Sync issues after latest update.

I went to sync my ipod today, it told me it needed to update so i let it, once that update was done i noticed that it had removed all of my music from my ipod, annoying but didnt matter because i was just going to leave it to sync all 3207 songs from my pc to the ipod. Clicked on sync on Itunes, and the bar at the bottom doesnt show any music. After telling it to sync all the music and temporarliy have the music show up in the bar bellow, it still failed to sync music. Getting increasingly annoyed about this as every update to IOS or Itunes mucks everything up

Hello,
I am currently an owner of an Ipod Touch 4th generation. I see you are having problems with your Ipod Touch, so I will try to find a solution to your problem.
Hard Reset: Hold down the Sleep/Wake and Home buttons for at least 10sec. or until Apple logo appears
Have the latest Version of Itunes
Restart the Computer
Any error messages appear?
Hope that helps!
If none of the above solutions work, can you please respond back ASAP as I will try to find another solution to your problem (This might even help others with the same problem!)
Cheers!
Pizza98704

Similar Messages

  • Music syncing issue after latest update

    I'm having issues syncing my music on my iPhone 4 after this latest security update. Some of the files seem to be "stuck" on the phone. They won't remove, others just won't play, I can't add anything to the phone. Etc. SOS!!!

    Have you tried re-installing the firmware through Nokia Suite? Remember to backup all your phone contents when prompted by Nokia Suite.

  • Open GL issue after latest updates: Missing GL version

    Having issues with OpenGL after latest updates to OSX and Safari. iTunes will not display cover art and Angry Birds responds glewInit failed: Missing GL version. The is a Mac Pro with 10.7.4 and Safari 5.1.7.
    Anyelse seen this? How is this fixed?

    Final chapter in this saga for anyone else who experiences this.......run reparPermissions against your disks prior to upgrading. After having to rebuild the boot disk a couple of times and upgrade, had no problems with 10.7.4 but would always get Missing GL Version after Safari update. Ran DiskUtil and repaired permissions prior to Safari update and finally got it to pdate without causing GL issue.
    Still working on how to not need to delete my previous backups when rebuilding machine (apparently TimeMachine always tries to create a new back sparse folder and thus may waste original space from your previous backups).
    Thanks to A Brody for the suggestion about repairing disk permissions!
    Edward

  • MBPR wifi issues after latest update to 10.9.2

    Hi all,
    After the latest update to 10.9.2 my Macbook Pro Retina (1st gen) seems to be having issues re-connecting to wi-fi after I wake it up from sleep. Although I've read stories about wifi-issues with the retina line in general, I've been lucky enough to have mine run pretty smoothly so far. That is until the latest update ... for some reason, this happens EVERY time i close and open my laptop.
    And yes, it's a easy fix. Usually all i need to do is to turn off wifi and turn it on. But it's getting slightly annoying having to do that every time.
    Has anyone else had this issue? and are there by any chances a solution for this problem?
    Appreciate the help!
    All the best
    Farid

    Hello thegreatbeard,
    Thank you for the details of the issue you are experiencing with Wi-Fi on your MacBook Pro.  I would be concerned about this too.
    I recommend following the steps in the section labeled, "Symptom: The network connection drops unexpectedly" in the article below to resolve an issue like the one you described:
    Wi-Fi: How to troubleshoot Wi-Fi connectivity
    http://support.apple.com/kb/HT4628
    Thank you for posting in the Apple Support Community.
    Best,
    Sheila M.

  • MAJOR Wireless, Safari, Dock & Finder issues after latest updates

    I'm having major issues after the latest AirPort, Security Fix and Safari updates in 10.5.2: Safari keeps crashing every hour, Wireless connections time out and Airport occasionally crashes when I try to turn it off/on. Sometimes the systems gets stalled and has lag - I'm not sure if Safari crashing is causing this or it's the system that causes Safari to freeze and crash - often the dock becomes unresponsive too and makes me force shutdown and reboot. I've had to reboot like this more than 4 times today, something isn't right. My questions, therefore:
    1) Is there a way to restore my Mac to the state BEFORE the latest upgrades?
    2) I can't recall the exact names and versions of the updates, is there a way to access the update log files, so that I can take notes on what actually was updated and when?
    3) Is there any other way to access log files that may have more information on the crashes that I've had lately?
    Thanks in advance!

    Hi Reinis,
    In this situation, the first thing I would do is log into a different user account (if you do not have one, create one) and then see if the symptoms persist with the new user account. To directly answer your questions:
    1) Is there a way to restore my Mac to the state BEFORE the latest upgrades?
    Archive and Install using the OS DVD or by using Time Machine if you have it enabled.
    2) I can't recall the exact names and versions of the updates, is there a way to access the update log files, so that I can take notes on what actually was updated and when?
    Fire up System Preferences, click on the Software Update icon and then select the Installed Updates tab.
    3) Is there any other way to access log files that may have more information on the crashes that I've had lately?
    Console, which is in your Applications/Utilities folder.
    Kryten

  • Trouble with 4G and other issues after latest update.

    To whom it may concern,
    After the recent update I have been having the following problems:
    I lose 4G in many places where I was receiving great 4G access before.
    Battery life seems to have suffered a little, this may be due to 4G hunting.
    New software applications were installed like the Caller ID app, and flipboard. I hate when software is installed without my authorization and then cannot be removed. What year do we live in Verizon?
    I have heard on this and other forums that a factory reset does not resolve these issues but Verizon claims that it is the final resolution. We should not have to do a factory reset after an update. I understand that there are many variables to consider with all the apps out there but that is what testing is for. That is why we wait for updates from Verizon.
    I will attempt a factory reset to resolve my issues. If this does not resolve the issues I will be contacting Verizon about a refund for the 4G access that I am now being denied.
    Thanks
    AlphaDanger

        Hey AlphaDanger!
    The year is 2013 and I read you loud and clear on wanting to make sure your software operates smoothly on your GS3. So, let's make that happen.
    Right off the bat, thank you for the details as well as considering a hard reset. But, I'd like to make another recommendation if you have yet to do it. Instead, I'd suggest wiping the cache partition. To do this:
    1.) Power off your phone.
    2.) Simultaneously hold the volume up key, home key, and power key.
    3.) When it vibrates, release only the power key.
    4.) When you see the Android recovery menu, wipe cache partition using the volume down toggle and power key to select.
    5.) Then select "Reboot System Now".
    Please let us know how this goes.
    EvanO_VZW
    Follow us on Twitter @VZWSupport

  • Airport Extreme (Dualband) Issues after latest update

    So after the semi-recent 7.4.1 upgrades, I am having a persistent issue where my computer will drops its connection to my Airport Extreme Dualband for no reason. Most commonly, it happens after I have left the computer sitting overnight. After I come back, the computer will be connected to no networks, despite my network showing up as available. The computer is not on the move, and there are no signal issues. I am not totally positive which machine is responsible (i.e. if the computer is dropping the connection, or if the router is), but I was hoping to here whether anyone else is experiencing the problem.

    Spent 8 hours last night with same issues. All issues really started after the update. I had just bought the new dual band, set up was smooth, then all **** broke loose after the X.1 update. A couple of things I noticed. 1) Same issues you had that if the computers sat, it took a good 5 minutes to get the network up again or "see" it 2) I use comcast and I have noticed that the dynamic is causing issues between the AE and modem (post update) 3) Every time I try to change settings on the AE to add Guest network, the whole network crashes and I have to go to complete hard boot, reset AE and do power start all the way out. 4) Comcast rep had me power cycle all of my hard wire gigabit routers off the AE. I was having issues until I did this. Apparently the AE keeps IP if you feed routers off of it. Going to revert to 7.4 right now.

  • Battery Life / Recharging issues after latest Update

    I bought the Xperia Z2 beginning of April and it was fine. The battery lasted for about 2 days with Active Hotspot continuously running for approx. 18 hours. After updating to the latest software version, the phone runs pretty hot and with Active Hotspot on, while hardly using other programs, the battery is empty after 8 hours, despite having the phone always on the charger. Several times an error message pops up, telling that the phone consumes more power, then the (original) charger is providing! Is that update rather a downgrade? Or is it the intention to get the Hotspot literally hot?

    Hi there!! I've been using my Xperia z for the past one year. Till last week I didn't had any problem but now I'm not sure what happened to my mobile.. I have listed all the issues below. I really need your help and support to solve this issue and please get me a permanent fix..
    1. Battery is draining too fast(very fast)
    2. Mobile is always hot even if I don't use. When start using apps like game, browsing or watch any video, I feel that I'm holding an induction stove in my hand.
    3. "Throw" option is not working
    4. When I make a call I don't hear anything through earpiece rather I'm using loudspeaker speaker.
    Plzzz help me and get me a solution.. I'm afraid to take my mobile to service center.. Please advise what needs to be done..

  • Time sync issues after windows update

    Hi,
    After running a windows update on VM PDC controller server can't syncronize time with online pool (update took approx 10 minutes). Event log is showing error ID 50 (The time service detected a time difference of greater than 5000 milliseconds for 900 seconds)
    and time is off for 10 minutes which causes problems with Exchange and Lync services.
    According to event log there has been 4 succesful connections with NTP servers before event 50 appeared on log:
    The time service is now synchronizing the system time with the time source 1.uk.pool.ntp.org,0x1 (ntp.m|0x1|0.0.0.0:123->178.79.191.28:123).
    The time provider NtpClient is currently receiving valid time data from 2.uk.pool.ntp.org,0x1 (ntp.m|0x1|0.0.0.0:123->87.117.251.45:123).
    The time provider NtpClient is currently receiving valid time data from 3.uk.pool.ntp.org,0x1 (ntp.m|0x1|0.0.0.0:123->178.79.160.57:123).
    The time provider NtpClient is currently receiving valid time data from 1.uk.pool.ntp.org,0x1 (ntp.m|0x1|0.0.0.0:123->178.79.191.28:123).
    After running manual resync time is corrected, but it takes time to populate through domain computers without running gpupdate /force on each PC in domain.
    PS C:\Windows\system32> W32TM /query /status
    Leap Indicator: 0(no warning)
    Stratum: 4 (secondary reference - syncd by (S)NTP)
    Precision: -6 (15.625ms per tick)
    Root Delay: 0.0447998s
    Root Dispersion: 7.8017179s
    ReferenceId: 0x557750E8 (source IP:  85.119.80.232)
    Last Successful Sync Time: 12/06/2013 16:44:09
    Source: 0.uk.pool.ntp.org,0x1
    Poll Interval: 6 (64s)
    PS C:\Windows\system32> W32tm /query /configuration
    [Configuration]
    EventLogFlags: 2 (Local)
    AnnounceFlags: 5 (Local)
    TimeJumpAuditOffset: 28800 (Local)
    MinPollInterval: 6 (Local)
    MaxPollInterval: 10 (Local)
    MaxNegPhaseCorrection: 3600 (Local)
    MaxPosPhaseCorrection: 3600 (Local)
    MaxAllowedPhaseOffset: 300 (Local)
    FrequencyCorrectRate: 4 (Local)
    PollAdjustFactor: 5 (Local)
    LargePhaseOffset: 50000000 (Local)
    SpikeWatchPeriod: 900 (Local)
    LocalClockDispersion: 10 (Local)
    HoldPeriod: 5 (Local)
    PhaseCorrectRate: 7 (Local)
    UpdateInterval: 100 (Local)
    [TimeProviders]
    NtpClient (Local)
    DllName: C:\Windows\system32\w32time.DLL (Local)
    Enabled: 1 (Local)
    InputProvider: 1 (Local)
    AllowNonstandardModeCombinations: 1 (Local)
    ResolvePeerBackoffMinutes: 15 (Local)
    ResolvePeerBackoffMaxTimes: 7 (Local)
    CompatibilityFlags: 2147483648 (Local)
    EventLogFlags: 1 (Local)
    LargeSampleSkew: 3 (Local)
    SpecialPollInterval: 3600 (Local)
    Type: NTP (Local)
    NtpServer: 0.uk.pool.ntp.org,0x1 1.uk.pool.ntp.org,0x1 2.uk.pool.ntp.org,0x1 3.uk.pool.ntp.org,0x1 (Local)
    NtpServer (Local)
    DllName: C:\Windows\system32\w32time.DLL (Local)
    Enabled: 1 (Local)
    InputProvider: 0 (Local)
    AllowNonstandardModeCombinations: 1 (Local)
    VMICTimeProvider (Local)
    DllName: C:\Windows\System32\vmictimeprovider.dll (Local)
    Enabled: 1 (Local)
    InputProvider: 1 (Local)
    Server is not taking time from bare metal as it's running on Hyper-V and it seems that it's not syncing during startup correctly. Is there a possibility that there can be a config issue as it's working fine when reboot doesn't take too long?
    Regards,
    Marcin

    1. For sure, there in VM settings you have time synchronization from host unchecked.
    2. Network monitor will reveal what happens when you stop annd start Windown Time service and Systém Event log contains relevant data.
    M.

  • Nokia Lumia 920 issues after latest update. Fix in...

    Since the last update we are having massive problems on our Lumia 920 from ATT. Bad reception, losing Internet connection, etc.
    We have over 30 920 deployed in our company. We did tests with and without the new patch and its like day and night.
    Sitting in my office, i have 1-2 bars on the phone with updates, showing 4g, but cannot access any website.Plus constantly losing connection.
    On the phone without update I have 2-3 bars, showing LTE and constant internet access.
    It is horrible. We first thought it was related to the Access Point Software, but it is definitively the firmware.
    Please fix asap. Not good advertising for those awesome phones.

    This issue has already been covered on several threads on this forum. The update was found to cause issues on AT&T and was pulled part way through it's roll out. A fresh update is being prepared that fixes the issues. For more information contact AT&T or Nokia US.

  • Photo app syncing issues with latest updates

    Since installing the new OS X Yosemite 10.10.3  to iMac and ISO 8.3 to iPhone 5s and iPad3, not all of my photo albums and or photos in various albums are syncing..... any hints?? I also installed the latest iTunes 12.1.2.27 too ! I have rebooted all devices too....
    Thanks Schooner

    HI,
    Maybe try it this way this is what I did with mine because I did not migrate and didn't know about that either.
    Photos application for Mac Instructions that might help!
    On your iPad,iPhone keep the iCloud on in settings for Photos.
    if you have not opened the New Photos application yet to have it transfer your photos from iPhoto let it Transfer the Pictures.
    once you have all the pictures from iPhoto to Photos then in Photos go to Preferences
    there is general and iCloud tab and go to the iCloud and only uncheck the iCloud button that will make it so it doesn't sync with your iPhone and iPad for Photos.
    Then in Photos go up to View and press show sidebar because with that view you can move your pictures easier to albums snd delete or move any pictures or make new albums
    For Duplicates if you have a big pile in a row and I mean not like every other picture of the same pictures on the keyboard Hold down the shift button. or the other way is to Hold down the Command buttom that is right by the space bar then on the trackpad or mouse click once on the picture you want to delete and do a bunch at a time then on the last picture of that pile either right click the picture and delete or go up to the edit button which is next to file on the top left and click delete in edit. 
    when you are all done with moving around your pictures or whatever go back to Preferences and turn on iCloud and make sure you have the optimize Mac Storage and then you are done! I hope this makes sense and works for you! here are the 2 pictures I'm talking about in settings.

  • Syncing issues after new update 4.3.5

    I updated and synced my iphone to my computer last night and when I went to use my ipod toady it said you need to sync iphone to computer to play ipod.  When I did this it wont sync saying my device wont connect with the computer (error oxE8000001) I managed to get onto a screen that told me to restore the iphone to factory settings and when i clicked this it said it couldn't do it.  I updated and restarted the computer and restarted my iphone.  I dont know what to do now can anyone help.

    Hi,
    Disable anti virus software and turn off the firewall on your computer then try syncing.
    Carolyn

  • Weird Safari issues after latest update

    Opening Safari opens Firefox. And searching in Safari browser opens webpage in Firefox browser. I am unable to use Safari at all. Instead any command given in Safari triggers Firefox.

    Will it launch at all, please be a little more descriptive. Remember we are not there to see what you are doing. Also which version of OS X is installed? Your profile indicates you are on 10.8.2, the most up-to-date version is 10.8.4. You may need to download the 10.8.4 Update Combo and re-install. You can locate the Update Combo at:
    http://support.apple.com/kb/DL1659

  • Doc to go issue after ipad update ios 6.0 doc to go keeps dropping can't sync MacBook Pro

    Doc To Go issue after ipad update ios 6.0 doc to go keeps dropping can't sync MacBook Pro (15-inch Late 2011), Mac OS X (10.7.5), ipad iOS 6.0

    Post in the iPad forum, this one is for OSX

  • After latest updates cannot stream from iPad to AppleTV

    After latest updates on my New Ipad and Apple TV 2nd Generation, Canot stream video from the iPad to Apple TV.
    I Can Stream from my iMac and from MacBook Pro, but not from iPad.
    Any Advise?
    Thanks.

    Hey guys, unfortunately I've had to re-install Mountain Lion to get rid of the issue, but here's my experiences after trying many things and contacting AppleCare...
    First, I had Lion and had upgraded to ML. They had me go do the following with limited success:
    1) Reset PRAM (no effect)
    2) Recovery Disk and repair permissions (no effect)
    3) Went to system /Library and User /Library and basically we went through several attempts at removing various files from (/Library/InputMethods, /Library/LaunchAgents, /Library/LaunchDaemons") Once I had essentially removed every file and dragged it into the trash (without deleting), the issue was resolved. So, it seems to point to an application that was not fully supported or giving problems within the ML environment. The plan was to drag them one by one back and do reboot/shutdown until I could isolate the application, but rather than do that, I just did a fresh install to take out any variable that could be present from having to do a Lion/ML upgrade. I was able to put a fresh copy of ML on the computer through the Recovery partition after establishing connection to my router. Everything is working fine now.
    Anyway, hope that helps some of you. It was a frustrating experience but seems to point to application issues wih the OS and not the OS itself. I think developers are still rushing to catch up with full ML support and so you might find yourself having many new updates in drivers or applications over the next month.

Maybe you are looking for