System assigning Contact Number before saving the contact

Hi ,
In CRM Dev client and CRM QA system is assigning Number for the
contact (Business Partner) before saving the contact in webui.
Because of this, system is updating the Contact created time in BUT000
as the Number assignement time and not the actual contact saved
time.
(Whereas in CRM PROD client its not behaving as indicated above and
its assigning Number after saving and its fine).
Pl suggest the possibilities to avoid early number assignment and surprised its happening in only Dev and QA.
Regards
Babu

Hi,
Please take a look at this thread.
CRM 7.0 Stop Early Number Assignment for  BP create
Regards,
Parul

Similar Messages

  • User Exits for transaction VF01 before saving the billing document

    Can any one say is there any user exit which exits before saving the billing document since i want to check the net value of the billing with the net value of sales order so that it should not go beyond the total amount specified in sales order.

    J_3RSINV
    SDVFX001  User exit header line in delivery to accounting
    SDVFX002  User exit for A/R line in transfer to accounting
    SDVFX003  User exit cash clearing in transfer to accounting
    SDVFX004  User exit G/L line in transfer to accounting
    SDVFX005  User exit reserves in transfer to accounting
    SDVFX006  User exit tax line in transfer to accounting
    SDVFX007  User exit: Billing plan during transfer to Accounting
    SDVFX008  User exit: Processing of transfer structures SD-FI
    SDVFX009  Billing doc. processing KIDONO (payment reference numbe
    SDVFX010  User exit item table for the customer lines
    SDVFX011  Userexit for the komkcv- and kompcv-structures
    V05I0001  User exits for billing index
    V05N0001  User Exits for Printing Billing Docs. using POR Procedu
    V60A0001  Customer functions in the billing document
    V60P0001  Data provision for additional fields for display in lis
    V61A0001  Customer enhancement: Pricing
    These are the Exits Available in the Package
    Jus try finding which will suffice ur Requirement.
    Regards,
    Mithun

  • Ho to Generate the Numeric Values Automatically before saving the records

    Hello to everybody,
    I have a data block naming “BILL” consisting of the following 3 field.
    1. Sr_No
    2. Bill_Amount
    3. Description
    This Data Block consist 10 records at a time.
    I want that whenever I insert records in the above data block.
    Serial No should automatically be generated.
    For this I have applied the following code in “WHEN-NEW-ITEM-INSTANCE” trigger.
    <CODE>
    SELECT NVL(MAX(Sr_No),0)+1 INTO :BILL.Sr_No FROM BILL;
    </CODE>
    Whenever I insert records in the BILL data block, the first row automatically generates the “Sr_No”, but when I move to the next record, (remember currently I have not saved the record), the same value which appeared in the previous record appears in the Sr_No field.
    For example, when I insert records for the first time in the BILL, the Sr_No field automatically generates value “1”, but when I move to the next record while not saving the first record the next row still generating value “1”, while it should be value “2” and so on.
    Note that I want that before saving the previous record when I move to the next row, the Sr_No should generate the next continuous value like in example.
    Please help me to solve out this problem.

    You have practically scratched you left ear with your right foot while jumping on the left foot :-)
    Seriously, you guys don't need to go to all this trouble.
    If you want a serial number incrementation, all you need to do is to either select the max value + 1 from the table or select the next value from a sequence in an PRE-INSERT trigger on block level, and that's it!!!!
    Tony

  • Could you pls help on  use exits   before  saving  the contract .

    i want to check the limitatin  before  saving the contract  in sap banking.
    for  contract creation  tcode is  FN1V or FNV1.
    Could you pls tell me the   use exits  if knows  anybody
    advance thanks.

    Hi Diva,
    use this exit.
    EXIT_SAPLFVDA_002
    if this is not suitable for u r req then go to SMOD press f4 then click on Information systems give FVVD in package then press enter.there u will get no of enhancement. search for u r rlant.
    Thanks

  • How to get sales order number before saving in VA01 by using parameter

    Hi,
    Please let me know how to get sales order number in transaction VA01 before saving it by using parameter in SU3.
    I tried to set parameter in SU3 "AUN", but it is not working as required, means sales order number is not appearing before saving.
    can you please suggest how to do it?
    Thanks & Regards.
    Rahul Verulkar

    Hi,
    In case of Support project, we get the high severity issues from users and needs to be closed withn 2 hours... so what we do we get the requirement from user and checking the same in production from our id, but we can not save the sales order as we are not authorized to do the same, so in such cases it is required to get the sales order number before saving... where we can guide the users.... but actuallly it is not getting saved in the table until and unless u save it manually. It works like a material master... when u create material master, the material number appears in advance in material number field "MATNR"
    If it is possible can you please suggest step by step to work on parameter in SU3 for sales order number before saving.
    Thanks & regards,
    Rahul Verulkar

  • Validation of Item Values before saving the form

    Hi,
    I have requirement in Oracle Forms, we give header information as per the requirement and the lines info of the specific header. In lines whe have two feild as type and amount. If the type is 'E' then we need to sum up the amount value as credit and if type is 'F' we need to sum up of those feild values as Debit and before saving the form we need to check the sum of Credit and Debit is equal or not if equal then we should allow to save the form else it should not. We can have multiple lines under single header..Can any body help on this..Its very emergency..
    Thanks,
    Maggi.

    Hi,
    In Customer-exit ILOM0001 read table IMPT_BUF[] from sap stack. It contains all enteries of measuring points.
    Use below mentioned code in above exits for your reference.
    FIELD-SYMBOLS : <fs_impt> type ANY TABLE.
    data : tab_impt type TABLE OF impt.
    ASSIGN ('(SAPLIMR0)IMPT_BUF[]') to <fs_impt>.
    if sy-subrc is INITIAL.
      tab_impt = <fs_impt>.
    endif.
    table TAB_IMPT is filled wilth all entries of measuring point while creating and changing functional location.
    Thanks,
    Vijay

  • Restrict Duplicate entry of record before saving the form

    Hi!!
    I need to validate duplicate entry of ITEM CODE before saving the FORM. Which means, if I have entered an ITEM CODE in a row, the same ITEM CODE should not be allowed to be entered in any other rows. It should throw an error message and should ask to enter another ITEM CODE instead. I did not get the correct logic from the threads.
    Regards
    Mitto

    hey i have a requirement that to restrict duplicate entry in both block(both multi record).the blocks are DEPT(MATER)
    EMP(DETAIL)
    the associated fieds in master block DEPT.DEPT_NO,in detail EMP.EMP_ID .
    I have done' Kevin D Clarke’s calculated item ' both in master and detail block
    its working fine for master block but in case of detail block its only respond to the current session(i.e. if the new value is inserted or save it will restrict another record to be inserted of that last record's value),it does not restrict duplicate value enter ,checking with other existing records(which are saved in earlier session,though after query it is shown on the form)
    can anyone guide me why its not working

  • In VF01, before saving the billing document, can we use "issue output to"

    In VF01 transaction before saving the billing document, can we use "issue output to" under Billing Document in Menu.
    i.e., can we enable the option "Billing Document -> Issue output to -> Issue output to"

    Hi,
    No as a standard, unless the billing document is created and released to accounting, you can't use issue output to.
    Regards,

  • How to validate plan data before saving the data

    I have a total row in my planning layout which is a summation of plan data in 2 other rows. While saving the data, I should check whether the total is 200 and if not the data should not be saved. How can I achieve this! Any help would be appreciated.
    Regards,
    Tipo.

    Hi,
    I'm also facing the same problem in my development...I tried above all the ways,but we cannot stop saving the wrong data.In this case you have to write the java script for save button, before saving the data if it is correct then go for the next step to save other wise throw an error message or without save the data .
    You need to write the JAVA script for save button,in this code you need to read the data form the layout and check the total value, i am not sure if layout is dynamic how we can achieve this???.
    My development also stopped for this issue,In my case i  have two layouts ,one is for actual and another one is for Planing layout(Function - Distribution equally),using the fox code i succeed to read and throw an error message for incorrect data but i can not stop to saving for incorrect total data.
    Once you solved this problem please post the message in SDN.This type of requirements is very tough and we need to share to our friends.
    Thanks.

  • InCopy workflow in InDesign: Is there a way to find the document in which an ICML file has NOT been checked IN again before saving the doc?

    The situation:
    We are working with the InCopy feature (checking in and checking out ICML files).
    The problem:
    I might have saved a document with an ICML file still checked out.
    The question:
    Is there a way to find out which document was saved with the ICML file still checked out?
    or in other words:
    Is there a way to find the document in which an ICML file has NOT been checked IN again before saving the doc?
    Thanks for any help!

    Hello Sumit Singh,
    thank you for your answer and your reasonable recommendation. Unfortunately, this only works when the ICML content is used in one INDD file. In our case, we use ICML content in multiple docs (various manuals with the same safety instructions, warranties, adresses etc.).
    So, is there a way to trace back where an ICML has been used?
    Is it possible to find out in which document the ICML is still checked out?

  • I accidentally threw away the box with my serial number before registering the product. I am new to adobe so I didn't realize I would need it. Is there a way to track down my number?

    I accidentally threw away the box with my serial number before registering the product. I am new to adobe so I didn't realize I would need it. Is there a way to track down my number?

    Barbara B. wrote:
    There is one faint glimmer of light. Depending on where you bought PSE you might have gotten a redemption code rather than a serial number. If you didn't also throw away your receipt, check that for a code. Then go here, if you find one:
    Redemption Code Help
    But otherwise, I'm afraid you are out of luck, sorry.
    Barbara,
    It has been months since I visited here.  Your patience is still intact!  I have your wonderful PSE 11 book on my Kindle now.  Thanks for the good work.

  • Get purchase order number before saving

    Hi All,
    I am working on Purchase order Creation.
    I want to know the purchase order number before it was saved.
    I have used NUMBER_GET_NEXT function Module.But it is based on Number range.
    I dont want to get based on Number Range.
    I want to get the Get next number based on the Documnet TYpe.
    Is there any possiablity to get that.If yes please let me know.
    Thanks,
    Swapna.

    Hi,
    data : lv_ebeln type ebeln.
    Select single MAX( EBELN ) from EKKO into LV_EBELN.
    Next PO Number =  LV_EBELN + 1.
    Try this.
    This will work if maintain only one number rage object for PO Number.
    Thanks,
    Durai.V

  • Sending New Requirement date to APO before saving the sales order in ECC

    Hi Experts,
    i have a requirement where while creation of sales order, when user enters the requirement date,i have to calculate the new requirement date ( adding transit time and other time ) and send it to APO , to bring the ATP result based on this new calculated date.
    This new calculated date is getting saved in Z field in VBAP table and also this new requirement date which has to be pass to APO is getting calculated while saving the doucment i.e. at user exit - USEREXIT_SAVE_DOCUMENT_PREPARE.
    Now, i am not sure, how i should pass this new date to APO , which FM , Badi or BAPI would be used ?
    Please help and let me know if i am supposed to detailed it a little more.
    Thanks.

    Hi Bharat,
    Normally the new calculated requirement/delivery date will be updated in APO through the CIF.
    However you can influence the transfer with enhancement CIFSLS03 (influence sales-order-specific data directly before it is sent to SAP APO available on ECC side).
    Please see the below description.
    Thanks.
    Regards, Marius
    In this enhancement, you can transfer customer-order-specific data to SAP
    APO.
    The associated component EXIT_SAPLCSLS_002 provides you with tables that are
    required for the transfer. In particular, these are:
    Requirements table ET_SL_REQ
    Item table ET_SL_DOC
    Field catalog ET_ATPFIELD
    You can use this exit to create or change documents in the ERP system as well
    as for the initial data transfer.
    The data is transferred to SAP APO after this exit is called.
    Notes
    If you use program /SAPAPO/CIF_DELTAREPORT3, you have to add the
    corresponding logic to function module EXIT_SAPLCID3_001. For more information,
    see the documentation for
    enhancement CIFCID3.
    Programs /SAPAPO/CIF_DELTAREPORT and /SAPAPO/CIF_DELTAREPORT2 also run this
    exit.

  • Assign a number range to the transaction in Logistics Invoice Verification

    Hi Experts,
    There are two transaction types (RS and RD) in Logistics Invoice Verification.  We have assigned number range 01 to them.
    Is it possible to assign multiple number range to a transaction type in Logistics Invoice Verification? If yes, how to do it?
    Is it possible to create other transaction types? If yes, how to do it, and any risk?
    Appreciate your advices. Thanks.
    regards,
    April

    Hi April,
    Im afraid it is not possible to set more than one number range to a transaction/document
    type. To create different transaction/document types you can do this in transaction OBA7.
    Then to set what default document types are used in a transaction you can set this in OMR4.
    There should be no risk in creating extra document types as long as the description of each
    one you create is clearly documented. For more info on number range assignment check out
    notes 452127, 193020 and 62077.
    Hope this helps.
    Best regards,
    Adam.

  • Read the Current BP number before saving

    HI Experts,
    From the Identification tab iam creating the BP by entering all the mandatory fields and then i click on END button instead of "Save" so on this END button event i want to read the current BP which is not yet saved in the database.
    Iam writting the logic of END button in the IF_CRM_IC_PREPARE_FOR_CALLBACK~EXECUTE method of the Main View set(IUICMD/MainVS).
    data: zv_core    TYPE REF TO cl_crm_bol_core,
             zv_entity TYPE REF TO cl_crm_bol_entity_manager,
             zv_core = cl_crm_bol_core=>get_instance( ).
             CALL METHOD zv_core->get_entity_manager
               RECEIVING
                   rv_result = zv_entity.
    In Debug mode when i check the ZV_ENTITY in that there is one Private Attribute ENTITY_TAB of type Sorted Table where i can see 3 entries with OBJECT_NAME as "BuilHeader","BuilContactPerson", "BuilStandardAddress" when i check the Entity reference of ""BuilHeader" iam getting the current BP number. But how to read this entity iam not getting this.???
    I tried the below way..
    LOOP AT zv_entity->entity_tab ASSIGNING <itab>.
    ENDLOOP.
    But it says that "Access to private attribute "ENTITY_TAB" is not allowed."..
    Regards.

    Hi Hemant,
    As you are implementing your method in overview set , try to access the view controller where the BP ID is created by rereading the entity.
    DATA: lv_viewname TYPE string,
            lr_viewctrl TYPE REF TO cl_bsp_wd_view_controller.
      lv_viewname = me->get_viewarea_content( '<View Area of your view>' ).                            
      IF lv_viewname IS NOT INITIAL.
        lr_viewctrl = me->get_subcontroller_by_viewname( lv_viewname ).
        IF lr_viewctrl IS BOUND.
          TRY.
              CALL METHOD lr_viewctrl->('<method_name>')   .
               CATCH cx_sy_dyn_call_error.
              RETURN.
          ENDTRY.
        ENDIF.
      ENDIF.
    Regards,
    Nithish
    Edited by: nithish P on Feb 7, 2012 2:32 PM

Maybe you are looking for