Syncronization the data between tow tables

hii
i have two database database 1 and database 2 the both database have table citizen(citizen_ssn, citizen_name ) with the same structure
ok ,
and i create database link from database 1 to database 2 (link name : link1 )
and i create another link fro database 2 to database 1 (link name :link2 )
i want to synchronize data between the two tables
in other word i want when new record add to database1 go to database2 and check if that recrod exist(use citizen_ssn) or not if it exist then add the record only in database1
if not add the record in database1 and database2,
and if there is record inserted in database 2 i will go to database1 and check if it exist if it exist add the record in database2 if not add it in database1 and database2
can i do that in real time or not .
thank you ..........

i think it will be the same senario
after insert in database 1 go to database 2 and then the befor insert trigger will fire
and check if the citizenssn is in the table or not
if not then insert the record
and the trigger in database 2 after insert will fire and go to batabase 1 to insert the same record and in database 1 the befor insert trigger will fire and so on
the same infinity loop
?????????????????????????????????????????????

Similar Messages

  • Query the data between two tables

    Need help for query the data between two tables
    Table 1: Time sheet
    P.ID      P.Name EmpID HoursSpend DateTime
    c12234  Test      25        4                06/12/2013
    c12234  Test      25        7                06/13/2013
    c12234  Test      25        8                06/15/2013
    c12234  Test      5          3                06/21/2013
    c12234  Test      2          5                07/15/2013
    c12234  Test      25        4                07/21/2013
    Table 2: cost table
    EmpID  FromDate       ToDate         Rate
    25         05/01/2013    06/30/2013    250
    2         04/01/2013    05/31/2013      150
    25         07/01/2013     09/30/2013    300 
    Output
    P.ID      P.Name EmpID HoursSpend DateTime       Rate   Total (HoursSond x Rate)
    c12234  Test      25        4                06/12/2013    250     1000 (4*250)
    c12234  Test      25        7                06/13/2013    250      1750
    c12234  Test      25        8                06/15/2013    250      
    2000
    c12234  Test      25        4              07/21/2013     300       
    1200
    c12234  Test      2          5              07/15/2013    150          
    750
    ===========================================     
    Total                           28                                                 
    6700
    ============================================
    Here EmpID =2 don't have rate in the cost table on july month should be pick from last entry from cost table.

    Hi Gopal,
    According to your description, it seems that the output needn’t include the row when EmpID=2. Because the DateTime for it in Table1 doesn’t included between FromDate column and ToDate column. After testing the issue in my environment, we can refer to the
    query like below to achieve your requirement:
    SELECT time.*,cost.EmpID,cost.Rate,(time.HoursSpend * cost.Rate)as [Total (HoursSond x Rate)]
    FROM [Time sheet] as time
    INNER JOIN
    [cost table]as cost
    ON time.EmpID = cost.EmpID
    AND time.DateTime BETWEEN cost.FromDate AND cost.ToDate
    If there are any other questions, please feel free to ask.
    Thanks,
    Katherine Xiong
    Katherine Xiong
    TechNet Community Support

  • Intervals, synchronize the data between two oracle tables located in diffe

    Hi Experts,
    Is there any way I can, at set intervals, synchronize the data between two oracle tables located in different servers? What is the software, if there is any? If there are steps I can follow, so much the better.
    Thanks!

    I'm not sure what you want to achieve here...
    I want to synchronize both the Servers , so that it can update HO servers as well as Factory Server with the complete data. Could you please elaborate a little bit more; basing on your description I could also tell you how to setup timesync for those two servers if I understand "complete data" as the current date and time...
    Also a lot of solutions are platform and version specific so it would help if you could indicate OS and Database Versions (4 digit).
    And I still fail to see what this has to do with forms. You might want to post your question to the Database General forum: General Database Discussions
    cheers

  • How to dynamically display the data from a table base on row selection of another table in ADF

    Hi ,
    I have a requirement in ADF. I need to change the data of a table  based on row selection of another Table . Both the table have a Parent Child relationship between them. They have a common attribute say department_id.
                                                                                         For this I created bind variable in view object of employees table and wrote a where clause in the sql query using that bind variable. Then I created method for selection listener of department Table in java bean.
    My method is following
        public void onrowselection(SelectionEvent selectionEvent) {
            RichTable richTable = (RichTable)selectionEvent.getSource();
                            CollectionModel tableModel = (CollectionModel)richTable.getValue();
                            JUCtrlHierBinding adfTableBinding = (JUCtrlHierBinding)tableModel.getWrappedData();
                            Object selectedRowData = richTable.getSelectedRowData();
                            JUCtrlHierNodeBinding nodeBinding = (JUCtrlHierNodeBinding)selectedRowData;
                    oracle.jbo.domain.Number newVal = (oracle.jbo.domain.Number) nodeBinding.getAttribute("DepartmentId");
                    Number pallet = newVal.bigDecimalValue();
                    System.out.println("Selected values " + pallet);
            BindingContext bindingctx = BindingContext.getCurrent();
                          BindingContainer bindings = bindingctx.getCurrentBindingsEntry();
                          DCBindingContainer bindingsImpl = (DCBindingContainer) bindings;
                  DCIteratorBinding dciter = bindingsImpl.findIteratorBinding("EmployeesView1Iterator");//access the iterator by its ID value in the PageDef file
                          ViewObject vo =dciter.getViewObject();
                          vo.setNamedWhereClauseParam("DepartmentId", pallet);//enter your value
                          vo.executeQuery();
    It is printing the selected value of department id from department table in the log. But it is not able to pass the value to employees view. It is showing the following error in the log
    "Definition DepartmentId of type Variable is not found in EmployeesView1."
    I will be very thankful if someone helps me to solve this errror or is there any other way to achieve the same requirement.
    Thanks
    Nilesh

    Note quite sure why you simply wont create a viewlink for the viewobject the tables are based on..
    The viewlink attribute will be based on the departmentId and it's a simple master detail relationship which automatically uses ppr.
    However, if both tables are on the same page; using your hack about;
    On the underlying viewobject, define a viewcriteria e.g. "listById" and set your bind variable here.
    I would bind table two to a RichTable component:
    RichTable t2;
    public void onrowselection(SelectionEvent selectionEvent) {
            RichTable richTable = (RichTable)selectionEvent.getSource();
                            CollectionModel tableModel = (CollectionModel)richTable.getValue();
                            JUCtrlHierBinding adfTableBinding = (JUCtrlHierBinding)tableModel.getWrappedData();
                            Object selectedRowData = richTable.getSelectedRowData();
                            JUCtrlHierNodeBinding nodeBinding = (JUCtrlHierNodeBinding)selectedRowData;
                    oracle.jbo.domain.Number newVal = (oracle.jbo.domain.Number) nodeBinding.getAttribute("DepartmentId");
                    Number pallet = newVal.bigDecimalValue();
                    System.out.println("Selected values " + pallet);
                   refreshTable2(pallet);
            BindingContext bindingctx = BindingContext.getCurrent();
                          BindingContainer bindings = bindingctx.getCurrentBindingsEntry();
                          DCBindingContainer bindingsImpl = (DCBindingContainer) bindings;
                  DCIteratorBinding dciter = bindingsImpl.findIteratorBinding("EmployeesView1Iterator");//access the iterator by its ID value in the PageDef file
                          ViewObject vo =dciter.getViewObject();
                          vo.setNamedWhereClauseParam("DepartmentId", pallet);//enter your value
                          vo.executeQuery();
    private void refreshTable2(Number pallet){
    RichTable x=getT2();
    CollectionModel cm=(CollectionModel)x.getValue();
    JUCtrlHierBinding jcb=(JUCtrlHierBinding)cm.getWrappedData();
    BindingContainer bindings = bindingctx.getCurrentBindingsEntry();
    DCBindingContainer bindingsImpl = (DCBindingContainer) bindings;
    DCIteratorBinding dciter = bindingsImpl.findIteratorBinding(jcb.getName()+"Iterator");
    ViewObject vo =dciter.getViewObject();
    ViewCriteriaManager vcm=vo.getViewCriteriaManager();
    ViewCriteria vc=vcm.getViewCriteria("listById");
    vo.applyViewCriteria(vc);
    vo.setNamedWhereClauseParam("DepartmentId",pallet);
    vo.executeQuery();
    AdfFacesContext.getCurrentInstance().addPartialTarget(getT2());

  • How can i convert the data from mutiple-table to the other database(MSSQL)?

    Dears,
    How can i convert the data from mutiple-table to the other database such as MS-SQL?
    I have a third party system based on MS-SQL 2000.
    Now we want to make a integration between SAP R/3(Oracle) and SQL server.
    When my user releases the purchase order in R/3, the application we coded will convert the releated data to the temp database on the SQL server.
    But i don't know which tools will help me reach the purpose.  BAPI, LSMW, IDoc... ???
    Would anybody tell me which way is better and how to do?
    Thanks a lot!
    Kevin Wang

    Hello Kevin,
    The question to use which method depend on your detail requirements. If you use BAPI, you need to find which Bapi can provide the data you want. Bapi normally use as a function called by external system. So you need to develop an external program like VB/Java to call this Bapi and move it to SQL. LSMW is use when you want to upload data from an external system to SAP. So it does not serve your requirement. Idoc can be use to export data to an external system. Again like Bapi, you need to find what Idoc can provide the data you want. However, it does not any programming from the external system. If I were you, based on your requirements, I think writing an Abap program that read the data you want and download it to NT/SQL server will be faster and easier.

  • Insertion of data between 2 tables ( 1 to * relationship )

    Hi all, I am new to Oracle ADF, I have a problem with the insertion of data between 2 tables (Table A and Table B), I have the ratio 1 to *, and I need to insert data in table B (* Relationship) when insert in Table A all goes well, but when inserted in Table B, I need the primary key value in Table A () in the value field in table B that is as foreign key.
    Ie
    Value Table A
    coda = 20 -> primary key
    Table B values
    1 set of values
    val_1,
    val_2,
    val_3,
    coda = 20 -> need this value is constant up to do a Commit.
    set of values 2
    val_1,
    val_2,
    val_3,
    coda = 20 -> need this value is constant up to do a Commit.
    How I can do it?
    thanks

    Thanks for you answers 'M.Jabr'
    I was wrong, because the relationship 1 to * between tables A and B, I was writing the groovy expression in each table, in this case in Table B (A.codSolicitude), but now I notice that within the DataControls, but specifically in the control data of Table A, there is a relationship between the board B, and I thought to insert into the related table that appears as a master/detail, and first inset in table A and then in Table B in the same page master/detail, and A.CodSolicitude value is automatically filled in Table B, and performed the Commit and everything works. !
    Thanks for you help.
    Now if you can give me some examples with images that are on the web similar to this problem would be great:) Thanks!

  • Need to find the Difference between two table

    Hello ,
    I have stucked in program as below scenario:-
    I have two tables of huge data of same structure in a same schema.I need to find the difference exact values in tables.
    By using MINUS we can find the difference between two table ,i need to find the what exact difference in the there values with colunm and value at that column.
    Example TableA
    Col1 col2 col3 col4 col5.... col50
    10 ABC 2001 EE 444 TT
    40 XYZ 3002 RR 445 TT3
    80 DEF 6005 YY 446 YY8
    TableB
    Col1 col2 col3 col4 col5.... col50
    10 ABC 2001 EE 444 TT
    40 XYZ 3002 RR 445 TT3
    81 DEF 6005 Yu 447 YY8
    I need to the out put like this :-
    The Diffence between two table is
    TableA.COL1=80 TableB.Col1=81, Different
    TableA.Col4=YY TableB.col4=Yu,Different
    TableA.Col5=446TableB.col5=447,Different
    Please suggest me to write the pl/sql program for the same
    thanx in advance
    KK

    Thanx friends for all your efforts
    I have a sample code for the same,this will compare the two tables for single row in each table .
    what r the modification needed for the multiple rows of values in the two tables??
    Please suggest!!
    CREATE OR REPLACE PROCEDURE test_compare
    IS
    TYPE t_col
    IS
    TABLE OF VARCHAR2 (30)
    INDEX BY PLS_INTEGER;
    l_col t_col;
    j NUMBER := 0;
    l_sql VARCHAR2 (2000);
    col1 VARCHAR2 (30);
    col2 VARCHAR2 (30);
    val1 NUMBER;
    val2 NUMBER;
    status VARCHAR2 (30);
    CURSOR c1
    IS
    SELECT column_id, column_name
    FROM all_tab_columns
    WHERE table_name = 'TEST1';
    BEGIN
    FOR i IN c1
    LOOP
    j := j + 1;
    l_col (j) := i.column_name;
    END LOOP;
    FOR k IN 1 .. j
    LOOP
    l_sql :=
    'SELECT '
    || ''''
    || l_col (k)
    || ''''
    || ', '
    || 'TEST2.'
    || l_col (k)
    || ', '
    || ''''
    || l_col (k)
    || ''''
    || ', '
    || 'TEST1.'
    || l_col (k )
    || ', '
    || 'DECODE(TEST2.'
    || l_col (k)
    || ' -TEST1.'
    || l_col (k)
    || ', 0, ''NO CHANGE'', ''CHANGED'') FROM TEST2, TEST1';
    EXECUTE IMMEDIATE l_sql INTO col1, val1,col2, val2, status;
    IF status = 'CHANGED'
    THEN
    DBMS_OUTPUT.put_line( 'TEST2.'
    || col1
    || '='
    || val1
    || ', TEST1.'
    || col2
    || '='
    || val2
    || ', '
    || status);
    END IF;
    END LOOP;
    EXCEPTION
    WHEN OTHERS
    THEN
    DBMS_OUTPUT.put_line ('Error:- ' || SQLERRM);
    END;
    /

  • How to compare data between two tables?

    Hi,
    My team is trying to develop a SAP data migration tool (DMT) using ABAP.
    One of the functionalities in the DMT is to validate the data in the staging area against the loaded SAP data.
    The tables in the stagin area are customer tables (i.e. user-defined tables starting with Y, Z).
    How do I compare the data in the staging area against data that are loaded into SAP tables? Are there some built-in SAP functions to do this? Or, are there some better ways of doing this (e.g. instead of comparing against data in the SAP tables, we compare with some INTERNAL tables)?
    Any help would be greatly appreciated, thanks!

    Hi Kian,
    Use <b>SCMP</b> transaction to compare data between two tables and you can not use this for comparing internal tables.
    Thanks,
    Vinay

  • Verify the data between SAP R/3 and SAP BW

    Hi Experts,
    How to verify the data between SAP R/3 and SAP BW at the time of data mismatches in reports.
    give me the proper solution.
    Thanks,
    Syam

    Hello,
    You must know what is the infoprovider source of the data shown in the report.
    Once you know it, check the content filtering by same restrictions as in the mismatch report. Now you have the data in BW.
    Then you have to know the proper transation or table in R/3, from where the extractor retrieves the data to populate the infoprovider; make same restrictions and compare it with data in BW.
    Regards

  • Select all the dates between two txt fields. how?

    In a 6i form cursor I need to select all the dates between two provided dates. I have two text fields FLD1 and FLd2 with date datatype. There is no table behind both the fields.
    For example
    :FLD1:='01-MAR-2013';
    :FLD2:='10-MAR-2013';
    Now I have to select all the dates from 01-mar-2013 to '10-mar-2013'. how to do it?

    Gul wrote:
    In a 6i form cursor I need to select all the dates between two provided dates. I have two text fields FLD1 and FLd2 with date datatype. There is no table behind both the fields.
    For example
    :FLD1:='01-MAR-2013';
    :FLD2:='10-MAR-2013';
    Now I have to select all the dates from 01-mar-2013 to '10-mar-2013'. how to do it?As'salamualikum Gul
    Try this
    SELECT TO_DATE('01-MAR-2013', 'DD-MON-RRRR') - 1 + rownum AS d
    FROM ALL_OBJECTS
    WHERE TO_DATE('01-MAR-2013', 'DD-MON-RRRR') - 1 + rownum BETWEEN TO_DATE('01-MAR-2013', 'DD-MON-RRRR') AND TO_DATE('10-MAR-2013', 'DD-MON-RRRR')Hope this helps

  • Transaction to see common data between two tables

    Is there any transaction to see common data between two tables with out creating views.
    what is the transaction to see the link between two tables
    regards
    pavan

    Hi,
            Go to a transparent table for which you want to know the common fields, from there click the button GRAPHICS (shortcut Ctrl + Shift + F11) in the application tool bar. Then you are redirected to a list containing the tables belonging to the same group. There select whatever tables you would like to see and click COPY. A window will pop-up and will show the relationship between the fields of the tables in a flow chart format.
    see to this link also.
    Common fields b/w  tables
    Regards,
    Revathi Bhoopal.

  • How to delete the data in a table using function

    hi all,
    i need to delete the data in a table using four parameters in a function,
    the parameters are passed through shell script.
    How to write the function
    Thanks

    >
    But the only thing is that such function cannot be used in SQL.
    >
    Perhaps you weren't including the use of autonomous transactions?
    CREATE OR REPLACE FUNCTION remove_emp (employee_id NUMBER) RETURN NUMBER AS
    PRAGMA AUTONOMOUS_TRANSACTION;
    tot_emps NUMBER;
    BEGIN
    SELECT COUNT(*) INTO TOT_EMPS FROM EMP3;
    DELETE FROM emp3
    WHERE empno = employee_id;
    COMMIT;
    tot_emps := tot_emps - 1;
    RETURN TOT_EMPS;
    END;
    SQL> SELECT REMOVE_EMP(7499) FROM DUAL;
    REMOVE_EMP(7499)
                  12
    SQL> SELECT REMOVE_EMP(7521) FROM DUAL;
    REMOVE_EMP(7521)
                  11
    SQL> SELECT REMOVE_EMP(7566) FROM DUAL;
    REMOVE_EMP(7566)
                  10
    SQL>

  • Not able to get the data in COSB Table

    Hi Colleagues,
    I have created a Project and assign the WBS number to a Sales order and also have done all the settings in Result Analysis.
    But still not able to get the data in COSB table.
    Could you please suggest me the steps and process, Might be i have missed something..
    Thanks in Advance
    Regards
    Nitin

    Hi Ken,
    I have below mentioned requirement
    COSB will show value by object number and need to pass the object number to PRPS table to find the corresponding WBS element and then pass the WBS element to VBAP table to find the corresponding SO line item.
    Please let me know as Functional prospect what I have to do to bring this values in COSB table.
    Regards
    Nitin

  • How to get the data from Pooled Table T157E.

    Hi Experts,
    How to get the data from Pooled Table T157E.
    Any help.
    Thanks in Advance,
    Ur's Harsha.

    create some internal table similar to T157E and pass all data as per SPRAS.
    After that use internal table in your program as per the requirement.
    Regds,
    Anil

  • How to delete the data from partition table

    Hi all,
    Am very new to partition concepts in oracle..
    here my question is how to delete the data from partition table.
    is the below query will work ?
    delete from table1 partition (P_2008_1212)
    we have define range partition ...
    or help me how to delete the data from partition table.
    Thanks
    Sree

    874823 wrote:
    delete from table1 partition (P_2008_1212)This approach is wrong - as Andre pointed, this is not how partition tables should be used.
    Oracle supports different structures for data and indexes. A table can be a hash table or index organised table. It can have B+tree index. It can have bitmap indexes. It can be partitioned. Etc.
    How the table implements its structure is a physical design consideration.
    Application code should only deal with the logical data structure. How that data structure is physically implemented has no bearing on application. Does your application need to know what the indexes are and the names of the indexes,in order to use a table? Obviously not. So why then does your application need to know that the table is partitioned?
    When your application code starts referring directly to physical partitions, it needs to know HOW the table is partitioned. It needs to know WHAT partitions to use. It needs to know the names of the partitions. Etc.
    And why? All this means is increased complexity in application code as this code now needs to know and understand the physical data structure. This app code is now more complex, has more moving parts, will have more bugs, and will be more complex to maintain.
    Oracle can take an app SQL and it can determine (based on the predicates of the SQL), which partitions to use and not use for executing that SQL. All done totally transparently. The app does not need to know that the table is even partitioned.
    This is a crucial concept to understand and get right.

Maybe you are looking for