Sync tab not showing

When I click on Tools and Manage the Sync tab isn't shown.
I need to set up an account on the web server to upload an assignment for Uni.

make sure all the music you want to sync is check marked in itunes to do that, go to itunes, click music, edit, select all, right click, choose check all. if you only want some of your music to sync, create a new playlist with only that music you want and unclick everything but that particular playlist.

Similar Messages

Excise Item TAB not showing in MIRO

Hi Expert,
While doing Miro, Excise Item Tab not showing we have check the details Like Tax code, Chapter ID, and excise rate Material.
Kindly help me ,
Thanks
Pranav

Hi,
Please go to transaction code MIGO and check whether excise tax exists or not ? if yes, please click on and click on Miscellaneous tab
In case it is shown as In process we would not able to see excise details in MIRO.
Hope, this solves your issue else revert.
Regards,
Tejas

"retail" tab not showing while creating PO thru' ME21N in IS-Retail

"retail" tab not showing in item level while creating PO thru' ME21N in IS-Retail

Hi,
Go to SPRO > Materials Management > Purchasing > Purchase Order > Define Screen Layout at Document Level - Here for the field selection key "ME21N", under field selection group "Administrative data, item", mark following fields as optional ;
Prior vendor
Season
Reason for ordering
Revision level
And then check.

ITunes Store music tab not showing up

iTunes Store music tab not showing up

FollowUp - Problem Solved.
Just in case anyone else was experiencing the same issues, I pinpointed it down to a corrupted iTunes preference file - com.apple.iTunes.plist.
I created a new user account, lauched iTunes and it worked fine, no black drop down window appearing, so I went back into my account and deleted this and relaunched iTunes and the drop down window showed all the search results again, not the black window as seen in my example image.
Hope this helps others!

CIN TAB not showing

Hi all,
In XK01 transaction CIN tab not showing..
I feel its an authorization problem..
Can you solve??
Tonmoy.

doing a trace will tell you more on whether this is authorization-related.
if you are uncertain on how to interpret the trace, you can always copy it into this thread.

ICloud tab not showing open tabs

When I click iCloud tab in safari, it does not show open tabs on browser on pc. My pc browser is IE

Hello vera75,
Take a look at the requirements for icloud tabs outlined here iCloud: Using and troubleshooting iCloud Tabs http://support.apple.com/kb/ht5372.
System requirements for using iCloud Tabs
Make sure that:
Your Macs have OS X Mountain Lion and Safari 6 installed
Your iPhone, iPad, or iPod touch has iOS 6 installed
Keep in mind that while iCloud Tabs is only available for Macs with OS X Mountain Lion installed, and devices with iOS 6, you can still use normal iCloud Bookmarks to sync saved Bookmarks and Reading List content between any devices that meet the iCloud system requirements.
All the best,
Sterling

SOLUTION: tab not showing in ME21N/ME22N with badi ME_GUI_PO_CUST

Hi,
I implemented BADI's ME_GUI_PO_CUST and ME_PROCESS_PO_CUST to show a custom tab in the header section of ME21N, ME22N and ME23N.
But after implementing the BADI's, the tab showed up in ME23N, but not in ME21N and ME22N.
So I started looking for a solution in the SDN forum, and I saw that there were a LOT of people with the same problem, but nobody ever posted a solution.
So here is the solution:
So, I added the fields I wanted to show in the structure CI_EKKODB, implemented the BADI ME_GUI_PO_CUST (the methods SUBSCRIBE and MAP_DYNPRO_FIELDS), and the BADI ME_PROCESS_PO_CUST.
After that the tab showed up in ME23N, not in ME21N or ME22N.
So I found an SAP note saying the following:
Question:
I implemented the 'ME_GUI_PO_CUST' Business Add-In to display customer-
specific tab titles in the EnjoySAP purchase order. They are only shown in display mode (ME23N) however, not in create or change. Why?
Solution:
You may have forgotten to assign a field status to the user-defined fields on these tabs. As a result, the system automatically interprets the field status as 'hidden' in create and change modes. However if a tab contains only hidden fields, then the entire tab is set to hidden. In display mode, fields without a field status are automatically set to display. That is why the tab is displayed in this case.
To assign a field status to the user-defined fields, use the methods provided for this purpose in the Business Add-In 'ME_PROCESS_PO_CUST' (compare sample source code in the FIELDSELECTION_ITEM method).
So in my case, I had to add some code to the FIELDSELECTION_HEADER method of the BADI ME_PROCESS_PO_CUST.
This is the code:
method IF_EX_ME_PROCESS_PO_CUST~FIELDSELECTION_HEADER.
DATA: l_persistent TYPE mmpur_bool.
FIELD-SYMBOLS: <fs> LIKE LINE OF ch_fieldselection.
* if the item is already on the database, we disallow to change field badi_bsgru
l_persistent = im_header->is_persistent( ).
*   IF l_persistent EQ mmpur_yes.
    READ TABLE ch_fieldselection ASSIGNING <fs> WITH TABLE KEY metafield = mmmfd_cust_01.
    IF sy-subrc IS INITIAL.
      <fs>-fieldstatus = '*'. " Input
    ENDIF.
*   ENDIF.
endmethod.
But then, I realized that this BADI was never triggered. When I entered one of the transaction codes ME21N, ME22N or ME23N, the code in the fieldselection_header method was never executed.
So I went to transaction SE18, and entered ME_PROCESS_PO_CUST in 'Enhancement Spot' and pushed the button display.
And there in the tab 'Enhancement Implementations', I saw an implementation that was not mine, and that did not show up in the overview of the SE18 'BADI NAME' tab for the same BADI... which to me seems strange.
So as you may know, there can never be more than one active implementation of the BADI ME_PROCESS_PO_CUST.
So I disactivated my implementation and put my code in the existing implementation.
And after that it worked!

implement first badi :ZME_GUI_PO_CUST:
METHOD if_ex_me_gui_po_cust~subscribe.
DATA: ls_subscriber LIKE LINE OF re_subscribers.
* we want to add a customer subscreen on the item detail tab
   CHECK im_application = 'PO'.
   CHECK im_element     = 'HEADER'.
* each line in re_subscribers generates a subscreen. We add one subscreen in this example
   CLEAR re_subscribers[].
* the name is a unique identifier for the subscreen and defined in this class definition
   ls_subscriber-name = subscreen1.
* the dynpro number to use
   ls_subscriber-dynpro = '0001'.
* the program where the dynpro can be found
   ls_subscriber-program = 'SAPLMEPOBADIEX'.
* each subscreen needs his own DDIC-Structure
   ls_subscriber-struct_name = 'MEPO_BADI_STRUCT'.
* a label can be defined
   ls_subscriber-label = text-001.
* the position within the tabstrib can be defined
   ls_subscriber-position = 4.
* the height of the screen can be defined here. Currently we suport two screen sizes:
* value <= 7 a sevel line subscreen
* value > 7 a 16 line subscreen
   ls_subscriber-height = 7.
   APPEND ls_subscriber TO re_subscribers.
ENDMETHOD.
implement 2nd badi : ZME_PROCESS_PO_CUST:
method IF_EX_ME_PROCESS_PO_CUST~FIELDSELECTION_HEADER.
   DATA: l_persistent TYPE mmpur_bool.
   FIELD-SYMBOLS: <fs> LIKE LINE OF ch_fieldselection.
* if the item is already on the database, we disallow to change field badi_bsgru
   l_persistent = im_header->is_persistent( ).
*   IF l_persistent EQ mmpur_yes.
     READ TABLE ch_fieldselection ASSIGNING <fs> WITH TABLE KEY metafield = mmmfd_cust_01.
     IF sy-subrc IS INITIAL.
       <fs>-fieldstatus = '*'. " Input
     ENDIF.
*   ENDIF.
endmethod.

Partition Tab not showing in Disk Utility

Hello again everyone,
I'm attempting to partition my LaCie 2TB (RAID1) Disk in Disk Utility, however the partition tab is not showing up..
There are 4 items visible in the Disk Utility window:
1) the Internal OS Disk
2) the LaCie 2TB (RAID1) Disk
3) & 4) the two slices/partitions of the LaCie mirrored RAID
I select the 2TB LaCie RAID1 Disk, however it only shows the "First Aid" & "RAID" tabs.
The "Partition" (as well as "Erase" & "Restore") tabs are not available or shown.
When I select the Internal OS Disk all the Tabs are shown, and when the 2 slices or partitions of the RAID1 are selected it shows the "First Aid, Erase, Partition, Restore" tabs..
Am I missing a step here?? I know I'm not supposed to select the slices/partitions of the RAID, but instead to select the LaCie 2TB Disk itself, however this is the only option which does not show any "Partition" Tab..
Any assistance is GREATLY APPRECIATED.. Thank you!

Have you tried this:
Drive Preparation
1. Open Disk Utility in your Utilities folder.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to two. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Security button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
I'm sort of confused as to why you would partition a 3 GB drive into just a single 1 TB partition, but that's what I understood you to say. Is this 3 TB drive installed in an enclosure that actually supports a drive of that size? Older enclosures may not and should not be used.

With holding tax tab not showing up in MIRO

Hi,
Im trying to do a MIRO for a vendor which requires with holding tax. The setting in done in the vendor master.However while doing MIRO, the with holding tax tab does not show up.
Does anyone know why with holding tax tab is not showing up in MIRO and what needs to be done.
PS: It is set up correctly in the vendor master and it works and shows up while doing FI transactions.
Thanks

Hello Shruti,
Kindly check if on the vendor master, on withholding tax tab, checkbox "liable" has been ticked.
Also kindly check the reconciliation account defined in the vendor master and compared in GL master record, FS00, should have a field status group of G067- Reconciliation Accounts or its equivalent in case you don't use standard SAP field status grouping.
And also check on the MRIO screen, have you checked "calculate tax" under general tab.
Hope it will help you
Thanks
Para

Manually synced music not showing up under the artist

When I manually add songs to my iphone 4 from my iTunes library they are not showing up on my phone under when I go to the artist. Oddly, when I search for the song title the song will come up and it plays, and it shows the artist name correctly when it is playing. I updated both iTunes and the phone. I've done a reset. I've deleted the songs in question from the phone and then re-added them, only to have the same problem.
This problem doesn't happen with every song I add, but it always happens to the same songs. When I sync the phone, I can find them in the phone window of iTunes and they're there correctly sorted by artist (and play fine)! These songs are CD imports (not iTunes purchases). I have "manually manage music" on, and iCoud is off.
Thanks!

Are they marked as 'Part of a compilation' when you look at the song info on iTunes? This is quite common in some albums like soundtracks. If yes, then you'll probably find them under 'Various Artists' in the Artist section.
You can uncheck the compilation box if you wish, that should do the trick.

Notes syncing but not showing up in Outlook

I don't know if this is a topic somewhere, had a quick search couldnt find it.
I have an old version of Outlook (2000), which technically doesn't sync with the iPod touch (according to the apple site, 2003/2007 is required). now Outlook really misbehaves on my computer anyway but this isn't the issue.
I set it to sync anyway, just to see if it would, and it does seem to sync them. When I change Notes or make new ones, I get pop up messages when syncing, to ask if I want it to continue and overwrite them for example.
This morning I had to do a full restore, and it would appear that my Notes ARE somewhere on my Computer, because they have returned themselves to my iPod. yet i have no idea WHERE they are.
anyone know?

In Outlook 2007, Notes are accessible in the bottom left corner of the window, at the bottom of what's called the Navigation Pane, below the Folder List. You may already have tabs there for Mail, Calendar, Contacts, and Tasks. Initially, there is no Notes tab, but the Notes icon is placed at the bottom. Click on that, and it opens up a default note, and positions the Notes tab under the Tasks tab. All Notes are initiated here, and sync'd Notes from your iPod Touch and/or iPhone will be displayed there as well, arranged chronologically. At least, that's how it works in Outlook 2007.

Exchange 2003 Active Sync - Contacts not showing up on BB10

Hi Everyone, i am hoping someone can help. We have been assumig all along the problem was with our Exchange Server 2003 config and new informaiton has come to light that makes me believe now it is a device issue and I am hoping someone has seen this problem.
The core probllem is that contacts are not syncing propertly. They are syncing VERY slowly - it has been 7 Hours and only a hundred or so have moves over. The assumption was they werent copyng over, however new information has led us to potentially believe they are coming over but are being processed by the Z10 and not showing up in the contact list.
My unit is hooked up to my car on bluetooth and everytime i start my car - it copies over my contact list. I then noticed that there are contacts which have been copies over, which do NOT show up yet on my blackberry (but are in my exchange contacts) - so my car found the contact from the Z10 and now 3 hours later, that contact is still not in my BB Contacts. I know for sure that contact wasnt cahced in my car memory, as it is a new contact i created on my office computer only a few hours prior....
This is making me believe that the Z10 is processing the contacts in some way or the index on my BB contacts is bad.
What have I dont todate to resolve the issue:
- complete wipe and reload (3 times)
Today:
Removed the battery and restarted - numberous times
Interestingly, everytme i reboot the device, more contacts appear in my list??? Considering i have approx 800 contacts, this would only mean i have about 500 reboots left before my contacts are all there?
HELP

Hi Jjang,
To resolve this for you it would really help if we could gather logs and do some testing. Could you please ask your wireless service provider to open a case with BlackBerry on your behalf so we can look after this for you?
Thanks.
-FS
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.
Click Solution? for posts that have solved your issue(s)!

Access Tab not showing for item level security

I have enabled item level security for the portal page I am working on, but the access tab for the items is not showing.
I have come accross exactly the same problem on this forum and the advice was:
Hi try the following :
go to page properties
set the item level security
clear the cache
clear your browser cache
it should work "
I have tried all that, closed and opened a browser but the access tab is still not showing. This is a 10.1.4 portal on LINUX. Starnge enough I have a testing environment installed on my Windows XP (AS 10.2.0.2 not upgarded to 10.1.4) and I don't have any issues with item security access tab at all.
I would appreciate any clues.
Regards,
Anna

There should be two icons shown for each item when you put the page in Edit mode - Edit and Actions. Click on the Actions icon and "Access" should be one of the links in the list of actions (like hide, expire, delete, move, etc.)

Glossary Tab Not Showing Glossary terms in Microsoft HTML Help Output

When I generate Microsoft HTML output from my RoboHelp HTML project, the Glossary tab appears correctly showing the glossary terms after clicking the View Output button. However, when I double-click on the final Compiled HTML Output file from Windows Explorer, the Glossary tab only shows a gray area without any terms. Here's a screenshot of what appears when I click on this tab:
I have tried working with the Adobe engineers and they have not found a solution yet. Anyone able to help?

Hi there
Although the thread linked below isn't about the Glossary Tab, the cause is likely the same. So check out the thread and see if it addresses your issue.
http://forums.adobe.com/message/4292236#4292236
Cheers... Rick
Helpful and Handy Links
RoboHelp Wish Form/Bug Reporting Form
Begin learning RoboHelp HTML 7, 8 or 9 within the day!
Adobe Certified RoboHelp HTML Training
SorcerStone Blog
RoboHelp eBooks

Why is the 3d tab not showing on the top ribbon?

I just started a close for photoshop and they have on their top ribbon "3d" tab why does it not show on mine?

Good day!
What exactly are you talking about?
Is 3D available under Window > Workspace > …?
Regards,
Pfaffenbichler

Sync tab not showing

Similar Messages

Maybe you are looking for