grey coloured dot symbol) in SXMB_MONI whenever the response fails from ECC and sometimes doesn't update SXMB_MONI even after processing.
Is there any setting we have to do remove this log version entry.
Can somebody help me out on this?
Helpful answers will be rewarded points.
Thanks & Regards,
Zabi

Hi,
RWB shows the status of the messages as "Canceled with Errors".
But my concern is the log version status in SXMB_MONI.
Is there any way of getting rid of this status?
Thanks,
Zabi

Log version status does not change

Hi,
For a synchronous scenario, I'm getting the status as 'Log Version' in sxmb_moni and the status doesnot change at all. Can you please let me know the reason for this and how the message status can be changed to successful.
Thanks
Sreenivas

HI,
This already explained in above note please do accordingly..
See below..
Symptom
Synchronous messages with message status 001 were made persistent in the database. This can occur, for example, when synchronous messages are being logged. These messages are not deleted by the Delete job.
Other terms
Delete, synchronous messages, message status
Reason and Prerequisites
You use the SAP NetWeaver Exchange Infrastructure.
Solution
Implement the attached correction instructions or import the Support Package listed below.
See the note.. for more details..
Note 930181 - Deletion of synchronous messages with message status 001.
Also see the note
Note 820149 - Deletion of manually changed and terminated messages
Also see the below threads
sxmb_moni, table sxmspmast, Messages with ICON_LED_RED, report RSXMB_SELECT
SXMB_MONI: LogVersion
Points rewarded if it is useful....
Regards
Chilla..

BPM wait step : RWB"To Be Delivered status": SXMB_MONI"Message being sent"

Hi All,
I have a BPM interface running fine since 1 year.
In this BPM I have wait step for 5 minutes.
But yesterday message is stopped on wait and not proceeding ahead.
I checked XML is good as per mapping. and in runtime wirk bench message is still in "To Be Delivered status"
and in SXMB_MONI message column Outbound Status still showing "Message being sent" even after 12 hours.(wait is only 5 minutes). And below is the trace of last message.
Please guide how to handle or restart this message. in SMQ1 & SMQ2 there are no queues showing:
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Trace xmlns:SAP="http://sap.com/xi/XI/Message/30">
<Trace level="1" type="T">--start determination of sender interface action</Trace>
<Trace level="1" type="T">select interface Request_SI</Trace>
<Trace level="1" type="T">select interface namespace https://www.XXXXX.com/YYYY</Trace>
<Trace level="1" type="T">--start determination of receiver interface action</Trace>
<Trace level="1" type="T">Loop 0000000001</Trace>
<Trace level="1" type="T">select interface Request_SI</Trace>
<Trace level="1" type="T">select interface namespace https://www.XXXXX.com/YYYY</Trace>
<Trace level="1" type="T">--start determination of sender interface action</Trace>
<Trace level="1" type="T">Hence set action to DEL</Trace>
</SAP:Trace>
Regards

Solved, few BASIS jobs were inactive in transaction code "SWF_XI_CUSTOMIZING".

How to delete the messages from sxmb_moni with status cancelled

Hi ,
how to delete the messages from sxmb_moni with status cancelled
Is there any report for this
Regards
Suman

I think just for deleting the jobs you can do this only
Scheduling Delete Jobs
To schedule delete jobs, proceed as follows:
       1.      In the Integration Engine -
> Administration menu, choose Schedule Delete Jobs.
       2.      Select the job(s) to be scheduled.
       3.      Specify the start time and date.
       4.      Specify the period you want to use and choose Schedule.
For an overview of all jobs, choose Jobs.

SXMB_MONI: Message status: Log Version ?

Similar Messages

Maybe you are looking for