% Symbol in report after calculation

Hi, I have two key figures in my report. I want to calculate the percentage of KF1 to KF2. Say KF1 is 20 and KF2 is 100. My KF3 is the formula and it should 20 %. I am using the %A operator and it is just returning the value 20 and the % Symbol following the value 20 is missing. Can someone please suggest me how to get this value in the report?
Thanks in advance.

It sounds like you have turned on the "Display Scaling Factors" option in the Query Properties screen. If this is not needed for another key figure, you can turn this off and the "%" will not appear in the header.
Hope this helps...
Bob

Similar Messages

Clear the values in the ALV report after calculating Subtotals

Hi All,
In my ALV report, I am displaying subtotals by passing DO_SUM in the Field Catalog.
Now my problem is in the display I do not want the individual values to be displayed, I want to hide the values in the column(Not the whole column) but I want to display the subtotal of these values in the Subtotal Row.
Example:
Item1   10   20
Item2   20   30
Item3   10   50
           40   100
As per our requirements, the output should be
Item1
Item2
Item3
          40   100
How can this be done? Please suggest.

Populate i_sort table for the fields for which u want subtotal as shown below:
*&      Form sub_populate_sort
      Populate ALV sort table
      No Parameter
FORM sub_populate_sort .
Sort on material
wa_sort-spos = '01' .
wa_sort-fieldname = 'MATNR'.
wa_sort-tabname = 'I_EKPO'.
wa_sort-up = 'X'.
wa_sort-subtot = 'X'.
APPEND wa_sort TO i_sort .
CLEAR wa_sort.
Sort on plant
wa_sort-spos = '02'.
wa_sort-fieldname = 'WERKS'.
wa_sort-tabname = 'I_EKPO'.
wa_sort-up = 'X'.
wa_sort-subtot = 'X'.
APPEND wa_sort TO i_sort .
CLEAR wa_sort.
ENDFORM.                    " sub_populate_sort
Then when populating the field catalog tables use:
wa_lfl_fcat-no_out         = 'X'.        "No output
Then display ur data:
This function module for displaying the ALV report
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
    EXPORTING
      i_callback_program       = l_repid
      i_callback_top_of_page   = 'SUB_ALV_TOP_OF_PAGE'
      is_layout                = wa_layout
      it_fieldcat              = i_fieldcat
      it_sort = i_sort
      it_events                = i_event
      i_default                = 'X'
      i_save                   = 'A'
    TABLES
      t_outtab                 = i_ekpo
    EXCEPTIONS
      program_error            = 1
      OTHERS                   = 2.
Regards,
Joy.

Slow Reports after adding calculated item

Hi All,
I am facing a slow response after adding few calculated items in a report. Is it a normal behavior of OBIEE in terms of adding calculated items?
Anyone faced similar issue please comment.
Thanks,
Muhammad Waqas

Hi Muhammad Waqas,
Have you run the physical query that is generated by BI Server on Database? Once executed on database, compare the execution time with OBIEE execution times, with this you will get the answer.
Depends on the amount of data and the type of calculation, it is normal behaviour to slow down the performance of the reports after adding calculated measures.
Please mark it Helpful/Correct, if it is.
est Regards,
Kalyan Chukkapalli
http://123obi.com

To Display Currency /Currency Symbol in Report

Hi All,
Business Requirement:
Want to see Actual and Headcount in same column along with currency.
currently we have separate column for headcount and Actual as below. (Actual and headcount will not come in same row.)
Company
Actual
Headcount
C1
$ 1000
C1
10
C2
$ 1000
C2
20
C3
$ 2000
C3
20
C4
$ 3000
C4
30
To display both in same column , I have used NOT function in formula and displayed the report as Below.
Company
Act&HC
C1
1000
C1
10
C2
1000
C2
20
C3
2000
C3
20
C4
3000
C4
30
I have calculated the above column using NODIM, so we are not getting $ symbol in report.
But business want that symbol to appear along with Actual value ($ 1000).
Please suggest if there is any way to do this.
Thanks,
Jaya

Hello Jay,
I think Koen Hesters is right. If you use you currency from your unit-dimension you will be able to get currencies in a separate column but not with the figures attached.
The only thing is that you will get # or not-assigned for the headcount values. If you are using BO tools on top of this BEx report then there is a chance to display currency also in the same column for the Actual values.
Here check the sample scenario which i tried to develop by looking at your data :
Kindly click on the screenshot to have a better view.
Output :
Regards,
Ashutosh Singh

Print a report after transaction

Hi,
I want to know if there is any solution to print a report after a transaction (after commit).
when i do any modification in a table, i want to print data that have been modified.
thanks in advance for your helps.

Have you given thought for Oracle Alert.

Returning to the parameter form in a report after closing the report page

hi all,
tell me a way to get the following solution
how can we return back to the parameter form of a "parameterised
report" after closing to the report window.
i ve tried a little bit with "srw_run_report"
reply me as quick as possible
prabhakaran

Try using menu options
Tools\Parameter Form Builder
you can either select/deselect any parameter from the list

SUBMIT an ABAP report after creating the WI but before completion of WI.

Dear All,
I am having an activity which sends the approval work item.
Now my requirement is to SUBMIT an ABAP report after creating the WI but before completion of WI.
I can not call this report before approval activity because i need to pass this WI ID to this report.
Please suggest some way to solve this.
Regards,
Amar

Hello,
You could create a 2-from-2 fork and put the workitem in one branch and the report in the other. Have the report branch wait 1 minute and then read the workitem id from the other branch.
What is the purpose of this report? Why does it need the workitem id?
regards
Rick Bakker
hanabi technology

Hyperion IR 9.3.1 - Issue in printing the report after exporting it to pdf

Hi All,
I am facing a problem in printing the report after exporting it to pdf format using Hyperion Interactive Reporting 9.3.1. I have set page size of report section to 11X17 inch landscape. Now I am exporting this report section to pdf. Report gets exported to pdf with size 11X17 inch landsacpe. But when I am trying to print this pdf it is shrinking the documnet size to A4 size paper and printing it rather it should print it on 11X17 inch paper size. Please suggest if there is fix available for this issue.
Thanks
Ujjawal

"File > Print Setup > Paper > Size" on PDF.
I think this issue is only to do with the printer and not IR.
I think the question now is "Can your printer print 11X17 pages or not".

Not able to generate reports after 8.1.1.3 patch installation

Hi All,
We are not able to generate reports after 8.1.1.3 patch installtion.
and we also followed workaround as below
1) Import the sif files from Siebel\8.1\Tools_1\REPPATCH\12-1VMBCSV.zip
2) Import the 4 SIF files in the following order:
S_XMLP_REP_TMPL_02112010.sif
SBL_XMLP_REPORT_SELECTION_FLG.sif
Report Template BC.sif
Report Template Registration Applet.sif
3)Apply the DDL for table S_XMLP_REP_TMPL and compile repository
Still not able to generate Reports.
Below is error message
Please ask your systems administrator to check your application configuration.
ObjMgrMiscLog Error 1 000000064e150fa0:0 2011-07-07 19:45:31 (busobj.cpp (1654)) SBL-DAT-00222: An error has occurred creating business component 'Report Template Position BC' used by business object 'Report Administration'.
Please ask your systems administrator to check your application configuration.
ObjMgrBusServiceLog Error 1 000000064e150fa0:0 2011-07-07 19:45:31 (swemenusvc.cpp (406)) SBL-DAT-00222: An error has occurred creating business component '<?>' used by business object '<?>'.
Please ask your systems administrator to check your application configuration.
Thanks
Sean

Hi Rajan,
Thankyou for for your reply.
Reports were working fine and we are able to generate reports at configured views in 8.1.1.1 version.
After installing 8.1.1.3 patch, if we click on reports icon below is the error message displayed.
An error has occurred creating business component '<?>' used by business object '<?>'.
Please ask your systems administrator to check your application configuration. (SBL-DAT-00222).
- is it mandatory to configure security model?(in 8.1.1.1 we used default security model)?
-is it necessary to import BIPDataService and BIPSiebelSecurityWS inbound Web Services?
- I didn't see below views as mentioned in bookshelf.
. Reports - Custom Templates
. Reports - Standard Templates?
Thanks
Sean

Triggering a report after the completion of processing the session

Hi Friends,
I want to know how to trigger an report after the completion of processing the session.
Thanks,
Raj

Hi
        SELECTION-SCREEN                               *
PARAMETERS: p_name     LIKE apqi-groupid,
            p_datum    LIKE apqi-credate,
            p_time     LIKE apqi-cretime,
            p_event    LIKE tbtco-eventid.
             DATA                                     *
DATA: fl_job_ok TYPE c,
      fl_event TYPE c,
      cont_sysubrc_6 TYPE i.
DATA: start_time LIKE sy-uzeit,
      start_date LIKE sy-datum,
      time       LIKE sy-uzeit,
      delta_time TYPE i.
DATA: apqitab LIKE STANDARD TABLE OF apqi WITH HEADER LINE.
DATA:
btc_running       LIKE tbtco-status VALUE 'R',
btc_ready         LIKE tbtco-status VALUE 'Y',
btc_scheduled     LIKE tbtco-status VALUE 'P',
btc_released      LIKE tbtco-status VALUE 'S',
btc_aborted       LIKE tbtco-status VALUE 'A',
btc_finished      LIKE tbtco-status VALUE 'F',
btc_put_active    LIKE tbtco-status VALUE 'Z',
btc_unknown_state LIKE tbtco-status VALUE 'X'.
                     START-OF-SELECTION                              *
START-OF-SELECTION.
DATA: a VALUE '1', b.
Controllo esistenza job:
start_time = sy-uzeit.
start_date = sy-datum.
DO.
    apqitab-creator = sy-uname.
    CALL FUNCTION 'BDC_OBJECT_SELECT'
      EXPORTING
        name                   = p_name
        datatype               = 'BDC'
    CLIENT                 = SY-MANDT
        date_from              = p_datum
    DATE_TO                =
        time_from              = p_time
    TIME_TO                =
       QSTATE                 = 'F'
        session_creator        = apqitab-creator
      TABLES
        apqitab                = apqitab
      EXCEPTIONS
        invalid_datatype       = 1
        OTHERS                 = 2.
    IF sy-subrc <> 0.
      fl_job_ok = space.
    ELSE.
      LOOP AT apqitab.
        CASE apqitab-qstate.
          WHEN 'F'.          fl_job_ok = 'X'. EXIT.
          WHEN 'E'.          fl_job_ok = 'E'. EXIT.
          WHEN OTHERS.       fl_job_ok = space.
        ENDCASE.
      ENDLOOP.
      IF fl_job_ok = 'X' OR fl_job_ok = 'E'.
        EXIT.
      ENDIF.
    ENDIF.
    IF start_date <> sy-datum.
      start_time = sy-uzeit.
    ENDIF.
    time = sy-uzeit.
    delta_time = time - start_time.
    IF delta_time > 1800.
      EXIT.
    ENDIF.
    REFRESH apqitab.
ENDDO.
IF fl_job_ok = 'X'. " Trovato JOB
    fl_event = 'X'.
    IF fl_event = 'X'.
Attiva evento
      CALL FUNCTION 'BP_EVENT_RAISE'
        EXPORTING
          eventid                = p_event
        EXCEPTIONS
          bad_eventid            = 1
          eventid_does_not_exist = 2
          eventid_missing        = 3
          raise_failed           = 4
          OTHERS                 = 5.
      IF sy-subrc <> 0.
        MESSAGE e999(zfagm) WITH p_event 'is not actived'(002).
      ELSE.
        MESSAGE i999(zfagm) WITH p_event 'is successfully actived'(002).
      ENDIF.
    ELSE.
      MESSAGE e999(zfagm) WITH p_event 'is not actived'(002).
    ENDIF.
ELSE.
    IF fl_job_ok = space.
      MESSAGE e999(zfagm) WITH p_event 'is successfully actived'(002).
    ELSE.
      MESSAGE e999(zfagm) WITH p_event 'is successfully actived'(002).
    ENDIF.
ENDIF.
Max

Execution of a report after execution of a transaction automatically

Dear All,
i want to execute one standard report after the completion of one transaction.
Can any body guide me in how to do this without executing the report separetly means the report should be called after the completion of the transaction automatically.
I dont want to use workflow also so is there any other way?
Warm Regards,
N.Jain

Hello,
What i understood was that you need to run a standard transaction after another transaction to run automatically.....
it is possible if the program for the first t-code is that of a 'Zprogram'
so in the program for the first tcode..if it is performing an operation and does not need user interaction(like user inputs) then in the end of the code,You need to
do a call transaction and return <b>or</b> Submit program and return
wherein you need to pass all sufficient parameters to the second program
Reward if helpful
Regards
Byju

How can I capture Webi server name in a webi report after refresh.

Hi Experts.
My BOE clustered with two or more webi server, I want to capture the webi server name in the webi report after I refreshed this report. Is there any standard webi funtion I can use to show the server name or any variable in the universe I can use?

Hi Bruce,
May the following links lead you to the solution......
[http://www.forumtopics.com/busobj/viewtopic.php?p=403480&sid=6cd088cfbf8cbffd78c17e0cbf280572|http://www.forumtopics.com/busobj/viewtopic.php?p=403480&sid=6cd088cfbf8cbffd78c17e0cbf280572]
[http://www.forumtopics.com/busobj/viewtopic.php?p=601777&sid=d6123b363d6af6b3cf0aaa6cef6eb86b]
Regards,
ArunKG

How to get a second page in a form letter report after create it by Wizard

How to get a second page in a form letter report after create it by Wizard
i've built a report by wizard with a sql-Query
the sql give me back for example 3 dataset
and the report prints 3 pages
dataset 1 - page 1
dataset 2 - page 1
dataset 3 - page 1
thats ok,
but now I need a second page per dataset ( with only a text )
so that the report should print 2 pages per dataset
dataset 1 - page 1 ,page 2
dataset 2 - page 1 ,page 2
dataset 3 - page 1 ,page 2
It's not really clear for me, what to do, to create the second page
any help ?

.... found answer in other forum

Getting 404 not found error-while creating classic report - after sql query

my work space - upgrade
while iam trying to develop a page today in work space - under classic report - after i provided the query and when pressed next to go to report attribuites section - iam facing 404 not found issue.,
this is happening just today.
and all teh other pages are working fine - do not know what ios the issue - can anybody help me here please..
query used for classic report
select DISTINCT cust.customer,prod.ebs_team
from
CUSTOMER_11i@upgrade Cust
,BUG_PRODUCTS@upgrade PROD
where 1=1
and cust.product_id = prod.product_id
and prod.prodline = 'EBS'
and IS_CUST_11 = 'YES'
and NVL(IS_CUST_121,'NO') = 'NO'
and NVL(IS_CUST_12,'NO') = 'NO'
order by 1;
with regards
Shiva Prasad.k
Edited by: user759720 on Feb 14, 2012 5:00 AM

Hi Shiva,
to diagnose a 404 error please have a look at http://www.inside-oracle-apex.com/oracle-apex-got-404-not-found-2/
This should give you sufficient information to find out what is actually failing.
Regards
Patrick
My Blog: http://www.inside-oracle-apex.com
APEX Plug-Ins: http://apex.oracle.com/plugins
Twitter: http://www.twitter.com/patrickwolf

RE: Reporting after many forte tasks run in batch mode?

Actually, if you're looking for MAKEAPPDISTRIB (I assume that's how you
create distributable) you can see if the command was succesfull or not.
<<deployrep.js>> This Jscript will look for this string and it will
generate a report based on the next line in the log file.
The script assumes you have an environment variable (DESCARTES_ROOT) that
points to a folder (let's say "D:\TEST"). Under that folder you have a log
folder ("d:\test\log") which holds the deploy.log log file. You can easily
change the script to reflect your systems settings.
The generated report looks like that : <<deployrep.txt>>
Norocel Popa
Forte SysEng
(519)746-8110 x 2292
-----Original Message-----
From: [email protected] [mailto:[email protected]]
Sent: Tuesday, March 16, 1999 11:58 AM
To: Forte-Users (Adresse de messagerie)
Subject: Reporting after many forte tasks run in batch mode ?
Hi,
I would like to know if overnight builds went okay, and therefore need to
parse the log(s).
The issue is that I don't have a proper string to look for (i.e. for
grep).
If I consider 'ERROR", then the following message won't be understandable.
There might a way to cheat with the indentation (i.e. the lines with only
two first blank chars)..
Has anyone experimented such a need ?
J-Paul Gabrielli
DTS
SYSTEM ERROR: Service object MySuperApplicationServer.MySuperMgrSO has
not been partitioned. Therefore, you cannot move it to an existing
partition.
Class: qqsp_UsageException
Error #: [1602, 606]
Detected at: qqcf_StandardConfig::MoveServiceObject at 3
Error Time: Tue Mar 16 17:39:26
Exception occurred (locally) on partition "Fscript_cl9_Client",
(partitionId = B84E6180-D639-11D2-82F2-1863030AAA77:0x244:0x1,
taskId =
[B84E6180-D639-11D2-82F2-1863030AAA77:0x244:0x1.1]) in application
"fscript", pid 22713 on node rambo in environment SuperEnv.

Hi,
To trap error message from Forte log, I usually do this
egrep '(EXCEPTION|Exception|exception|ERROR|Error|error)' filename
This takes a regular expression to 'egrep' all occurrences of "exception" or
"error" not matter they are in upper case or lower case.
Hope this help.
Regards,
Peter Sham.
-----Original Message-----
From: [email protected] [SMTP:[email protected]]
Sent: Wednesday, March 17, 1999 12:58 AM
To: Forte-Users (Adresse de messagerie)
Subject: Reporting after many forte tasks run in
batch mode ?
Hi,
I would like to know if overnight builds went okay, and
therefore need to parse the log(s).
The issue is that I don't have a proper string to look for
(i.e. for grep).
If I consider 'ERROR", then the following message won't be
understandable.
There might a way to cheat with the indentation (i.e. the
lines with only two first blank chars)..
Has anyone experimented such a need ?
J-Paul Gabrielli
DTS
SYSTEM ERROR: Service object
MySuperApplicationServer.MySuperMgrSO has
not been partitioned. Therefore, you cannot move it to an
existing partition.
Class: qqsp_UsageException
Error #: [1602, 606]
Detected at: qqcf_StandardConfig::MoveServiceObject at 3
Error Time: Tue Mar 16 17:39:26
Exception occurred (locally) on partition
"Fscript_cl9_Client",
(partitionId =
B84E6180-D639-11D2-82F2-1863030AAA77:0x244:0x1, taskId =
[B84E6180-D639-11D2-82F2-1863030AAA77:0x244:0x1.1]) in
application
"fscript", pid 22713 on node rambo in environment
SuperEnv.
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:<a href=
"http://pinehurst.sageit.com/listarchive/">http://pinehurst.sageit.com/listarchive/</a>>

% Symbol in report after calculation

Similar Messages

Maybe you are looking for