Cancelling disc burn taking more than half-an-hour

I had just burned a cd before trying to burn another one but that wouldn't finish. The one before it took less than two minutes while this next one was taking more than ten. I decided to cancel it but now it is still on the cancelling sequence and I cannot get the cd out. Any advice?

Given that it's so new, and what you've already tried, it sounds like an issue that requires service.
You can arrange online service here.
Service request.

Similar Messages

I have a 16GB san disc that when more than half full and trying to download to my Mac gives a "communication error" message. How can I seamlessly upgrade the computers software to handle SDHC cards of this size?

I have a 16GB San Disc that when more than half full and trying to transfer the images to the iPhoto library I get the message "communication error". How can I update my computers software to be SDHC compatable? I can buy a card reader but thought an update to the software would fix this problem.
Thank you for any solutions or advice.

KRDHarris-
I am not familiar with Flickr, but found their support page at <Flickr Support>. You may get better help there than here. I get the impression that the App is somewhat buggy.
The iTunes preview page indicates the App is for iPad as well as the iPhone. <Flickr App Preview>
Fred

Suddenly, time machine is very slow. Used to take up a minute and now more than half an hour. Does anybody know how this can happen? Indexing the back-up disk is off, but Timde Machine keeps on indexing!

Suddenly, time machine is very slow. Used to take up a minute and now more than half an hour. Does anybody know how this can happen? Indexing the back-up disk is off, but Timde Machine keeps on indexing!

same issue here...

Query taking more than 1/2 hour for 80 million rows in fact table

Hi All,
I am stuck in this query as it it taking more than 35 mins to execute for 80 million rows. My SLA is less than 30 mins for 160 million rows i.e. double the number.
Below is the query and the Execution Plan.
SELECT txn_id AS txn_id,
acntng_entry_src AS txn_src,
f.hrarchy_dmn_id AS hrarchy_dmn_id,
f.prduct_dmn_id AS prduct_dmn_id,
f.pstng_crncy_id AS pstng_crncy_id,
f.acntng_entry_typ AS acntng_entry_typ,
MIN (d.date_value) AS min_val_dt,
GREATEST (MAX (d.date_value),
LEAST ('07-Feb-2009', d.fin_year_end_dt))
AS max_val_dt
FROM Position_Fact f, Date_Dimension d
WHERE f.val_dt_dmn_id = d.date_dmn_id
GROUP BY txn_id,
acntng_entry_src,
f.hrarchy_dmn_id,
f.prduct_dmn_id,
f.pstng_crncy_id,
f.acntng_entry_typ,
d.fin_year_end_dt
Execution Plan is as:
11 HASH JOIN Cost: 914,089 Bytes: 3,698,035,872 Cardinality: 77,042,414
                                                                                9 TABLE ACCESS FULL TABLE Date_Dimension Cost: 29 Bytes: 94,960 Cardinality: 4,748
                                                                                10 TABLE ACCESS FULL TABLE Position_Fact Cost: 913,693 Bytes: 2,157,187,592 Cardinality: 77,042,414
Kindly suggest, how to make it faster.
Regards,
Sid

The above is just a part of the query that is taking the maximum time.
Kindly find the entire query and the plan as follows:
WITH MIN_MX_DT
AS
( SELECT
TXN_ID AS TXN_ID,
ACNTNG_ENTRY_SRC AS TXN_SRC,
F.HRARCHY_DMN_ID AS HRARCHY_DMN_ID,
F.PRDUCT_DMN_ID AS PRDUCT_DMN_ID,
F.PSTNG_CRNCY_ID AS PSTNG_CRNCY_ID,
F.ACNTNG_ENTRY_TYP AS ACNTNG_ENTRY_TYP,
MIN (D.DATE_VALUE) AS MIN_VAL_DT,
GREATEST (MAX (D.DATE_VALUE), LEAST (:B1, D.FIN_YEAR_END_DT))
AS MAX_VAL_DT
FROM
proj_PSTNG_FCT F, proj_DATE_DMN D
WHERE
F.VAL_DT_DMN_ID = D.DATE_DMN_ID
GROUP BY
TXN_ID,
ACNTNG_ENTRY_SRC,
F.HRARCHY_DMN_ID,
F.PRDUCT_DMN_ID,
F.PSTNG_CRNCY_ID,
F.ACNTNG_ENTRY_TYP,
D.FIN_YEAR_END_DT),
SLCT_RCRDS
AS (
SELECT
M.TXN_ID,
M.TXN_SRC,
M.HRARCHY_DMN_ID,
M.PRDUCT_DMN_ID,
M.PSTNG_CRNCY_ID,
M.ACNTNG_ENTRY_TYP,
D.DATE_VALUE AS VAL_DT,
D.DATE_DMN_ID,
D.FIN_WEEK_NUM AS FIN_WEEK_NUM,
D.FIN_YEAR_STRT AS FIN_YEAR_STRT,
D.FIN_YEAR_END AS FIN_YEAR_END
FROM
MIN_MX_DT M, proj_DATE_DMN D
WHERE
D.HOLIDAY_IND = 0
AND D.DATE_VALUE >= MIN_VAL_DT
AND D.DATE_VALUE <= MAX_VAL_DT),
DLY_HDRS
AS (
SELECT
S.TXN_ID AS TXN_ID,
S.TXN_SRC AS TXN_SRC,
S.DATE_DMN_ID AS VAL_DT_DMN_ID,
S.HRARCHY_DMN_ID AS HRARCHY_DMN_ID,
S.PRDUCT_DMN_ID AS PRDUCT_DMN_ID,
S.PSTNG_CRNCY_ID AS PSTNG_CRNCY_ID,
SUM
DECODE
PNL_TYP_NM,
:B5, DECODE (NVL (F.PSTNG_TYP, :B2),
:B2, NVL (F.PSTNG_AMNT, 0) * (-1),
NVL (F.PSTNG_AMNT, 0)),
0))
AS MTM_AMT,
NVL (
LAG (
SUM (
DECODE (
PNL_TYP_NM,
:B5, DECODE (NVL (F.PSTNG_TYP, :B2),
:B2, NVL (F.PSTNG_AMNT, 0) * (-1),
NVL (F.PSTNG_AMNT, 0)),
0)))
OVER (
PARTITION BY S.TXN_ID,
S.TXN_SRC,
S.HRARCHY_DMN_ID,
S.PRDUCT_DMN_ID,
S.PSTNG_CRNCY_ID
ORDER BY S.VAL_DT),
0)
AS YSTDY_MTM,
SUM (
DECODE (
PNL_TYP_NM,
:B4, DECODE (NVL (F.PSTNG_TYP, :B2),
:B2, NVL (F.PSTNG_AMNT, 0) * (-1),
NVL (F.PSTNG_AMNT, 0)),
0))
AS CASH_AMT,
SUM (
DECODE (
PNL_TYP_NM,
:B3, DECODE (NVL (F.PSTNG_TYP, :B2),
:B2, NVL (F.PSTNG_AMNT, 0) * (-1),
NVL (F.PSTNG_AMNT, 0)),
0))
AS PAY_REC_AMT,
S.VAL_DT,
S.FIN_WEEK_NUM,
S.FIN_YEAR_STRT,
S.FIN_YEAR_END,
NVL (TRUNC (F.REVSN_DT), S.VAL_DT) AS REVSN_DT,
S.ACNTNG_ENTRY_TYP AS ACNTNG_ENTRY_TYP
FROM
SLCT_RCRDS S,
proj_PSTNG_FCT F,
proj_ACNT_DMN AD,
proj_PNL_TYP_DMN PTD
WHERE
S.TXN_ID = F.TXN_ID(+)
AND S.TXN_SRC = F.ACNTNG_ENTRY_SRC(+)
AND S.HRARCHY_DMN_ID = F.HRARCHY_DMN_ID(+)
AND S.PRDUCT_DMN_ID = F.PRDUCT_DMN_ID(+)
AND S.PSTNG_CRNCY_ID = F.PSTNG_CRNCY_ID(+)
AND S.DATE_DMN_ID = F.VAL_DT_DMN_ID(+)
AND S.ACNTNG_ENTRY_TYP = F.ACNTNG_ENTRY_TYP(+)
AND SUBSTR (AD.ACNT_NUM, 0, 1) IN (1, 2, 3)
AND NVL (F.ACNT_DMN_ID, 1) = AD.ACNT_DMN_ID
AND NVL (F.PNL_TYP_DMN_ID, 1) = PTD.PNL_TYP_DMN_ID
GROUP BY
S.TXN_ID,
S.TXN_SRC,
S.DATE_DMN_ID,
S.HRARCHY_DMN_ID,
S.PRDUCT_DMN_ID,
S.PSTNG_CRNCY_ID,
S.VAL_DT,
S.FIN_WEEK_NUM,
S.FIN_YEAR_STRT,
S.FIN_YEAR_END,
TRUNC (F.REVSN_DT),
S.ACNTNG_ENTRY_TYP,
F.TXN_ID)
SELECT
D.TXN_ID,
D.VAL_DT_DMN_ID,
D.REVSN_DT,
D.TXN_SRC,
D.HRARCHY_DMN_ID,
D.PRDUCT_DMN_ID,
D.PSTNG_CRNCY_ID,
D.YSTDY_MTM,
D.MTM_AMT,
D.CASH_AMT,
D.PAY_REC_AMT,
MTM_AMT + CASH_AMT + PAY_REC_AMT AS DLY_PNL,
SUM (
MTM_AMT + CASH_AMT + PAY_REC_AMT)
OVER (
PARTITION BY D.TXN_ID,
D.TXN_SRC,
D.HRARCHY_DMN_ID,
D.PRDUCT_DMN_ID,
D.PSTNG_CRNCY_ID,
D.FIN_WEEK_NUM || D.FIN_YEAR_STRT || D.FIN_YEAR_END
ORDER BY D.VAL_DT)
AS WTD_PNL,
SUM (
MTM_AMT + CASH_AMT + PAY_REC_AMT)
OVER (
PARTITION BY D.TXN_ID,
D.TXN_SRC,
D.HRARCHY_DMN_ID,
D.PRDUCT_DMN_ID,
D.PSTNG_CRNCY_ID,
D.FIN_YEAR_STRT || D.FIN_YEAR_END
ORDER BY D.VAL_DT)
AS YTD_PNL,
D.ACNTNG_ENTRY_TYP AS ACNTNG_PSTNG_TYP,
'EOD ETL' AS CRTD_BY,
SYSTIMESTAMP AS CRTN_DT,
NULL AS MDFD_BY,
NULL AS MDFCTN_DT
FROM
DLY_HDRS D
Plan
SELECT STATEMENT ALL_ROWSCost: 11,950,256 Bytes: 3,369,680,886 Cardinality: 7,854,734
25 WINDOW SORT Cost: 11,950,256 Bytes: 3,369,680,886 Cardinality: 7,854,734
24 WINDOW SORT Cost: 11,950,256 Bytes: 3,369,680,886 Cardinality: 7,854,734
23 VIEW Cost: 10,519,225 Bytes: 3,369,680,886 Cardinality: 7,854,734
22 WINDOW BUFFER Cost: 10,519,225 Bytes: 997,551,218 Cardinality: 7,854,734
21 SORT GROUP BY Cost: 10,519,225 Bytes: 997,551,218 Cardinality: 7,854,734
20 HASH JOIN Cost: 10,296,285 Bytes: 997,551,218 Cardinality: 7,854,734
1 TABLE ACCESS FULL TABLE proj_PNL_TYP_DMN Cost: 3 Bytes: 45 Cardinality: 5
19 HASH JOIN Cost: 10,296,173 Bytes: 2,695,349,628 Cardinality: 22,841,946
5 VIEW VIEW index$_join$_007 Cost: 3 Bytes: 84 Cardinality: 7
4 HASH JOIN
2 INDEX FAST FULL SCAN INDEX (UNIQUE) proj_ACNT_DMN_PK Cost: 1 Bytes: 84 Cardinality: 7
3 INDEX FAST FULL SCAN INDEX (UNIQUE) proj_ACNT_DMN_UNQ Cost: 1 Bytes: 84 Cardinality: 7
18 HASH JOIN RIGHT OUTER Cost: 10,293,077 Bytes: 68,925,225,244 Cardinality: 650,237,974
6 TABLE ACCESS FULL TABLE proj_PSTNG_FCT Cost: 913,986 Bytes: 4,545,502,426 Cardinality: 77,042,414
17 VIEW Cost: 7,300,017 Bytes: 30,561,184,778 Cardinality: 650,237,974
16 MERGE JOIN Cost: 7,300,017 Bytes: 230,184,242,796 Cardinality: 650,237,974
8 SORT JOIN Cost: 30 Bytes: 87,776 Cardinality: 3,376
7 TABLE ACCESS FULL TABLE proj_DATE_DMN Cost: 29 Bytes: 87,776 Cardinality: 3,376
15 FILTER
14 SORT JOIN Cost: 7,238,488 Bytes: 25,269,911,792 Cardinality: 77,042,414
13 VIEW Cost: 1,835,219 Bytes: 25,269,911,792 Cardinality: 77,042,414
12 SORT GROUP BY Cost: 1,835,219 Bytes: 3,698,035,872 Cardinality: 77,042,414
11 HASH JOIN Cost: 914,089 Bytes: 3,698,035,872 Cardinality: 77,042,414
9 TABLE ACCESS FULL TABLE proj_DATE_DMN Cost: 29 Bytes: 94,960 Cardinality: 4,748
10 TABLE ACCESS FULL TABLE proj_PSTNG_FCT Cost: 913,693 Bytes: 2,157,187,592 Cardinality: 77,042,414

Hello, what the **** is going now? why from my bank account taking money if i didnt use apple more than half year

Hello, what the **** is going now? why from my bank account taking money if i didnt use apple more than half year

We are fellow users here on these forums, we won't know what you are being charged for.
You can view the purchase history on your account via a computer's iTunes : if you log into your account via the Store > View Account menu option you should then see a Purchase History section with a 'see all' link to the right of it, click on that and you should then see a list of your purchases.
And did you have any auto-renewing subscriptions that you didn't cancel ? There are instructions on this page for managing and stopping them : http://support.apple.com/kb/HT4098
If nothing shows on your account's purchase history then you should contact your card issuer, or if they show but you didn't make them (unless they are auto-renewing subscriptions which you didn't cancel) then you can contact iTunes Support via this page : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

How do I find what "other" is in my storage on my mac? "Other" is taking up more than half of my storage on my half a year old MacBook Pro?

I recently got a brand new MacBook Pro for my birthday (about 4 months ago). Pop ups have been showing up saying that my disk is almost full. I checked to see what was taking up the storage and it just said "other." This "other" stuff is taking up more than half of the space on my Mac. Does someone know how to fix this?

For information about the Other category in the Storage display, see this support article. If the Storage display seems to be inaccurate, try rebuilding the Spotlight index.
Empty the Trash if you haven't already done so. If you use iPhoto, empty its internal Trash first:
iPhoto ▹ Empty Trash
Do the same in other applications, such as Aperture, that have an internal Trash feature. Then restart the computer. That will temporarily free up some space.
According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation—not the mythical 10%, 15%, or any other percentage. You also need enough space left over to allow for growth of the data. There is little or no performance advantage to having more available space than the minimum Apple recommends. Available storage space that you'll never use is wasted space.
When Time Machine backs up a portable Mac, some of the free space will be used to make local snapshots, which are backup copies of recently deleted files. The space occupied by local snapshots is reported as available by the Finder, and should be considered as such. In the Storage display of System Information, local snapshots are shown as Backups. The snapshots are automatically deleted when they expire or when free space falls below a certain level. You ordinarily don't need to, and should not, delete local snapshots yourself. If you followed bad advice to disable local snapshots by running a shell command, you may have ended up with a lot of data in the Other category. Ask for instructions in that case.
See this support article for some simple ways to free up storage space.
You can more effectively use a tool such as OmniDiskSweeper (ODS) or GrandPerspective (GP) to explore the volume and find out what's taking up the space. You can also delete files with it, but don't do that unless you're sure that you know what you're deleting and that all data is safely backed up. That means you have multiple backups, not just one. Note that ODS only works with OS X 10.8 or later. If you're running an older OS version, use GP.
Deleting files inside a photo or iTunes library will corrupt the library. Changes to such a library must be made from within the application that created it. The same goes for Mail files.
Proceed further only if the problem isn't solved by the above steps.
ODS or GP can't see the whole filesystem when you run it just by double-clicking; it only sees files that you have permission to read. To see everything, you have to run it as root.
Back up all data now.
If you have more than one user account, make sure you're logged in as an administrator. The administrator account is the one that was created automatically when you first set up the computer.
Install the app you downloaded in the Applications folder as usual. Quit it if it's running.
Triple-click anywhere in the corresponding line of text below on this page to select it, then copy the selected text to the Clipboard by pressing the key combination command-C:
sudo /Applications/OmniDiskSweeper.app/Contents/MacOS/OmniDiskSweeper 2>&-
sudo /Applications/GrandPerspective.app/Contents/MacOS/GrandPerspective 2>&-
Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
Paste into the Terminal window by pressing command-V. You'll be prompted for your login password, which won't be displayed when you type it. Type carefully and then press return. You may get a one-time warning to be careful. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator. Ignore any other messages that appear in the Terminal window.
The application window will open, eventually showing all files in all folders, sorted by size. It may take a few minutes for the app to finish scanning.
I don't recommend that you make a habit of doing this. Don't delete anything as root. If something needs to be deleted, make sure you know what it is and how it got there, and then delete it by other, safer, means. When in doubt, leave it alone or ask for guidance.
When you're done with the app, quit it and also quit Terminal.

BACKING UP LIBRARY-STARTS,AND SHORTLY READS"CANCELING DISC BURN"WHY??

ive been going through the initial steps offered on itunes to back up library.i am only trying to back up purchased items.i then receive the info that says multiple discs required.so i put in first disc,it starts saying "writing to disc" and initializes the burning.i see several tracks pass by as though being burned.but at a certain point it starts reading "canceling the burn,will take a min or two".however more than 10 to 15 mins go by and nothing happens,except same message.and when i go to take the disc out,it informs me that if i cancel disc burn,info will not be burned.but it is not doing anything kind of in a frozen stasis with same message.what do i do?

You might want to direct your question to the iTunes forum. You might also want to search the forums for that and see if there are any threads regarding it.
btabz

More than half of itunes library is no longer accessible

I use my itunes library everyday. Today, all was well, tonight however, more than half of my library has an ! next to the songs and says the file cannot be found. I can't find the songs on my computer, help!

I am having the same problem on my PC. I have copied music files from the mac that is on my network and I have also imported some music from a DVD that was burned. I cannot tell which music isn't playing, but when I click on some of them, an exclamation point comes up and a message flashes on that says that ITunes cannot find the file. It is located in My Music so I don't know why this is happenning. Please help. I am very frustrated with ITunes for Windows...there is no problem with my fiance's Mac, but on my computer this is happenning weekly (I usually erase the files and re-transfer the files and that lasts about a week or so). Thanks!!

I'm trying to restore and back up my iPhone 4 it's taking more than 45 hours. What should I do?

I have been trying to restore and back up my Iphone which i have just updated and I wanted my apps, contacts, messages,etc,. all back on my iPhone but its taking more than 45 hours and it's only 16 GB. I have really important contacts that I need to have in my phone but it would take weeks to get them back one by one without using the back up.

As has been said, you may have a corrupt backup on your computer. However, if it is a Windows computer you may also have a corrupt socket layer in Windows. So first try this (after canceling the backup):
Open a command window with Administrator privileges and type:
netsh winsock reset
then reboot your computer and try again to do a backup (right click on the phone's name in iTunes and select Backup from the floating menu).
If this doesn't work you will have to delete the existing backup. Go to iTunes preferences, Devices page.
Note: If you have a Mac first try restarting it, launching iTunes, and back up as described above.

Cancelling disc burn error 4310

Hi all
I am hoping someone can help.
I have just bought a new Asus laptop with Windows 8 and have installed the latest version of iTunes.
All my music is in the library now and I have created some play lists and went to burn a disc, I selected maximum possible speed and in about 1 second it says "disc initiallising" and then straight away says "cancelling disc burn" and then says "attempt to burn disc failed, an unexpected error (4310) has occured".
I have googled this but cant find a solution that works. I have tried changing the compatibility to Windows 7, also tried Widows XP (service pack 3) and also unchecked this to not use an older version whatsoever. I have tried registering the new computer to my account. I have also tried a lower speed at 1x, when doing this it does a longer initialising and goes through all the songs but as soon as it goes to burn it cancels itself.
I have tried several different blank discs, nothing. It worked perfectly like this on the old computer (windows 7).
I have even ran diagnostics on the DVD drive through iTunes and results are below -
Can anyone help? I just want to put my music on to disc.
Thanks
DVD Drive diagnostic results -
Microsoft Windows 8 x64 Home Premium Edition (Build 9200)
ASUSTeK COMPUTER INC. X55CR
iTunes 11.0.4.4
QuickTime not available
FairPlay 2.4.14
Apple Application Support 2.3.4
iPod Updater Library 10.0d2
CD Driver 2.2.3.0
CD Driver DLL 2.1.3.1
Apple Mobile Device 6.1.0.13
Apple Mobile Device Driver not found.
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 1.9.6.502
Gracenote MusicID 1.9.6.115
Gracenote Submit 1.9.6.143
Gracenote DSP 1.9.6.45
iTunes Serial Number 00CEB61809777220
Current user is not an administrator.
The current local date and time is 2013-07-29 19:40:30.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is supported.
Core Media is supported.
**** External Plug-ins Information ****
No external plug-ins installed.
iPodService 11.0.4.4 (x64) is currently running.
iTunesHelper 11.0.4.4 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
**** CD/DVD Drive Tests ****
No drivers in LowerFilters.
UpperFilters: GEARAspiWDM (2.2.3.0),
E: HL-DT-ST DVDRAM, Rev
Drive is empty.
The last failed audio CD burn had error code 4310(0x000010d6). It happened on drive E: HL-DT-ST DVDRAM on CDR media at speed 10X.

Hi nina:
That is usually cause by using a DVD media that you Macs don't like.
Try using a DVD-R 4x from Verbatim. Seems to have the best track record here.
:)Sue

HT3209 I buy movies and applied all my digital downloads to itunes, and now more than half my movies come up saying my computer cant play because its not capable of HD, I never had a problem before this Icloud,I just feel that ive lost hundreds in digital

Ive always loved Itunes, Ive always thought it was the easiest way to build a library, either music, or movies, ebooks or what have you. Now this new "Icloud" comes into the picture and tells me more than half of my digital movies cant be played because my pc isnt HD compatible, I watched every movie i have in my Itunes library before, therfore I am so frustrated, no one seems to have any answers for me, I think most would feel out of hundreds of dollars of digital movies and feel the same way.....I dont buy movies from Itunes but every movie I've ever bought off the shelves at stores that has digital download on it is put in my itunes library. I Dont want to lose/leave itunes as my system of doing things but.......im at a loss, Anyone Help??? The funniest part of all of it is...Next to all the movies says "Purchased" so obviously they are legit and mine.

I am having a similar problem with iTunes 11 on a Windows 7 box. I was able to rent and play HD movies befor "upgrading" to iTunes 11, however now when I try and rent a movie in HD I get the error: "This cannot be played in HD on this computer. You must rent and watch the HD version on an HD-compatible device. Or, you can rent the SD version and watch it on this computer."
Guess i'll be renting movies from XBox from now on.

Sync and Create project operation from DTR is taking more than one hour

Hi All.
Recently basis team has implemented the track for ESS/MSS application.So When we import the track to NWDS its showing 500 Dcs.
I have successfully done the Sync and create project operation from DTR for 150 DCS and its take 5 min per Dcs.
However after that when i am trying to sync Dc or create project DC from DTR the operation is taking more than 3 hour per DC.Which should not be the case because for rest 150 DC that i ahve done Sync operation adn Create project operation from DTR it hardly takes 5 min per Dc.As this operataion is taking so much time finally i have close the NWDS to stop this operation.
I am using NWDS 2.0.15 and EP7.0 portal SP15 and NWDI is 7.0
Can any body tell how to solve this issue so that i can Sync and Create project from DTR for a DC within 5 min?
Thanks
Susmita

Hi Susmita,
If the DCs are fine in CBS build, then I feel there is no need to test all of them locally in NWDS.
You can verify some certain applications in these DCs, then you sync & create project for these DCs & test run these applications.
As I get you only need to check ( no changes will be done ), yes you can verify them in small groups (say 20-25 DCs/group) in different workspaces so that no workspace is overloaded.
But why do you want to keep a copy of them locally as you are not making any changes, you can Unsync & Remove these projects once verified & use the same workspace to work on the next set of DCs.
Hope this clarifies your concerns.
Kind Regards,
Nitin
Edited by: Nitin Jain on Apr 23, 2009 1:55 PM

I seem to have lost all of my playlists and more than half my songs. How do I get them back? Dont know what I did wrong? Please Help

I seem to have lost all my original playlists and more than half my songs. How do I get them back, where did I go wrong?
If I was to press "restore" does this wipe everything off my library? I always thought that you could never loose songs? That they were always stored somewhere
in there. Please help,

If those tabs aren't in History > Recently Closed Tabs or Windows then they are probably lost.
You can try to search them in the History if you haven't bookmarked them.
Using the "Show my windows and tabs from last time" setting is a more reliable way to restore session data.
* Tools > Options > General > Startup: "When Firefox Starts": "Show my windows and tabs from last time"

Taking more than 2 min T-SQL

Hi Friends,
SELECT
DATEPART(YEAR, SaleDate) AS [PrevYear],
DATENAME(MONTH, SaleDate) AS [PrevMonth],
SaleDate as SaleDate,
Sum(Amount) as PrevAmount
FROM TableA A
WHERE SaleDate >= DATEADD(yy, DATEDIFF(yy, 0, GETDATE()) - 1, 0)
AND SaleDate <= DATEADD(dd, -1, DATEADD(yy, DATEDIFF(yy, 0, GETDATE()), 0))
-----'2013-12-31 00:00:00.000'
GROUP BY
SaleDate
This Query taking more than 2 min to pull the results .... basically I was passing last year first date and last date (should derive based on getdate())
if I pass static values like this WHERE SaleDate >= ''2013-01-01 00:00:00.000''
AND SaleDate <= '2013-12-31 00:00:00.000'
then it is pulling results in fraction of seconds.....
Note: I was keeping this code in View I have to use only View ( I know we can write store procedure for this but I dont want sp I need only View)
any idea please how to improve my view performance?
Thanks,
RK

Do you have an index on SaleDate column ? If so , is this NCI or CI? How much data does it return? Can you show an execution plan of the query?
Best Regards,Uri Dimant SQL Server MVP,
http://sqlblog.com/blogs/uri_dimant/
MS SQL optimization: MS SQL Development and Optimization
MS SQL Consulting:
Large scale of database and data cleansing
Remote DBA Services:
Improves MS SQL Database Performance
SQL Server Integration Services:
Business Intelligence

XMLSerialize taking more than 10 hours to execute in Oracle

Hi All,
In my current project, converting oracle query into xml format first and then using XMLSerialize for printing but while execution it is taking more than 15 hours and more.
The basic oracle query taking hardly 10 second to execute and converting from oracle query to xml format taking around 1 min but when i am using XMLSerialize with order by clause it is not executing.
Can some help for fixing this performance issue causing due to XMLSerialize
Thanks in advance.
after adding the below clause performance issue started
select XMLSerialize(CONTENT rec_str as CLOB) as test_XML, 100 + rnum as ORDER_CLAUSE from xxtemp
Edited by: redrose1405 on May 1, 2012 12:45 AM

How much free space do you have on your boot drive?
OT

Cancelling disc burn taking more than half-an-hour

Similar Messages

Maybe you are looking for