Sybase running as backend with 10gAS
Would this be a stable combination? Anyone?
What do you mean by backend? Not the Infrastructure database, I suppose. That would not be possible.
If it is your application database, than it is no problem. It doesn't matter to which database your application connects.
Similar Messages
-
How to protect an application running on IIS with OAM 11gR2
Hello Gurus,
I have a question regarding protecting an application running on IIS with OAM 11gR2. We have an OHS server running and all the requests from the users are coming to this OHS server webgate for them to login using the SSO login page. These is all solaris. I am protecting other applications like pplsoft moduels with this OHS instance and OAM server. There is another application that I need to protect which is itself running on IIS windows machine. I need guidance as to -
1.) Do I need to install a windows version of webgate to protect this IIS based application?
2.) Or I can still protect and proxy requests from this application to current OHS instance? How can I do this?
3.) Or Do I need to proxy requests directly from IIS to OAM weblogic server?
Please advise to the earliest as this is an urgent issue.
Thanks !!From your description it is not clear how exactly architecture looks like
We have an OHS server running and all the requests from the users are coming to this OHS server webgate for them to login using the SSO login page.
is this OHS centralized login farm ? (Case 1)
OR is this OHS server (with webgate) acting as virtual web server hosting multiple web sites so that request to any site passes through this OHS/webgate (Case 2)
1.) Do I need to install a windows version of webgate to protect this IIS based application?
If case 1 then you need to install 10g webgate on top of IIS server to protect this application
If case 2 then you can just proxy request from OHS to IIS server. As every request passes through OHS user will be authenticated before request hits IIS
Look at Product documentation for virtual web sites : http://docs.oracle.com/cd/E27559_01/admin.1112/e27239/shared.htm#autoId12
It has steps to protect virtual web sites.
Also you need to make sure no one hits IIIS web sites directly.
Hope this helps -
OCDM - Sample Report Installation issue - Runs too longer with No progress
Hello,
As a part of OCDM environment setup for Practice we were successful installing following :
* Supported Enterprise Linux
* Oracle DB 11g R2 (OLAP & MINING option)
* OWB was already installed as a part of Oracle DB 11gR2 - just unlocked the OWB accounts.
* Installed OBIEE 11g R2 installation - Installation successful and able to open url's. (analytics and BI Publisher etc.) - Issue with login account.
* Installation of Communication Data Model (First Installation type from OCDM Installer)
When we try to install Sample Reports at same stage the screen remain open and runs too longer with No progress.
The Installation process for OCDM Sample Reports is given in the attached doc with screenshot and the log file is also included in the attached document.
Please let us know the following two issue:
1) How to login to Analytics after OBIEE 11gR2 installed on Linux - ( in our case we use user as Administrator and tried password same as username, even checked with the user weblogic and other but no success. Please provide us the information which give details(document) about the Administartion of OBIEE 11gR2 on Linux).
2) The issue with installation of OCDM Sampple Reports though successful installation of OCDM Data Model.(First Installation Type from OCDM Installer)
Thanks & Best Regards,
Amol Thite
I think, I cant Attach the file here and character limit is 30K for the post here so putting below the few lines of Log File content:
I can email the screen shots docs and complete log file on request if needed.
It stuck in Configuration Assistance screen -
After more than 1 hour the same screen – No progress – I tried 3 times but same issue. Log file also not growing and seems its waiting for some dependent thing that need to happen before it proceed.
=====start few lines of Log File=======================================
The file oraparam.ini could not be found at /u01/app/oracle/product/11.1.0/db_1/oui/bin/oraparam.ini
Using paramFile: /u01/app/oracle/product/11.1.0/db_1/oui/oraparam.ini
Checking swap space: must be greater than 500 MB. Actual 1027 MB Passed
Checking monitor: must be configured to display at least 256 colors. Actual 65536 Passed
The number of files bootstrapped for the jre is 689.
The number of files bootstrapped for the oui is 77.
Using the umask value '022' available from oraparam.ini
=====end few lines of Log File==================================
INFO: Copying Aggr XML for: Oracle Communications Data Model
INFO: The Top level Aggreage File = /u01/app/oracle/product/11.1.0/db_1/inventory/ContentsXML/ConfigXML/oracle.ocdm.11_2_3_0_0.xml
INFO: deleted all the required instance files
INFO: OUI_CAPlugIn is not found in XML
INFO: cf session will be created for OH: /u01/app/oracle/product/11.1.0/db_1/ TLAggr: oracle.ocdm instancePath: inventory/ContentsXML/ConfigXML/
INFO: cf session for OH: /u01/app/oracle/product/11.1.0/db_1/ TL Aggr: [oracle.ocdm] instancePath: inventory/ContentsXML/ConfigXML/
INFO: aggr ref length : 2
INFO: cf session hashcode: 22855989
INFO: cf session saved with key: OraDb11g_home1 oracle.ocdm
INFO: cf session is ok
INFO: created and saved cf session for oh: OraDb11g_home1
INFO: passing params to cf
INFO: Handling the storing of variables for aggr name oracle.ocdm
INFO: This variable sl_ASMSelectableDiskGroups is not added to the global context map
INFO: This variable s_scratchPath is not added to the global context map
INFO: exitonly tools to be excuted passed: 0
INFO: Starting to execute configuration assistants
INFO: Command = oracle.ocdm.OCDMCfgPlugIn /u01/app/oracle/product/11.1.0/db_1/ocdm/ocdm_install.sh ${s_dbSysPasswd}
OCDMCfgPlugIn: Starting OCDM configuration...
OCDMCfgPlugIn: OCDM configuration initialized, waiting for script response...
OCDMCfgPlugIn: Receiving SYSTEM password...
OCDMCfgPlugIn: Passing SYSTEM credentials to configuration script...
OCDMCfgPlugIn: SYSTEM credentials passed to configuration script.
OCDMCfgPlugIn: SYSTEM password received.
OCDMCfgPlugIn: Initializing config parameteres...
OCDMCfgPlugIn: Creating log folder...
OCDMCfgPlugIn: ocdm log folder exist
OCDMCfgPlugIn: Exporting config env...
OCDMCfgPlugIn: Performing OWB check...
OCDMCfgPlugIn: Installing OWB...
OCDMCfgPlugIn: WARNING: OWB OWNER already exists.
OCDMCfgPlugIn: Archive: /u01/app/oracle/product/11.1.0/db_1/ocdm/pdm/relational/sample_schema/ocdm_sample.dmp.zip
OCDMCfgPlugIn: inflating: /u01/app/oracle/product/11.1.0/db_1/ocdm/install_tmp/ocdm_sample.dmp
OCDMCfgPlugIn: 2011_02_28_11_24_30 10 % complete
OCDMCfgPlugIn: Importing OCDM sample schema
==================end of log File ========================================Hi Please check my answers
1) How to login to Analytics after OBIEE 11gR2 installed on Linux - ( in our case we use user as Administrator and tried password same as username, even checked with the user weblogic and other but no success. Please provide us the information which give details(document) about the Administartion of OBIEE 11gR2 on Linux).
The current OCDM version does not support BIEE 11g, so you need to install BIEE 10g. In next release(will be available soon), OCDM will support BIEE 11g.
2) The issue with installation of OCDM Sampple Reports though successful installation of OCDM Data Model.(First Installation Type from OCDM Installer)
The importing will take a long time, you can login database with ocdm_sample_sys/ocdm_sample_sys, and use "select count(*) from tabs;" to monitor the import process. -
Unable to run code analysis with WDK 9926
Hi,
I am trying to run code analysis with WDK 9926 and seeing below issue? can anybody help me to resolve this ?
Error:
====
C:\sw\dev\T4\windows\Src\kernel\vbd>msbuild.exe cht4vbd.vcxproj /p:Configuration="Windows 8.1 Debug" /P:Platform=x64 /P:RunCodeAnalysisOnce=True
Microsoft (R) Build Engine version 12.0.21005.1
[Microsoft .NET Framework, version 4.0.30319.33440]
Copyright (C) Microsoft Corporation. All rights reserved.
Build started 4/7/2015 12:08:30 AM.
Project "C:\sw\dev\T4\windows\Src\kernel\vbd\cht4vbd.vcxproj" on node 1 (defaul
t targets).
DriverBuildNotifications:
Building 'cht4vbd' with toolset 'WindowsKernelModeDriver10.0' and the 'Deskto
p' target platform.
Using KMDF 1.11.
PrepareForBuild:
Creating directory "x64\Windows8.1Debug\".
Creating directory "C:\sw\dev\T4\windows\Src\kernel\vbd\x64\Windows8.1Debug\c
hk\x64\".
Creating directory "x64\Windows8.1Debug\cht4vbd.tlog\".
InitializeBuildStatus:
Creating "x64\Windows8.1Debug\cht4vbd.tlog\unsuccessfulbuild" because "Always
Create" was specified.
StampInf:
c:\Program Files (x86)\Windows Kits\10\bin\x86\stampinf.exe -d "*" -a "amd64"
-k "1.11" -f x64\Windows8.1Debug\chvbdx64.inf
Copying "C:\sw\dev\T4\windows\Src\kernel\vbd\chvbdx64.inf" to "x64\Windows8.1
Debug\chvbdx64.inf" for stamping
Using version information from c:\Program Files (x86)\Windows Kits\10\Include
\shared\\ntverp.h
Could not open version header file c:\Program Files (x86)\Windows Kits\10\Inc
lude\shared\\bldnump.h. (0x00000002)
Could not determine version information. Please specify using -v option.
Updates common INF file directives
USAGE:
stampinf -f filename [-s section] [-d <xx/yy/zzzz> | *]
-a architecture -n [-c catalogfile]
[-v <w.x.y.z> | *]
[-k nnnnn] [-u nnnnn]
[-i path]
-f specifies the INF file to process
-s specifies the INF section to place the DriverVer= directive. By
default this directive is placed in the [Version] section.
-d specifies the date written in the DriverVer= directive. Note that
a '*' given for a date value means for stampinf to write the
current date. If the date is not specified, the date is taken
from the STAMPINF_DATE environment variable.
-v specifies the version written in the DriverVer= directive. Note
that a '*' given for a version value means for stampinf to write
the current time (h.m.s.ms). This is useful during development
in order to get increasing version numbers. If the version is not
specified, its value is taken from the STAMPINF_VERSION
environment variable.
-a specifies the architecture string to replace the $ARCH$ keyword.
The $ARCH$ keyword is used to tailor a TargetOSVersion decoration
in a [Manufacturer] section, as well as its respective section
name, to a specific platform. If no value is specified, stampinf
takes its value from the _BuildArch environment variable.
-c specifies the value to be written in the CatalogFile= directive
in the [Version] section. By default, this directive is not
written.
-k specifies the version of KMDF that this driver depends on. This
is used to tailor the KmdfLibraryVersion & KMDF co-installer name
in the INF. This will replace the $KMDFVERSION$ and
$KMDFCOINSTALLERVERSION$ keywords in the INF. The string is of
the format:
<major_version>.<minor_version>
As an example, supplying 1.5 as the version string will result in
values of 1.5 and 01005 for the two keywords (respectively).
-u specifies the version of UMDF that this driver depends on. This
is used to tailor the UmdfLibraryVersion & UMDF co-installer name
in the INF. This will replace the $UMDFVERSION$ and
$UMDFCOINSTALLERVERSION$ keywords in the INF. The string is of
the format:
<major_version>.<minor_version>.<service_version>
(where service_version is generally zero)
As an example, supplying 1.5.0 as the version string will result
in values of 1.5.0 and 01005 for the two keywords (respectively).
-i specifies the location of ntverp.h file.
path represent the fully qualified
location of the directory containing ntverp.h.
-n noisy mode shows verbose stampinf output
-x removes the coinstaller tag from the file and replaces the line w
ith a ";"
NOTES:
The environment variable PRIVATE_DRIVER_PACKAGE can be set to
enable stampinf's 'developer mode' behavior. When this is
set, the date and version used for DriverVer is set to the
current date and time, regardless of the command line
settings. Also, 'CatalogFile=delta.cat' is written to the
version section, unless a catalog was already specified
with '-c'.
c:\Program Files (x86)\Windows Kits\10\build\WindowsDriver.common.targets(355,5
): error MSB6006: "stampinf.exe" exited with code 1. [C:\sw\dev\T4\windows\Src\
kernel\vbd\cht4vbd.vcxproj]
Done Building Project "C:\sw\dev\T4\windows\Src\kernel\vbd\cht4vbd.vcxproj" (de
fault targets) -- FAILED.
Build FAILED.
"C:\sw\dev\T4\windows\Src\kernel\vbd\cht4vbd.vcxproj" (default target) (1) ->
(StampInf target) ->
c:\Program Files (x86)\Windows Kits\10\build\WindowsDriver.common.targets(355
,5): error MSB6006: "stampinf.exe" exited with code 1. [C:\sw\dev\T4\windows\Sr
c\kernel\vbd\cht4vbd.vcxproj]
0 Warning(s)
1 Error(s)
Time Elapsed 00:00:04.07
Thanks, KrishnaHi,
I am trying to run code analysis with WDK 9926 and seeing below issue? can anybody help me to resolve this ?
Error:
====
C:\sw\dev\T4\windows\Src\kernel\vbd>msbuild.exe cht4vbd.vcxproj /p:Configuration="Windows 8.1 Debug" /P:Platform=x64 /P:RunCodeAnalysisOnce=True
Microsoft (R) Build Engine version 12.0.21005.1
[Microsoft .NET Framework, version 4.0.30319.33440]
Copyright (C) Microsoft Corporation. All rights reserved.
Build started 4/7/2015 12:08:30 AM.
Project "C:\sw\dev\T4\windows\Src\kernel\vbd\cht4vbd.vcxproj" on node 1 (defaul
t targets).
DriverBuildNotifications:
Building 'cht4vbd' with toolset 'WindowsKernelModeDriver10.0' and the 'Deskto
p' target platform.
Using KMDF 1.11.
PrepareForBuild:
Creating directory "x64\Windows8.1Debug\".
Creating directory "C:\sw\dev\T4\windows\Src\kernel\vbd\x64\Windows8.1Debug\c
hk\x64\".
Creating directory "x64\Windows8.1Debug\cht4vbd.tlog\".
InitializeBuildStatus:
Creating "x64\Windows8.1Debug\cht4vbd.tlog\unsuccessfulbuild" because "Always
Create" was specified.
StampInf:
c:\Program Files (x86)\Windows Kits\10\bin\x86\stampinf.exe -d "*" -a "amd64"
-k "1.11" -f x64\Windows8.1Debug\chvbdx64.inf
Copying "C:\sw\dev\T4\windows\Src\kernel\vbd\chvbdx64.inf" to "x64\Windows8.1
Debug\chvbdx64.inf" for stamping
Using version information from c:\Program Files (x86)\Windows Kits\10\Include
\shared\\ntverp.h
Could not open version header file c:\Program Files (x86)\Windows Kits\10\Inc
lude\shared\\bldnump.h. (0x00000002)
Could not determine version information. Please specify using -v option.
Updates common INF file directives
USAGE:
stampinf -f filename [-s section] [-d <xx/yy/zzzz> | *]
-a architecture -n [-c catalogfile]
[-v <w.x.y.z> | *]
[-k nnnnn] [-u nnnnn]
[-i path]
-f specifies the INF file to process
-s specifies the INF section to place the DriverVer= directive. By
default this directive is placed in the [Version] section.
-d specifies the date written in the DriverVer= directive. Note that
a '*' given for a date value means for stampinf to write the
current date. If the date is not specified, the date is taken
from the STAMPINF_DATE environment variable.
-v specifies the version written in the DriverVer= directive. Note
that a '*' given for a version value means for stampinf to write
the current time (h.m.s.ms). This is useful during development
in order to get increasing version numbers. If the version is not
specified, its value is taken from the STAMPINF_VERSION
environment variable.
-a specifies the architecture string to replace the $ARCH$ keyword.
The $ARCH$ keyword is used to tailor a TargetOSVersion decoration
in a [Manufacturer] section, as well as its respective section
name, to a specific platform. If no value is specified, stampinf
takes its value from the _BuildArch environment variable.
-c specifies the value to be written in the CatalogFile= directive
in the [Version] section. By default, this directive is not
written.
-k specifies the version of KMDF that this driver depends on. This
is used to tailor the KmdfLibraryVersion & KMDF co-installer name
in the INF. This will replace the $KMDFVERSION$ and
$KMDFCOINSTALLERVERSION$ keywords in the INF. The string is of
the format:
<major_version>.<minor_version>
As an example, supplying 1.5 as the version string will result in
values of 1.5 and 01005 for the two keywords (respectively).
-u specifies the version of UMDF that this driver depends on. This
is used to tailor the UmdfLibraryVersion & UMDF co-installer name
in the INF. This will replace the $UMDFVERSION$ and
$UMDFCOINSTALLERVERSION$ keywords in the INF. The string is of
the format:
<major_version>.<minor_version>.<service_version>
(where service_version is generally zero)
As an example, supplying 1.5.0 as the version string will result
in values of 1.5.0 and 01005 for the two keywords (respectively).
-i specifies the location of ntverp.h file.
path represent the fully qualified
location of the directory containing ntverp.h.
-n noisy mode shows verbose stampinf output
-x removes the coinstaller tag from the file and replaces the line w
ith a ";"
NOTES:
The environment variable PRIVATE_DRIVER_PACKAGE can be set to
enable stampinf's 'developer mode' behavior. When this is
set, the date and version used for DriverVer is set to the
current date and time, regardless of the command line
settings. Also, 'CatalogFile=delta.cat' is written to the
version section, unless a catalog was already specified
with '-c'.
c:\Program Files (x86)\Windows Kits\10\build\WindowsDriver.common.targets(355,5
): error MSB6006: "stampinf.exe" exited with code 1. [C:\sw\dev\T4\windows\Src\
kernel\vbd\cht4vbd.vcxproj]
Done Building Project "C:\sw\dev\T4\windows\Src\kernel\vbd\cht4vbd.vcxproj" (de
fault targets) -- FAILED.
Build FAILED.
"C:\sw\dev\T4\windows\Src\kernel\vbd\cht4vbd.vcxproj" (default target) (1) ->
(StampInf target) ->
c:\Program Files (x86)\Windows Kits\10\build\WindowsDriver.common.targets(355
,5): error MSB6006: "stampinf.exe" exited with code 1. [C:\sw\dev\T4\windows\Sr
c\kernel\vbd\cht4vbd.vcxproj]
0 Warning(s)
1 Error(s)
Time Elapsed 00:00:04.07
Thanks, Krishna -
Unable to run a report with chart
I have report rel.6 NT version installed on Windows 2000.Now I want to run my report with a chart.But after I finished the chart
wizard and try to run it,it gives me error.The error says that it is unable to create a PL/SQL Development Environment context.I also try it on Report Runtime
and it gives me error "REP-0074:Failure to run another product using SSL".Anybody out there can help me.Is it because of my operating system or ????Charlie:
I think we might be dealing with a bug: I have the same problem. I'm stumpted as well. Let me know if you make any headway. I think it might be best to call Oracle tech support.
Paul -
When I selected the Itunes store on my win PC today-the program was closed by windows with windows saying there was a problem. I tried a couple of times and then uninstalled the itunes software and reinstalled it with the same results. The program has always worked before but I have not used it recently since the Ipad now receives it's software updates right off the router. I am running Win 7 with IE10. Anyone with the same problem?
My post has been viewed 24 times, and yet have had no answers. I have always like adobe products, however if this is the type of support they offer, I will never purchase another product of theirs. The issue I am having is the same issue many others have had, and yet no answer. Poor customer service!
-
Not able to run the job with user id - is
Hello experts,
We have problem.
Every day we run the job.
( the job contians two programs called ZTIBCOPRG and J_5HJSTP )).
I would like to know why the above job is running with the user ID TIBCOADM. Because this user has German settings for the size conversion in program ZTIBCOPRG and we are having some issues.
We changed the user to TIBCOUSA and the job would not run.
We have changed the user back to TIBCOADM. It is running.
KINDLY HELP ME WITH YOUR VALUABLE inputs. YOUR HELP WILL BE HIGHLY APPRECIATED.
I have checked for both users in AGR_USERS table.
The AGR_USERS is the old user and have many roles compared to userid TIBCOUSA.
WHERE WE NEED TO SEE . IS it authorisation problem or the other user with whom unable to run the job ?
or is this the error in the program ZTIBCOPRG which is not able to do size conversion and causing some issues.
Thanks and Regards,Hi,
after running the job with user id TIBCOUSA, it should be in cancelled state as per your comments.
you just select the cancelled job and type JDBG in command box and enter it takes you to Debug mode.
There you may get some information where it is failing.
Sudheer. A -
Is it possible to screen share an old iMac running 10.4 with a new Mac Mini running Yosemite
Is it possible to screen share an old iMac running 10.4 with a new Mac Mini running Yosemite. I am trying to bring the old iMac screen up on the Yosemite system
Hello! Not out of the box: OS X Mountain Lion: About screen sharing You'll have to look for third-party options like Teamviewer
-
My macbook pro is running very slow with some strange mouse and window movements. The trackpad is very unresponsive and when responding the cursor moves on its own and/or very erratically. When on safari the window suddenly zooms in or highlights words and looks them up via dictionary. I currently have a wireless mouse connected and I am still having the same problems.
I fee like I may have a virus or my laptop is perhaps being accessed remotely. All of the sharing options are unchecked.
HELP PLEASE
Very worried!!Try these in order testing your system after each to see if it's back to normal:
1. a. Resetting your Mac's PRAM and NVRAM
b. Intel-based Macs: Resetting the System Management Controller (SMC)
2. Restart the computer in Safe Mode, then restart again, normally. If this doesn't help, then:
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the
COMMAND and R keys until the Utilities menu screen appears. Alternatively, restart the computer and
after the chime press and hold down the OPTION key until the boot manager screen appears.
Select the Recovery HD and click on the downward pointing arrow button.
3. Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the Utilities menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
Reinstall the 10.9.2 update: OS X Mavericks 10.9.2 Update (Combo).
4. Reinstall Lion/Mountain Lion, Mavericks: Reboot from the Recovery HD. Select Reinstall Lion/Mountain Lion, Mavericks from the Utilities menu, and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
Reinstall the 10.9.2 update: OS X Mavericks 10.9.2 Update (Combo). -
How to configure oracle 6i report server run time component with application server
we got oracle 6i report server for developing the web based reports for our undergoing product. we r succesed in developing the web based reports using oracle 6i report server.But we r facing problems while deploying the product with oracle reports at clients place,why because the client does not have the oracle 6i report server. To solve this problem we have to configure the oracle 6i report server run time component with application server at client side , but we are unable to configure this component(that is CGI handler).
You can run multiple instances of Reports Server in 6i.
In tnsnames.ora, for each server, have a different name and each listening to different port.
For example,
server1.world = (ADDRESS = (PROTOCOL = TCP)(Host = myhost.mydomain.com)(Port = 1949))
server2.world = (ADDRESS = (PROTOCOL = TCP)(Host = myhost.mydomain.com)(Port = 1950))
Also, if you want to know about Reports Server Clustering, you may refer to "Publishing Reports" document on OTN:
http://otn.oracle.com/docs/products/reports/pdf/A73173_01.pdf -
How do I get Outlook to show US and Jewish holidays in iCloud? I am running a PC with Windows7 and explorer.
The only way you can get pictures FROM your iPhone to your computer is if you took the pictures with your iPhone. The only other way you can move photos from the iPhone is to mail them to yourself ( which is very time consuming). If you are trying to get photos from your computer TO your iPhone...in iTunes, click on "Photos" and make sure you check the photos you want to sync.............then sync.If you're still having problems, let me know.
-
can't seem to sync my iphone 4 running ios 7 with itunes 10.6 running on a mac running osx 10.5.8 What can I do to fix this? Is there an itunes update? or How can I return to the previous ios?
To sync an iOS 7 device you need to be running iTunes 11.1.1; iTunes 10.6 is way too old and won't work. You need to install iTunes 11.1.1, but to do that you need to be running at least Mac OS X 10.6.8.
So you need to do the following:
1. Upgrade your Mac to at least OS X 10.6.8 (later preferably, but 10.6.8 at the miniumum).
a. Check first to see if your model Mac can be upgraded, check that it has enough RAM and so forth (2GB at the least, more if possible).
b. If you can't upgrade your Mac, or don't want to, then you will have to buy a new Mac with the latest version of OS X (currently 10.8.5, soon to become 10.9) and iTunes 11.1.1
2. Install iTunes 11.1.1 on your newly upgraded Mac.
3. Sync your iOS 7 iPhone with iTunes. -
I'm running Mac OS 10.5.8. I want to update to 10.7 or later so I can run iTunes 11 with my new iphone 5C. What update should I download?
If you do not know whether your iMac has a PowerPC or Intel processor, do "About this Mac" from your Apple menu. You will get this:
If the line by my second highlight arrow includes the word "PowerPC" as in the image, you can upgrade no higher. If it says, "intel," you can--as Niel indicates--update to at least 10.6.8 and possible higher. -
For unknown reasons iTunes will no longer open. I have an HP laptop running windows 7 with Kaspersky protection. It worked fine before but now won't open. I tried downloading the most recent up-date and it will still not open. Any suggestions?
thrillhousecody
Thanks for the reply with additional information.
Recent history for Premiere Elements points to the program having problems when more than 1 video card/graphics card is
being used by the computer on which Premiere Elements is running. This observation may seem contra indicated by the fact
that you say that the program did work well about 2 years ago in the same setup. But other factors may have set in with regard
to drivers, drivers versions, and driver conflicts. But this factor, does need to be ruled in or out.
Can you disable one or the other card to determine the impact of this on your problem?
But, of prime concern with regard to video card/graphics card is the use of a NVIDIA GeForce card with Premiere Elements 10.
Even if your NVIDIA GeForce were the only card, Premiere Elements 10 will not work properly unless the NVIDIA GeForce driver
version is rolled back to about May 2013. This may be one of the major factors here.
a. Device Manager/Display Adapters and find out Driver Version and Driver Date
b. Read the background information for the Premiere Elements 10/NVIDIA GeForce issue
ATR Premiere Elements Troubleshooting: PE10: NVIDIA Video Card Driver Roll Back
Also see the Announcement at the top of this forum regarding the matter - also with full details of the situation and how to fix with the
driver version roll back.
Please review and consider and then we can decide what next.
Thanks.
ATR
Add On...This NVIDIA GeForce situation is specific for Premiere Elements 10. You should not expect to see the problem for
later versions of Premiere Elements. -
I'm trying to install iCloud on my PC running Windows Vista with Service Pack 2 and I get a message that the set up program is not a valid win32 file. Can anyone help me with this?
What is the exact error message?
Maybe you are looking for
-
I have a number of records contained in a vector. Having trouble writing these records to a file. Even trying to write one record, as below, is throwing an exception. The Student class implements serializable and the method main throws IOException pu
-
Web.xml file not being read
Hello, I did a quick search but could not find an answer to my specific problem. (this is also my first night tackling servlets) i hope this hasnt been answered before. here goes... i'm using Tomcat 4.1 and this is my file structure where i put my se
-
hi, using this function module i want to find the number of pernrs having d-p relationship. then with this FM how can we find pernrs with relation ship D-E-P. how to use P up and down.
-
Is it possible to do ecatt testing for about 3000 users
Hello everyone, My company is upgrading sap and needs ecatt testing to be don. Is it possible to do ecatt testing for about 3000 users.... i mean the requirement is to record the data given by the user and capture it as a log which can be analysed fu
-
I want a solution for this Necesito una solucion para esto sin tener que cambiar todo el sistema OK