Syncing my iPad is taking more than 36 hours... how do I speed this upso I can update my iOS?
syncing my iPad is taking more than 36 hours... how do I speed this up so I can update my iOS?
Try restarting the iPad. Disconnect the iPad first.
Press and hold the On/Off Sleep/Wake button until the red slider appears. Slide your finger across the slider to turn off iPod touch. To turn iPod touch back on, press and hold the On/Off Sleep/Wake button until the Apple logo appears.
Restart your PC.
Try again.
Similar Messages
-
Can you sync an iPad 2 to more than one computer.
I got a new ipad2. Can I sync it with my Mac at my house and also on my pc at work
You can authorize more than one computer with iTunes, but you have to maintain your iTunes library on one machine. Otherwise, you'll have a syncing nightmare. So, it's not advisable to sync to more than one computer as you'll be in a situation where you'll lose data from one machine to the next. Come this fall when iOS 5 is released, you won't need to sync with a computer at all. For the time being, I recommend you limit syncs to one computer.........
-
Sync and Create project operation from DTR is taking more than one hour
Hi All.
Recently basis team has implemented the track for ESS/MSS application.So When we import the track to NWDS its showing 500 Dcs.
I have successfully done the Sync and create project operation from DTR for 150 DCS and its take 5 min per Dcs.
However after that when i am trying to sync Dc or create project DC from DTR the operation is taking more than 3 hour per DC.Which should not be the case because for rest 150 DC that i ahve done Sync operation adn Create project operation from DTR it hardly takes 5 min per Dc.As this operataion is taking so much time finally i have close the NWDS to stop this operation.
I am using NWDS 2.0.15 and EP7.0 portal SP15 and NWDI is 7.0
Can any body tell how to solve this issue so that i can Sync and Create project from DTR for a DC within 5 min?
Thanks
SusmitaHi Susmita,
If the DCs are fine in CBS build, then I feel there is no need to test all of them locally in NWDS.
You can verify some certain applications in these DCs, then you sync & create project for these DCs & test run these applications.
As I get you only need to check ( no changes will be done ), yes you can verify them in small groups (say 20-25 DCs/group) in different workspaces so that no workspace is overloaded.
But why do you want to keep a copy of them locally as you are not making any changes, you can Unsync & Remove these projects once verified & use the same workspace to work on the next set of DCs.
Hope this clarifies your concerns.
Kind Regards,
Nitin
Edited by: Nitin Jain on Apr 23, 2009 1:55 PM -
XMLSerialize taking more than 10 hours to execute in Oracle
Hi All,
In my current project, converting oracle query into xml format first and then using XMLSerialize for printing but while execution it is taking more than 15 hours and more.
The basic oracle query taking hardly 10 second to execute and converting from oracle query to xml format taking around 1 min but when i am using XMLSerialize with order by clause it is not executing.
Can some help for fixing this performance issue causing due to XMLSerialize
Thanks in advance.
after adding the below clause performance issue started
select XMLSerialize(CONTENT rec_str as CLOB) as test_XML, 100 + rnum as ORDER_CLAUSE from xxtemp
Edited by: redrose1405 on May 1, 2012 12:45 AMHow much free space do you have on your boot drive?
OT -
My iphone4 is taking more than 5 hours to erase all the data still it is under process , still how much more time i have to wait for my mobile to ON ?
I'm having this EXACT same problem with my iPhone 4, and I have the same computer stats (I have a Samsung Series 7)
-
I have been trying to restore and back up my Iphone which i have just updated and I wanted my apps, contacts, messages,etc,. all back on my iPhone but its taking more than 45 hours and it's only 16 GB. I have really important contacts that I need to have in my phone but it would take weeks to get them back one by one without using the back up.
As has been said, you may have a corrupt backup on your computer. However, if it is a Windows computer you may also have a corrupt socket layer in Windows. So first try this (after canceling the backup):
Open a command window with Administrator privileges and type:
netsh winsock reset
then reboot your computer and try again to do a backup (right click on the phone's name in iTunes and select Backup from the floating menu).
If this doesn't work you will have to delete the existing backup. Go to iTunes preferences, Devices page.
Note: If you have a Mac first try restarting it, launching iTunes, and back up as described above. -
Query taking more than 1/2 hour for 80 million rows in fact table
Hi All,
I am stuck in this query as it it taking more than 35 mins to execute for 80 million rows. My SLA is less than 30 mins for 160 million rows i.e. double the number.
Below is the query and the Execution Plan.
SELECT txn_id AS txn_id,
acntng_entry_src AS txn_src,
f.hrarchy_dmn_id AS hrarchy_dmn_id,
f.prduct_dmn_id AS prduct_dmn_id,
f.pstng_crncy_id AS pstng_crncy_id,
f.acntng_entry_typ AS acntng_entry_typ,
MIN (d.date_value) AS min_val_dt,
GREATEST (MAX (d.date_value),
LEAST ('07-Feb-2009', d.fin_year_end_dt))
AS max_val_dt
FROM Position_Fact f, Date_Dimension d
WHERE f.val_dt_dmn_id = d.date_dmn_id
GROUP BY txn_id,
acntng_entry_src,
f.hrarchy_dmn_id,
f.prduct_dmn_id,
f.pstng_crncy_id,
f.acntng_entry_typ,
d.fin_year_end_dt
Execution Plan is as:
11 HASH JOIN Cost: 914,089 Bytes: 3,698,035,872 Cardinality: 77,042,414
9 TABLE ACCESS FULL TABLE Date_Dimension Cost: 29 Bytes: 94,960 Cardinality: 4,748
10 TABLE ACCESS FULL TABLE Position_Fact Cost: 913,693 Bytes: 2,157,187,592 Cardinality: 77,042,414
Kindly suggest, how to make it faster.
Regards,
SidThe above is just a part of the query that is taking the maximum time.
Kindly find the entire query and the plan as follows:
WITH MIN_MX_DT
AS
( SELECT
TXN_ID AS TXN_ID,
ACNTNG_ENTRY_SRC AS TXN_SRC,
F.HRARCHY_DMN_ID AS HRARCHY_DMN_ID,
F.PRDUCT_DMN_ID AS PRDUCT_DMN_ID,
F.PSTNG_CRNCY_ID AS PSTNG_CRNCY_ID,
F.ACNTNG_ENTRY_TYP AS ACNTNG_ENTRY_TYP,
MIN (D.DATE_VALUE) AS MIN_VAL_DT,
GREATEST (MAX (D.DATE_VALUE), LEAST (:B1, D.FIN_YEAR_END_DT))
AS MAX_VAL_DT
FROM
proj_PSTNG_FCT F, proj_DATE_DMN D
WHERE
F.VAL_DT_DMN_ID = D.DATE_DMN_ID
GROUP BY
TXN_ID,
ACNTNG_ENTRY_SRC,
F.HRARCHY_DMN_ID,
F.PRDUCT_DMN_ID,
F.PSTNG_CRNCY_ID,
F.ACNTNG_ENTRY_TYP,
D.FIN_YEAR_END_DT),
SLCT_RCRDS
AS (
SELECT
M.TXN_ID,
M.TXN_SRC,
M.HRARCHY_DMN_ID,
M.PRDUCT_DMN_ID,
M.PSTNG_CRNCY_ID,
M.ACNTNG_ENTRY_TYP,
D.DATE_VALUE AS VAL_DT,
D.DATE_DMN_ID,
D.FIN_WEEK_NUM AS FIN_WEEK_NUM,
D.FIN_YEAR_STRT AS FIN_YEAR_STRT,
D.FIN_YEAR_END AS FIN_YEAR_END
FROM
MIN_MX_DT M, proj_DATE_DMN D
WHERE
D.HOLIDAY_IND = 0
AND D.DATE_VALUE >= MIN_VAL_DT
AND D.DATE_VALUE <= MAX_VAL_DT),
DLY_HDRS
AS (
SELECT
S.TXN_ID AS TXN_ID,
S.TXN_SRC AS TXN_SRC,
S.DATE_DMN_ID AS VAL_DT_DMN_ID,
S.HRARCHY_DMN_ID AS HRARCHY_DMN_ID,
S.PRDUCT_DMN_ID AS PRDUCT_DMN_ID,
S.PSTNG_CRNCY_ID AS PSTNG_CRNCY_ID,
SUM
DECODE
PNL_TYP_NM,
:B5, DECODE (NVL (F.PSTNG_TYP, :B2),
:B2, NVL (F.PSTNG_AMNT, 0) * (-1),
NVL (F.PSTNG_AMNT, 0)),
0))
AS MTM_AMT,
NVL (
LAG (
SUM (
DECODE (
PNL_TYP_NM,
:B5, DECODE (NVL (F.PSTNG_TYP, :B2),
:B2, NVL (F.PSTNG_AMNT, 0) * (-1),
NVL (F.PSTNG_AMNT, 0)),
0)))
OVER (
PARTITION BY S.TXN_ID,
S.TXN_SRC,
S.HRARCHY_DMN_ID,
S.PRDUCT_DMN_ID,
S.PSTNG_CRNCY_ID
ORDER BY S.VAL_DT),
0)
AS YSTDY_MTM,
SUM (
DECODE (
PNL_TYP_NM,
:B4, DECODE (NVL (F.PSTNG_TYP, :B2),
:B2, NVL (F.PSTNG_AMNT, 0) * (-1),
NVL (F.PSTNG_AMNT, 0)),
0))
AS CASH_AMT,
SUM (
DECODE (
PNL_TYP_NM,
:B3, DECODE (NVL (F.PSTNG_TYP, :B2),
:B2, NVL (F.PSTNG_AMNT, 0) * (-1),
NVL (F.PSTNG_AMNT, 0)),
0))
AS PAY_REC_AMT,
S.VAL_DT,
S.FIN_WEEK_NUM,
S.FIN_YEAR_STRT,
S.FIN_YEAR_END,
NVL (TRUNC (F.REVSN_DT), S.VAL_DT) AS REVSN_DT,
S.ACNTNG_ENTRY_TYP AS ACNTNG_ENTRY_TYP
FROM
SLCT_RCRDS S,
proj_PSTNG_FCT F,
proj_ACNT_DMN AD,
proj_PNL_TYP_DMN PTD
WHERE
S.TXN_ID = F.TXN_ID(+)
AND S.TXN_SRC = F.ACNTNG_ENTRY_SRC(+)
AND S.HRARCHY_DMN_ID = F.HRARCHY_DMN_ID(+)
AND S.PRDUCT_DMN_ID = F.PRDUCT_DMN_ID(+)
AND S.PSTNG_CRNCY_ID = F.PSTNG_CRNCY_ID(+)
AND S.DATE_DMN_ID = F.VAL_DT_DMN_ID(+)
AND S.ACNTNG_ENTRY_TYP = F.ACNTNG_ENTRY_TYP(+)
AND SUBSTR (AD.ACNT_NUM, 0, 1) IN (1, 2, 3)
AND NVL (F.ACNT_DMN_ID, 1) = AD.ACNT_DMN_ID
AND NVL (F.PNL_TYP_DMN_ID, 1) = PTD.PNL_TYP_DMN_ID
GROUP BY
S.TXN_ID,
S.TXN_SRC,
S.DATE_DMN_ID,
S.HRARCHY_DMN_ID,
S.PRDUCT_DMN_ID,
S.PSTNG_CRNCY_ID,
S.VAL_DT,
S.FIN_WEEK_NUM,
S.FIN_YEAR_STRT,
S.FIN_YEAR_END,
TRUNC (F.REVSN_DT),
S.ACNTNG_ENTRY_TYP,
F.TXN_ID)
SELECT
D.TXN_ID,
D.VAL_DT_DMN_ID,
D.REVSN_DT,
D.TXN_SRC,
D.HRARCHY_DMN_ID,
D.PRDUCT_DMN_ID,
D.PSTNG_CRNCY_ID,
D.YSTDY_MTM,
D.MTM_AMT,
D.CASH_AMT,
D.PAY_REC_AMT,
MTM_AMT + CASH_AMT + PAY_REC_AMT AS DLY_PNL,
SUM (
MTM_AMT + CASH_AMT + PAY_REC_AMT)
OVER (
PARTITION BY D.TXN_ID,
D.TXN_SRC,
D.HRARCHY_DMN_ID,
D.PRDUCT_DMN_ID,
D.PSTNG_CRNCY_ID,
D.FIN_WEEK_NUM || D.FIN_YEAR_STRT || D.FIN_YEAR_END
ORDER BY D.VAL_DT)
AS WTD_PNL,
SUM (
MTM_AMT + CASH_AMT + PAY_REC_AMT)
OVER (
PARTITION BY D.TXN_ID,
D.TXN_SRC,
D.HRARCHY_DMN_ID,
D.PRDUCT_DMN_ID,
D.PSTNG_CRNCY_ID,
D.FIN_YEAR_STRT || D.FIN_YEAR_END
ORDER BY D.VAL_DT)
AS YTD_PNL,
D.ACNTNG_ENTRY_TYP AS ACNTNG_PSTNG_TYP,
'EOD ETL' AS CRTD_BY,
SYSTIMESTAMP AS CRTN_DT,
NULL AS MDFD_BY,
NULL AS MDFCTN_DT
FROM
DLY_HDRS D
Plan
SELECT STATEMENT ALL_ROWSCost: 11,950,256 Bytes: 3,369,680,886 Cardinality: 7,854,734
25 WINDOW SORT Cost: 11,950,256 Bytes: 3,369,680,886 Cardinality: 7,854,734
24 WINDOW SORT Cost: 11,950,256 Bytes: 3,369,680,886 Cardinality: 7,854,734
23 VIEW Cost: 10,519,225 Bytes: 3,369,680,886 Cardinality: 7,854,734
22 WINDOW BUFFER Cost: 10,519,225 Bytes: 997,551,218 Cardinality: 7,854,734
21 SORT GROUP BY Cost: 10,519,225 Bytes: 997,551,218 Cardinality: 7,854,734
20 HASH JOIN Cost: 10,296,285 Bytes: 997,551,218 Cardinality: 7,854,734
1 TABLE ACCESS FULL TABLE proj_PNL_TYP_DMN Cost: 3 Bytes: 45 Cardinality: 5
19 HASH JOIN Cost: 10,296,173 Bytes: 2,695,349,628 Cardinality: 22,841,946
5 VIEW VIEW index$_join$_007 Cost: 3 Bytes: 84 Cardinality: 7
4 HASH JOIN
2 INDEX FAST FULL SCAN INDEX (UNIQUE) proj_ACNT_DMN_PK Cost: 1 Bytes: 84 Cardinality: 7
3 INDEX FAST FULL SCAN INDEX (UNIQUE) proj_ACNT_DMN_UNQ Cost: 1 Bytes: 84 Cardinality: 7
18 HASH JOIN RIGHT OUTER Cost: 10,293,077 Bytes: 68,925,225,244 Cardinality: 650,237,974
6 TABLE ACCESS FULL TABLE proj_PSTNG_FCT Cost: 913,986 Bytes: 4,545,502,426 Cardinality: 77,042,414
17 VIEW Cost: 7,300,017 Bytes: 30,561,184,778 Cardinality: 650,237,974
16 MERGE JOIN Cost: 7,300,017 Bytes: 230,184,242,796 Cardinality: 650,237,974
8 SORT JOIN Cost: 30 Bytes: 87,776 Cardinality: 3,376
7 TABLE ACCESS FULL TABLE proj_DATE_DMN Cost: 29 Bytes: 87,776 Cardinality: 3,376
15 FILTER
14 SORT JOIN Cost: 7,238,488 Bytes: 25,269,911,792 Cardinality: 77,042,414
13 VIEW Cost: 1,835,219 Bytes: 25,269,911,792 Cardinality: 77,042,414
12 SORT GROUP BY Cost: 1,835,219 Bytes: 3,698,035,872 Cardinality: 77,042,414
11 HASH JOIN Cost: 914,089 Bytes: 3,698,035,872 Cardinality: 77,042,414
9 TABLE ACCESS FULL TABLE proj_DATE_DMN Cost: 29 Bytes: 94,960 Cardinality: 4,748
10 TABLE ACCESS FULL TABLE proj_PSTNG_FCT Cost: 913,693 Bytes: 2,157,187,592 Cardinality: 77,042,414 -
Cancelling disc burn taking more than half-an-hour
I had just burned a cd before trying to burn another one but that wouldn't finish. The one before it took less than two minutes while this next one was taking more than ten. I decided to cancel it but now it is still on the cancelling sequence and I cannot get the cd out. Any advice?
Given that it's so new, and what you've already tried, it sounds like an issue that requires service.
You can arrange online service here.
Service request. -
Syncing will change more than 5% of your calendars on this computer
Hi all,
I'm new to iPhone, but very familiar with Mac. When I attempt to sync my iPhone to my calendars in iTunes I get the message that syncing "will change more than 5% of the calendars on this computer."
What's this mean?
I always hit cancel because I don't want to lose any calendar info on my Mac.
I'm attempting to sync 9 or 10 iCal calendars.
I'm sure this has been well covered in these forums, but I'm able to find my answer.
Thanks!What's this mean?
Basically you have more or newer info on one side of the syncing devices.
Click on Details when you get this message and you'll see the entries that differ on the phone based calendars. One solution could be to set up your calendar on your computer as desired and replace the calendar info on the phone during the next sync. Click the option in the info pane/ advanced section in itunes with your phone connected. -
Hi Friends,
SELECT
DATEPART(YEAR, SaleDate) AS [PrevYear],
DATENAME(MONTH, SaleDate) AS [PrevMonth],
SaleDate as SaleDate,
Sum(Amount) as PrevAmount
FROM TableA A
WHERE SaleDate >= DATEADD(yy, DATEDIFF(yy, 0, GETDATE()) - 1, 0)
AND SaleDate <= DATEADD(dd, -1, DATEADD(yy, DATEDIFF(yy, 0, GETDATE()), 0))
-----'2013-12-31 00:00:00.000'
GROUP BY
SaleDate
This Query taking more than 2 min to pull the results .... basically I was passing last year first date and last date (should derive based on getdate())
if I pass static values like this WHERE SaleDate >= ''2013-01-01 00:00:00.000''
AND SaleDate <= '2013-12-31 00:00:00.000'
then it is pulling results in fraction of seconds.....
Note: I was keeping this code in View I have to use only View ( I know we can write store procedure for this but I dont want sp I need only View)
any idea please how to improve my view performance?
Thanks,
RKDo you have an index on SaleDate column ? If so , is this NCI or CI? How much data does it return? Can you show an execution plan of the query?
Best Regards,Uri Dimant SQL Server MVP,
http://sqlblog.com/blogs/uri_dimant/
MS SQL optimization: MS SQL Development and Optimization
MS SQL Consulting:
Large scale of database and data cleansing
Remote DBA Services:
Improves MS SQL Database Performance
SQL Server Integration Services:
Business Intelligence -
Data Load taking more than 24 hrs
Hi All,
We are in the process of loading the data from R3 to BW. Its taking more than 24hrs to load 1 yr data. This is because of complexity of ABAP code its taking this much time. We did all the possible ways to improve the performance of the code. But no luck.
In case if the same thing happened in the production system, then how should I forward with the data load as its taking more than 24 hrs for 1 yr data.
I m Planning to load int with out data transfer 1st and then Full load.
Please correct if I m wrong.
Thanks,
RS.Hi,
where is your ABAP code complexity loacted? in R/3 or in BW?
Are you talking about loading in empty cube taking long time? extraction time?
Analyze the different steps in your monitor and tell us where is the bottleneck;
If you already know the above and you have performed all the tunings (e.g. number range buffereing when filling an empty cube...) then you're correct; init without data and then full loads.
As suggested you could segment your full loads and even run them in paralel...
hope this helps...
Olivier. -
While using Status for Object button it is taking more than 15 mins to open
Hi Gurus,
We are trying to attach documents to ZBOS & OR types sales documents , while opening the Status for Object button of the sales order it is taking more than 15 mins to open , once it is opened it is working as normal.
can you please let us know is it the system functionality because of which it is taking so much time to open or the problem is with something else.
please let us also know whether it is system impacting process.
We are using 4.6C.
Thank You,
Boyeni.Hi Syed ,
Greetings!!!...
Thank you very much for your Swift response!.
could you be so kind to let me know The Program that needs to be refreshed.
Thank You once again for your Assistance.
Boyeni. -
The screen is frozen while installing software updates. Say about 2 minutes and it has been more than hour. How can I cancel or do something about it? Is it ok to unplugg it? Please advise.
Really?
Is there no other option? No magic key combo that brings up a secret menu?
My imac just froze during a software update install and I too do not know what to do. -
I ried to reset my iphone its taking more than 12 hrs still going on,
i tried to reset my iphone its taking more than 12 hrs still going on,How much ususally it takes to rest the i-phone.
yes it is quite normal, simply dont worry.
-
Problems with failover which is taking more than 5 min
Hi,
I'm new to Weblogic world and facing some problems in failover.
I have plugin configuration as below.
In the httpd.conf file
# Configure Performance settings
Timeout 45
ListenBacklog 1000
KeepAlive On
MaxKeepAliveRequests 0
KeepAliveTimeout 15
<IfModule mpm_winnt.c>
ThreadLimit 500
ServerLimit 6
StartServers 2
MaxClients 3000
MinSpareThreads 500
MaxSpareThreads 3000
ThreadsPerChild 500
MaxRequestsPerChild 0
</IfModule>
# EnableMMAP off
# EnableSendfile off
# Configure DoS Settings
# Max Body size in HTTP Request of 100Mb
# Max HTTP headers set to 50
# Max HTTP header size to 8Kb
LimitRequestLine 8190
LimitRequestFields 50
LimitRequestFieldSize 8096
LimitRequestBody 104857600
RLimitCPU 300 300
RLimitMem 8192000 8192000
#RLimitNPROC 20 20
# EnableMMAP off
# EnableSendfile off
this Configuration is in Weblogic plugin as we have seperate the configuration and included this in the httpd.conf
<IfModule mod_weblogic.c>
WebLogicCluster ********************************
KeepAliveEnabled ON
KeepAliveSecs 30
CookieName PSJSESSION_ID
DebugConfigInfo ON
WLIOTimeoutSecs 4000
# Debug ALL
# WLLogFile /u01/PWCapache/logs/staging-orbit-emea.pwcinternal.com/wlproxy_http.log
</IfModule>
Asuming 01 & 02
We stopped one side of the weblogic server(01) and tried the failovering, requests are going to the 02 side absolutely fine but still the plugin is sending the requests to the 01 side and its taking more than 5 min to route to available (02 which is up).
My thoughts are to reduce the WLIOTimeoutSecs 4000 to 300 value... and introduce DynamicServerList value(at the moment this value is not set not sure how the apache behaves if this value is not set any suggestion on this pls?)
as well as to introduce ConnectTimeoutSecs (10)& ConnectRetrySecs(2)
Could somebody please point to the solution for this?
Edited by: user2659864 on 14-Dec-2010 01:55Hi,
If you are completely shutting down the server-01 then once the server-02 sends the response back to the proxy then it would have the fresh list of which servers are running properly, hence if still the proxy is sending the request to the server-01 then this mean that the Apache process have not shared the dynamic server list with the other process or it seems to be a bug in the WLS plugin.
Suggestion try to use the latest WLS plugin and see if you can solve this issue as most of the time it would not be a an issue with WLS plugin.
And if you are suspending the server-01 then the below link would give you a better idea on it as how things works.
Topic: 404 error with Apache and Suspended Weblogic managed server
http://middlewaremagic.com/weblogic/?p=4567
Secondly by default the value of "WLIOTimeoutSecs " is 300 seconds so if you don't give this value then it would take 300 seconds which goes with "Idempotent" value which is by default "on", hence if the server is not able to send the response then it would fail over the second server after waiting 300 sec . Thus if you decrease the value of "WLIOTimeoutSecs " it would help you in case. More information can be seen below.
Topic: General Parameters for Web Server Plug-Ins
http://download.oracle.com/docs/cd/E12840_01/wls/docs103/plugins/plugin_params.html#wp1143055
Hope that would answer all your questions :)
Regards,
Ravish Mody
http://middlewaremagic.com/weblogic/
Come, Join Us and Experience The Magic…
Maybe you are looking for
-
Product search is not working in other JSP inj b2c application
hi, I had one requirement that we have to bring product search from header jsp(b2c/navigationbar.inc.jsp) to CategoriesB2C.inc.jsp. i had copied all related code from last jsp.but search is not working. i had modified only jsp.just guide me do we hav
-
Input a string and assign to a variable in the console window
i'm absolutely and completely new to java i need to be able to input a string and then assign it to a variable, entirely using the console window, basically i'm looking for the Java alternative to C++'s "cin" i've tried the System.in. method but noth
-
my ipod touch is saying Enter Passcode. I have never setup a Passcode on it. It will not let me into the device. Can anyone instruct me as what to do or where I can find information on the problem.
-
Flash Player Crashes In Internet Explorer 8&9 While Playing HD YouTube Video
Has anyone else came across this issue? While on YouTube if you try to play a video in HD, it'll play for a second and then crash. This only happens in Internet Explorer. Any suggestions would be helpful. I have tried many things and this is driving
-
IPhone wont re- start after updating
Hi whilst trying to update my iPhone 4 to iso6 my phone went flat. So i updated an iPhone 4S that i had never really used much . Now when i turn my IPhone 4 on it keeps showing me a symbol, telling me to plug in to iTunes then tells me it cant find