System automatic propose the OK function and user cannot remove in migo_gr

Dear Friends,
Can anyone advice, in configuration of system automatic propose the OK function at the time of goods receipt with reference to PO number by migo_gr and using mvt type u2013 105 & User will not be authorized to remove the tick from ok function.
Thanks in advance.
Madhukar Mittal
SAP-MM Consultant

Hi Antony/ other SAP friends,
Ok function is made default, basic administrator has done setting that anyuser cann't remove default tick of ok function but my requirement is that even user cann't change ok function i.e unticked ok function at item level also at the time of migo_gr.
This is due to BOM explode at the time of goods receipt and user take header material from subcontractor and if child component stock is not available, he removes the child consumption ok function tick and inward header material due to that stock MBLB report and ancillary stock reconciliation problem are facing.
Can anyone advice in this matter.
Thanks
Madhukar Mittal

Similar Messages

Proposal of partner function and related master record in sales order

Hi Gurus,
As we know, a partner determination procedure is used to propose partner functions and the master data tied to them in the sales order.
I need to confirm the following if understanding is correct:
1. 1st a customer master record is entered with all the partner functions, say, SP SH PY BP and 9E (PE partner type).
The respective master record values like who is the SP SH PY BP and 9E are specified in the partner function tab also.
This customer master is assigned to a account group.
2. a Partner determination procedure is created and the same partner functions assigned to it.
Next, this procedure is assigned to the account group.
3. When I create an order for this customer, the sales order's partner function tab should automatically be populated with the partner functions and the respective master data value as defined in the customer master record.
Questions:
1. What if the partner determination procedure was not defined with 9E Partner function but the customer master record is?
2. What if the customer master record was not defined with 9E but the partner procedure is?
3. Why the partner procedure need to define the partner functions if its assigned to account group to which the customer master is assigned to already?
4. If the partner function 9E is not proposed in the sales order, can user manually enter this partner function and the respective master record value in the sales order partner function tab?
Have a great day!
regards
M Russo

Hi,
1. What if the partner determination procedure was not defined with 9E Partner function but the customer master record is?
If the partner determination procedure is not defiend you can not maintain same in customer master the system will through you error message PE is missing.
2. What if the customer master record was not defined with 9E but the partner procedure is?
It depends how you want propose the same,
According the function it behaves, you can make this field is mandatory if you want the same is to customer master
3. Why the partner procedure need to define the partner functions if its assigned to account group to which the customer master is assigned to already?
normally the standard partner procedure follows as it is SP SH BL PY Still if you want add some other partners(agent,employee,contact person...etc.) you can define the same in the procedure.
4. If the partner function 9E is not proposed in the sales order, can user manually enter this partner function and the respective master record value in the sales order partner function tab?
As you can refer the second point if you set as optional you can enter the same in customer master partner function tab.
Hope this can helps,
Thanks and Best Regards,
Muralidharan S

System automatically truncating the data

hi Friends,
i am using jdeveloper 11.1.1.6.0.
i have created field called price it's length is Number(22,12) . whenever user is giving more than 22 digits system is truncating the 22 digit to fractional number.
ex:user input: 1234567980123456789012
system showing: 1.234567980123 .
is there any solution for the above problem.

Hi Johon,
1. Change in your vo query to fetch the price column once more time like price1
2. Change the type from number to string
I think my adf concept are good.
The idea behind this approach is that he has already tried your intelligent suggestion but not working.
I have already faced this problem and solved the same using the technique I shared over this forum.
Please read this to know why system automatically truncating the data
3.1 n-bit Unsigned Integers section
n      Minimum      Maximum
8      0      (2^8)-1 (=255)
16      0      (2^16)-1 (=65,535)
32      0      (2^32)-1 (=4,294,967,295) (9+ digits)
64      0      (2^64)-1 (=18,446,744,073,709,551,615) (19+ digits)
and your trying to save 22 digits.How it is possible?
Got it?
http://www.ntu.edu.sg/home/ehchua/programming/java/DataRepresentation.html
Edited by: 812903 on Mar 21, 2013 11:32 PM
Edited by: 812903 on Mar 21, 2013 11:43 PM

What is the Difference 'VOFM' and 'User-Exit' ?

What is the Difference 'VOFM' and 'User-Exit' ?

If you need to implement any of these User exits, you first create a project for the user exit, then assign the user exit(s) to your project. Then you write the coding for the user exit, and finally activate the project.
For general information about user exits, in the R/3 Library, go to Basis components and look at the Enhancements section. In addition there is detailed information about each user exit that you can access when you assign it to your project (see below).
Activities
Start by creating your project.
1. Enter a name for your project.
2. Select Modification -> Create.
3. Enter a short text for your project and select save.
Next assign the user exit to your project.
4. Select Components.
5. Enter the name(s) of the user exits you want to implement.
6. Select SAP documentation, if you want detailed information on this user exit.
7. Select save.
8. Select back.
Next make your coding modifications.
9. Select enhancement components.
10. Select change.
11. Select the user exit you want to write code for.
12. Select the include zxpbco01.
The system will then prompt you to create this include, and you can continue to write your coding in it.
Next activate your project.
13. Return to the initial screen and select activate project.
Routines
Routines are short sub-programs that carry out various checks during document processing. In the SD module, you can create and process routines for copying requirements, data transfer, requirements and formulas using transaction VOFM. Besides the routines delivered to you with the system, you can create your own individual routines.
Transaction VOFM allows you to follow a standardized procedure for creating routines. The name ranges are predefined for routines delivered to you with the system and for routines created by the customer. This name convention guarantees that your own routines are not overwritten during a Release upgrade.
Copying requirements and data transfer
The routines for coying requirements and data transfer are defined for the document types sales orders, deliveries, billing documents, sales activities, as well as for texts. You specify copying requirements and the data transfers when defining the document flow for each document type. You enter the routines for texts in the access sequences for texts.
o Copying requirements determine which data is copied during the copying of documents. A copying requirement could define, for example, that the same customer must appear in the document header when you copy an inquiry to a quotation.
o Routines for data transfer make a detailed control of the copying of fields possible. A data transfer could define, for example, that particular item fields can only be copied in combination with other particular fields and can only be copied into contracts or credit and debit memos.
Requirements and formulas
Routines for requirements and formulas are used for functions using the condition technique. You enter these routines in the pricing procedure or the condition types. Requirements are also used for statistics.
o A requirement in pricing can determine that an access is dependent on a particular precondition. It can carry out a check of the document currency, for example, and, depending on whether it is a foreign or the local currency, allow or deny the access.
o Formulas are used in pricing to define various factors for pricing. Formulas are defined for scale base value, condition base value, condition amount, group key, and rounding rules. The formula for a rounding rule could define, for example, that all calculated amounts are rounded to two places behind the decimal point during a price change of the condition record. The formula for a condition base value could define, that the header discount is distributed among the order items according to volume an not value of the item, as is the case in the standard SAP R/3 System.
Creating routines
There are two methods to create a routine
1. Creating by overwriting
When using this method, a note appears as a commentary in the routine to be newly created.
2. Creating
When creating a new routine, an ABAP with internal number assignment is created.
You always have to activate a new routine before using it. Each routine for requirements and formulas, copying requirements and data transfers is stored in a separate program. For each new routine an entry is added in table TFRM and TFRMT. For each routine, a long text can be stored as a text module.
Most routines must be changed in client 000. Transaction VOFM can be transported as XPRAs, which means that after the import all routines can be activated.
Name ranges for routines
The standard routines are to be within the number range 001-599 (for 2 digit formula numbers, 01-49)
The user routines are to be within the number range 600-999 (for 2 digit formula numbers, 50-99).

System automatically clears the service of half amount of total amt in po.

I whenever comes in ml81n to create the entry sheet against purchase order,and after selecting all the services to be entered there,the system automatically clear the service of half amount of total amount in po.
can some one tell me to get rid of this problem.
Regards:Vijay Kumar

In the net value field the system is bringing the half of the amount of total value in ml81n.And that is not changeable.However the value at the purchase order in net and total is the same.
Regards:VIJAY

Table that stores the business role and user id mapping

Hi,
i want to know the table that stores the Business role and the business role and user id mapping in CRM system.
Thanks in Advance.
Regards,
Pricy

Hi Mary,
There is no direct table but there is a way to find it.
HRP1263 is the table where business roles are stored when maintained at org level. These are stored against the Position.
For getting user ID and position linkage refer table HRP1001.
In HRP1001 table use below criteria to get the User and Position.
OTYPE = CP
SCLAS = US
SOBID = User ID
ENDDA = 31.12.9999
Get the OBJID
Query the HRP1001 table again with following
OTYPE = CP
OBJID = OBJID from above Query
ENDDA = 31.12.9999
SCLAS = S
SOBID = Thats Position.
Pass the position to HRP1263 as below.
OTYPE = S
OBJID = POSITION
PROFILE - Thats business role assigned for the given position and user.
Hope this is helpful.
Regards,
Naresh

I have just sought to update my lightroom and am now unable to access the develop function and get a note stating that I have reduced functionality what it this about and how do I get my product back

I have just sought to update my lightroom and am now unable to access the develop function and get a note stating that I have reduced functionality what it this about and how do I get my product back

Hi there
I have version 5.7 and every time I opened it I was told that updates are available and to click on the icon to access these. Instead it just took me to the
adobe page with nowhere visible to update. I then sought to download lightroom cc and this is when I could not access the 'develop' section due to reduced
functionality It was apparent that my photos had been put in cc but no way to access them unless I wanted to subscribe.
I have since remedied the problem as my original lightroom 5.7 icon is still available on the desktop and have gone back to that. I do feel that this is a bit
of a rip off and an unnecessary waste of my time though.
Thank you for your prompt reply by the way.
Carlo
Message Received: May 04 2015, 04:52 PM
From: "dj_paige" <[email protected]>
To: "Carlo Bragagnolo" <[email protected]>
Cc:
Subject: I have just sought to update my lightroom and am now unable to access the develop function and get a note stating that I have
reduced functionality what it this about and how do I get my product back
dj_paige created the discussion
"I have just sought to update my lightroom and am now unable to access the develop function and get a note stating that I have reduced functionality what it
this about and how do I get my product back"
To view the discussion, visit: https://forums.adobe.com/message/7510559#7510559
>

I have tried to log in on a web site and this is what I'm gettig: Alert 530 Autentication failed. I have used the correct password and user's name.

ftp.oxbow.fr This is the file I have log on and I have used the correct password and user's name and this is what comes up:
Alert 530 Authentication Failed!

This is a user to user forum. Apple is not here. Apple does not answer questions here.
iTunes Support -
http://www.apple.com/support/itunes/
Mac App Store Support -
http://www.apple.com/support/mac/app-store/

I bought a cd with Lightroom 5. After installation and registration I am not able to use 'help' function and I cannot update the software. I anyone able to give me a hint how to handle it? Thank you ind advance Karl

I bought a cd with Lightroom 5. After installation and registration I am not able to use 'help' function and I cannot update the software. Is anyone able to give me a hint how to handle it?
Thank you in advance
arl

Hi Keith, sorry for my late reply.
Surely I am able to connect to the help function when Icontact the website
of AdobeLR5.The problem is as follows,
When I open LR5 on my computer and work with it and try to open the help
function in the software, I don't get it.
When I bought the CD I was naiv enough to believe that I get an independent
working software. I learned in the meantime, that the seller does not allow
to work with, without being connected to them.
I don't believe that I am paranoid, but I like to buy something and use it
without to inform the supplier that I do it. Otherwise I could have bought
the license fpr LR5 via internet.
Best regards
Karl
2015-01-02 13:42 GMT+01:00 kglad <[email protected]>:
I bought a cd with Lightroom 5. After installation and registration I
am not able to use 'help' function and I cannot update the software. I
anyone able to give me a hint how to handle it? Thank you ind advance Karl
kglad <https://forums.adobe.com/people/kglad?et=watches.email.outcome>
marked Keith_Reeder
<https://forums.adobe.com/people/Keith_Reeder?et=watches.email.outcome>'s
reply on I bought a cd with Lightroom 5. After installation and
registration I am not able to use 'help' function and I cannot update the
software. I anyone able to give me a hint how to handle it? Thank you ind
advance Karl
<https://forums.adobe.com/thread/1669640?et=watches.email.outcome> as
helpful. View the full reply
<https://forums.adobe.com/message/7059196?et=watches.email.outcome#7059196>

Automatically highlight the next message and remove the "unread" status

In my inbox on Ipad, when I swipe and delete a message or highlight the message and hit the delete icon in the upper right corner, it will automatically highlight the next message and remove the "unread" bullet next to the message. This is version 7.1. Is there a way tnot to have your messages marked as unread when you haven't read them yet?

You can hit the small flag icon and mark it as unread yourself.

Automatically determine the staging area and door

Hello Gurus,
How to automatically determine the staging area and door ? and where to configure it?
thanks very much!

Hi zhang
Material staging areas and doors are related to Warehouse management.
First of all assign WM to your storage location
Doors
This is the place where the goods come to the warehouse or leave from the warehouse
The use of doors is to pick and putaway process in the warehouse.
You can also assign the doors to the staging areas as goods receiving and shipping points
Material staging areas
This is an organizational unit that is assigned to the warehouse number. It is used to organize the goods flow in the warehouse
The use of the material staging areas is that , they are used for interim storage of goods in the warehouse
Staging areas can be defined for other purposes like goods receipt and goods issues
Regards
Srinath

I don't know how to use the canlendars function and the notes are kind of messy code,anyone help me

i don't know how to use the canlendars function and the notes are kind of messy code,anyone help me

Step by step:
1. On your main vi Front Panel, create your boolean indicator.
2. On the block diagram, right click the new boolean indicator and select Create - Reference.
3. On sub-vi front panel, create boolean indicator (or use one that is already created).
4. On sub-vi front panel, create a reference (Controls Palette - Refnum - Control Refnum).
5. Right click on the newly created Refnum and select Select Vi Server Class - Generic - GObject - Control - Boolean. The refnum label changes to BoolRefnum.
6. On sub-vi block diagram, create Property Node (Functions - Application Control - Property Node). Find the BoolRefnum and move it close to the new Property Node.
7. Wire the BoolRefnum to the reference input of the property node.
8.
Right click on the property node and select Change to All Write.
9. Move mouse to point to Visible inside property node box, left click and select Value.
10. Wire the boolean indicator from step 3 to the Value input of the property node.
11. On sub-vi front panel, right click on icon and select Show Connector.
12. Click on empty connector spot then click on the new BoolRefnum. Save your sub-vi.
13. On main vi block diagram, connect refernece created in step 2 to the new connector terminal of sub-vi.
14. Save and run.
Here are the modified vi's.
- tbob
Inventor of the WORM Global
Attachments:
Pass_a_Reference.vi ‏20 KB
GL_Flicker_mod.vi ‏83 KB

I have a MacBook Air with OS X and am having trouble accessing the ADT Pulse Home Security System cameras. The mobile (iPhone and iPad) apps allow access no problem, but I can't get a picture on the MacBook. Have tried Safari and Firefox browsers.

I have a MacBook Air with OS X and am having trouble accessing the ADT Pulse Home Security System cameras. The mobile (iPhone and iPad) apps allow access no problem, but I can't get a picture on the MacBook. Have tried Safari and Firefox browsers. Anyone have any ideas? Thanks.

From a Catherine to Katherine -- Had the exact same problem!! I had to enable Java twice - both in Safari and then on the MacBookAir itself.

I can t use my time capsule with time machine. When I choose the disc (Data) in System Preferences, appears the color wheel and no response. Any help?

When I choose the disc (Data) in System Preferences, appears the color wheel and no response. Any help?

See > Using Time Machine with a Time Capsule
From Pondini’s excellent Information Here...
http://pondini.org/TM/Troubleshooting.htm

The search function and up next option on mini player has dissapeared?

I don't know what I've clicked, or maybe not touched anything but in the last few weeks the search function and up next playlist has disappeared on the mini player. I'm using OS Mavericks, anyone else having this problem or know what to do? Thanks

With the exception of the occasional Russian and German questions that appear here... If the manual is written in English, and the questions posted here are predominantly written in English, I'm not convinced that language is therefore the problem.
I think it kind of works like this... When newbs come here, they:
1) have no prior experience to realize how often a similar question's been posted
2a) aren't familiar with the "etiquette" of searching for similar questions befor posting
2b) aren't familiar the lameness of the search engine on this forum in order to even get answers; or, they've tried it and come up with years' worth of posts to sift through and quickly move to...
3) ...posting a question because they want a quick fix -- they're probably excited about getting up and running quickly with Logic
I have always had problems with the readability of the Logic manual, and I still find it difficult to comprehend because it's really poorly written (IMO). Most, sentences in, it read, like, this. And there's a wont of illustrations (pictures are worth...).
I think some questions are so basic that they don't behoove a response moreso than "spend some time with the manual first". Occasionally I've indulged a total newb (not to single anyone out). It's maybe 75/25 that I felt like I had actually made a difference to their understanding, the poor ratio due to the fact that they simply needed to read the manual first.
Yes, it's frustrating to see newb posts dominate for a while and push more serious questions to the bottom. The occasional OT post is OK, IMO, but what bugs me more is when they predominate.
BTW, can anyone recommend some good strings for a 3-string backpack-style dulcimer?
: ^ )

System automatic propose the OK function and user cannot remove in migo_gr

Similar Messages

Maybe you are looking for