Sys.dba_objects where status = 'INVALID' ?

I've run a quick sql looking for invalid objects within the sys.dba_objects table, My question is, I have a lot of IAL View/Tables that are invalid (in the status column it states 'INVALID').. But I’m able to query over these tables/views? So why is it stating 'INVAILD' what's making it invalid...

Pl post the output of your SQL statement (select owner,object_type,substr(object_name,1,30) object_name from sys.dba_objects where status='INVALID')
The synonyms may be invalid because the target objects they reference may have been dropped - in that case utlrp.sql will not fix your issue
HTH
Srini

Similar Messages

SELECT OBJECT_NAME FROM DBA_OBJECTS WHERE STATUS = 'INVALID'; = 39 rows .

We just applied "SAP Bundle Patch 10.2.0.4.5 - 201010" in our development system.
We completed all the post installation activities.
In tail end - when we execute subjected command, 39 rows returned.
Very First --- May we understand What is the negative impact on Oracle system?
Secondly -- Do we need to make these rows to "ZERO" is must ?
Finally - How to make them to "ZERO"
2 lines expert advise...will enable us to move forward.
Rgds
==========
COMMAND
==========
SQL> SELECT OBJECT_NAME FROM DBA_OBJECTS WHERE STATUS = 'INVALID';
OBJECT_NAME
LOGMNR_KRVRDLUID3
DBMS_SQLTCB_INTERNAL
DBMS_LOGMNR_FFVTOLOGMNRT
DBMS_LOGMNR_OCTOLOGMNRT
DBMS_RULE_EXP_UTL
DBMS_LOGSTDBY
DBMS_AW_EXP
DBMS_SNAP_INTERNAL
DBMSOBJG_DP
DBMS_REPCAT_EXP
DBMS_STREAMS_TBS_INT_INVOK
DBMS_FILE_GROUP_UTL
DBMS_FILE_GROUP_UTL_INVOK
DBMS_STREAMS_MT
DBMS_LOGREP_EXP
DBMS_LOGREP_IMP
DBMS_STREAMS_RPC
DBMS_STREAMS_DATAPUMP
DBMS_STREAMS_DATAPUMP_UTIL
DBMS_STREAMS_TBS_INT
DBMS_STREAMS_TBS_INT_INVOK
DBMS_STREAMS_TABLESPACE_ADM
DBMS_FILE_GROUP_UTL
DBMS_FILE_GROUP_UTL_INVOK
DBMS_FILE_GROUP
DBMS_FILE_GROUP_INTERNAL_INVOK
DBMS_FILE_GROUP_EXP
DBMS_FILE_GROUP_IMP_INTERNAL
DBMS_REDEFINITION
DBMS_CDC_DPUTIL
LOGMNR_KRVRDREPDICT3
DBMS_CDC_DPUTIL
DBMS_CDC_EXPDP
DBMS_CDC_EXPVDP
DBMS_CDC_IMPDP
DBMS_SCHEMA_COPY
UTL_RECOMP
DBMS_SQLTUNE_INTERNAL
DBMS_CDC_DPUTIL
39 rows selected.
SQL>
==========

Hi,
there has been an issue with an earlier set of bugfixes or an older CPU patch.
It did invalidate the catproc component.
Check: select comp_id,status, version from dba_registry;
if CATPROC is invalid, shutdown and startup your DB.
run
@?/rdbms/admin/catproc.sql
it can run between 10 and 25 minutes depending on horse powers.
Check again: select comp_id,status, version from dba_registry;
CATPROC should now be valid.
If yes run utlrp.sql again and your errors will be gone.
If not, your issue is something else.
Volker

How to find out the projects with status "Invalid"?

I'm new to Oracle Projects -OP. We are on 12.0.4. This' my new job.
I have a task of "Remove projects with status 'Invalid' ".
Questions:
How to access the OP forms to verify the existent of the invalid projects?
What are the PA tables having the status info -- I mean those showing the status with 'Invalid'?
Thanks A lot.
an apps dba

I could not find a sample for the DELETE_PROJECT. I have coded the delete project by modifying the sample of the CREATE_PROJECT.
-- delete a project with the status INVALID shown in pa_project_statuses.project_status_name
--set serveroutput on size 20000
DECLARE
-- Variables needed for API standard parameters
l_api_version_number          NUMBER := 1.0;
l_commit               VARCHAR2(1) := 'F';
l_return_status          VARCHAR2(1);
l_init_msg_list          VARCHAR2(1) := 'F';
l_msg_count               NUMBER;
l_msg_index_out          NUMBER;
l_msg_data               VARCHAR2(2000);
l_data               VARCHAR2(2000);
l_pm_product_code          VARCHAR2(10);
l_responsibiity_id          NUMBER;
l_user_id               NUMBER;
l_pm_project_reference     PA_PROJECT_PUB.PROJECT_IN_REC_TYPE;
l_pa_project_id          PA_PROJECT_PUB.PROJECT_IN_REC_TYPE;
API_ERROR               EXCEPTION;
BEGIN
-- GET GLOBAL VALUES
select user_id, responsibility_id
    into l_user_id, l_responsibiity_id
    from pa_user_resp_v
   where user_name = 'J23N';          -- need to get from Apps
--SET GLOBAL VALUES
    pa_interface_utils_pub.set_global_info(
    p_api_version_number     => 1.0,
       p_responsibility_id     => l_responsibiity_id,
       p_user_id          => l_user_id,
    p_msg_count          => l_msg_count,
       p_msg_data          => l_msg_data,
       p_return_status          => l_return_status);
-- PRODUCT RELATED DATA
l_pm_product_code := 'R_INVALID';           -- can be user defined
-- PRODUCT DATA (PROJECT_IN_REC_TYPE)
   l_pm_project_reference.pm_project_reference := null;
   l_pa_project_id.pa_project_id := 1001;
--INIT_CREATE_PROJECT
--pa_project_pub.init_project;
dbms_output.put_line('Before delete_project');
--DELETE_PROJECT
pa_project_pub.delete_project(
     p_api_version_number => l_api_version_number,
     p_commit                    => l_commit,
     p_init_msg_list         => l_init_msg_list,
     p_msg_count                => l_msg_count,
     p_msg_data                  => l_msg_data,
     p_return_status         => l_return_status,
     p_pm_project_code       => l_pm_product_code,
p_pm_project_reference => l_pm_project_reference,
p_pa_project_id         => l_pa_project_id
-- Check for errors
if l_return_status != 'S'
then
    raise API_ERROR;
end if;
dbms_output.put_line('Deleted Project Id: ' || l_pa_project_id.pa_project_id);
--dbms_output.put_line('Deleted Project Number: ' || l_project_out.pa_project_number);
Commit;
--HANDLE EXCEPTIONS
-- Get the error message that were returned if it did not complete sucessfully
EXCEPTION
When API_ERROR then
    dbms_output.put_line('An API_ERROR occurred');
    if l_msg_count >= 1
    then
      for i in 1..l_msg_count loop
        pa_interface_utils_pub.get_messages(
          p_msg_data      => l_msg_data,
          p_encoded     => 'F',
          p_data           => l_data,
          p_msg_count      => l_msg_count,
          p_msg_index_out => l_msg_index_out);
        dbms_output.put_line('error message: ' || l_data);
      end loop;
      rollback;
    end if;
When OTHERS then
    dbms_output.put_line('An error occured, sqlcode = ' || sqlcode);
    if l_msg_count >= 1
      then
      for i in 1..l_msg_count loop
        pa_interface_utils_pub.get_messages(
          p_msg_count      => l_msg_count,
          p_encoded     => 'F',
          p_msg_data      => l_msg_data,
          p_data           => l_data,
          p_msg_index_out => l_msg_index_out);
        dbms_output.put_line('error message: ' || l_data);
      end loop;
      rollback;
    end if;
END;Can anyone with the experience of PA_PROJECT_PUB make comment on this Delete Project block? On the struncture level is it correct?
I run it and get
pa_project_pub.delete_project(
ERROR at line 48:
ORA-06550: line 48, column 3:
PLS-00306: wrong number or types of arguments in call to 'DELETE_PROJECT'
ORA-06550: line 48, column 3:
PL/SQL: Statement ignored
Please make your comment on the structure (the logic) of the delete project before providing the advice on the debug.
I would like to make sure the logic is correct first.
TIA

Table name where status of any ticket is stored

Hi All,
Can Anybody tell me the name of table where status of any ticket is stored in CRM Interaction center?
Thanks in Advance
Regards,
Amit

Hi Amit,
The table is CRM_JEST. This table accepts your document GUID in OBJNR field.
Kind regards.

Differences between SYS.ALL_OBJECTS and SYS.DBA_OBJECTS

Hi All
I'm a beginner to ORACLE :)
when I login as sysdba, and issue below sql:
select count(*) from sys.dba_objects;
COUNT(*)
71596
select count(*) from sys.all_objects;
COUNT(*)
70772
Shouldn't it be equal? what is the objects that sys.all_objects can not see?
Thanks
Emily

On my XE databases, related objects are LOBs, database links and queue:
SQL> select owner, object_type from (select * from dba_objects minus select * from all_objects) group by owner, object_type;
OWNER                          OBJECT_TYPE
TSMSYS                         LOB
CTXSYS                         LOB
PUBLIC                         DATABASE LINK
MDSYS                          LOB
XDB                            LOB
CTXTEST                        LOB
OUTLN                          LOB
FLOWS_020100                   LOB
FLOWS_FILES                    LOB
SYSTEM                         QUEUE
SYSTEM                         LOB
OWNER                          OBJECT_TYPE
TEST                           LOB
12 ligne(s) sélectionnée(s).It is possible that this difference exists because you cannot grant object privilege for these object types. For example, a LOB belongs to another database object generally a table: you cannot run "CREATE LOB" or "GRANT ... ON <LOB> TO ...".
Edited by: P. Forstmann on Jun 12, 2009 9:52 AM

Package Body SYS.DBMSOBJG - status invalid

I have created two database version 8.1.7.0.0 on WindowsNT 4.0 SP5.
One package body DBMSOBJG under SYS is invalid and the status remains same even after compilation. The source is wrapped. How can i turn it to valid. Till time i have not experienced any problem with database but don't know the future implecations because of this invalid package body.
Regards

Pl detail how you upgraded to EE version
https://docs.oracle.com/cd/E11882_01/server.112/e23633/intro.htm#UPGRD12355

Using regexp_instr in a where clause - invalid relational operator

Whey I try to run this query in TOAD I get an ORA-00920: invalid relational operator error. It's part of a 10g stored procedure. When I highlight it and run it it prompts me for the missing values and then the error pops up. The AND in line 4 is highlighted.
select CRIME_CLASSIFICATION_ID, crime_type, nvl(count(CRIME_CLASSIFICATION_ID),0) as CRIMECNT
From vaps.vw_offenses
    where regexp_instr(valoc,to_char(location_id))
        AND ( fromdate is null or
         offense_date between to_date(fromdate, 'mm/dd/yyyy') AND to_date(todate,'mm/dd/yyyy')
group by crime_classification_id, crime_type

Hi,
Review what REGEXP_INSTR does: it returns a NUMBER.
Your WHERE clause couldn't make any sense if you used any other kind of NUMBER expression in that place, e.g. a NUMBER literal such as 12:
select CRIME_CLASSIFICATION_ID, crime_type, nvl(count(CRIME_CLASSIFICATION_ID),0) as CRIMECNT
From vaps.vw_offenses
    where 12     -- This is obviously wrong
        AND ( fromdate is null or
         offense_date between to_date(fromdate, 'mm/dd/yyyy') AND to_date(todate,'mm/dd/yyyy')
group by crime_classification_id, crime_type
It's not going to work any better with a function (like REGEXP_INSTR) that returns a NUMBER.
How can you fix it? That depends on what you want to do. Why are you calling REGEXP_INSTR? What is that condition checking?
Whenever you have a problem, please post a little sample data (CREATE TABLE and INSERT statements, relevant columns only) from all tables involved, so that the people who want to help you can re-create the problem and test their ideas.
Also post the results you want from that data, and an explanation of how you get those results from that data, with specific examples.
Always say which version of Oracle you're using (for example, 11.2.0.2.0).
See the forum FAQ: https://forums.oracle.com/message/9362002

Intermedia Status Invalid after 10.1.0.4 patchset

I just installed the 10.1.0.4 patche set 2. At the end of the 7.4.2 Upgrade the Release 10.1 Database it shows Oracle interMedia's status is INVALID. How can I find out what's causing the INVALID status and more importantly how can I fix it?
Thanks in advance
Brian
PS. Oracle Expression Filter is also INVALID.

Never mind....
I ran the @ORACLE_BASE\ORACLE_HOME\rdbms\admin\utlrp.sql and those database components are now VALID
Brian

Redo logs status - Invalid

I have added new members to my redo log groups. However, when checking the redo log members' status, all the new members have a status of "Invalid" even after restarting the database.
I have checked that the physical files of the new members are created properly in the directory which is owned by the dba account. The rights are all correct.
Now, I am unable to drop these new redo log members and am at a loss of how to change the status to "Stale" or "Inactive".
Please advise.
Thank you.
Regards,
Dara.

Thanks, guys! It works after performing a log switch.
BTW, I have an error which I am not sure if by adding new members work or is the member really corrupted. Please advise.
The error is :
ORA-00313: open failed for members of log group 1 of thread 1
Thank you.
Regards,
Dara.

Database registry status invalid

hi
I got status of catproc as invalid in my dba_registry.
I have tried with (DBMS_REGISTRY_SYS.VALIDATE_CATPROC)
procedure but not posative.
I have also used catproc.sql script but agian no effect.
Is there any way to make it valid?

Pl post details of OS and database versions. Have you opened an SR ? Pl see if these MOS Docs can help
560893.1 - Oracle Xml Database Invalid On Dba_registry
1105245.1 - XDB Is INVALID In DBA_REGISTRY After Having Revoked Privileges: What Privileges Are Needed?
753041.1 - How To Diagnose Components With NON VALID Status In DBA_REGISTRY After an Upgrade
HTH
Srini

Company upgrade status invalid

Hi Experts
I am upgrading a database from SAP 2007 to 8.81PL05. During the testing stage of the upgrade wizard, it returns an error: company upgrade status is invalid. the sap note is 1343073.
Your assistance would be greatly appreciated.

HI
As per the SAP note 1343073,
Make sure that you are upgrading the backup of the original database but not a database that has already gone through an upgrade process.
If you are upgrading the original database, but still receive this error message, create a message under the component "SBO-BC-UPG" and ask for support from SAP. Attach to the message the link to the upgrade log file.
Find the upgrade log file in the default log folder at "%USERPROFILE%\Local Settings\Application Data\SAP\SAP Business One\Log\UpgradeWizard", or from other folders that have been configured in "B1_Install_Folder\Conf\b1-config-path.txt".
Edited by: kambadasan on Jun 30, 2011 7:16 AM

Neuer B50-30 mit CLFS.Sys Corrupt/Missing Status: 0xc0000098 fehler

ICh habe gerden einen neuen Lenovo B50-30 mit FreeDOS bekommen. Da keine Installation CD dabei war habe ich mir eine Windows 7 Professional ISO runtergeladen und auf einen Bootfähigen USB Stick gezogen. Wenn ich jetzt über den USB Stick Boote kommt der Fehler CLFS.sys Corrupt or Missing Status 0xc0000098. Es wird vorgeschlagen im Bios auf Windows Reparieren zu gehen diese option besteht aber nicht da ja noch garkein windows auf dem Computer. Was kann man da tun? PS. Ich habe keine Recovery CD

IAstoreA.sys bluescreen / where to get drivers? [GT70 0nd]

Hey guys,
i just wanted to mount an .iso with WINcdemu and got an bluescreen right after the mounting (IAstoreA.sys) so i've read around and figured it out it has something to do with "RAID"?!
So i wanted to take a look on the MSI site but.. for my laptop the site isnt there anymore :O
Where to get the drivers for the RAID now?
System:
Win7 x64
MSI GT70 0nd

Quote from: 4g63pilot on 17-February-14, 04:23:17
Thanks Zipper. Its odd that they don't have that when you look at the US site. The other odd thing is the driver version they have for download is the same that came loaded 311 from almost a year ago. On the NVidia site they have version 334 I think. Shouldn't they have a newer version on the MSI site ? Thanks for any help.
Most manufacturer's will, from time to time, post updated drivers. But it tends to be rare. Because that also means quite a bit on their end, such as testing, verification, etc...for every laptop model, and every new driver.
In the end, it's too costly and time consuming for them to release a new, authorized, official driver everytime one gets updated.
Use the ones from NVidia's site, they should work just fine.
As far as IAstoreA.sys, that driver is actually related to Intel's chipset/RAID driver and has nothing to do with the video card.
I would consider checking Intel's website for a new chipset/RAID driver for your notebook.

INVALID dba_objects

Hy!
I just imported a database dump file an have a lot of invalid dba_objects:
select count(*) from dba_objects where status='INVALID';COUNT(*)
15094
I just found that
- utlrp.sql
or
shutdown immediate
startup migrate
catpatch.sql
or
/rdbms/admin/dbmsaw.plb
should work but none of this scripts helped.
Any ideas ?

Well that worked, but the aplication still does not work.
Error message:
ORA-04068 existing state of packagesstringstringstring has been
discarded
Cause: An error occurred when attempting to execute a stored
procedure.
Action: Refer to the accompanying messages and fix the error
mentioned. Try the procedure again after proper reinitialization of
any application's state.
ORA-06508 PL/SQL: could not find program unit being called
Cause: An attempt was made to call a stored program that could not
be found. The program may have been dropped or incompatibly modified,
or have compiled with errors.
Action: Check that all referenced programs, including their
package bodies, exist and are compatible.
ORA-06512 at string line string
Cause: Backtrace message as the stack is unwound by unhandled
exceptions.
Action: Fix the problem causing the exception or write an
exception handler for this condition. Or you may need to contact your
application administrator or database administrator.

Invalid object in 10.1.0.5 -- DBMS_AQADM

Hi,
My oracle DB in version 10.1.0.5 has the below component invalid.I checked the objects invalid and I tried running utlrp but it it didnt work. Please help me in validating it.
Please find the objects invalid
SQL> select OWNER, OBJECT_NAME, OBJECT_TYPE, STATUS
2 from dba_objects where STATUS = 'INVALID';
OWNER OBJECT_NAME OBJECT_TYPE STATUS
SYS DBMS_AQADM PACKAGE BODY INVALID
SYS KUPV$FT PACKAGE BODY INVALID
SYS AQ$_KUPC$DATAPUMP_QUETAB_V EVALUATION CONTEXT INVALID
WK_TEST BIN$rV2MSWH5SSe+t6WKFsMQQQ==$0 TRIGGER INVALID
SYS AQ$_KUPC$DATAPUMP_QUETAB_E QUEUE INVALID
SYS AQ$KUPC$DATAPUMP_QUETAB VIEW INVALID
SYS IMP_STUDYLOCATION_ENROLL VIEW INVALID
SYS IMP_SUBJECTVISIT VIEW INVALID
SYS KUPC$DATAPUMP_QUETAB TABLE INVALID
SYS SYSNTUGypmMHGQyGzApQEYs7BRg== TABLE INVALID
SYS SYSNTLNBZe0tCRU+uwwRmfpPVIg== TABLE INVALID
SYS SYSNTuP8itE4/RVCHChLM1U8zxQ== TABLE INVALID
12 rows selected.
and the invalid components are
Oracle Data Mining INVALID
Oracle Database Packages and Types 10.1.0.5.0 INVALID
Regards
Sudhakr.M

user13423325 wrote:
Hi,
My oracle DB in version 10.1.0.5 has the below component invalid.I checked the objects invalid and I tried running utlrp but it it didnt work. Please help me in validating it.
Please find the objects invalid
SQL> select OWNER, OBJECT_NAME, OBJECT_TYPE, STATUS
2 from dba_objects where STATUS = 'INVALID';
OWNER OBJECT_NAME OBJECT_TYPE STATUS
SYS DBMS_AQADM PACKAGE BODY INVALID
SYS KUPV$FT PACKAGE BODY INVALIDdo as below the COPY results & PASTE back here
SQL> connect / as sysdba
Connected.
SQL> alter package DBMS_AQADM compile;
Package altered.
SQL> show error
No errors.
SQL>

Sys.dba_objects where status = 'INVALID' ?

Similar Messages

Maybe you are looking for