Sending New Requirement date to APO before saving the sales order in ECC

Hi Experts,
i have a requirement where while creation of sales order, when user enters the requirement date,i have to calculate the new requirement date ( adding transit time and other time ) and send it to APO , to bring the ATP result based on this new calculated date.
This new calculated date is getting saved in Z field in VBAP table and also this new requirement date which has to be pass to APO is getting calculated while saving the doucment i.e. at user exit - USEREXIT_SAVE_DOCUMENT_PREPARE.
Now, i am not sure, how i should pass this new date to APO , which FM , Badi or BAPI would be used ?
Please help and let me know if i am supposed to detailed it a little more.
Thanks.

Hi Bharat,
Normally the new calculated requirement/delivery date will be updated in APO through the CIF.
However you can influence the transfer with enhancement CIFSLS03 (influence sales-order-specific data directly before it is sent to SAP APO available on ECC side).
Please see the below description.
Thanks.
Regards, Marius
In this enhancement, you can transfer customer-order-specific data to SAP
APO.
The associated component EXIT_SAPLCSLS_002 provides you with tables that are
required for the transfer. In particular, these are:
Requirements table ET_SL_REQ
Item table ET_SL_DOC
Field catalog ET_ATPFIELD
You can use this exit to create or change documents in the ERP system as well
as for the initial data transfer.
The data is transferred to SAP APO after this exit is called.
Notes
If you use program /SAPAPO/CIF_DELTAREPORT3, you have to add the
corresponding logic to function module EXIT_SAPLCID3_001. For more information,
see the documentation for
enhancement CIFCID3.
Programs /SAPAPO/CIF_DELTAREPORT and /SAPAPO/CIF_DELTAREPORT2 also run this
exit.

Similar Messages

  • Send Mail to Customer while saving the Sales Order

    Dear Friends,
    My Requirment is to send the mail to Customer automaticaly when create any Sales Order.
    While sending the mail given three points reqired.
    1.     Send the attachment of Order Conformation along with the mail.
    2.     There must be The title text as "Order Confirmation refrence of your PO <Customer PO No> <PO Date>"
    3.     There must be some body text like some terms and conditions with variables of Order data.
    Can any body help me one this step by step.
    Kindly suggest me how to do this.
    Thanks in Advance.
    D Tarun Kumar
    Moderator message : Spec dumping not allowed, duplicate post. Thread locked.
    Edited by: Vinod Kumar on Jul 12, 2011 11:30 AM

    While saving the sales order through Va01 and Va02 and email has to send

  • While saving the sales order through Va01 and Va02 and email has to send

    Hi Experts,
    My requirement is to send an email with PDF formatted display of the Sales order to the sold to party's email id while saving the Salesorder through Va01 and Va02.
    I need the following .
    How to send an email with PDF formatted attachment of Salesorder display ? (we have done the formatting of display through SMARTFORMS )
    I think we can do it by userexits program name is MV45AFZZ while saving the document.
    Please suggest me the best possible way.
    Thanks ,
    Saritha

    Hi, there is no need for a customer devlopment on this. A standard smartform output will do with output medium '5' (external send). Then the smartform output will be send as PDF to the e-mail address in the output partner. Have a look at transaction NACE.
    Regards Jack

  • Inserting Pricing condition in Sales order when saving the sales order

    Dear ABAPers,
           My customers requirement is when saving the sales order new pricing condition has to be updated in the line item.for this i am using the User Exit 'USEREXIT_SAVE_DOCUMENT_PREPARE' ( MV45AFZZ).While saving the Sales order i am calculating the Price and updating in the Pricing conditions.
    In XKOMV internal table i am appending the pricing condition.But the problem is ,it is not calculating the taxes and it is Updating in VBAK and VBAP.
    How to do this.
    Thanks & Regards,
    Ashok.

    Dear ABAPers,
    I have Solved this Problem.
    Thanks & Regards,
    Ashok.

  • Different message in va01: Defect in ECC6 server while saving the sales order .

    Hi ABAP gurus,
    I am in to upgrade Project In ECC6 server I am getting the different message when saving the sales order in va01 compare to  old sever(4.7) .
    I have to make it to the same message as it is in the 4.7 server.
    plz help me .
    Regards,
    vanamaala kashavena

    Hi,
    IF xvbap-uepos IS INITIAL AND
            xvbap-zzhrs_conf <> 'X'.
            MESSAGE ID 'ZOTC' TYPE 'E' NUMBER '067' WITH
            'Please select Hours Confirmed in Additional data B'(302) 'for item'(303) xvbap-posnr.
          ENDIF.
    this is the code in the  PARTICULAR INCLUDE PROGRAM .
    this is same in both the system ,but in ecc6 server,in message
    popup it is not giving 'Please select Hours Confirmed in Additional data B' .
    it is giving ORDER QTY FORMAT PERIOD (ITEM NUMBER(0010))
    Regards,
    vanamaala k

  • In Sales Order form populate charges field after saving the Sales Order

    Can we populate Charges field in Sales Order form after saving the sales Order automatically.
    The charges to be calculated based on the amount entered and the item selected in Sales Order.
    In the Manual process it is done by hitting the Actions Button and then select the Charges.
    The charge type would be "Freight Costs"

    by using process_order API, I am able to update the charges field.

  • Ps assembly processing:WBS have not be created when saving the sales order

    In the ps assembly processing, I want to generate a network when I create a sales order.  So I did the following steps:
    1-Use the TCODE cj91 to create a standard WBS "E-000007.1".
    2-Use the TCODE cn01 to create a standard network "10000000" and assign the standard WBS "E-000007.1" to it.
    3-Use the TCODE cn08 to config the Network Parameters from Sales Order like below:
    Material number : 600000-000000-0009
    Order Type      : Z301
    Std network     : 10000000
    Class Type      : 020
    Network Profile : Z0001
    MRP Controller  : 001
    Std WBS element : E-000007.1
    4-Use the TCODE va01 to create a sales order and add an item with the material "600000-000000-0009" and save.
        When the SAP R/3 System is saving the sales order, a WBS ought to be created u2013 based on the assignment of the standard network to the standard project.But I could not found the WBS.I thought I have do all of steps and could not found the reason.
       So I need the experts give me some useful advice and reference to resolve the problem.Thank you.
    Regards
    Yoda

    Hi,
    Maintain strategy group in material master MRP tab....
    If problem still persist then check is there any credit block to that customer...if it is release it in VKM3....
    Once you release it will create automatically.
    Regards

  • Regd : Error during saving the  sales order for Variant configuration

    Hi -
    When the item( config material) is saved in the sales order , system scheduled the production order and getting an error as " Posting Rule for Assembly order for item 000010 could not be generated".
    Any solutions regarding the error.

    Hi,
    This is the process of Assembly to order with variant configuration. In material master, you can maintain gen item category 0002 (configurable material) in basic data view, sales 2 view item category grp 0002 and strategy group 82 in MRP 3 view. After creating of material master, BOM & Routing, You can create sales order in VA01 transaction.
    In this VA01, When you create sales order, system will check material availability, capacity checking and system will show variants for each items. And also when you will save the sales order, system will create production order no immdiately.
    So you can maintain the above settings compulsory.
    please let me know any clarification.
    Regards,
    Mohan

  • Error while saving the Sales Order

    Hi experts,
        i am getting a runtime error while saving a sales order stating: SAPSQL_EMPTY_TABNAME. It says the field T681-KOTAB could be empty. I would give in more inputs. Someone plz help.
    Thanks.

    I would expect that KOTN521 would be a Database table defined in the ABAP Dictionary that relates to the condition implemented in 521 for the usage specified in that record.
    You should be able to go into the info system, SE84, and search under ABAP Dictionary / Database Tables to see what KOTN521 is.
    Also, since the only Keys to T681 are KVEWE and KOTABNR, and there are two KOTABNR entries with a value of 521, then there must be two different usages (KVEWE) associated with that table.
    If you see what they are, you can check to see what the usages represent.   Based on a lookup, it appears that a usage of N is for Free Goods, A is for Pricing etc.   In our system, we only have A entries.
    What are the usages for the 521 entries?  Do they relate to Free Goods/Pricing???
    Does the table KOTN521 exist in the ABAP Dictionary?
    Answering these questions may get you closer to the answer.
    Can you compare the values in these entries to what you have in different SIDs?
    Is this problem happening in Production, or is it still in a development or Quality Assurance client?
    If it is still in development or Q, then it may be that a recent customization change was made.
    Compare the entries across your systems, if possible.
    Good luck
    Brian

  • Billing Plan Billing Block Change when saving the sales order

    Dear Gurus,
    We have SD Integrated with PS. We create the sales orders and pull the billing plans milestones from WBS.
    Once we generate the billing plans, system will propose the billing block for all the line items of the milestones which normally comes from the billing plan configuration/item category.
    Would like to know the appropriate userexit to change the Billing block to "XX" if some of the requirements are not met when we create or change the sales document.
    Below is what i am able to see but seems to be not helpfull.. please guide..
    User exits in program RV60FUS1
        BILLING_SCHEDULE_DELTA
        For milestone billing a percentage value is fully invoiced for each billing deadline. In the case of deviations between the original item value and any later changes, you can use the user exit to determine whether the difference should be stored in the final invoice or sent to the next deadline.
        USEREXIT_MOVE_FIELD_TO_FPLT
        This user exit allows you to create your own fields in table FPLT.
        USEREXIT_MOVE_FIELD_TO_FPLA
        This user exit allows you to create your own fields in table FPLA.
    Reward points for the right answers..
    Regards
    Ram

    Dear Friend,
    I hope you can make it with the above user exits.Consult your abaper and try it.
    Thank you,

  • Which settings are required to explode a IPPE in the sales order?

    Dear Guru,
    which settings are required to explode a IPPE-object in the sales order?

    Hi,
    You may check this link.
    http://help.sap.com/saphelp_dimp50/helpdata/EN/9f/71fe40f652f323e10000000a155106/content.htm
    Thanks
    Krish.

  • Billing date is not populating into the sales order

    Hi Experts,
    I am creating the sales orders by filling the IDOC's Segment data from a file. Sales orders are getting created however the BILLING DATE is not getting populated by the date from file instead it is taking the system date.
    Segments used are
    Header: E1EDK03   016  021  and  026.
    Item: E1EDP03  016  021  and  026.
    Please help me in this regard.
    TIA.
    Regards,
    Kishore.
    Edited by: kishore gaddam on Jul 18, 2009 10:06 AM

    Hi,
    Check with function guy , there could be some settings need to be done for getting external date populated in billing date field.
    Thanks,

  • How to get netprice (vbap-netwr) before creting the sales order

    Actually i am using bapi 'BAPI_SALESORDER_SIMULATE'  & iam passing pricing date
    as that entered on selection screen of my report.But in certain cases BAPI fails for eg: When material is not available in stock  it simulates with alternate material. So is there any other way like function module to fetch the net value based on pricing date and other inputs/
    Please help me. It is very urgent!

    Hi,
    I resolved this as following :
    Since, i needed the Manufacturer Serial no. to be fetched in custom field at item level ( Enhanced via EEWB the item  ) , the moment there is a product  available in the sales doc header field.
    I wrote  badi implementation for definition : CRM_ORDERADM_I_BADI and utilized method  : CRM_ORDERADM_I_PRODUCT_DETERM . This method's signature if you check makes me available the header, item guids along with the product available in the field even before i save the sales document. There i fetch the serial number of product from custom table and then poulate the serial no. field in customer_i extension as follows:
      LS_CUSTOMER_I_COM-ZZCUSTOMER_I0803 = LV_MFR_SLNO.
      LS_CUSTOMER_I_COM-REF_GUID    = IV_ITEM.
      LS_CUSTOMER_I_COM-REF_HANDLE  = '0000000000'.
      LS_CUSTOMER_I_COM-MODE        = 'A'.
      APPEND LS_CUSTOMER_I_COM TO LT_CUSTOMER_I_COM.
      LS_FIELD_NAME_CUSTAB-FIELDNAME = 'ZZCUSTOMER_I0803'.
      APPEND LS_FIELD_NAME_CUSTAB TO LT_FIELD_NAME_CUSTAB.
      CALL FUNCTION 'CRM_CUSTOMER_I_MAINTAIN_OW'
        EXPORTING
          IS_CUSTOMER_I_COM    = LS_CUSTOMER_I_COM
    *        IV_EXTERNAL_CALL     = 'X'
        CHANGING
          CT_INPUT_FIELD_NAMES = LT_FIELD_NAME_CUSTAB
        EXCEPTIONS
          ITEM_CHANGE_ERROR    = 1
          ITEM_CREATE_ERROR    = 2
          ERROR_OCCURRED       = 3
          OTHERS               = 4.

  • Error while saving the Sales Order details in EBS R12 Instance

    Hi all,
    After specifying the details of sales order. We are cant save the changes.
    It gives the error like :
    ERROR: AN UNEXPECTED ERROR HAS OCCURRED. PLEASE CONTACT YOUR SYSTEM ADMINISTRATOR.
    Actually system admin was not aware of these error. So can you please advice us to proceed this error.
    Regards,
    Thanvir A

    Wrong thread. This is the Data Guard thread and your problem has nothing to do with Data Guard. Either find the right thread or open a Service Request.
    Larry

  • Error message while saving the sales order

    hi all,
    i have maintained a material material master, sold to  etc  pr00 conditions maintained, schedule line is determined correctly  but i am still getting this message while saving the order
    "Product 234345 does not have schedules assigned. Contact system administrator
    Message no. ZV276"
    can anybody help?
    Sa

    Suman,
    i would suggest you please sit with your abaper he can might be solved your issue.
    because Message no. ZV276 seems to be comes from user-exit which you implement for VA01/VA02 Tx.
    Amit.

Maybe you are looking for