Syntax error in standard SAP program.

Can someone help me. I'm getting the following error while executing
"Include /sapboq/bos_lbos01top, No component exists with the name /sapboq/mitem. Check the program SAPLBOS01"
Error in the ABAP Application Program
The current ABAP program "BS01_SALESORDER_GETDETAIL=====FT" had to be
terminated because it has
come across a statement that unfortunately cannot be executed.
The following syntax error occurred in program "SAPLBOS01 " in include
"/SAPBOQ/BOS_LBOS01TOP " in
line 9:
"No component exists with the name "/SAPBOQ/MITEM". ."
Edited by: nithinrayal on Jul 12, 2010 9:54 PM

Hi,
Go to txn SE38 and display program "BS01_SALESORDER_GETDETAIL=====FT". Then do a syntax check. It should tell you what is the error.
I guess its some support pack that is missing. Try contacting SAP for this.
Regards
Prasenjit

Similar Messages

ABAP SYNTAX ERROR IN STANDARD SAP TRANSFORMATION

Hi experts, I am facing a problem while activating a transformation for the cube 0CCA_C11. I installed the flow in 3.5 and wen i was migrating the flow, i first migrated the update rule. At that time, the transformation is giving me " syntax error in the routine" for the infoobject 0CO_REPLINE. The eroor message is given below:
E:The type "_TY_S_SC_1_FULL" is unknown, but there is a type with the similar name "_TY_S_TG_1_FULL". "_TY_S_TG_1_FULL".

Hi,
Please check routine if any for 0CO_REPLINE and also expert routine.
Regards,
Rema.

Syntax error in standard program after upgrade

Hi,
After upgrade from 7.0 to 7.3, we are facing a syntax error in standard program that is used in one of our process
The error says:
The field "G_REQUIDPARENT" is unknown, but there is a field with the s"
imilar name "G_REQUID_LAST". "G_REQUID_LAST"."
The system cannot find this object inside include LRSBM_REQUEST_GUIP04, that belongs to program SAPLRSBM_REQUEST_GUI
We assume that this is associated with the upgrade but we cannot find any solution in the web. Besides, this is a standard program so we cannot perform any change directly. We look for SAP Notes to apply but we didn't find nothing worthwhile
Basically, we are receiving a dump with the error message posted above and we found the syntax error, but the thing is that we don't know how to fix it, due to the fact that is a standard program and we cannot change it
I know that SAP could remove some object reference during the upgrade, but there should be an anticipated plan to fix this kind of errors, right?
Can you shed some light on this, please ?
Thanks a lot
Ale

Hi Ale,
If you make sure there are no customization around the object and SGEN already run, I think you can just open a OSS message to SAP to looking for a fix.
Regards
Bill

Requirement to check the syntax error of Customize SAP Objects in existing landscape.

Hi All,
I have two requirements which are a s follows :
1 ) Check the syntax error of customize SAP Objects in existing landscape except using the Tools which are already given by SAP( Example : Code Inspector , Extended Syntax Check etc.). I have to create a program to fulfill this requirement.
2 ) In case of SAP Upgrade is it possible to know the syntax error in advance that the existing source code will not work in the upgrade version?
Please help me out to solve my issues. Thanks in advance.

Dear Abhishek,
For the code inspector, the syntax check and the extended syntax check, you can define a set of objects to be teste thru SCI:
Go to SCI
In the block 'Object Set', you can create a set. For ths, you have to give it a name, select with the icon left of the textbox if this is a global (for all users) or a local set and click the create Icon.
in the next field, you can define which objects ... are part of the object set.
When using SCII to execute the code inspector, you can specify this set instead of a transport(s) or programming objects.
To run only the syntax check and or the extend syntax check, you can specify a check variant in SCI (third screen block) which contains only those tests or you can in SCII uncheck all tests except those 2.
Regards,
Hans

How to find CUSTOMER EXIT for a Standard SAP program

How to find CUSTOMER EXIT for a Standard SAP program

Hi
To introduce the techniques of enhancement in standard SAP system. SAP creates customer exits for specific programs, screens, and menus within standard R/3 applications. These exits do not contain any functionality. Instead, the customer exits act as hooks. You can hang your own add-on functionality onto these hooks.
They do not affect standard SAP source code.
When you add new functionality to your SAP System using SAPs exits, you do not alter the source code of standard SAP programs in any way. The code and screens you create are encapsulated as separate objects. These customer objects are linked to standard applications, but exist separately from SAPs standard software package.
They do not affect software updates.
When you add new functionality to your SAP System using SAPs exits, your objects (called customer objects) must adhere to strict naming conventions. When it comes time to upgrade a to a new software release, customer objects names ensure that they will not be affected by any changes or new additions to the standard software package.
Customer exits are not available for all programs and screens found in the SAP System.
Any change made to an SAP object in a customer system is called a modification. Customers usually modify their systems for one of two reasons. Either they make changes to the SAP standard in order to adjust the R/3 System to their specific business needs (actual modifications), or they alter individual SAP objects in order to correct an error (as recommended in an SAP error note).
You should only modify the SAP standard if the modifications you want to make are absolutely necessary for optimizing work flow in your company. Be aware that good background knowledge of application structure and flow are important prerequisites for deciding what kind of modifications to make and how these modifications should be designed.
SAP application programmers create SAP enhancements in transaction SMOD using function module exits, menu exits, and screen exits.
Customers are given a catalog containing an overview of existing SAP enhancements. They can then combine the SAP enhancements they want into an enhancement project using transaction CMOD.
SAP enhancements are made up of component parts. These components include function module exits, menu exits, and screen exits. A specific component may be used only once in a single SAP enhancement (this guarantees the uniqueness of SAP enhancements).
Customer enhancement projects consist of SAP enhancements. Each individual SAP enhancement may be used only once in a single customer enhancement program (this guarantees the uniqueness of a customer project).
SAP application programmers preplan function module exits, menu exits, and screen exits for their applications and combine them to create useful enhancements for the R/3 System.
Customers create their own enhancement projects for their systems using SAP enhancements. You can customize the individual components of an enhancement project by creating your own include programs (for function module exits), texts (for menu exits), and subscreens (for screen exits).

Z TCode for Standard SAP Program

Hi all,
Is it allowed by default (by SAP standard rule) to create a Z TCode for the existing standard SAP program? By doing this, I will have two transaction codes for one standard SAP program. One is the existing SAP standard TCode and the other one is the Z (custom) TCode. Both point to the same SAP standard program.
I tried to copy TCode ME22 to ZME22 but I get error message "Transaction code ZME22 not defined" when I tried run it. ZME22 was successfully created (no error) with the same setting as ME22 during copying.
Thanks in advance.
Regards,
Goh Tiam Tjai

Goh,
yes obvoiusly you can create another t-code.
as i want to add more thing which all were missed is that you have to create parameter transaction from se93.
and give default transaction as me22 in your case.
hope now your problem has been resolved.
please mark all good answer.
Amit.

InfoSet Query: Syntax Error while generating the program.

Dear All,
I have a Query in CRM system which contains an Infoset based on LDB.
The InfoSet Query throws up a Syntax error while generating the program.
So, we are not able to change the Infoset using the Infoset Query through SQ01.
The error is as follows:-
Syntax error in program "AQZZ==/SAPQUERY/CRM_ACTMON1 ".
Error in the ABAP Application Program
The current ABAP program "CL_QUERY_OUTPUT_DEFINITION====CP" had to be
terminated because it has
come across a statement that unfortunately cannot be executed.
The following syntax error occurred in program "AQZZ==/SAPQUERY/CRM_ACTMON1 "
in include "AQZZ==/SAPQUERY/CRM_ACTMON1 " in
line 28:
""CRMT_REPORT_LOCATORLIST" must be a flat structure. You cannot use int"
"ernal tables, strings, references, or structures as components. -"
Please help me arrive at an solution, so that we are able to change the Infoset through the InfoSet Query.
Awaiting your reply as soon as possible.
Thanks and Regards,
Pankaj.

There is an error in your query, specifically in the definition of CRMT_REPORT_LOCATORLIST. In the short dump (transaction ST22) you will see more details and the exact location of an error if you just scroll down.
I can't tell more because this problem is specific to your system, to which I have no access. Read the whole dump and look at all the objects mentioned there.

Z search field in standard sap program

Hi,
I would like to ask if Z search field can be created in the standard SAP program.
Basically I need modify the search field used when searching for Business area in creation of asset master data (tr. AS01).
It shows the list of table tgsbt. But I would like to exclude by default some rows of the table and also would like to sort it in different way (by text).
Is that possible, if so, could anyone give me a hint how to do that?
Many thanks,
Honza

Hi Jan,
Please go thorugh the below link.
http://wiki.sdn.sap.com/wiki/display/Snippets/ImplementingSearchHelp+Exits

How to uncomment code in Standard SAP Programs

Hi Experts,
how to uncomment entire code of standard SAP programs which is commented .
Standard SAP Program is fully commented,i have to uncomment it ,to work it as normal.
i saw that some lines * / * like this are there in the commented code .
what is the way to un comment this ?
Thanks in advance,
Regards,
Hitu

Well, if it is commented by your company - This doesnt ask for access key but if it is commented by SAP and you want to uncomment, you need access key.
You can ask basis guys to get access key for the object. you need to provide the program name and other information.
Other information: - go to the GOTO on application tool bar and select object direct entry.... you need to provide the full object key.
To uncomment the code - select the lines and right click - uncomment . This can only be done in editable mode.

How to change standard SAP program SAPLFSKB to add custom fields...?

Hi Gurus,
I have to change the standard SAP program SAPLFSKB screen 100 to add custom fields...i looked into OSS notes and there is a note: 174413 that provides steps to add custom fields...but when i try to do this it doesnt let me do it...it says that request cannot be changed....do i have to use modification agent...if that is the case then how shud i proceed with this....so please provide me some inputs....
your help will be appreciated...
Any inputs for me....
cheers:sam
Message was edited by:
Sam williams

try going into edit->enhancement operations->create. this will allow up to add your customized field.

How to change the field length in standard sap program.

Hi All,
How to change the field length in standard sap program.
Urgent
Example:
Text1 type c length 75,
To change :
Text1 type c length 150,
Point will be rewarded..
Thank you,
Vikram.C

If the only solution is to change the sap standard program, simply change the program, it will prompt for an access key. This key can be retrieved in the SAP support portal (service.sap.com) at keys and requests, sccr keys, register object.
Sometimes these actions are outsourced to a competence center, so maybe youre not entitled to do this, in any case ask a resident senior developer for support.
regards, Rob

Info. / Doc. on Changes to Standard SAP Program, Tables, Fields in SAP 6.0

We are in the process of upgrading our SAP from 4.6c to 6.0 and I am looking for a document or white paper that summarizes changes to Standard SAP Programs, Tables/Fields, Function Modules etc.. from what used to be in SAP 4.6c to what it is in SAP 6.0. I am not sure if such a comprehensive document exists or is posted in the forum.
Any help or information in this regard will be highly appreciated.
Thanks
ram

Hi Ram,
<< We are in the process of doing our technical upgrade from SAP 4.6c to 6.0. I am looking for a white paper or documentation listing the changes made to the standard SAP Programs, Tables, Fields, Function Modules etc. from Rel. 4.6c to 6.0. >>
Do you want to know what custom changes were done to SAP standard objects in your system or do you want to know what changes SAP did from 4.6c to ECC6.0.
There is no white paper or documentation to find out custom changes made to SAP standard objects. but there were many tools in the market to find out and tell what changes were done to sap standard objects in your system.
Your question seems ambiguous please clear it.
Thanks,
Kiran.

Changes in standard SAP programs

Hello all,
How could I track the changes made to standard SAP programs by a client? The system is 4.0B and some standard R/3 application's source code has been modified to provide some non-standard functionalities (that was, probably, the worst solution - in many of the cases they could have use user exits or enhancements for achieving the same purpose).
In the table TRDIR (or, if you will, D010SINF) I can find the programs that were created by a set of users such as 'SAP' or 'SAP*' or 'DDIC' and were subsequently modified by client users (developers).
Furthermore, finding the development class of those programs (function module 'RS_PROGRAM_GET_DEVCLASS') gives me a better idea about what applications were really modified by the client.
Still, many of these programs that appear to have been created by 'SAP' or 'SAP*' and modified by other (client) users were generated as a consequence of configuration changes made by those client users, and therefore are not changes made to SAP R/3 standard.
Is there a way to track only those standard programs that were indeed modified by the client, at source code level?
Thank you,
Bogdan

Hi Bogdan,
you can program your own tool-abap:
1) select table E070 ( TRFUNCTION = 'R' )
2) -> for all entries select V_E071EU
(TRKORR = e070-TRKORR)
3)-> list all found objects:
-V_E071EU-PGMID
-V_E071EU-OBJECT
-V_E071EU-OBJ_NAME
and create an interactive list (e.g. for SE11 and SE38)
hope this helps
Andreas

FTP option in standard SAP programs

Hi,
Do standard SAP programs provide FTP option and if yes, is selection screen the only option of finding the FTP option.
Regards,
Vijay

I don't get your requirement - pls post more details
A.

Syntax Error when generate print program in HRFORMS

Dear All,
I created form for payslip using HRFORMS, the name form is ZPS_TPI_01. When I activate the form, the error raised: Generated print program contains a syntax error
Diagnosis
Generated print program /PYXXFO/ZPS_TPI_01_PRNT conains a syntax error in line 9 of include /PYXXFO?ZPS_TPI_01_PAYR.
I have already apply note 878168 but it is not work.
Please advise me.
Thank you,

hi,
can you let me know for which country are you trying to generate the HR form for payslip?
There are certain countries for which payslip isnt supported.
For such countries you get a similar error.
Thank you,
Jose

Syntax error in standard SAP program.

Similar Messages

Maybe you are looking for