SYBASE user rights to modify datatbase content

Hi, I'm new with ZCM11.
My need is to update Serial Number and Asset Tag for computers, which has not written these numbers in BIOS memory.
ZCM Inventory doesn't let to edit them.
I tried to define triggers or modify any NC_WORKSTATION table content with ODBC but "zenadmin" cannot do it.
The error is:
08001(-98)[Sybase][ODBC Driver][SQL Anywhere]Authentication violation
The only user I found is "zenadmin", but this user has no rights to modify database content.
How to set proper rights to the user?
Or there is another user with rights to write/modify?
Or there is another way to modify these serial or asset tag numbers in ZCM?

The OEM Licensing of the Sybase Database is the reason for that error.
The ZCM code contains the licensing details to allow for the connection.
This is why your ODBC calls are not working.
DBISQL can be used to update the tables, but i'm not sure of a remote
way like ODBC without knowing how to get past the license restriction on
Sybase.
On 6/27/2011 1:06 PM, mikrosc wrote:
>
> Hi, I'm new with ZCM11.
>
> My need is to update Serial Number and Asset Tag for computers, which
> has not written these numbers in BIOS memory.
> ZCM Inventory doesn't let to edit them.
>
> I tried to define triggers or modify any NC_WORKSTATION table content
> with ODBC but "zenadmin" cannot do it.
> The error is:
> 08001(-98)[Sybase][ODBC Driver][SQL Anywhere]Authentication violation
> The only user I found is "zenadmin", but this user has no rights to
> modify database content.
>
> How to set proper rights to the user?
> Or there is another user with rights to write/modify?
>
> Or there is another way to modify these serial or asset tag numbers in
> ZCM?
>
>
Craig Wilson - MCNE, MCSE, CCNA
Novell Knowledge Partner
Novell does not officially monitor these forums.
Suggestions/Opinions/Statements made by me are solely my own.
These thoughts may not be shared by either Novell or any rational human.

Similar Messages

How to setup user's rights to modify Windows Firewall Rules?

I would like to have an account in my system that doesn't have any other administrative privileges besides rights to modify the Windows Firewall rules by means of Firewall API. How to setup a minimal set of rights for this account to do the task?
Right now what I see is that if I try to call INetFwRule::put_RemoteAddresses from an account without administrative privileges, the call fails with access denied. There is no means to find out access to what is needed. The call fails even if the process
is run under high integrity level.
I tried to setup global security audit, but there were no relevant events logged.
I tried to monitor the process with procmon, there were no any access denied events logged.
I tried to give the full access for this account to the correspondent registry keys. It didn't help.
I stepped firewallapi.dll in a debugger and found out that what fails is an RPC call to some COM interface proxy. I assumed that probably it is a remote call to some HNetCfg.FwRule method. I tried to add the user account to the HNetCfg.FwRule launch and
access permission ACLs in the DCOM configuration utility. It didn't help either.
Dear Microsoft, why did you do such a simple thing as settings user rights so difficult? Can you reveal the secret what rights and privileges I have to set?
Thanks in advance.
Dei nostra Matrix est.

Here is what I found so far.
The firewall service calls RpcServerRegisterAuthInfo to setup RPC security from FwRpcAPIsRegisterAuthInfo. It happens during registration of RPC interfaces in FwRpcAPIsInterfaceCreate. FwRpcAPIsInterfaceCreate is called from FwRpcAPIsInitialize. And FwRpcAPIsInitialize
is used from FwServiceAsyncStartupRoutine.
After calling FwRpcAPIsRegisterAuthInfo function FwRpcAPIsInterfaceCreate calls ConvertStringSecurityDescriptorToSecurityDescriptor, which converts a textual description of a security descriptor to some binary form.
So my guess is that access rights are hard coded inside mpssvc.dll and what I have to do is just to find the textual representation of the correspondent descriptor.
I found 8 descriptors inside mpssvc.dll:
O:SYG:SYD:(A;;RCWD;;;BA)(A;;RCWD;;;NO)
O:SYG:SYD:(A;;RCWD;;;S-1-5-80-2940520708-3855866260-481812779-327648279-1710889582)(A;;RCWD;;;S-1-5-80-3526382388-830156861-4107432654-3665941875-1028450966)
O:SYG:SYD:(A;;RCWD;;;S-1-5-80-62724632-2456781206-3863850748-1496050881-1042387526)
O:SYG:SYD:(A;;RCWD;;;S-1-5-80-979556362-403687129-3954533659-2335141334-1547273080)
O:SYG:SYD:(A;;RC;;;BA)(A;;RC;;;NO)(A;;RCWD;;;CY)
O:SYG:SYD:(A;;RCWD;;;BA)(A;;RCWD;;;NO)(A;;RC;;;CY)
O:SYG:SYD:(A;;RCWD;;;BA)(A;;RCWD;;;NO)(A;;RC;;;AU)
O:SYG:SYD:(A;;RC;;;AU)
I don't know yet which one corresponds to changing a firewall rule.
Dei nostra Matrix est.

How can I grant users to access/modify system folders (C:/Windows/Fonts) by using GPO in Win7 ?

In our company there are some folks that require often new fonts that they take from the internet. Unfortunately, some of them have offices on in a diferrent country, so going there to insert my admin paswoord is not a solution.
If you copy the ttf file into the C:/Windows/Font folder is enough, you don't have to also add the registry.
One way to bypass the window that asks for admin credentials is to insert my crdentials into the bat file (runas). But this is very unsecure, as I am an administrator.
Is there a way to create a shared folder that can also store fonts that can be used by windows? Can I give them the right to modify files in this folder without making them administrators? Or do you see any solution to this issue? Any help would
be greatly appreciated.
Thank you in advance.

Another solution which will not compromise your security is to create a share folder and have the users to download fonts to the folder. After that a simple schedule task GPO on clients to copy the
*.ttf files from the folder to the C:\Windows\Fonts folder. Since tha task can be run by administrative privileges I guess there will be no problem.
Regards.
Mahdi Tehrani Loves Powershell
Please kindly click on Propose As Answer
or to mark this post as
and helpful to other people.

Extended user rights and 500 users limits on a PDF Form

Hello,
I read that there's 500 users limits for using extended user rights on Acrobat Pro 9.
Here's my situation:
- I built an application PDF form with extended user rights for Adobe Reader users to save the form. And I'm going to be hosting it on the web for users to download the PDF form to their local hard drive.
- The form will have a button to submit to a web page with a script for processing FDF, XFDF, XML, or HTP form export.
My question is:
1. Would it be violating the 500 users limits if more than 500 users download the form and save the PDF after filling out fields, but not submit the data back to the server?
2. What would happen if more than 500 responses are received through above method? Would new visitors still be able to save the PDF form for their archive purpose after downloading it from our web site?
Thanks.

Can Adobe's licensing department define "extract"? I know there is a lot of confusion here and I'm trying to understand.
Here is our scenario: We have developed an Adobe fillable form which we will be sending to 1000 customers. Customers can open the form (in Reader v9.5 and greater) and fill out the form, validate it and then print it. The customers are not sending the PDF files back to us and the PDF data is not being collected so there is no data we can extract from Adobe files (we are not that advanced yet). Customers will just print the information, then fax or send back to us by U.S. Mail.
When we receive the completed information (via fax/mail, not PDF), we read information off our form. Does Adobe consider reading our information “extracting” with our eyes? I’m not sure how they can consider that extracting? I would think Adobe owns the mechanism (aka PDF file) for validating our content, but they wouldn’t own the content on our form if we want to physically read it, right?
Adobe needs to clarify this more clearly and I’ve ready their interpretation of the Policy, but it doesn’t address this scenario. http://www.adobe.com/products/eulas/pdfs/Reader_Extension_Policy_A10-5-31-2011.pdf
George, I don't think you are an Adobe Employee. I see you are a MVP, but you are not officiall speaking for Adobe are you?
---Thanks.

Archive directory user rights?

Hi all: I recently migrated our GW2014 SP1 server over to new hardware. The migration went smooth and our domain and postoffice seem happy. My users are reporting an 8201 error when starting up their client and I have traced it to a user rights issue with our archive folder on the server. I have given full rights to everyone as a temp measure, but I want to get the proper rights set up. BTW, the archive directory is on an NSS volume.
So, what are the proper user rights to the archive directory? Thanks much, Chris.

Hi Chris,
They need Read, Write, File Scan, Create, Erase, Modify, Delete - all except Access Control and Supervisor.
Hope that helps.
Cheers,

Enable User Rights in Adobe: how to always have that on?

I finally figured out why most PC users were not able to save any of the fields they filled out in my PDFs: I didn't know about the user rights feature.
Is there a way to always "Enable User Rights in Reader" to be turned on, so I don't have to remember to go the Advanced menu and select "Enable User Rights In Acrobat Reader" ?
Many thanks!

> It took years, and years, and years of beging and pleading. And Adobe finally threw us a Bone.
Yes. And then poisioned it with this ridiculous and undecipherable license limitation.
> ...you would presumably know which users sent you a PDF that you enabled with Acrobat.
The mumbo-jumbo seems to assume the use of saveable forms is always for data collection, sent back to the form's creator. That is the use of
least interest to me.
For me, it's all about creating a design-intensive document
once (a placement ad or a marketing flyer or a spec sheet), adding a few simple boiler-plate fields to it for contact information, and sending it to my client, who then sends it to his dealers. Each dealer can then edit the contact info, save it, have it printed or placed in a newspaper, use it for trade show hand-outs.
How is the creator of such a document supposed to police the 500 "uses" limit? Who is liable when that limit is exceeded? What constitutes a single "use"? (I only used the file once. The client only used the file once. Each Dealer will
edit the form content once, but may have it printed in 501 local newspapers.)
The terms are unintelligible and probably unenforceable. This confusion has existed ever since Adobe finally threw the bone. The stupid paranoia poison just needs to be removed.
JET

IRM / web services / check user rights to the document by login

Hellow,
How to check if user can read sealed document?
Sealing Server can be used to get Classification (Peeking http://download.oracle.com/docs/cd/E21764_01/user.1111/e12326/isvsealedcontent001.htm#DAFHIHIH)
"The classification is used by the Oracle IRM Desktop to determine whether the *authenticated user* can access the sealed content".
How can I do the same if i know the login user name?

Thanks!
My example
// get document context id
var sealedDoc = File.ReadAllBytes(_SealedFileName);
string contextId;
using (var srv = new SealingServicesClient())
srv.ClientCredentials.UserName.UserName = _ContextAdminName;
srv.ClientCredentials.UserName.Password = _ContextAdminPass;
var data = srv.Peek(sealedDoc);
contextId = data.classification.id;
// get user rights
string userName = "BillGates";
AccountRef account = new AccountRef();
account.uuid = string.Format("urn:user:{0}", userName);
DocumentRight[] rights;
using (var srv = new DocumentRightOperationsClient())
srv.ClientCredentials.UserName.UserName = _ContextAdminName;
srv.ClientCredentials.UserName.Password = _ContextAdminPass;
rights = srv.ListRightsByAccount(account);
// check if user can read
bool canRead;
var right = rights.FirstOrDefault(rr => rr.context.uuid == contextId);
if (right == null)
return;
canRead = (right.role.features.FirstOrDefault(ff => ff.id == "oracle.irm.generic.Open") != null);

Missing user rights assignment entries for many security policies in list exported via secedit

Hello,
First of all, I posted this same question on The Official Scripting Guys Forum! but didn't get the answer to this exact question (even though I received a lot of useful relevant info). That is why I am posting here. This is a more appropriate
forum for the question. (Also posted on Windows Server 2012 General two days ago and didn't get a response at all).
OK, question time:
I want to modify the user rights assignment for a local security policy. In the GUI, find User Rights Assignment as follows: Win+R -> Enter "secpol.msc" -> Go to Local Policies -> Go to User Rights Assignment.
So, to modify a particular use rights assignment via a script, I need to export the INF file using secedit, modify it and then configure using the modified file using secedit. To export the INF file, I am using:
secedit /export /db C:\Windows\security\database\secedit.sdb /mergedpolicy /cfg SecPolicy
Now, the problem is that the INF file exported doesn't have all the user rights assignments that I see in the GUI. For example, the policy "Restore files and directories" has users/groups in its settings but it doesn't show up in the INF file.
In fact, most don't. Only five do and all these five have a different symbol next to them in the GUI. How are these policies different? What do I need to do to export all the policies?
EDIT: Adding screenshot of what I see:
Thanks!
-Rohan.

On Fri, 11 Apr 2014 18:26:50 +0000, Rohan PN wrote:
Now, the problem is that the INF file exported doesn't have all the user rights assignments that I see in the GUI. For example, the policy "Restore files and directories" has users/groups in its settings but it doesn't show up in the INF
file. In fact, most don't. Only five do and all these five have a different symbol next to them in the GUI. How are these policies different? What do I need to do to export all the policies?
Can you post a screen shot? My guess is that what you're seeing is that
secpol is only exporting the local settings and not ones that are set by a
GPO in AD and that will also be the difference between the icons.
Paul Adare - FIM CM MVP
Although the Buddhists will tell you that desire is the root of suffering,
my personal experience leads me to point the finger at system
administration.
-- Philip Greenspun

Modify contributor content using validation script

Hi all,
I'd like to modify contributors content in a particular wysiwyg element using the external validation script. I've added a simple function to the default validation script included with SS 10gR4. Right now the part I don't get is - how to return the modified content back to the page?
Here's what I've got so far as a simple test, but it doesn't replace the original content.
function fnModiifyWysiwyg(oContent)
     var strTextContent = fnSSGetTextContent(oContent);
     strTextContent = "<b>this is a test</b>";
     oContent = strTextContent;
     return oContent;
}

I am trying to get at the HTML of contributed content to make sure it does not exceed 255 chars. I can't seem to figure out how to validate anything but the text part of the contributed content.
function fnSSGetTextContent(oContent)
     var strContent = '';
     if (typeof oContent == 'string')
          strContent = oContent;
     else if (typeof oContent.innerText == 'string')
          strContent = oContent.innerText;
     else if (typeof oContent.textContent == 'string')
          strContent = oContent.textContent;
     return strContent;
function testval(oContent) {
     var strTextContent = fnSSGetTextContent(oContent);
     if (strTextContent.length > 255) {
          alert("test");
     else {
          return true;
If I have content that, in design view, looks like
test
and in source mode looks like
test
The validation does not trigger (it should). If I put more than 255 chars in design mode, the validate fires and I get my alert.

When using the camera downloader in Adobe Bridge CS6 with Nikon D5200 we are unable to see previews of the photos and it is very slow to download. The issue occurs under a the users rights, but not under admin level. This is a new issue

When using the camera downloader in Adobe Bridge CS6 with Nikon D5200 we are unable to see previews of the photos and it is very slow to download. The issue occurs under a the users rights, but not under admin level. This is a new issue.

Hi Jdentremont,
Lync client gets user photos by first querying the Address Book Web Query (ABWQ) service on the server, which is exposed through the Distribution List Expansion web service. The client receives
the image file and then copies it to the user's cache to avoid downloading the image each time it needs to be displayed. The attribute values returned from the query are also stored in the cached Address Book Service entry for the user. The Address Book Service
deletes all cached images every 24 hours, which means that it can take up to 24 hours for new user images to be updated in the cache on the server.
To troubleshoot your problem, please follow the steps below:
1. Navigate to
“X:\share\1-WebServices-1\ABfiles\000000000\000000000” folder. (ABS file share)
You should see some photo files in this folder as the following screenshot.
2. Delete all the files in this folder.
3. On test PC, delete local cache files.
%userprofile%\AppData\Local\Microsoft\Office\15.0\Lync\[email protected]
4. Sign-in Lync with the test account.
5. Go back to the ABS file share, check if there is any Photo file in the folder.
Best regards,
Eric
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

How to set up time machine so it can view old backup after renewal of user rights ?

I am newbie in the mac world but I am very happy to use the devices I have.
I just both and setup time capsule and did firt initial backup with time machine into account I have setup on the TC. But after while I was not able to view my user folder, so I resetup the user rights.
But now when I turn on time machine, I say that I didnt perform initial backup. In finder I am able to see and acces my folder on TC now and there is also a file with backup with name Václav - Mac mini.sparsebundle just in the root of my user folder on TC.
Can you please help me how to tell TM, that there is a initial backup that can be used for other incremental backups in the future ?
Thanks for your help.
Vaclav.

I did that. But and then reopen TM but still I dont see backup performed any suggestions ?
"Inherit" a backup
Copy the following after the prompt, and leave a space, but do not press Return yet:
sudo tmutil inheritbackup
If your backups are on an external HD, locate and open the drive in the Finder window. At the top level of the drive is a Backups.backupdb folder containing a folder named for your old Mac, per the sample. This is what you want the new Mac to "inherit." Drag that folder to the Terminal window.
(If your backups are on a Time Capsule, locate the sparse bundle containing the backups for your old Mac via the Finder, and drag it to the Terminal window):

Group Policy - User Rights Assignments not taking effect on workstation`

Novell 5.1 SP7. ZenWorks 3.2 sp3. Windows XP Pro workstations.
In Group Policy, (Computer Configuration/Windows Settings/Security
Settings/Local Policies/User Rights Assignment), I have added Power Users to
the "Load and Unload device drivers" policy. However this setting is not
taking effect on my Windows XP workstations. My DLU policy for users is
configured to have the users members of the "Users" and "Power Users" groups
on the local PC.
Other parts of Group Policy (Computer Policy/Administrative Templates) are
taking effect on the workstation, so I'm wondering if the problem I am
having is related to Security Settings only.
I enabled Group Policy logging on the Windows XP workstation and include it
below:
WMHelperInitialization (Mar 4 2004) called! Flags: 0x8001002. Event:
0x1000. Impersonation: 0x2
Created Mutex.
Loaded userenv.dll
Mapped function RefreshPolicy
Mapped function RegisterGPNotification
Mapped function UnregisterGPNotification
Mapped function RefreshPolicyEx
Exiting WMHelperInitialization. Returning flags: 0x204
WMHelperSystemEntryEx called!
Entered GPCleanupEntry
Writing User Logged In to \HKLM\Software\Novell\Workstation Manager\Group
Policies
Wrote reg. value 0x0 to User Logged In in key Software\Novell\Workstation
Manager\Group Policies
Reading Group Policy User Flags from \HKLM\Software\Novell\Workstation
Manager\Group Policies
Read reg. value Group Policy User Flags: 0x80000070 in key
Software\Novell\Workstation Manager\Group Policies
Reading Persist Workstation settings from \HKLM\Software\Novell\Workstation
Manager\Group Policies
Reg key Software\Novell\Workstation Manager\Group Policies\Persist
Workstation settings not found. Assuming 0
Error 2 reading Persist Workstation settings
Entered RestoreOriginalGP.
Reading Group Policy Machine Flags from \HKLM\Software\Novell\Workstation
Manager\Group Policies
Reg key Software\Novell\Workstation Manager\Group Policies\Group Policy
Machine Flags not found. Assuming 0
Reading Group Policy User Flags from \HKLM\Software\Novell\Workstation
Manager\Group Policies
Read reg. value Group Policy User Flags: 0x80000070 in key
Software\Novell\Workstation Manager\Group Policies
Entered GPDel
Deleting C:\WINDOWS\System32\GroupPolicy\User
Deleting C:\WINDOWS\System32\GroupPolicy\Machine
Exiting GPDel 0
Restoring backup GP from C:\WINDOWS\System32\GroupPolicy.WMOriginal
Entered GPCopy(C:\WINDOWS\System32\GroupPolicy.WMOriginal,
C:\WINDOWS\System32\GroupPolicy, 0, handle, 0x80000070)
Warning: C:\WINDOWS\System32\GroupPolicy.WMOriginal\GPT.ini does not exist
Copied file
C:\WINDOWS\System32\GroupPolicy.WMOriginal\Machine \Microsoft\Windows
NT\SecEdit\IPS1.dat to
C:\WINDOWS\System32\GroupPolicy\Machine\Microsoft\ Windows
NT\SecEdit\IPS1.dat
Copied file
C:\WINDOWS\System32\GroupPolicy.WMOriginal\Machine \Microsoft\Windows
NT\SecEdit\XPSec.dat to
C:\WINDOWS\System32\GroupPolicy\Machine\Microsoft\ Windows
NT\SecEdit\XPSec.dat
GP_FLAG_APPLY_SECURITY_SETTINGS (0x40), not set, or security file already
copied. Will not copy security file
Exiting GPCopy 0x0
Writing Group Policy Machine Status to \HKLM\Software\Novell\Workstation
Manager\Group Policies
Wrote reg. value 0x4000 to Group Policy Machine Status in key
Software\Novell\Workstation Manager\Group Policies
Exiting RestoreOriginalGP 0x0
Entered AppendSecuritySettings
Inf path: C:\WINDOWS\System32\GroupPolicy\Machine\Microsoft\ Windows
NT\SecEdit\XPSec.dat
Restoring GP settings
Loading Account Policies...
Loading Audit Policies...
Loading user rights...
Restoring security options...
No data
No data
No data
No data
No data
No data
No data
No data
Renamed Administrator account: Administrator
Local Administrator's user name = Administrator
Administrator account names match, skipping.
Renamed Guest account: Guest
Local Guest's user name = Guest
Guest account names match, skipping.
LoadXPSecuritySettings returning 0
LoadHive entered
LoadHive exit : 0
Exiting AppendSecuritySettings 0x0
GPCleanupEntry releasing mutex.
Exiting GPCleanupEntry: 0
Exiting WMHelperSystemEntryEx ccode: 0x0
Closing log file.
WMHelperInitialization (Mar 4 2004) called! Flags: 0x0. Event: 0x0.
Impersonation: 0x0
Created Mutex.
Loaded userenv.dll
Mapped function RefreshPolicy
Mapped function RegisterGPNotification
Mapped function UnregisterGPNotification
Mapped function RefreshPolicyEx
Exiting WMHelperInitialization. Returning flags: 0x11
Entering WMHelperInteractiveUserEntry!
szFullDN = CN=wintest3.OU=Users.OU=Newcastle.O=OSG
DN is Typed convert it to TYPELESS
g_szUserDN = wintest3.Users.Newcastle.OSG
GinaGetUsersSIDInTextualForm ENTERED
Textual SID : S-1-5-21-1214440339-507921405-1708537768-1019
GinaGetUsersSIDInTextualForm EXIT : 0
Writing Don't reparse to \HKLM\Software\Novell\Workstation Manager\Group
Policies
Wrote reg. value 0x0 to Don't reparse in key Software\Novell\Workstation
Manager\Group Policies
Writing User Logged In to \HKLM\Software\Novell\Workstation Manager\Group
Policies
Wrote reg. value 0x1 to User Logged In in key Software\Novell\Workstation
Manager\Group Policies
Entered CheckForObsoleteWksCache .
No workstation. Exiting CheckForObsoleteWksCache
Applying user policies
Reading Don't reparse from \HKLM\Software\Novell\Workstation Manager\Group
Policies
Read reg. value Don't reparse: 0x0 in key Software\Novell\Workstation
Manager\Group Policies
Reading Group Policy User Status from \HKLM\Software\Novell\Workstation
Manager\Group Policies
Read reg. value Group Policy User Status: 0x3000 in key
Software\Novell\Workstation Manager\Group Policies
Read reg. key Group Policy User Status: 0x3000
Entering ApplyPolicies
Reading Group Policy User Flags from \HKLM\Software\Novell\Workstation
Manager\Group Policies
Read reg. value Group Policy User Flags: 0x80000070 in key
Software\Novell\Workstation Manager\Group Policies
Read reg. key Group Policy User Flags: 0x80000070
Reading Group Policy User Status from \HKLM\Software\Novell\Workstation
Manager\Group Policies
Read reg. value Group Policy User Status: 0x3000 in key
Software\Novell\Workstation Manager\Group Policies
Read reg. key Group Policy User Status: 0x3000
Writing Group Policy User Status to \HKLM\Software\Novell\Workstation
Manager\Group Policies
Wrote reg. value 0x1000 to Group Policy User Status in key
Software\Novell\Workstation Manager\Group Policies
Impersonating logged on user.
Context : OU=Users.OU=Newcastle.O=OSG
Full Object DN CN=wintest3.OU=Users.OU=Newcastle.O=OSG
Calling WMGetAllAssociatedObjects(FALSE, MARITIME, 1,
CN=wintest3.OU=Users.OU=Newcastle.O=OSG, WINNT Workstation Package,
zenwmGroupPolicy, 512, pBuffer)
Reverting to system impersonation.
Found DN CN=XP User Package:WinNT-2000-XP:Windows Group Policy.OU=Policy
Packages.OU=Newcastle.O=OSG
WMCheckIfGroupPolicyObjectsChanged entered
Impersonating logged on user.
Reverting to system impersonation.
Group Policy object has NOT changed!
Exiting WMCheckIfGroupPolicyObjectsChanged 0x0
Entered ScheduleCleanup.
Loaded wmschapi.dll
Calling WMScheduleAction
Finished Calling WMScheduleAction. Returned 0x0
Exiting ScheduleCleanup 0x0
Entered BackupOriginalGP.
No backup exists. Creating one: C:\WINDOWS\System32\GroupPolicy.WMOriginal
Backing up original GP to C:\WINDOWS\System32\GroupPolicy.WMOriginal
Copied file C:\WINDOWS\System32\GroupPolicy\Adm\admfiles.ini to
C:\WINDOWS\System32\GroupPolicy.WMOriginal\Adm\adm files.ini
Copied file C:\WINDOWS\System32\GroupPolicy\Adm\conf.adm to
C:\WINDOWS\System32\GroupPolicy.WMOriginal\Adm\con f.adm
Copied file C:\WINDOWS\System32\GroupPolicy\Adm\inetres.adm to
C:\WINDOWS\System32\GroupPolicy.WMOriginal\Adm\ine tres.adm
Copied file C:\WINDOWS\System32\GroupPolicy\Adm\system.adm to
C:\WINDOWS\System32\GroupPolicy.WMOriginal\Adm\sys tem.adm
Copied file C:\WINDOWS\System32\GroupPolicy\Adm\wmplayer.adm to
C:\WINDOWS\System32\GroupPolicy.WMOriginal\Adm\wmp layer.adm
Copied file C:\WINDOWS\System32\GroupPolicy\Adm\wuau.adm to
C:\WINDOWS\System32\GroupPolicy.WMOriginal\Adm\wua u.adm
Copied file C:\WINDOWS\System32\GroupPolicy\GPT.ini to
C:\WINDOWS\System32\GroupPolicy.WMOriginal\GPT.ini
Copied file C:\WINDOWS\System32\GroupPolicy\Machine\Microsoft\ Windows
NT\SecEdit\IPS1.dat to
C:\WINDOWS\System32\GroupPolicy.WMOriginal\Machine \Microsoft\Windows
NT\SecEdit\IPS1.dat
Copied file C:\WINDOWS\System32\GroupPolicy\Machine\Microsoft\ Windows
NT\SecEdit\XPSec.dat to
C:\WINDOWS\System32\GroupPolicy.WMOriginal\Machine \Microsoft\Windows
NT\SecEdit\XPSec.dat
Entered SaveSecuritySettings
Inf path:
C:\WINDOWS\System32\GroupPolicy.WMOriginal\Machine \Microsoft\Windows
NT\SecEdit\
Saving XP security settings
Saving Account Policies...
Saving Audit Policies...
Saving user rights...
Name: Administrator
Comment: Built-in account for administering the computer/domain
Full Name:
No rights.
Name: Guest
Comment: Built-in account for guest access to the computer/domain
Full Name:
Right: SeInteractiveLogonRight
Right: SeDenyInteractiveLogonRight
Right: SeDenyNetworkLogonRight
Name: HelpAssistant
Comment: Account for Providing Remote Assistance
Full Name: Remote Desktop Help Assistant Account
No rights.
Name: SUPPORT_388945a0
Comment: This is a vendor's account for the Help and Support Service
Full Name: CN=Microsoft Corporation,L=Redmond,S=Washington,C=US
Right: SeBatchLogonRight
Right: SeDenyInteractiveLogonRight
Right: SeDenyNetworkLogonRight
Name: vector
Comment: Account created by Novell's Workstation Manager
Full Name:
No rights.
Name: wintest3
Comment: Account created by Novell's Workstation Manager
Full Name:
No rights.
Name: None
Comment: Ordinary users
No rights.
Name: Administrators
Right: SeSecurityPrivilege
Right: SeBackupPrivilege
Right: SeRestorePrivilege
Right: SeSystemtimePrivilege
Right: SeShutdownPrivilege
Right: SeRemoteShutdownPrivilege
Right: SeTakeOwnershipPrivilege
Right: SeDebugPrivilege
Right: SeSystemEnvironmentPrivilege
Right: SeSystemProfilePrivilege
Right: SeProfileSingleProcessPrivilege
Right: SeIncreaseBasePriorityPrivilege
Right: SeLoadDriverPrivilege
Right: SeCreatePagefilePrivilege
Right: SeIncreaseQuotaPrivilege
Right: SeChangeNotifyPrivilege
Right: SeUndockPrivilege
Right: SeManageVolumePrivilege
Right: SeImpersonatePrivilege
Right: SeCreateGlobalPrivilege
Right: SeInteractiveLogonRight
Right: SeNetworkLogonRight
Right: SeRemoteInteractiveLogonRight
Name: Users
Right: SeShutdownPrivilege
Right: SeChangeNotifyPrivilege
Right: SeUndockPrivilege
Right: SeInteractiveLogonRight
Right: SeNetworkLogonRight
Name: Guests
No rights.
Name: Power Users
Right: SeSystemtimePrivilege
Right: SeShutdownPrivilege
Right: SeProfileSingleProcessPrivilege
Right: SeChangeNotifyPrivilege
Right: SeUndockPrivilege
Right: SeInteractiveLogonRight
Right: SeNetworkLogonRight
Name: Account operators
No rights.
Name: System operators
No rights.
Name: Printer operators
No rights.
Name: Backup operators
Right: SeBackupPrivilege
Right: SeRestorePrivilege
Right: SeShutdownPrivilege
Right: SeChangeNotifyPrivilege
Right: SeInteractiveLogonRight
Right: SeNetworkLogonRight
Name: Replicators
No rights.
Name: RAS servers
No rights.
Name: Pre2000 compatible access
No rights.
Exiting SaveUserRights (0)
Saving Security Options
Found: MACHINE/Software/Microsoft/Driver Signing/Policy
Data type is 3
Found: MACHINE/Software/Microsoft/Windows
NT/CurrentVersion/Setup/RecoveryConsole/SecurityLevel
Data type is 4
Found: MACHINE/Software/Microsoft/Windows
NT/CurrentVersion/Setup/RecoveryConsole/SetCommand
Data type is 4
Found: MACHINE/Software/Microsoft/Windows
NT/CurrentVersion/Winlogon/AllocateCDRoms
Data type is 1
Found: MACHINE/Software/Microsoft/Windows
NT/CurrentVersion/Winlogon/AllocateDASD
Data type is 1
Found: MACHINE/Software/Microsoft/Windows
NT/CurrentVersion/Winlogon/AllocateFloppies
Data type is 1
Found: MACHINE/Software/Microsoft/Windows
NT/CurrentVersion/Winlogon/CachedLogonsCount
Data type is 1
Found: MACHINE/Software/Microsoft/Windows
NT/CurrentVersion/Winlogon/ForceUnlockLogon
Data type is 4
Found: MACHINE/Software/Microsoft/Windows
NT/CurrentVersion/Winlogon/PasswordExpiryWarning
Data type is 4
Found: MACHINE/Software/Microsoft/Windows
NT/CurrentVersion/Winlogon/ScRemoveOption
Data type is 1
Found:
MACHINE/Software/Microsoft/Windows/CurrentVersion/Policies/System/DisableCAD
Data type is 4
Found:
MACHINE/Software/Microsoft/Windows/CurrentVersion/Policies/System/DontDisplayLastUserName
Data type is 4
Found:
MACHINE/Software/Microsoft/Windows/CurrentVersion/Policies/System/LegalNoticeCaption
Data type is 1
Found:
MACHINE/Software/Microsoft/Windows/CurrentVersion/Policies/System/LegalNoticeText
Data type is 7
Found:
MACHINE/Software/Microsoft/Windows/CurrentVersion/Policies/System/ScForceOption
Data type is 4
Found:
MACHINE/Software/Microsoft/Windows/CurrentVersion/Policies/System/ShutdownWithoutLogon
Data type is 4
Found:
MACHINE/Software/Microsoft/Windows/CurrentVersion/Policies/System/UndockWithoutLogon
Data type is 4
Found: MACHINE/SOFTWARE/policies/Microsoft/windows
NT/DCOM/MachineAccessRestriction
Data type is 1
Found: MACHINE/SOFTWARE/policies/Microsoft/windows
NT/DCOM/MachineLaunchRestriction
Data type is 1
Found: MACHINE/System/CurrentControlSet/Control/Lsa/AuditBaseObjects
Data type is 4
Found: MACHINE/System/CurrentControlSet/Control/Lsa/CrashOnAuditFail
Data type is 4
Found: MACHINE/System/CurrentControlSet/Control/Lsa/DisableDomainCreds
Data type is 4
Found:
MACHINE/System/CurrentControlSet/Control/Lsa/EveryoneIncludesAnonymous
Data type is 4
Found: MACHINE/System/CurrentControlSet/Control/Lsa/FIPSAlgorithmPolicy
Data type is 4
Found: MACHINE/System/CurrentControlSet/Control/Lsa/ForceGuest
Data type is 4
Found: MACHINE/System/CurrentControlSet/Control/Lsa/FullPrivilegeAuditing
Data type is 3
Found: MACHINE/System/CurrentControlSet/Control/Lsa/LimitBlankPasswordUse
Data type is 4
Found: MACHINE/System/CurrentControlSet/Control/Lsa/LmCompatibilityLevel
Data type is 4
Found: MACHINE/System/CurrentControlSet/Control/Lsa/MSV1_0/NTLMMinClientSec
Data type is 4
Found: MACHINE/System/CurrentControlSet/Control/Lsa/MSV1_0/NTLMMinServerSec
Data type is 4
Found: MACHINE/System/CurrentControlSet/Control/Lsa/NoDefaultAdminOwner
Data type is 4
Found: MACHINE/System/CurrentControlSet/Control/Lsa/NoLMHash
Data type is 4
Found: MACHINE/System/CurrentControlSet/Control/Lsa/RestrictAnonymous
Data type is 4
Found: MACHINE/System/CurrentControlSet/Control/Lsa/RestrictAnonymousSAM
Data type is 4
Found: MACHINE/System/CurrentControlSet/Control/Lsa/SubmitControl
Data type is 4
Found: MACHINE/System/CurrentControlSet/Control/Print/Providers/LanMan Print
Services/Servers/AddPrinterDrivers
Data type is 4
Found:
MACHINE/System/CurrentControlSet/Control/SecurePipeServers/Winreg/AllowedPaths/Machine
Data type is 7
Found: MACHINE/System/CurrentControlSet/Control/Session
Manager/Kernel/ObCaseInsensitive
Data type is 4
Found: MACHINE/System/CurrentControlSet/Control/Session Manager/Memory
Management/ClearPageFileAtShutdown
Data type is 4
Found: MACHINE/System/CurrentControlSet/Control/Session
Manager/ProtectionMode
Data type is 4
Found:
MACHINE/System/CurrentControlSet/Services/LanManServer/Parameters/AutoDisconnect
Data type is 4
Found:
MACHINE/System/CurrentControlSet/Services/LanManServer/Parameters/EnableForcedLogOff
Data type is 4
Found:
MACHINE/System/CurrentControlSet/Services/LanManServer/Parameters/EnableSecuritySignature
Data type is 4
Found:
MACHINE/System/CurrentControlSet/Services/LanManServer/Parameters/NullSessionPipes
Data type is 7
Found:
MACHINE/System/CurrentControlSet/Services/LanManServer/Parameters/NullSessionShares
Data type is 7
Found:
MACHINE/System/CurrentControlSet/Services/LanManServer/Parameters/RequireSecuritySignature
Data type is 4
Found:
MACHINE/System/CurrentControlSet/Services/LanmanWorkstation/Parameters/EnablePlainTextPassword
Data type is 4
Found:
MACHINE/System/CurrentControlSet/Services/LanmanWorkstation/Parameters/EnableSecuritySignature
Data type is 4
Found:
MACHINE/System/CurrentControlSet/Services/LanmanWorkstation/Parameters/RequireSecuritySignature
Data type is 4
Found: MACHINE/System/CurrentControlSet/Services/LDAP/LDAPClientIntegrity
Data type is 4
Found:
MACHINE/System/CurrentControlSet/Services/Netlogon/Parameters/DisablePasswordChange
Data type is 4
Found:
MACHINE/System/CurrentControlSet/Services/Netlogon/Parameters/MaximumPasswordAge
Data type is 4
Found:
MACHINE/System/CurrentControlSet/Services/Netlogon/Parameters/RefusePasswordChange
Data type is 4
Found:
MACHINE/System/CurrentControlSet/Services/Netlogon/Parameters/RequireSignOrSeal
Data type is 4
Found:
MACHINE/System/CurrentControlSet/Services/Netlogon/Parameters/RequireStrongKey
Data type is 4
Found:
MACHINE/System/CurrentControlSet/Services/Netlogon/Parameters/SealSecureChannel
Data type is 4
Found:
MACHINE/System/CurrentControlSet/Services/Netlogon/Parameters/SignSecureChannel
Data type is 4
Found:
MACHINE/System/CurrentControlSet/Services/NTDS/Parameters/LDAPServerIntegrity
Data type is 4
Administrator's user name = Administrator
Guest's user name = Guest
SaveHive entered
SaveHive exit : 0
Exiting SaveSecuritySettings 0x0
Backup path: C:\WINDOWS\System32\GroupPolicy.WMOriginal
Exiting BackupOriginalGP 0x0
Entered RestoreCachedGP.
Reading Group Policy User Flags from \HKLM\Software\Novell\Workstation
Manager\Group Policies
Read reg. value Group Policy User Flags: 0x80000070 in key
Software\Novell\Workstation Manager\Group Policies
Reading Group Policy Machine Flags from \HKLM\Software\Novell\Workstation
Manager\Group Policies
Reg key Software\Novell\Workstation Manager\Group Policies\Group Policy
Machine Flags not found. Assuming 0
No gpt.ini detected, aborting RestoreCachedGP.
Checking whether OriginalGP exists
Entered GPDel
Deleting C:\WINDOWS\System32\GroupPolicy\User
Deleting C:\WINDOWS\System32\GroupPolicy\Machine
Exiting GPDel 0
Restoring original GP.
Entered RestoreOriginalGP.
Reading Group Policy Machine Flags from \HKLM\Software\Novell\Workstation
Manager\Group Policies
Reg key Software\Novell\Workstation Manager\Group Policies\Group Policy
Machine Flags not found. Assuming 0
Reading Group Policy User Flags from \HKLM\Software\Novell\Workstation
Manager\Group Policies
Read reg. value Group Policy User Flags: 0x80000070 in key
Software\Novell\Workstation Manager\Group Policies
Entered GPDel
Deleting C:\WINDOWS\System32\GroupPolicy\User
Deleting C:\WINDOWS\System32\GroupPolicy\Machine
Exiting GPDel 0
Restoring backup GP from C:\WINDOWS\System32\GroupPolicy.WMOriginal
Entered GPCopy(C:\WINDOWS\System32\GroupPolicy.WMOriginal,
C:\WINDOWS\System32\GroupPolicy, 0, handle, 0x80000070)
Copied C:\WINDOWS\System32\GroupPolicy.WMOriginal\GPT.ini to
C:\WINDOWS\System32\GroupPolicy\GPT.ini
Copied file
C:\WINDOWS\System32\GroupPolicy.WMOriginal\Machine \Microsoft\Windows
NT\SecEdit\IPS1.dat to
C:\WINDOWS\System32\GroupPolicy\Machine\Microsoft\ Windows
NT\SecEdit\IPS1.dat
Copied file
C:\WINDOWS\System32\GroupPolicy.WMOriginal\Machine \Microsoft\Windows
NT\SecEdit\XPSec.dat to
C:\WINDOWS\System32\GroupPolicy\Machine\Microsoft\ Windows
NT\SecEdit\XPSec.dat
GP_FLAG_APPLY_SECURITY_SETTINGS (0x40), not set, or security file already
copied. Will not copy security file
Exiting GPCopy 0x0
Writing Group Policy User Status to \HKLM\Software\Novell\Workstation
Manager\Group Policies
Wrote reg. value 0x4000 to Group Policy User Status in key
Software\Novell\Workstation Manager\Group Policies
Exiting RestoreOriginalGP 0x0
Writing Group Policy User Status to \HKLM\Software\Novell\Workstation
Manager\Group Policies
Wrote reg. value 0x4000 to Group Policy User Status in key
Software\Novell\Workstation Manager\Group Policies
Entered GPCopy(C:\WINDOWS\System32\GroupPolicy.UserCache,
C:\WINDOWS\System32\GroupPolicy, 0, handle, 0x80000070)
Copied C:\WINDOWS\System32\GroupPolicy.UserCache\GPT.ini to
C:\WINDOWS\System32\GroupPolicy\GPT.ini
Copied file
C:\WINDOWS\System32\GroupPolicy.UserCache\User\MIC ROSOFT\IEAK\install.ins to
C:\WINDOWS\System32\GroupPolicy\User\MICROSOFT\IEA K\install.ins
Copied file C:\WINDOWS\System32\GroupPolicy.UserCache\User\Reg istry.pol to
C:\WINDOWS\System32\GroupPolicy\User\Registry.pol
Copied file
C:\WINDOWS\System32\GroupPolicy.UserCache\Machine\ Microsoft\Windows
NT\SecEdit\IPS1.dat to
C:\WINDOWS\System32\GroupPolicy\Machine\Microsoft\ Windows
NT\SecEdit\IPS1.dat
Copied file
C:\WINDOWS\System32\GroupPolicy.UserCache\Machine\ Microsoft\Windows
NT\SecEdit\IPS2.dat to
C:\WINDOWS\System32\GroupPolicy\Machine\Microsoft\ Windows
NT\SecEdit\IPS2.dat
Copied file
C:\WINDOWS\System32\GroupPolicy.UserCache\Machine\ Microsoft\Windows
NT\SecEdit\IPS3.dat to
C:\WINDOWS\System32\GroupPolicy\Machine\Microsoft\ Windows
NT\SecEdit\IPS3.dat
Copied file
C:\WINDOWS\System32\GroupPolicy.UserCache\Machine\ Microsoft\Windows
NT\SecEdit\XPSec.dat to
C:\WINDOWS\System32\GroupPolicy\Machine\Microsoft\ Windows
NT\SecEdit\XPSec.dat
Copied file C:\WINDOWS\System32\GroupPolicy.UserCache\Machine\ Registry.pol
to C:\WINDOWS\System32\GroupPolicy\Machine\Registry.p ol
GP_FLAG_APPLY_SECURITY_SETTINGS (0x40), not set, or security file already
copied. Will not copy security file
Exiting GPCopy 0x0
Writing Group Policy User Status to \HKLM\Software\Novell\Workstation
Manager\Group Policies
Wrote reg. value 0x3000 to Group Policy User Status in key
Software\Novell\Workstation Manager\Group Policies
Entered MergeGptFile(C:\WINDOWS\System32\GroupPolicy.UserC ache, 0x80000070)
g_dwVersion: 0x0.
Reading GPT Version from \HKLM\Software\Novell\Workstation Manager\Group
Policies
Read reg. value GPT Version: 0x70007 in key Software\Novell\Workstation
Manager\Group Policies
Found machine extensions...
Found user extensions...
Exiting MergeGptFile 0x0
Reading user's user settings.
Entered AppendPolicy
C:\WINDOWS\System32\GroupPolicy.UserCache\User\Reg istry.pol
Entered parseRegFile
Val: 'BlockExeAttachments'
Added: Software\Microsoft\Outlook Express\BlockExeAttachments
Val: 'NoHTMLWallPaper'
Added:
Software\Microsoft\Windows\CurrentVersion\Policies \ActiveDesktop\NoHTMLWallPaper
Val: '**del.NoChangingWallPaper'
Trying to delete key:
Software\Microsoft\Windows\CurrentVersion\Policies \ActiveDesktop, val:
NoChangingWallPaper
Added:
Software\Microsoft\Windows\CurrentVersion\Policies \ActiveDesktop\**del.NoChangingWallPaper
Val: 'ForceClassicControlPanel'
Added:
Software\Microsoft\Windows\CurrentVersion\Policies \Explorer\ForceClassicControlPanel
Val: 'NoSMMyPictures'
Added:
Software\Microsoft\Windows\CurrentVersion\Policies \Explorer\NoSMMyPictures
Val: 'NoStartMenuMyMusic'
Added:
Software\Microsoft\Windows\CurrentVersion\Policies \Explorer\NoStartMenuMyMusic
Val: 'NoDesktopCleanupWizard'
Added:
Software\Microsoft\Windows\CurrentVersion\Policies \Explorer\NoDesktopCleanupWizard
Val: 'NoWelcomeScreen'
Added:
Software\Microsoft\Windows\CurrentVersion\Policies \Explorer\NoWelcomeScreen
Val: 'NoActiveDesktop'
Added:
Software\Microsoft\Windows\CurrentVersion\Policies \Explorer\NoActiveDesktop
Val: '**del.NoInternetIcon'
Trying to delete key:
Software\Microsoft\Windows\CurrentVersion\Policies \Explorer, val:
NoInternetIcon
Added:
Software\Microsoft\Windows\CurrentVersion\Policies \Explorer\**del.NoInternetIcon
Val: '**del.NoNetHood'
Trying to delete key:
Software\Microsoft\Windows\CurrentVersion\Policies \Explorer, val: NoNetHood
Added:
Software\Microsoft\Windows\CurrentVersion\Policies \Explorer\**del.NoNetHood
Val: 'NoAutoUpdate'
Added:
Software\Microsoft\Windows\CurrentVersion\Policies \Explorer\NoAutoUpdate
Val: 'NoSMBalloonTip'
Added:
Software\Microsoft\Windows\CurrentVersion\Policies \Explorer\NoSMBalloonTip
Val: 'NoSMConfigurePrograms'
Added:
Software\Microsoft\Windows\CurrentVersion\Policies \Explorer\NoSMConfigurePrograms
Val: 'NoComputersNearMe'
Added:
Software\Microsoft\Windows\CurrentVersion\Policies \Explorer\NoComputersNearMe
Val: 'MaxRecentDocs'
Added:
Software\Microsoft\Windows\CurrentVersion\Policies \Explorer\MaxRecentDocs
Val: 'NoSharedDocuments'
Added:
Software\Microsoft\Windows\CurrentVersion\Policies \Explorer\NoSharedDocuments
Val: '**del.NoStartMenuEjectPC'
Trying to delete key:
Software\Microsoft\Windows\CurrentVersion\Policies \Explorer, val:
NoStartMenuEjectPC
Added:
Software\Microsoft\Windows\CurrentVersion\Policies \Explorer\**del.NoStartMenuEjectPC
Val: 'NoActiveDesktopChanges'
Added:
Software\Microsoft\Windows\CurrentVersion\Policies \Explorer\NoActiveDesktopChanges
Val: '**del.NoAddPrinter'
Trying to delete key:
Software\Microsoft\Windows\CurrentVersion\Policies \Explorer, val:
NoAddPrinter
Added:
Software\Microsoft\Windows\CurrentVersion\Policies \Explorer\**del.NoAddPrinter
Val: '**del.NoDeletePrinter'
Trying to delete key:
Software\Microsoft\Windows\CurrentVersion\Policies \Explorer, val:
NoDeletePrinter
Added:
Software\Microsoft\Windows\CurrentVersion\Policies \Explorer\**del.NoDeletePrinter
Val: '**del.NoToolbarsOnTaskbar'
Trying to delete key:
Software\Microsoft\Windows\CurrentVersion\Policies \Explorer, val:
NoToolbarsOnTaskbar
Added:
Software\Microsoft\Windows\CurrentVersion\Policies \Explorer\**del.NoToolbarsOnTaskbar
Val: '**del.NoSetTaskbar'
Trying to delete key:
Software\Microsoft\Windows\CurrentVersion\Policies \Explorer, val:
NoSetTaskbar
Added:
Software\Microsoft\Windows\CurrentVersion\Policies \Explorer\**del.NoSetTaskbar
Val: 'ForceStartMenuLogOff'
Added:
Software\Microsoft\Windows\CurrentVersion\Policies \Explorer\ForceStartMenuLogOff
Val: '{20D04FE0-3AEA-1069-A2D8-08002B30309D}'
Added:
Software\Microsoft\Windows\CurrentVersion\Policies \NonEnum\{20D04FE0-3AEA-1069-A2D8-08002B30309D}
Val: '**del.{450D8FBA-AD25-11D0-98A8-0800361B1103}'
Trying to delete key:
Software\Microsoft\Windows\CurrentVersion\Policies \NonEnum, val:
{450D8FBA-AD25-11D0-98A8-0800361B1103}
Added:
Software\Microsoft\Windows\CurrentVersion\Policies \NonEnum\**del.{450D8FBA-AD25-11D0-98A8-0800361B1103}
Val: '**del.{645FF040-5081-101B-9F08-00AA002F954E}'
Trying to delete key:
Software\Microsoft\Windows\CurrentVersion\Policies \NonEnum, val:
{645FF040-5081-101B-9F08-00AA002F954E}
Added:
Software\Microsoft\Windows\CurrentVersion\Policies \NonEnum\**del.{645FF040-5081-101B-9F08-00AA002F954E}
Val: '**del.Wallpaper'
Trying to delete key:
Software\Microsoft\Windows\CurrentVersion\Policies \System, val: Wallpaper
Added:
Software\Microsoft\Windows\CurrentVersion\Policies \System\**del.Wallpaper
Val: '**del.WallpaperStyle'
Trying to delete key:
Software\Microsoft\Windows\CurrentVersion\Policies \System, val:
WallpaperStyle
Added:
Software\Microsoft\Windows\CurrentVersion\Policies \System\**del.WallpaperStyle
Val: 'NoDispScrSavPage'
Added:
Software\Microsoft\Windows\CurrentVersion\Policies \System\NoDispScrSavPage
Val: 'NoAddFromNetwork'
Added:
Software\Microsoft\Windows\CurrentVersion\Policies \Uninstall\NoAddFromNetwork
Val: '**del.NoAddRemovePrograms'
Trying to delete key:
Software\Microsoft\Windows\CurrentVersion\Policies \Uninstall, val:
NoAddRemovePrograms
Added:
Software\Microsoft\Windows\CurrentVersion\Policies \Uninstall\**del.NoAddRemovePrograms
Val: 'ListBox_Support_Allow'
Added: Software\Policies\Microsoft\Internet Explorer\New
Windows\ListBox_Support_Allow
Val: '*.fleetviewonline.com'
Added: Software\Policies\Microsoft\Internet Explorer\New
Windows\Allow\*.fleetviewonline.com
Val: '*.osg.com'
Added: Software\Policies\Microsoft\Internet Explorer\New
Windows\Allow\*.osg.com
Val: 'NoHelpItemTutorial'
Added: Software\Policies\Microsoft\Internet
Explorer\Restrictions\NoHelpItemTutorial
Val: 'NoHelpItemNetscapeHelp'
Added: Software\Policies\Microsoft\Internet
Explorer\Restrictions\NoHelpItemNetscapeHelp
Val: 'NoHelpItemSendFeedback'
Added: Software\Policies\Microsoft\Internet
Explorer\Restrictions\NoHelpItemSendFeedback
Val: 'PreventAutoRun'
Added: Software\Policies\Microsoft\Messenger\Client\Preve ntAutoRun
Val: ''
Added: Software\Policies\Microsoft\SystemCertificates\Tru st\Certificates\
Val: ''
Added: Software\Policies\Microsoft\SystemCertificates\Tru st\CRLs\
Val: ''
Added: Software\Policies\Microsoft\SystemCertificates\Tru st\CTLs\
Val: 'ScreenSaverIsSecure'
Added: Software\Policies\Microsoft\Windows\Control
Panel\Desktop\ScreenSaverIsSecure
Val: 'ScreenSaveActive'
Added: Software\Policies\Microsoft\Windows\Control
Panel\Desktop\ScreenSaveActive
Val: 'ScreenSaveTimeOut'
Added: Software\Policies\Microsoft\Windows\Control
Panel\Desktop\ScreenSaveTimeOut
Val: 'SCRNSAVE.EXE'
Added: Software\Policies\Microsoft\Windows\Control
Panel\Desktop\SCRNSAVE.EXE
Val: 'ListBox_Support_ZoneMapKey'
Added: Software\Policies\Microsoft\Windows\CurrentVersion \Internet
Settings\ListBox_Support_ZoneMapKey
Val: '*.osg.com'
Added: Software\Policies\Microsoft\Windows\CurrentVersion \Internet
Settings\ZoneMapKey\*.osg.com
Val: 'osgintranet'
Added: Software\Policies\Microsoft\Windows\CurrentVersion \Internet
Settings\ZoneMapKey\osgintranet
Val: '1A00'
Added: Software\Policies\Microsoft\Windows\CurrentVersion \Internet
Settings\Zones\1\1A00
Val: '1809'
Added: Software\Policies\Microsoft\Windows\CurrentVersion \Internet
Settings\Zones\1\1809
Val: '1803'
Added: Software\Policies\Microsoft\Windows\CurrentVersion \Internet
Settings\Zones\1\1803
Val: 'DontPromptForWindowsUpdate'
Added:
Software\Policies\Microsoft\Windows\DriverSearchin g\DontPromptForWindowsUpdate
Val: 'NC_RenameLanConnection'
Added: Software\Policies\Microsoft\Windows\Network
Connections\NC_RenameLanConnection
Val: 'PromptPasswordOnResume'
Added:
Software\Policies\Microsoft\Windows\System\Power\P romptPasswordOnResume
Val: 'NoAUAsDefaultShutdownOption'
Added:
Software\Policies\Microsoft\Windows\WindowsUpdate\ AU\NoAUAsDefaultShutdownOption
Val: 'NoAUShutdownOption'
Added:
Software\Policies\Microsoft\Windows\WindowsUpdate\ AU\NoAUShutdownOption
Val: 'BehaviorOnFailedVerify'
Added: Software\Policies\Microsoft\Windows NT\Driver
Signing\BehaviorOnFailedVerify
Val: 'MovieMaker'
Added: Software\Policies\Microsoft\WindowsMovieMaker\Movi eMaker
Exiting parseRegFile
Exiting AppendPolicy
C:\WINDOWS\System32\GroupPolicy.UserCache\User\Reg istry.pol 0x0
Reading user's computer settings.
Entered AppendPolicy
C:\WINDOWS\System32\GroupPolicy.UserCache\Machine\ Registry.pol
Entered parseRegFile
Val: 'NoUpdateCheck'
Added: Software\Policies\Microsoft\Internet
Explorer\Infodelivery\Restrictions\NoUpdateCheck
Val: 'NoSplash'
Added: Software\Policies\Microsoft\Internet
Explorer\Infodelivery\Restrictions\NoSplash
Val: 'PreventAutoRun'
Added: Software\Policies\Microsoft\Messenger\Client\Preve ntAutoRun
Val: 'NV PrimaryDnsSuffix'
Added: Software\Policies\Microsoft\System\DNSClient\NV PrimaryDnsSuffix
Val: ''
Added: Software\Policies\Microsoft\Windows\Safer\
Val: 'WUServer'
Added: Software\Policies\Microsoft\Windows\WindowsUpdate\ WUServer
Val: 'WUStatusServer'
Added: Software\Policies\Microsoft\Windows\WindowsUpdate\ WUStatusServer
Val: 'NoAutoRebootWithLoggedOnUsers'
Added:
Software\Policies\Microsoft\Windows\WindowsUpdate\ AU\NoAutoRebootWithLoggedOnUsers
Val: 'AutoInstallMinorUpdates'
Added:
Software\Policies\Microsoft\Windows\WindowsUpdate\ AU\AutoInstallMinorUpdates
Val: 'DetectionFrequencyEnabled'
Added:
Software\Policies\Microsoft\Windows\WindowsUpdate\ AU\DetectionFrequencyEnabled
Val: 'DetectionFrequency'
Added:
Software\Policies\Microsoft\Windows\WindowsUpdate\ AU\DetectionFrequency
Val: 'UseWUServer'
Added: Software\Policies\Microsoft\Windows\WindowsUpdate\ AU\UseWUServer
Val: 'RescheduleWaitTimeEnabled'
Added:
Software\Policies\Microsoft\Windows\WindowsUpdate\ AU\RescheduleWaitTimeEnabled
Val: 'RescheduleWaitTime'
Added:
Software\Policies\Microsoft\Windows\WindowsUpdate\ AU\RescheduleWaitTime
Val: 'NoAutoUpdate'
Added: Software\Policies\Microsoft\Windows\WindowsUpdate\ AU\NoAutoUpdate
Val: 'AUOptions'
Added: Software\Policies\Microsoft\Windows\WindowsUpdate\ AU\AUOptions
Val: 'ScheduledInstallDay'
Added:
Software\Policies\Microsoft\Windows\WindowsUpdate\ AU\ScheduledInstallDay
Val: 'ScheduledInstallTime'
Added:
Software\Policies\Microsoft\Windows\WindowsUpdate\ AU\ScheduledInstallTime
Val: 'RegistrationOverwritesInConflict'
Added: Software\Policies\Microsoft\Windows
NT\DNSClient\RegistrationOverwritesInConflict
Val: 'SearchList'
Added: Software\Policies\Microsoft\Windows NT\DNSClient\SearchList
Val: 'PreventIISInstall'
Added: Software\Policies\Microsoft\Windows NT\IIS\PreventIISInstall
Val: 'SecurityCenterInDomain'
Added: Software\Policies\Microsoft\Windows NT\Security
Center\SecurityCenterInDomain
Exiting parseRegFile
Exiting AppendPolicy
C:\WINDOWS\System32\GroupPolicy.UserCache\Machine\ Registry.pol 0x0
Entered GenerateGptFile(C:\WINDOWS\System32\GroupPolicy)
g_dwVersion: 0x70007.
Writing GPT Version to \HKLM\Software\Novell\Workstation Manager\Group
Policies
Wrote reg. value 0x70007 to GPT Version in key Software\Novell\Workstation
Manager\Group Policies
Exiting GenerateGptFile 0x0
Exiting RestoreCachedGP 0x0
Writing Group Policy User Status to \HKLM\Software\Novell\Workstation
Manager\Group Policies
Wrote reg. value 0x3000 to Group Policy User Status in key
Software\Novell\Workstation Manager\Group Policies
Bumping GPT version...
Entered SetGptVersion(0x0, TRUE).
Reading GPT Version from \HKLM\Software\Novell\Workstation Manager\Group
Policies
Read reg. value GPT Version: 0x70007 in key Software\Novell\Workstation
Manager\Group Policies
Read file C:\WINDOWS\System32\GroupPolicy\GPT.ini
Found version 0x70007 in gpt.ini
Using version: 0x70007
Saving GPT version: 0x80008
Writing GPT Version to \HKLM\Software\Novell\Workstation Manager\Group
Policies
Wrote reg. value 0x80008 to GPT Version in key Software\Novell\Workstation
Manager\Group Policies
Exiting SetGptVersion 0x0.
Entered AppendSecuritySettings
Inf path: C:\WINDOWS\System32\GroupPolicy\Machine\Microsoft\ Windows
NT\SecEdit\XPSec.dat
Restoring GP settings
Loading Account Policies...
Loading Audit Policies...
Loading user rights...
Restoring security options...
No data
No data
No data
No data
No data
No data
No data
No data
No data for Administrator account name.
LoadXPSecuritySettings returning 0
LoadHive entered
LoadHive exit : 0
Exiting AppendSecuritySettings 0x0
Signalling OS to refresh policies
RegQueryValueEx returned 2
Policies are set to apply asynchronously
Policies will be processed asynchronously
Entered SetGptVersion(0x0, TRUE).
Reading GPT Version from \HKLM\Software\Novell\Workstation Manager\Group
Policies
Read reg. value GPT Version: 0x80008 in key Software\Novell\Workstation
Manager\Group Policies
Read file C:\WINDOWS\System32\GroupPolicy\GPT.ini
Found version 0x80008 in gpt.ini
Using version: 0x80008
Saving GPT version: 0x90009
Writing GPT Version to \HKLM\Software\Novell\Workstation Manager\Group
Policies
Wrote reg. value 0x90009 to GPT Version in key Software\Novell\Workstation
Manager\Group Policies
Exiting SetGptVersion 0x0.
Entering RunGPUpdate
Exiting RunGPUpdate 0
Exiting ApplyPolicies 0x0
Writing Last Run Time High to \HKLM\Software\Novell\Workstation
Manager\Group Policies
Wrote reg. value 0x1c58076 to Last Run Time High in key
Software\Novell\Workstation Manager\Group Policies
Writing Last Run Time Low to \HKLM\Software\Novell\Workstation Manager\Group
Policies
Wrote reg. value 0x34349ce0 to Last Run Time Low in key
Software\Novell\Workstation Manager\Group Policies
Apply user policies releasing mutex.
Exiting WMHelperInteractiveUserEntry ccode: 0x0
Closing log file.
WMHelperInitialization (Mar 4 2004) called! Flags: 0x2001. Event: 0x2000.
Impersonation: 0x1
Opened Mutex.
Loaded userenv.dll
Mapped function RefreshPolicy
Mapped function RegisterGPNotification
Mapped function UnregisterGPNotification
Mapped function RefreshPolicyEx
Exiting WMHelperInitialization. Returning flags: 0x11
Entering WMHelperInteractiveUserEntry!
szFullDN = CN=wintest3.OU=Users.OU=Newcastle.O=OSG
DN is Typed convert it to TYPELESS
g_szUserDN = wintest3.Users.Newcastle.OSG
GinaGetUsersSIDInTextualForm ENTERED
Textual SID : S-1-5-21-1214440339-507921405-1708537768-1019
GinaGetUsersSIDInTextualForm EXIT : 0
Writing Don't reparse to \HKLM\Software\Novell\Workstation Manager\Group
Policies
Wrote reg. value 0x0 to Don't reparse in key Software\Novell\Workstation
Manager\Group Policies
Current time high: 0x1c58076
Reading Last Run Time High from \HKLM\Software\Novell\Workstation
Manager\Group Policies
Read reg. value Last Run Time High: 0x1c58076 in key
Software\Novell\Workstation Manager\Group Policies
Previous time high: 0x1c58076
Writing Don't reparse to \HKLM\Software\Novell\Workstation Manager\Group
Policies
Wrote reg. value 0x1 to Don't reparse in key Software\Novell\Workstation
Manager\Group Policies
Writing User Logged In to \HKLM\Software\Novell\Workstation Manager\Group
Policies
Wrote reg. value 0x1 to User Logged In in key Software\Novell\Workstation
Manager\Group Policies
Entered CheckForObsoleteWksCache
CN=LT_VECTOR.OU=Workstations.OU=Newcastle.O=OSG.
Full Object DN
CN=LT_VECTOR.OU=Workstations.OU=Newcastle.O=OSG.OU =Users.OU=Newcastle.O=OSG
Calling WMGetAllAssociatedObjects(FALSE, MARITIME, 1,
CN=LT_VECTOR.OU=Workstations.OU=Newcastle.O=OSG.OU =Users.OU=Newcastle.O=OSG,
WINNT Workstation Package, zenwmGroupPolicy, 512, pBuffer)
WMGetAllAssociatedObject returned 2
No associated workstation policies. Deleting
C:\WINDOWS\System32\GroupPolicy.WksCache.
DeleteGPRegVal: Error 0x2 deleting Group Policy Machine Flags
Exiting CheckForObsoleteWksCache 2
Applying user policies
Reading Don't reparse from \HKLM\Software\Novell\Workstation Manager\Group
Policies
Read reg. value Don't reparse: 0x1 in key Software\Novell\Workstation
Manager\Group Policies
Reading Group Policy User Status from \HKLM\Software\Novell\Workstation
Manager\Group Policies
Read reg. value Group Policy User Status: 0x3000 in key
Software\Novell\Workstation Manager\Group Policies
Read reg. key Group Policy User Status: 0x3000
Policy applied at predesktop. Skipping reapplication at user login.
Writing Don't reparse to \HKLM\Software\Novell\Workstation Manager\Group
Policies
Wrote reg. value 0x0 to Don't reparse in key Software\Novell\Workstation
Manager\Group Policies
Writing Last Run Time High to \HKLM\Software\Novell\Workstation
Manager\Group Policies
Wrote reg. value 0x1c58076 to Last Run Time High in key
Software\Novell\Workstation Manager\Group Policies
Writing Last Run Time Low to \HKLM\Software\Novell\Workstation Manager\Group
Policies
Wrote reg. value 0x38844da0 to Last Run Time Low in key
Software\Novell\Workstation Manager\Group Policies
Apply user policies releasing mutex.
Exiting WMHelperInteractiveUserEntry ccode: 0x0
Closing log file.
Thanks in advance
Ali

DUPLICATE
Answered in
novell.support.zenworks.desktops.3x.workstation-manager
Regards
Rolf Lidvall
Swedish Radio (Ltd)
NSC SysOp

Enable User Rights using Adobe Acrobat Professional 7

I created an editable PDF form using LifeCycle Designer 7.0. My goal is to have users fill out the form and email the actual filled out form not the XML code. I added a regualr button with the following java script.
event.target.submitForm({cURL:"mailto:[email protected]?subject=Submitted Form&body=Please find attached the completed form.",cSubmitAs:"PDF",cCharset:"utf-8"});
Show = Click
Language = JavaScript
Run At = Client
When I test the button in Adobe Professional or in LifeCycle the button works fine. However when I open the file in Reader 9, it does not work. I do not encuonter any error messages. Nothing happens when you click on the button. I thought that users rights need to be enabled in order for it to work. Unfortunately I do not see how to do this Adobe Acrobat Professional 7. I do not have Adobe Acrobat Professional 8. Any ideas on what I can do to correct this issue?

For Reader users and AA7, your only choice is to have the XML file submitted. Then simply open the form in Acrobat and import the XML data file to fill the form. This will be exactly what the user saw when they submitted it. Thus there is no need to submit the entire form.

Upgrading to Acrobat Pro XI / Adobe Reader XI and enabling user rights

My company is a little behind on software updates and I'm going to ask for Adobe Reader XI to pushed out company wide since allows the user to save a filled-in PDF form.
Right now I'm using Acrobat Pro X, and suspect I will need to upgrade as well.
My questions are:
With the new-found ability of Reader to finally be able to save a filled in form, how does this effect the "enabling user rights" scenario?
Is it needed if the entire company is using Adobe Reader XI?
I did a test in Adobe Reader XI, and sure enough, I was able to save a filled-in form...BUT, I could not digitally sign the form.
Is this where the enabling user rights is still mandatory?
Or is this because the form was designed in Acrobat Pro X?
Does Acrobat Pro XI work around this?
I know I don't need to upgrade to Acrobat Pro XI to continue making forms, but should I?
Thanks for your feed back, and I look forward to reading your replies

Thank you, George, for the prompt reply!
I suspected as much, but couldn't find a clear cut answer in my searches.
The tab order update alone has convinced me its worth pushing for the new Acrobat Pro XI.
The update to Adobe Reader XI will make many of our forms easier to get into the digital workflow, and I'm looking forward to getting use further away from a paper-based system

Right Justification in File Content Conversion

I have a requirement where the data should be right justified in File content conversion of a Receiver Adapter .
For example it should be coming as " 5864" instead of "5864 ". Please help in completing this requirement.

Hi Srinath
AFAIK, there is no setting in FCC to achieve this. You can do this instead in the Message Mapping step by doing a right justify on that target fields.
You can search for plenty of solutions on the internet to perform a right justify and include it in a UDF.
Below is an example of a UDF of execution type single values with single input. It right justifies the String based on a total length of 15. You can change the field length according to your requirement.
return String.format("%15s", input);
Rgds
Eng Swee

SYBASE user rights to modify datatbase content

Similar Messages

Maybe you are looking for