Synchronous Service Interfaces

Dear All,
I am getting a some strange issue when transported the Synchronous Service Interface from Dev to Quality system ,the interface automatically has changed to Asynchronous Service interface.
I saw some issue on Production system also when transported.
Can you please give me some hints on this?
Thank you very much.
Best Regards,
Sateesh

Hi Sateesh,
I can say activated object cache may be having asynchronous interface. When you transported that object might have transported to Qal and Prod.
Lets see other experts comments who has faced this kind problem.
Regards,
Krupa

Similar Messages

Using Enhanced Receiver Determination with a Synchronous Service Interface

Hi Experts,
I want to use ERD on a Synchronous Interface. Is that possible? Perhaps it has no sense, because in an ERD you can choice multiple receivers and that its against the synchronous philosophy: what if you declare 2 or more receivers, from wich one has the right response to be taken?
In technical terms I build the operation mapping as it is written both in the blog (/people/venkataramanan.parameswaran/blog/2006/03/17/illustration-of-enhanced-receiver-determination--sp16) and the SAP HELP.
But in my OM I have as source service interface one Abstract Synchronous and in the target I have one Abstract Asynchronous wich is not possible. So I tried many tricks like creating my own synchronous ReceiverDetermination Service Interface in my SWC, but it is not detected. Other trick will be modifying the standart SI, but it will affect the next guy trying to use ERD with an Asynchronous interface
The point its that it is a little funny that the receiver determination allows using ERD with a synchronous SI wich makes me think that it will be possible...
Is it possible to use ERD with a Synchronous Interface?
Regards
Gonzalo

i have seen Enhanced RD with lookups that work. Have to say it was not a RFC lookup used but rather a DB look in one of the implementations i had worked with. But still I really dont think a RFC lookup should be an issue.
Troubleshoot the lookup mapping to be working other than in the enhanced RD (i.e independently) .
if you head no where, i suggest opening a OSS note.

Synchronous interface without Service Interface and Mapping

Hi all,
Short and simple question: Is it possible to set up a synchronous interface without using Service Interfaces and (Operation and Message) Mapping?
In my case I would like to create an interface with a SOAP and File adapter.
Cheers,
Mac

Hi Mac,
>>Short and simple question: Is it possible to set up a synchronous interface without using Service Interfaces and (Operation and Message) Mapping?
Yes possible provided you have both Sync adapter as sender and receiver. For eg: Soap sender --> PI --> HTTP adapter
>>In my case I would like to create an interface with a SOAP and File adapter.
Sync scenario using File adapter as receiver is not possible. Because File adapter works asynchronously.
Regards
Suraj

Implementing SingleThradModel interface and synchronizing service

Hi all,
I came across the one question.
What is difference between the implementing SingleThradModel interface and synchronizing service method in the Servlet?
Which one is the better one? and why?
It seems to be same for me... but still confused?
Please explain me.
Thanks,
Rahul

No one is better. Just write threadsafe code. E.g. do not declare instance variables which are to be used per request. Just keep in mind that only one instance of the Servlet will be created which lives as long as the webapplication runs and that it will be reused among all requests. Keep request scoped variables inside the method block and you're safe.

Mapping in Services Interface with multiple operation... ?

Hi ALL,
I have a SOAP to SOAP scenario here Just PI 7.1 with EHP1 acting a bus no mapping nothing .
1) I have the WSDL file from the receiver system with multiple synchronous operations in it ..i imported the wsdl as External Definition .. i used the same the WSDL file to create the sender Service interface also...
when i created the service interface with the operation in it , i just gave the same operation name from the WSDL.this i followed for the sender and receiver service interface.
1)now the issue is do i need any operation mapping if the service interface has more than one operation ...?
2) I compelted the scenario without any operation mapping ..but i am getting this error ..Problem occurred in receiver agreement for sender -ICRM_D to receiver -EXACTTGETWEBSERVICE_D,http://ICRMtoExactTaetWebservice.com.si_os_ICRM_EXACTTETWEBSERVICE: No standard agreement found for , ICRM_D, , EXACTTARGEBSERVICE_D, http://ICRMtoExactarebservice.com, si_os_ICRM_EXACGETWEBSERVICE..?
pls help me in this issue..
Thanks
Souz

you might want to read this /people/shabarish.vijayakumar/blog/2010/09/08/service-interface-and-multiple-operations--is-it-just-an-hype
you will need to create additional configurations for multiple operations to be supported

Not getting Service interface in receiver side

Hi,
I am working on a newly configured PI server.
Here, I am working on a synchronous SOAP to RFC scenario from third party to ISU.
From the Display WSDL option of ID I have created a wsdl file and testing the scenario by importing wsdl file into SOAP UI. When I am sending some request from SOAP UI , I am getting proper response message ; that's mean interface is working fine and properly hitting the RFC in ISU.
I can see the message in SXMB_MONI of my PI server . But I am not getting the message in SXMB_MONI of ISU server . Even in SXMB_MONI of ISU I am not getting the inbound service interface also .
What can be the possible reason . As I am working on a totally new server should I do any configuration in the server to get the SI in receiver side.
Please help.
Thanks in advance.

Hi,
Please check if Sync logging is enable in ISU. refer the below blog
XI: I cannot see some of my messages in the SXMB_MONI
regareds,
Harish

Provider proxy error - Service Interface with multiple operations

Hello experts,
I've a synchronous provider proxy scenario using an inbound and outbound service interface.
That service interface contains 3 operations: create, change and delete a table entry.
I created all the necessary repository objects and integration scenario objects.
Next, I generated a provider proxy on the ECC backend system and created an endpoint via SOAMANAGER.
When I test, I get this error:
No implementing class registered for the interface (ABAP interface, request message ...., request message, namespace....)
I currently use a receiver XI adapter in the scenario. Is that ok?
or should I use a receiver SOAP adapter with a SOAP action?
Please advise.
Thanks a lot.
Dimitri

Hi,
Check these
INTERFACE_REGISTRATION_ERROR:No implementing class reg'd for interface
No implementing class registered for the interface
Regards
Seshagiri

Difference between Asynchronous and synchronous service (BPMN Process).

When we create new BPM process jdeveloper gives 4 options including Asy and synchronous service.
i want to know how they differ logically because both templates look same!!!!

In an Async process the start node is exposed as 'one way', so if you see the wsdl for this (port type section) , you will see only inputs and not outputs. This means the caller doesn't wait for the process to end. In a Sync process, the web service interface to the start node is 'two way', request/response....so you will see both and input and output in the port type section. the caller will wait for the response from the process.

'owspe:PolicyAccess' error while invoking ADF BC Service Interface

Hi,
   I have deployed a custom ADF BC Service Interface application to a standalone weblogic server. On invoking the service interface i get the following error in response.
<env:Envelope
xmlns:env="http://schemas.xmlsoap.org/soap/envelope/">
<env:Header/>
<env:Body>
<env:Fault
    xmlns:owspe="http://schemas.oracle.com/ws/policy-enforcement-2007-06">
   <faultcode>owspe:PolicyAccess</faultcode>
   <faultstring>PolicySet Invalid: WSM-02557 oracle.wsm.policymanager.accessor.BeanAccessor The documents required to configure the Oracle Web Services Manager runtime have not been retrieved from the Policy Manager application (wsm-pm), possibly because the application is not running or has not been deployed in the environment. The query "&(@appliesTo~="WS-Service()")(policysets:global/%)" is queued for later retrieval. </faultstring>
   <faultactor/>
</env:Fault>
</env:Body>
</env:Envelope>
I have deployed the same .ear file to my local weblogic server and got no error while invoking the WS.
Please suggest if any configuration needs to be done at weblogic server or to the ADF application.
Regards,
Himanshu

Hi Timo,
           No Luck.. Still getting same error. My ADF BC Custom Service Interface deployed on integrated weblogic server works fine.When i deploy the same EAR to Standalone weblogic server then i'm getting following error on invoking WS method.
<env:Envelope
xmlns:env="http://schemas.xmlsoap.org/soap/envelope/">
<env:Header/>
<env:Body>
<env:Fault
    xmlns:owspe="http://schemas.oracle.com/ws/policy-enforcement-2007-06">
   <faultcode>owspe:PolicyAccess</faultcode>
   <faultstring>PolicySet Invalid: WSM-02557 oracle.wsm.policymanager.accessor.BeanAccessor The documents required to configure the Oracle Web Services Manager runtime have not been retrieved from the Policy Manager application (wsm-pm), possibly because the application is not running or has not been deployed in the environment. The query "&(@appliesTo~="WS-Service()")(policysets:global/%)" is queued for later retrieval. WSM-02557 oracle.wsm.policymanager.accessor.BeanAccessor The documents required to configure the Oracle Web Services Manager runtime have not been retrieved from the Policy Manager application (wsm-pm), possibly because the application is not running or has not been deployed in the environment. The query "/policies/oracle/wss_http_token_service_policy" is queued for later retrieval. </faultstring>
   <faultactor/>
</env:Fault>
</env:Body>
</env:Envelope>
Could it be related to some Security: Roles or policies ?
Regards,
Himanshu

Regarding creation of service interface in PI7.0

Hi friends,
If i try to create a service interface in PI7.10 it shhows error like
<b>You cannot create new objects in component CCBPM, 1.0 of sap.com because no original language is defined for the components</b>
how can i solve this issue,plz help me out regarding this.
Thanks & Regards,
saran
Message was edited by:
Srinivasa D Rao

Hi...
Tools------> Personal settings.
Set the logon and original language to English and try...
I hope it will work...
Regards
San
Remember to set the thread to solved when you have received a solution there is a Way.

PI 7.1 "stateless" service interfaces prerequisites and limitations

are there any prerequisites and limitations for "stateless" Service interfaces.
We are directly implementing PI 7.1, (i.e not upgrading form 7.0 or 3.0).
so for all our service interfaces, shall we safely use tne interface pattern "statelss" instead of "Stateless(xi 3.0 compatible)".
if use the "stateless", are there any addition prerequisites or constraints/limitations.
can we use abap proxies, java proxies, providing webservices via xi, and consuming other webserivces in xi, all adapters, asynch, synch scenarios with "stateless" interface patterns.
In short, are there any things that can be done using "Stateless(xi 3.0 compatible)" and cannot be done using "stateless" interface
are there any specific requirements for using "Stateless(xi 3.0 compatible)" even in newly implemented PI 7.1
thanks in advance,
Madhu.

When it is an upgrade from 7.0 to 7.1 the default Interface pattern is Stateless (XI 30 Compatible)
Using Stateless Interface Patterns wont cause any harm/ restriction on any of the development.
The only twist will be in the way a condition is specified in the Receiver Determination.
For any Interface pattern (other than Stateless(XI30 Compatible)) you wont be able to see the message structure in the Condition Editor of Receiver Determination. All other functionality (Async, Sync, Proxy) will be available.
In such a case Condition should be specified as shown in this blog: /people/abhishek.salvi/blog/2009/07/15/sap-pi71-receiver-determination-xpath-and-you
Regards,
Abhishek.

Service Interface: How to create an SDO graph with tow Objects

Hi,
I want to create a Web service interface on top of my application module. Using the Service Interface I select the app mod, service methods and view objects from the data model. My data model consists of a master detail relationship. The Web service should provide an interface that uses a master and its details as parameters in an operation.
For example a customer and his credit cards. A GET-Operation should return a data structure that groups all objects.
I do not know how I can configure such a web service.
How can I achieve such a web service?
Do I have to code a service method and what is the return type of the method?
Can I work with existing VOs?
Do I need 'special' preconditions like a composition between master and detail?
Any idea?
Thanks,
Markus

Hi Scott
Bad news. I read several time this thread, but I have not found error in my program ... .
And I can not see what are really doing APIs of APEX.
Time is going - so we have make a decision now.
Probably (as I have no more answers at this forum) - we can not use APEX (as nobody using APEX sessions as I asked),
as we can not manage its sessions programmatically (too risky).
Thanks for your answer.
Andres

Service interface not listed in business system in ID.

Hi Experts,
In my QA system service interfaces are not listed in business system in ID, i have added product and SWCV in SLD and i am still unable to see the service interfaces of SWCV that i have added. i have done SLD and CPA cache refresh, restarted the QA system but still unable to resolve the issue.
Please suggest how to resolve this issue.

Hi Venu,
i have done SLD and CPA cache refresh, restarted the QA system but still unable to resolve the issue.
Try if "Compare from SLD" works? This can be accessed by going to ID -> double-click business system -> communication component -> adapter specific identifiers
Regards,
Mark

Failure in SDOSerializer.deserialize - Invoking AMImpl's Service Interface

Hi,
I have a typical Issue while invoking a Service Interface creation using ADF BC.
Steps done:
1. I generated the service interface using AMImpl.
2. Modified the WSDL to include soap headers.
<wsdl:input>
<soap:body use="literal"/>
*<soap:header message="tns:getTransactionHeader"*
part="transaction" use="literal"/>
</wsdl:input>
<wsdl:output>
<soap:body use="literal"/>
*<soap:header message="tns:getTransactionHeader"*
part="transaction" use="literal"/>
</wsdl:output>
3. Modified the Service classes (Service.java and ServiceImpl.java) to include the holders for the soap headers.
Now the method looks like this in the Service.java class:
List<SellingDayCalendar> getXYZ(@WebParam(mode = WebParam.Mode.IN,
name="unitName")
String unitName, @WebParam(mode = WebParam.Mode.IN, name="salesDate")
Timestamp salesDate, *@WebParam(name = "transactionHeaderType", mode = WebParam.Mode.INOUT,*
targetNamespace =
*"/com/gm/vstar/model/core/common/",*
header = true, partName = "transaction")
Holder<TransactionHeaderType> transaction
) throws ServiceException;
4. I have created the POJO class called TransactionHeaderType.java which implements Serializable interface.
While I run the service by including headers or try to invoke the proxy from my JSF page, I get the following exception:
Target URL -- http://localhost:7101/MyServicesApplication-MyServicesModel-context-root/MyService
<ServerMessages> <severeMessage> oracle.webservices.provider.ProviderException: oracle.j2ee.ws.common.databinding.common.spi.DatabindingException: Failure in SDOSerializer.deserialize.
     at oracle.j2ee.ws.server.jaxws.JAXWSRuntimeDelegate.processMessage(JAXWSRuntimeDelegate.java:494)
     at oracle.j2ee.ws.server.provider.ProviderProcessor.doEndpointProcessing(ProviderProcessor.java:1187)
     at oracle.j2ee.ws.server.WebServiceProcessor.invokeEndpointImplementation(WebServiceProcessor.java:1081)
     at oracle.j2ee.ws.server.provider.ProviderProcessor.doRequestProcessing(ProviderProcessor.java:581)
     at oracle.j2ee.ws.server.WebServiceProcessor.processRequest(WebServiceProcessor.java:232)
     at oracle.j2ee.ws.server.WebServiceProcessor.doService(WebServiceProcessor.java:192)
     at oracle.j2ee.ws.server.WebServiceServlet.doPost(WebServiceServlet.java:459)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:727)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
     at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
     at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
     at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
     at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.jbo.server.svc.ServiceContextFilter.doFilter(ServiceContextFilter.java:78)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:111)
     at java.security.AccessController.doPrivileged(Native Method)
     at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:313)
     at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:413)
     at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:94)
     at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:161)
     at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:136)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.wrapRun(WebAppServletContext.java:3715)
     at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3681)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
     at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
     at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2277)
     at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2183)
     at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1454)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:207)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:176)
Caused by: oracle.j2ee.ws.common.databinding.common.spi.DatabindingException: Failure in SDOSerializer.deserialize.
     at oracle.j2ee.ws.common.databinding.runtime.sdo.SDOSerializer.deserialize(SDOSerializer.java:383)
     at oracle.j2ee.ws.common.jaxws.runtime.SoapInvocationSerializer.deserialize(SoapInvocationSerializer.java:298)
     at oracle.j2ee.ws.server.jaxws.SoapEndpointSerializer.deserializeRequest(SoapEndpointSerializer.java:86)
     at oracle.j2ee.ws.server.jaxws.ServiceEndpointRuntime.processMessage(ServiceEndpointRuntime.java:320)
     at oracle.j2ee.ws.server.jaxws.ServiceEndpointRuntime.processMessage(ServiceEndpointRuntime.java:196)
     at oracle.j2ee.ws.server.jaxws.JAXWSRuntimeDelegate.processMessage(JAXWSRuntimeDelegate.java:479)
     ... 34 more
Caused by: oracle.j2ee.ws.common.databinding.common.spi.DatabindingException: Deserialization failure. Invalid data type: com.gm.vstar.model.core.common.TransactionHeaderType
     at oracle.j2ee.ws.common.databinding.runtime.sdo.SDOSerializer.deserializePrimitives(SDOSerializer.java:520)
     at oracle.j2ee.ws.common.databinding.runtime.sdo.SDOSerializer.deserializePart(SDOSerializer.java:470)
     at oracle.j2ee.ws.common.databinding.runtime.sdo.SDOSerializer.deserializeNewPart(SDOSerializer.java:432)
     at oracle.j2ee.ws.common.databinding.runtime.sdo.SDOSerializer.deserialize(SDOSerializer.java:362)
     ... 39 more
<ServerMessages> <severeMsgServletException> An error occurred for port: {com/gm/vstar/model/utility/service/applicationmodule/common/}MyServiceSoapHttpPort: oracle.webservices.provider.ProviderException: oracle.j2ee.ws.common.databinding.common.spi.DatabindingException: Failure in SDOSerializer.deserialize..
Any solutions would be appreciated.
Thanks,
Ajith

Hi,
its JDeveloper and ADF on this forum. For EM related questions, you should try the EM forum
Frank

MS Word Web Service Interface: bad format of date and currency fields

Hi,
I am using MS Word Web Service interface to create contract documents. However, my date and currency fields show in a strange format. Date is in"YYYY-MM-DD" format, while currencies always have "." as decimal separator (probably technical values). My user settings are "DD.MM.YYYY" for dates and "n.nnn,dd" for decimal numbers.
My workaround is to create a Z structure for WS interface with char fields and then do conversion through CRM_WST_RT_BADI->OUTBOUND_PROCESSING method. This works, but requires a lot of custom development.
Is there a way to "tell" the interface to use correct formats in MS Word without doing it all manually through custom fields?
Thanks!
KR,
Igor

Oh, indeed!
We might be closer than you think - I live close to Croatian-Slovenian border so we might pop out for a drink! But we can discuss this out of forum...
Now work again:
Is there any documentation on possible formatting keywords? I suppose it's possible to set up decimal places, custom date formats etc.
Cheers,
Igor

Synchronous Service Interfaces

Similar Messages

Maybe you are looking for