Synchronization Policy Input Form versus Meta View Active Sync

In IdM 7.1, the Resources/ Active Sync Resource/ Edit Synchronization Policy provides options for �Input Form� under the Common Settings section. If the Active Sync application is enabled on the Meta View � Identity attributes page, the Input Form option on the Edit Synchronization Policy becomes disabled, and shows a statement ��MetaView will be used to handle detected changes for this resource��
I have logic to set IAPI.cancel based on certain conditions in my Synchronization Policy Input Form. Where does this type of logic go if Meta View is turned on for Active Sync?

Which Imput Form are you Selecting
Default User form or create user form.
I want to enter users into AD from IDM using Active Sync.

Similar Messages

Help Pls: how to assign a user form to a non active sync resource adapter

I need to implement a non active sync resource adapter, such as oracle database or RACF. When a user is assigned a resource by IdM, an account is created on that resource. I want to transform some attributes during the creation, such as pre-padding the accountId with a letter and zeros. My questions are:
1) I think attribute transformation should be accomplished by user form. is it correct? How do I assign the user form to the non active sync resource?
2) What workflow/userform should I change to accomplish that?
Thanks a lot.

A cleaner option would be to
1. Create a custom form, which could be derived from the Tabbed User Form.
2. Create a delegated admin, with account administrator capabilities at the minimum, and required controlled organization, and assign the above form to this delegated admin -- this is on the same page.
3. Use this form to create IDs on the specific resource.
Now in this custom form you could have the logic on how to create the ID in the specific resource. In fact you could have different logic for different resource. Check the tech deployment guide for the exact syntax, but the field might be:
account[Res_Name].identity
Note that this setting would override the 'Identity Template' setting as defined in the RA configuration.
And BTW, it would really help if you readup the 'Forms' section in the guide.
Regards,
Suveer Chainani

ActiveSync Input Form -- To take AD Resource name from Database column

Hi All,
My authorative source is a database table called dbTable.
I am using an input form to provision into Active Directory. The Active Directory resource name is stored in a dbTable column. I first tried to hardcode the name of AD and do the provisioning, it worked. But wen I tried to take the name of the AD from my dbTable column using
<Field name='waveset.resources'>
<Comments>Add the AD account user inducted.</Comments>
<Expansion>
<block trace='true'>
<filterdup>
<appendAll>
<ref>waveset.resources</ref>
<list>
<ref>activeSync.resourceNm</ref>
</list>
</appendAll>
</filterdup>
</block>
</Expansion>
<Disable>
<block trace='true'>
<neq>
<ref>feedOp</ref>
<s>create</s>
</neq>
</block>
</Disable>
</Field>
It didnt work.
Plz, can anyone tell me how to bring the name of the AD resource in my input form for provisioning into that AD.
I need help. Plz treat it as urgent coz i can't move further without this being solved.

Hello, first try to trace the value, using <ref>activeSync.resourceName</ref> should work,
also read the example in Identity Manager documentation (PDFs) called: "Example: Disabling Accounts through ActiveSync Capable Adapters"
Regards,
Edgar Torres

About Active Sync

I am using ActiveSync for Database Resource. In the TabbedUserForm I turn on the required property for the fields firstname and lastname, when the synchronization is executed failed.
2007-01-25T15:01:00.593-0500: tin_usuext: 1, codigoentidad: 2, identity: test8, tno_menu: menu1, codigointermediario: 34, codigociudad: 1, tin_impaut: 1, estado: B, fullname: dasds lkjsadjka, tno_perfil: 1, tin_habil: P
Validation errors detected in form.
Missing value for required field "First Name".
Missing value for required field "Last Name".
But, When firstname and lastname fields are not mandatory, the synchornization work.
What I can do??
thanks..

use a different form assigned to the active sync proxy admin then what is used for the standard tabbed user form.
if you map to those fields then you should not get the validation error.
the default tabbed form uses global.firstname....are you mapping to that value??
Dana Reed
AegisUSA
[email protected]

How do I grey a bubble on a line item that I don't want the user to be able to input, but leave the others active in a form?

How do I grey a bubble on a line item that I don't want the user to be able to input, but leave the others active in a form?

I may be missing something here, but can't you just set the item to "Read Only" in the general preferences for that item?

How to Create an Input Form using a Transient View Object?

I would like to use a Transient View Object to store data from input forms across a multiple-page enrollment process.
My question is how to I create the input form using the Transient View Object on the .jspx page? Do I drag/drop an ADF creation form onto the page? Or, use a regular ADF form? Do I need to create the initial row progammatically?
Just looking for some general directions or set of instructions? I've looked at the SRDemo example (Globals Transient View Object), but I'm not sure how they created the page at design time?
thanks

Well following the SRDemo example, this seems to work:
1. Create Transient View Object
2. Add to Application Module as a Data control
3. Add to .jspx page as an ADF Form (not as an ADF Create Form)
4. Add following code to Application Module containting Transient VO instance:
protected void prepareSession(Session session) {
super.prepareSession(session);
insertTransientViewObjRows();
private void insertTransientViewObjRows() {
ViewObject transientvo = getViewObj1();
transientvo.clearCache();
transientvo.insertRow(transientvo.createRow());
}

Active Sync vs Synchronization

Dear all,
Please help me...I'm a little bit lost :o)
IDM 7.0 tells me that the Active Sync process is deprecated => from now on, we have to use the synchronization process AND the Meta View.
Using the synchronization process...there is no way to configure (for example) a workflow (or rule) based on an event (create, update, etc.). When I use the Meta View (Meta View => Identity event) to configure these events (create, update), only three events are available by default: enable, disable and delete.
Do you know how to configure the create AND update events ?
I would like to manage these two events through the Active Sync process.
Thanks a lot in advance.

No
Meta-Directory is included in iDS Integration Edition 5.0
rgrds
Paulaner
"Aw Peng Soon" <[email protected]> wrote in message
news:9ltbks$[email protected]..
Hi,
does IDS5.0 support W2K synchronization for ADS(Active DirectoryService)?
as compared to NT4 PDC synchronization.
Aw Peng Soon
[email protected]
Tel: (+65)858-6789
Fax: (+65)487-4567
PGP key fingerprint = C3FD 07D0 6DA1 83DE DFD3 14EE 3581 6F98 81EA DD7A

How do I use Active Sync to view SharePoint Lists (Contacts and Calendars) on a Mobile Phone?

We are attempting to use SharePoint 2010 in combination with Exchange 2010 to implement shared calendars and contact lists throughout our organization. We are able to connect the lists to Outlook 2010, but have been unsuccessful in viewing
the calendars and contact lists from our mobile phones. How do we use Active Sync to view SharePoint Lists (Contacts and Calendars) on a Mobile Phone?
In trying to answer this question, we have come across a few different possibilities, all of them falling just short of a long term solution for us. After doing research, we found that Active Sync will only show the default folders of the account. To
solve this, we downloaded an Add-In for Outlook (CodeTwo FolderSync) to synchronize folders and synchronized our SharePoint list with a new Contact list in the default folder. The issue we came across with this method is that the Add-In we are using
is not capable of automatic synchronization. There is a button and it must be clicked after every update is made, which is not ideal for our solution. We then went to the company (CodeTwo) and found server side software (Exchange Sync) that they
offer which will automatically synchronize the folders. After installing that on the Exchange Server, we now are running into the issue of not being able to locate the SharePoint lists on the Exchange Server.
Does anyone happen to know how we can get to the SharePoint lists from the Exchange Server? Has anyone else been able to use shared contacts lists and calendars from SharePoint on their mobile phones using Active Sync? If so, are we in the right
direction with what we have found so far?
Thanks,
Brad

You cannot use ActiveSync for that, but there are SharePoint clients for the iPhone. Windows Mobile 7 natively supports SharePoint with SharePoint Workspace Mobile, part of Microsoft Office Mobile. Android and BlackBerry might also have some apps.
Use Microsoft SharePoint Workspace Mobile
http://www.microsoft.com/windowsphone/en-us/howto/wp7/office/use-office-sharepoint-workspace-mobile.aspx
iPhone SharePoint Apps Shootout
http://www.codeproject.com/KB/iPhone/iPhoneSharePointApps.aspx
Comparing SharePoint iPhone Apps
http://blog.praecipio.com/2010/11/02/comparing-sharepoint-iphone-apps/
MCTS: Messaging | MCSE: S+M

Open BI Publisher report using URL View activity

Hi,
i need to call BI Publisher report and I want to use URL View activity (i followed instruction on http://oraclebizint.wordpress.com/2007/07/30/customizing-obi-ee-%e2%80%93-go-url-parameters/ but i can't have HTML Form inside af:form)
But parameters on URL View activity are visible and i have to send username and pass..
Is there another way?
Tnx.
Andreja

Yes, I can put HTML form at top or bottom of page but i wanted to put in panelCollection (because of page design)....
but I will think out something to look nicely too :)
Tnx

Form on a view

Hello,
I created a view on a remote database. This view contains a calculated column. I created a tabular form based on the view. When I try to cheange and update a record I receive the following message:
Error Unable to process update.
Error in mru internal routine: ORA-20001: Error in MRU: row= 1, ORA-20001: ORA-20001: Current version of data in database has changed since user initiated update process. current checksum = "DCB52C5A42FDFE11B8ECB36A0AFC9CB5", item checksum = "17BB996EFA972A345ED87CA7B0EC1450"., update "DEVELOPER"."SALARY_VU" set "ONGOING" = :b1, "NAMEV" = :b2, "SALARYV" = :b3, "PROVISIONV" = :b4
Changing and updating the records in the view by using isql*plus isn't a problem.
Adding a record isn't possible either. However, deleting a record succeeds.
A form based on a similar view without a calculated column works without problems.
Any ideas?
James

I created a simple view on a table (local, remote) doesn't metter. Then I created a form on this view. Updating the view through a form is not an issue. I can even use the calculated columns in the form. They need to be set on "display only". And it works now.
I didn't use any instead of trigger. The only trigger you need is the trigger for updating the primary key on the source table which uses an existing sequence.
James

SAP BPC 10 - Error on Refreshing Reports Input Forms

Hi all,
We are working on an BPC 10 Consolidation project for the Netweaver Version.
We setup the Environment, Dimensions, Models, etc. We created a few reports too using the Excel interface.
These were tested and they worked well.
However, then one day we started getting this message, whenever we opened any Report or Input Form -
"The Report that was defined is invalid - at least one of the axis contains no members."
We observed that this message appeared when there was no data available for EPM Context (Current View) given.
In short -
- The data is pulled out in the report, where for a CV there is data available.
- However, if the CV is changed to something which has no data available, the report does not go blank (i.e. does not get refreshed) and it keeps showing the old figures.
We tried opening reports in the SAP delivered IFRS Starter Kit too but got the same message.
We are not able to locate what went wrong. Did we change any option by mistake.
If anybody has faced this message and got it resolved or has an idea why this message might be appearing, please reply.
Any help would be highly appreciated!
Thanks!
Rajneesh

Hi Rajneesh,
Check whether you have both the row-axis and column-axis of the input template through 'edit report'.
Probably your input template has some member dimensions missing in your template.
We have faced the same problem before and corrected it.
This error occurs sometimes when we create a input template by clearing defining the row & column axis in the template but afterwards try some EPMOlapmember in any axis by deleting the original report elements.
So check the input template once again. I think you will track the error.
Regards,
Bishwajit

Dynamic input form in ADF

Hi,
i need to create an input form in ADF, which contains radio groups ,check boxes ,LOV's and text boxes as form fields.
these form fields i need to configure in DB specifying the type of the UI component(LOV,Text fields or Radio or check box)
by reading the type, UI component has to be rendered and validations should be fired dynamically.
is it possible in ADF?
Thanks
Indu

ADF Faces offers a library of dynamic components that includes dynamic form and
dynamic table widgets that you can drop from the Data Controls panel. Dynamic
components differ from standard components in that all the binding metadata is
created at runtime. This dynamic building of the bindings allows you set display
information using control hints on a view object instead of configuring the information
in the Edit Form Fields dialog as you drop the control onto the page. Then if you want
to change how the data displays, you need only change it on the view object, and all
dynamic components bound to that view object will change their display accordingly.
With standard components, if you want to change any display attributes (such as the
order or grouping of the attributes) you would need to change each page on which the
data is displayed.

Interactive form in a view for displaying pdf

Hi
I am getting this error when deploy and run an application with an interactive form in a view. I need to get the pdf in the interactive form. can anyone help me.
com.sap.tc.webdynpro.services.sal.core.DispatcherException: Wrong Web Dynpro URL: "../WebDynpro/Servlet/<deployableObject>/<application>/xx?..". xx is not allowed without exchange key. Retrieved URI path: /local/Case/Employee/@acf_empty.

<b>Hi
Please Check This for Adobe Requirements in Web Dynpro Applications
To be able to use PDF forms in Web Dynproapplications:
1.SAPNetWeaverDeveloper Studio(minimum SPS 11) is installed
2.Adobe LiveCycleDesigner7.0 is installed
3.Adobe Reader7.0.x is installed
4.SAP NetWeaverWeb AS Javacompatible with the DevStudiois installed
5.The Adobe Document Servicesare deployed and configured on the SAP J2EE Engine.
6.The Active Component Framework(ACF) of the Interactive Forms integration is installed. (not mandatory)
7.Internet Explorer(version 6)
Check this links.
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/2b6db1c4-0801-0010-faa5-ff4b4df55b45
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/63f09fc2-0401-0010-1482-dbf9891e7613
/thread/104121 [original link is broken]
Regards
Chandran</b>

Make an input form in pdk-struts

Hi
I have an application that uses ADF BC4J as model and jsp as view. One of the pages has an master/detail input from.
I have installed struts-pdk and I can build and deploy simple text pages, which are visible as portlets in the portal. Linking between these pages, within the application also works.
How can I make an input form(either using struts-pdk or something else!) in the portal???
And how do I combine the input form to my existing ADF model???

You need to start with a table in a sheet that has some columns with headers Once you create a new tab you can then create an input form for the table. This is in Numbers for iOS, not Mac OS X.

EPMExecuteAPI error in excel input form

Hello expert,
I'd like to add an EPMExecuteAPI link in an Excel input form, but I get an error in the cell :
#Error - Unexpected Error. Check your parameters.
Here is the formula I set in the cell :
=EPMExecuteAPI("DataManagerOpenViewStatusDialog";"View status")
I also try
=EPMExecuteAPI("DataManagerOpenViewStatusDialog()";"View status")
According to the online PDF help this function is compatible with EPMExecuteAPI.
I also find this string :
Application.Run "EPMExecuteAPI", "DataManagerRunPackage", "", "Import", "Packages", ""
Is it supposed to be used in a VBA macro and called from a button ? (right clic on the button and affect macro)
My goal is to provide few functionalities through links or buttons in the sheet.
Thanks for your help.
G.
No ideas ?
Thanks
Edited by: Société T-Systems on Feb 8, 2012 11:31 AM

Hi all,
I did not already solved my issue.
As I say functions with no parameters works fine, like
=EPMExecuteAPI("DataManagerOpenViewStatusDialog";"View packages Status")
or
=EPMExecuteAPI("SaveAndRefreshWorksheetData";"Save")
but this particular one don't work :
=EPMExecuteAPI("DataManagerRunPackage";"Run Allocation";"BS_Allocation,Financial Process,Public")
I believe that the function is understood by excel since the cell displayed content is "Run Allocation", there is no #error message in the cell.
When I double click in the cell like for other working function, I just go editing the function string (with another function the action is performed)
So help is still welcome on this post
Regards

Synchronization Policy Input Form versus Meta View Active Sync

Similar Messages

Maybe you are looking for