Sync problems after upgrade to 3.0

upgraded to 3.0 now when I try to sync my 1g ipod touch I get message : Ipod cannot be synced unknown error 13019 occured :I now have no music or videos on my ipod, still in Itunes but all gone from ipod. can anyone help with this.

deselect all music and videos and re sync then select all music and videos and sync again... try that heard it works :P

Similar Messages

  • Cured a sync problem after upgrade 10.5.1.

    Since the update of OS X.5.1 and iTunes 7.6, I could no more sync :
    iSync crashed, dot mac sync event did not register again my macbook (I deleted all the machines registered from another mac), and I could not sync my iTouch via iTunes...
    This is solved now and described at http://discussions.apple.com/thread.jspa?threadID=1380833&tstart=0
    Hope this help.

    Will try installing OS X 10.5.1 again from the downkoad that you recommended. Won't be able to do this untill after the New Year but I'll let you know if this helped. I had another problem after he 10.5.1 upgrade and that was that the Security update 2007-009 also refused to install. Could this be related too the problems with Disk utility and the permissions problems.

  • Sync problems after upgrade to iTunes 9

    I've seen lots of posts on this but none that directly match my situation. Bought a few TV eps that required upgrade to iTunes v9 so I upgraded. Now only some of the shows will sync to my iPod. Following the sync I've noticed that it is now also removing TV shows that were previously on the iPod, and removing or not locating shows and videos within iTunes which have been there for awhile. These shows are still showing on the iPod though - the whole thing is a mess.
    I have a Dell Inspiron 8600 with extra memory and a Seagate 320g external drive that hold iTunes. The iPod is a 32g classic.
    Any hep would be appreciated.

    I have very similar symptoms after upgrade to iTunes 9.1. During sync of Calendars (or if Calendars disabled, during iPhone backup step), Outlook hangs & sync never completes. Outlook stays hung, and hangs again if I kill and restart, until I reboot. Hugely frustrating.

  • Calendar sync problem after upgrade to Snow leopard?

    I upgrade my iMac to Snow Leopard recently, since then I can not sync my calendar with mobile me account other item are syncing OK (contact, notes ..etc). How I can fix this?

    Do you have Calendars set to sync in System Preferences -> MobileMe -> Sync
    If you do then open up iCal and go to Preferences -> Accounts, check to see if an account is listed and if it is not then click the + in the bottom left and input the information.

  • Sync problems after upgrading to 3.0.1

    I upgraded yesterday to OS 3.0.1. I also deleted all my contacts from my Iphone. I then synced my contacts from Itunes. Out of the 181 contacts I have in my addressbook, only 33 contacts where synced to my Iphone! Why is that? SOS!! HELP!!!

    In iTunes... go to your Devices, select your iPhone then if you look at the top u will see different Tabs.... Select the Info tab.
    Under the Contacts section tick the 'Sync Address Book Contacts - All Contacts' box
    Hope this helps.

  • Strange Calendar sync problem after migrating to iOS5

    Hello all,
    I posted my problem as an "me too" reply to somebody else's thread but think it got a bit lost there.
    Since I can't solve this problem I decided to make a new thread.
    The problem:
    After upgrading my iPhone4 to iOS5 I have a strange calendar syncing issue such that existing entries from one calendar (I've got two, see below) are duplicated on the other .... but only on the iPhone, not on the calendar server (Lotus Notes) itself!
    As I couldn't find a normal solution to this problem (already removed the complete Lotus Notes traveler account from my iPhone and reinstalled it again, to no use: the duplicates pop up again) I finally decided to start removing the duplicate entries on my phone. To my surprise however they popup again!!!!!
    I added a new entry to the original calender to see whether that one would popup in the other as well but this didn't happen.
    It looks to me it must be something wrong on my iPhone as the "duplicates" do not show up in the calender database on the server (using Lotus Notes PC client) nor its replicas.
    The configuration:
    I sync with two calendars on my iPhone:
    - gmail calendar for my private
    - lotus notes server (traveler exchange) for my work.
    The gmail calender also syncs with my desktop client (outlook 2010) via a small application "gSyncit".
    This all worked like a charm on iOS4.
    No matter where I modified, deleted or added entries (not only calendar, also contacts and mail) it all stayed perfectly in sync!
    Does anybody out here noticed the same and/or has a solution to this?
    BTW: I haven't activated iCloud for the calendar/mail/contacts (yet) ...

    OK,
    I found out what was wrong myself.
    In the end it turned out that it had nothing to do with the iOS5 upgrade itself.
    In case somebody else stumbles accross this very same problem, here's what was going on:
    - Within the latest lotus notes client (on PC) the user has the possibility to display (read-only) external calendar contents (e.g. google's calendar).
    - When setting this up you need to supply your external calendar's login/password information and next to that
    - also have the possibility to select "View this calendar when offline or on a mobile device"
    It was this setting (which I probably accidentally enabled) causing the "issue". Deselecting this option made my duplicate entries disappear on my phone.

  • Syncing problems since upgrading to 10.5.7

    Ever since I performed the 10.5.7 upgrade with all the associated software updates I have been receiving a constant error message popping up whenever I plug in my iPhone:
    "The application AppleMobileDeviceHelper quit unexpectedly."
    It pops up constantly as long as my iPhone is plugged in and iTunes is open.
    I've also noticed that my calendar information is not syncing bi-directionally anymore, and have been having terrible problems with iTunes crashing whenever I try to perform a sync.
    Any ideas?

    I didn't have the problem after upgrading to 10.5.7, but I did have the problem after juggling my iTunes data. I had moved it to an external 500G drive to do some clean up but after a week or so I had it the way I wanted it and copied it back to my main disk. The problem started right after that.
    I called Apple and they told me to delete and reinstall iTunes and the mobile device helper. To be specific, I deleted the files:
    /Applications/iTunes.app,
    /System/Library/Extensions/AppleMobileDevice.kext, and
    /Library/Receipts/AppleMobileDeviceSupport.pkg
    I did not remove any preference files or any files other than those listed.
    After moving those files to the trash, reboot. When the system comes back up empty the trash. Download and reinstall iTunes.
    You should be good to go. At least it worked for me.

  • Problems after upgrade bios to v4.3 - P67A-GD65

    Hi to everybody,
    I was having a problems after upgrade bios to v4.3 of my mainboard P67A-GD65.
    After upgraded bios version (FW) its interface was changed and seemed better. also some specifiactions upgraded that i am now able to follow information of bios in my windows. with Control Center.
    1) first of all after bios upgrade XMP memory section can only be enable şf ş choose OC geniue on. but with this my cpu warm till 98C degree. because i have only stock cpu cooler of intel.
    in normal mode xmp can not be activated so that my memory that corsair vengeance dd3 1600mhz works at 1333mhz only.
    Also there was information about what is new in this version of bios fw as:
    - Enhanced PCI-E display card performance.
    - Improved memory compatibility.
    2) second problem that i have i wanted to turn cpu leds which were located above cpu slot blue leds. once i turn them off and it is ok. but when shutdown computer and restart it turn on itself.
    so may be there have benn occured a problem that mb can not save edited settings correctly?
    3) For last i could not find Winki 3 OS/linuz anywhere is there a link to it to integrate to my mb?
    Thanks for your replies from now on.
    Greetings.

    Quote from: momosala on 02-April-13, 17:54:22
    I think you had better to flash back to beta 4.39 bios, here : https://forum-en.msi.com/index.php?topic=164135.msg1214789#msg1214789
    And use and install on USB key MSI Forum HQ USB flashing tool from here : https://forum-en.msi.com/index.php?topic=108079.msg800577#msg800577
    Flash using method 1.
    And tell us if that works.
    thank you for reply that fast i will try asap and tell here.
    Btw, have you ever face a problem as i wrote above?

  • Problems after upgrade: Leopard to Leopard no longer works

    My sister upgraded to Leopard on her iMac(c2d) to Leopard yesterday. Earlier in the day we were able to do video chats with a number of people(her machine Tiger to Fathers machine Leopard). However, since upgrading, we've experienced weird behavior for video chats. Basically in her window she won't see her image(the small one), and I don't see her at all. We've tested this out with a number of other iChat accounts and get the same results. Btw, all machines that are chatting with her are using Leopard. Also, all other forms/capabilities work: screen sharing, sharing of pictures, audio chats.
    Anyone out there have similar problems after upgrading from Tiger to Leopard? I have done the usual adjustments of bandwidth and QT settings, as well as restarts. What else should I try?
    tia,
    n

    I finally resolved this problem: I think the issues/steps would be helpful for anyone who experiences iSight off or not working problems after upgrading to Leopard(then to 10.5.1) on a intel 20" iMac :
    Problem:
    -If you have an internal iSight on an iMac and your camera works fine in Tiger
    -If you upgrade to Leopard
    -If Chat camera doesn't show your image (iSight off) even though the green light is on
    -You can see the other persons video on iChat
    -Your friends can here you and you can share screens, files, etc.....everything but have them see you
    These are the initial steps I took:
    - Deleted the pLists(or stored preferences for the Application) described at the top of this thread
    - Was told it might be slow internet connection so did various things: disconnected other computers, changed wireless to "G" only
    - Specifically Opened of ports spec'd for Leopard on router (even though I hadn't needed to do this under Tiger)
    - Tried chats with various people on various fast/slow networks
    - Restarted all aspects of the network: router, wireless access point, computer
    - Checked to see if the iSight was shown in 'System Profiler'. It was found in 'About This Mac->More Info->System Profiler->USB'
    - Clicked Video icon in iChat Buddies window(to the right of your name) and coudn't see my image
    - Opened 'PhotoBooth' and coudn't see my image(black screen)
    - Opened iMovie and couldn't capture video via the iSight(black screen)
    - Opened iChat->Preferences->Video and couldn't see my image
    - Validated that 'Camera is Enabled' in iChat->Video->Camera is Enabled
    If you are experiencing a similar problem with you built-in iSight, I would probably focus on the last 5 things that I did. What they showed me was that the iSight was just not capturing video even though it was capturing sound in 3 different applications.
    The solution to iSight Off or iSight Not Responding or No Video is......reset your computer! I had thought my sister performed this but it turns out she hadn't. Here's the link to this procedure:
    http://docs.info.apple.com/article.html?artnum=303446
    Very easy to do though: Power off computer and unplug all cables, including power cable for at least 15 seconds. Plug everything back in and power up the computer and retry clicking on the 'Video' icon next to your login name. If you see yourself then...problem is solved.
    While I eventually found posts in several other forums, it took me the better part of a week. To try this simple step. I wish I had done so straight away. Oy. I guess I learned a lot about ports, speed etc.
    I hope this helps.

  • Problems after upgrading to iTunes version 6

    Hello,
    I've been going through the threads a lot since I have had problems after upgrading to iTunes v. 6. It looks like a lot of people have had the same issues, and I have tried some things that were recommended. After I upgraded, iTunes would not open. I tried:
    1. deleting sidb file
    2. doing the msconfig thing suggested in discussion boards
    3. going into safe mode and deleting 4 and 6 letter weird files in DOS - I found 3 that I deleted
    iTunes worked after this -- then I bought a song and it said my computer was not authorized, after I authorized computer (that never happened before), iTunes worked for about 15 more minutes and then closed down abruptly. I haven't been able to open it since.
    I also downloaded Spybot search & destroy and that did not find anything. I am using McAfee, and have scanned for viruses with McAfee and AdAware.
    Now, when I restart my computer, a bunch of windows pop up with Chinese/Japanese looking characters and say that device (I think) was not found. I seem to be able to use everything except iTunes and Quicktime. When I open the Task Manager, iPodService.exe and iTunesHelper.exe and qttask.exe are there, but when I click on Quicktime or iTunes the file flashes in Task Manager and then disappears.
    I'm not sure where to go from here.
    Any help would be apppreciated -- I'd like to be able to open iTunes!

    Hello,
    I used Nickroo's post:
    I was able to get iTunes launched (with the help of Tech Support) in a very unsafe environment. I owe it to those who may need this after me. It will get you going, but you will be extremely vulnerable to internet virus assaults. Please do not use this approach, until you have exhausted every other available solution for your issue in the KB.
    There are three Steps 1) Uninstall 2) Disble and 3) Reinstall.
    UNISTALL Uninstall iTunes using Windows utility Add Remove Program available in Control Panel.
    DISABLE Disable all third party System Services and Startup Items using using MSCONFIG utility as described in Service Document http://docs.info.apple.com/article.html?artnum=302538
    RE-INSTALL Re-install iTunes6 + QT7. Launch it under the Selective Startup Option.
    It worked ! You realize among other things at this point you have your Antivirus and Firewall disabled. When I started my computer in the Normal Startup Option, iTunes fails to work again. So I have ahead of me the long and ardous task of ruling out the service that is causing conflict with iTunes6. Then work with the software vendor to arrive at a solution.
    This seems to have worked so far- I haven't started to go through ruling out what made iTunes not work; I also haven't tried to connect my iPod or burn a CD, so we'll see.
    Windows XP

  • Permission problems after upgrade to 10.5 on early Power PC G5 Tower

    Permissions problems after upgrading to 10.5 on a client power PC (early) G5 tower.
    Problems include folders that are created on XServe via this client do not allow any one else including this client to access. All other clients running 10.5, which happen to be newer Intel machines do not have this problem. Repairing permissions, updating to 10.5.1, try to manually correct permissions have all failed to repair the situation. All clients log onto the XServe with the same user/password. This client has since been downgraded back to 10.4.9 and has no issues.
    The Xserve runs 10.3.9, any help would be greatly appreciated.
    We have read through the forums regarding permission problems after upgrading and even tried some tips found here.

    You really should check things out first before speaking.
    Here are the requirements for 10.5;
    Mac OS X v10.5 Leopard requires:
    A Mac computer with an Intel, PowerPC G5, or Power PC G4 (867 MHz or faster) processor
    512 MB memory or more
    A DVD drive for installation
    9 GB of available disk space or more
    Some features require a compatible Internet service provider, fees may apply.
    Some features require Apple's MobileMe service; fees apply.
    Allan

  • Layouts problem after upgrade

    Hello, I have a problem after upgrade from 2007 to 8.81 PL 05.
    Since we upgrade SAP, the layout changed.
    For example, in a credit note if it has 3 lines, in the layout will appear 2 lines in a page and 1 in other page.
    if the credit note has 4 lines, in the layout will appear 3 lines in a page and 1 in other page.
    What could it be?
    Thanks in advance.

    Hi!
    lines are not duplicated, they just printed on different pages:
    - if doc has just 2 lines  -  printed form is good
    - if doc has 3 items, two of them are printed on the first page, 3d - on the second page
    - if doc has 4 items, 3 of them are printed on the first page, 4th - on the second page
    When we are printing directly from the server everything is working fine. But printing from all Clients gives us this issue that is described above.
    SAP re-installation  for all users will take too much time. May be exist any other option that we can try?
    we really appreciate your help
    Natalia

  • Problem after upgrading to ICS 4.0.4

    i have different problem after upgrading my SE Live with Walkman to ICS 4.0. After upgrading, my sd card always full. I have try to remove some files but after that it full again. Finaly i found that there are tumbnail file with size precisely same with my empty space. I delete that file, but the empty space not recover, its only recover after unmounting sd card. But its not hold for long time, after one minutes its happen again, my sd card is back fully again, and the same file is back to exist. Please help me, is that a virus or bugs from ICS?? i very frustation with this case
    thanx for your help

    Do you have many pictures?
    Have your tried to reinstall the phone software using SUS to check if the problem remains?
    http://www.sonymobile.com/gb/tools/update-service/
     - Community Manager Sony Xperia Support Forum
    If you're new to our forums make sure that you have read our Discussion guidelines.
    If you want to get in touch with the local support team for your country please visit our contact page.

  • Several problems after upgrading to iO6

    My iphone is with multiple problems after upgrading to iOS 6. Applications are closing alone, the screen goes black and then back to the home screen. does not connect to internet (3G and Wi-Fi) connections as cutting. Throw another quick update to fix this, or do I have to change to the Galaxy SIII; Iphone is Terrible!!

    Try the Padma extension.
    *Padma: https://addons.mozilla.org/firefox/addon/padma/

  • Login problem after upgrade to mavericks

    Hi, i have login problem after upgrade from mountain lion to movericks in imac, I did enter the correct password But back to the login page again.

    Hi cpuman8,
    Thanks for visiting Apple Support Communities.
    If you're not able to log in to your user account after upgrading, try resetting your password using the method in this article:
    Resetting the original administrator account password
    In OS X Lion or later, you can reset your user password with your Apple ID.
    OS X: Changing or resetting an account password
    http://support.apple.com/kb/ht1274
    Best Regards,
    Jeremy

Maybe you are looking for