System calculates the year forecast in one colume.
hi
i have query of planning book. i wanna see the total year forecast in the end of the colum that is how much i forecasted, under this table we have some months which tells like jan, feb, march,..till one year.below i have given example how the client want to see the his total forecast into one colume/field.(u03A3 Fiscal 2011). actually we are not maintaing any key figure for this one or we are not maintining any auxallary kf. the clinet want to see the total one year forecast in one colume. it should be updated automatically.
M 07.10 M 08.10 M 09.10 M 10.10 M 11.10 M 12.10 u03A3 Fiscal 2010
250 300 350 400 450 500 2250
like above example the system needs to display the total forecast in the kf of it and the total budge display of its kf. how i can map.
Hi ,
You need to first create appropriate fiscal variant . A detailed SDN forum thread is available as below:
What is the significance of columns while creating Fiscal Year Variant?
Then you need to use this FY variant appropriately in the planning bucket profile.
In the data view then, you need to configure the visisble from field appropriately so that you willl see complete finance year's periods.
If you have aleready configured Ro totals, then you will see the FY totals,
Practically, if say, we are in middle of fianance year, then next FY planning also we need to do . This we can do in another data view, with appropriate planning buckets profile.
I hope this will help.
Please check and confirm.
Regards
Datta
Similar Messages
-
Lastest model of 7.1 speaker systems at the year of 2001
Hi,
i just wondering there is a lastest model of 7.1 speaker system at the year of 2001 but i forgot the model d, i intesested to know more about it. Can i get the detail from you all?
RgdsYecheah,
The 7.1 speakers from last year were the Gigaworks S750 speakers, later we also released the Inspire T7700 speakers.
As far as old 5.1 speakers go, which ones do you need information about? The older sets have since been replaced with new kits, so they're not available anymore.
Cat -
How system calculate the required qty. after MRP RUN
Hi,
I want to know if we are using MRP Type as PD and also we are calculating automatic saftey stock and re order point qty. after MRP RUN according to which rule formula system calculate the safty stock, reorder point qty. and the required qty. as a PR.
and if we are not using calculate safety stock automatically and if we set safety stock qty. manually in this case how system will calculate the required qty.
regards,
zafarplease check the below links.
http://help.sap.com/erp2005_ehp_04/helpdata/EN/6f/b441a9a1b011d3a82d0000e82a3c24/content.htm\
http://help.sap.com/erp2005_ehp_04/helpdata/EN/f4/7d256344af11d182b40000e829fbfe/content.htm
http://help.sap.com/erp2005_ehp_04/helpdata/EN/ff/515c4749d811d182b80000e829fbfe/content.htm
please check the above links may get some idea.
Regards, -
How does the system calculate the Taxes?
Dear all friends,
How does the SAP system calculate the Taxes?
pls. explain with the example will be highly appreciable.
thanx in advance to all
best regards,
RajeshHello
The SAP system calculates tax based on the tax calculation procedure assigned to your country in OBBG.
The tax calculation procedure is similar to the pricing procedure in materials management.
As you have different pricing elements like gross price,discounts,freight charges, etc in pricing procedure, you will have different tax elements like Excise duty,Special excise duty,Cess,Edu cess,VAT,CST, etc in tax calculation procedure.
At the time of PO creation, the tax base amount is communicated to the tax calculation procedure from the pricing procedure.
And the tax values are calculated based on that and how you have configured your tax calculation procedure.
In CIN, we have two tax calculation procedures
TAXINJ which can be formula based or condition based and TAXINN which is condition based.
In TAXINN, the tax percentages are picked from the condition records maintained.
But in TAXINJ, it can be either from the condition records or the tax % given in the tax codes in FTXP. It depends on how you configure your system.
Hope this helps
Regards
Gregory Mathews -
How the system determines the Requirement type for one sales order
Hi,
SAP-SD Gurus,
Please tell me how the system determines the Requirement type for one sales order?
Thanks & Regards,
Sreenivas.PHi,
System follows some search criterial to determine the requirement type
1. First, an attempt is made to find a requirements type using the strategy group in the material master.
2. If the strategy group has not been maintained, the system will determine it using the MRP group.
3. If the MRP group has not been defined, the system uses the material type instead of the MRP group when accessing the corresponding control tables.
4. If no requirements type is found here, the system assumes a special rule and attempts to find a requirements type with the aid of the item category and the MRP type.
5. If this is not possible, a last attempt is made to find a requirements type with the item category only.
6. If the last attempt fails, the system declares the transaction as not relevant for the availability check or transfer of requirements.
Please check the path
SPRO->SALES & DISTRIBUTIONS->BASIC FUNCTIONS>AVAILABILITY CHECK AND TOR->TRANSFER OF REQUIREMENTS--->DETERMINATION OF REQUIREMENT TYPE USING TRANSACTION.
Hope it will clarify
regards,
santosh -
HOW DOES THE SYSTEM CALCULATES THE TAXES
Hello Experts,
Tell me the method of calculating taxes pricing procedure in purchase order.
Thanks and Regards
Nilu S.hi
calculation process is as follows
PB00 Gross Price (info record, contract, scheduled Agreement)
PBXX Gross Price (PO)
FRA1 Freight
RA00 Discount on net
RA01 Discount on Gross
ZA00 Surcharge on net
SKT0 Surcharge / discount
ZPB0 Rebates
MWVS Input Tax
MWAS Output Tax
BASB Base Amount
RM0000 Calculation Schema or Pricing Procedure
(PB00 & PBXX)
RM0002 Calculation Schema or Pricing Procedure
(PB00)
PB00 --> AB00
Copy the Standard one and create new one (ours)
RM0000 contains all the condition types
Regards
ronny -
How the system calculate the tax code in MIRO ?
Hi
I made PO in SAP for material X and Entered the Tax Code I1 but When, i doing the MIRO in SAP, system automatically taking the another Tax code.Also i am trying to change the tax code in MIRO but s/m not allow to change the Tax code.
I am not also maintained info record also.Hi,
While doing MIRO the tax code will defaulted from PO for each line item , but to adjust the tax at last you should enter the tax code manually at header level in MIRO and post it.............
In PO it will be defaulted if you maintain the tax code in Purchasing inforecord aor you should enter it manually..... -
Professional tax grouping change in mid of the year
Dear All,
In my company, i have to change professional tax grouping in mid of the year for few personnel area.
For the month of april, may and june professional tax deducted as per the gujarat state and from july onwards it should be deduct as per the maharastra state. I have assigned the maharastra state professiona tax grouping to that personnel area in table V_7IN0P_PTX. Now my issue is that when i run the july payroll, system calculate the professional tax carry forward of previous months.
could any one provide the solution for the same.
Thanks,
Jyoti PatelHi Jyoti,
Look into the config. of following tables.
V_T7INP1
V_T7INP3
V_T7INP4
What you are getting the professional tax deductions in the july months simulation run.
if any..let us know.
V sai. -
How system calculate exchange rate for two currency vise versa automaticaly
Dear All, i have maintain exchange rate type M with USD to PKR with different time interval. When i run Project System report the system show transaction figures in Controlling Area currency is PKR. However, when i switch to USD currency with translation key (Mean rate as of today) . System do not allow to show the result.
I know if i maintain exchange rate type M with PKR to USD then system display the result. But my concern is that system should automatically calculate exchange rate from PKR to USD for exchange rate M if as i have already maintained exchange rate m with USD to PKR.
How system can do it?
regards
Saqib UsmanHi SAQIB USMAN ,
Please set the indicator for INV in OB07 for the exchange rate type M.
This indicator might not be set in your case.
Then system calculates using inverse ratio.
Please read it for your reference and easy understanding
Indicator: Calculation allowed with inverted exchange rate ?
Indicator that in the case of a missing exchange rate entry in the system
for the required translation from one currency into another, the inverted
exchange rate relationship may also be used.
Example
If an entry is missing for the translation of USD into DEM in the system,
then the translation takes place by means of the entry for the
tranlsation of DEM into USD, providing the indicator is set. -
The system could not calculate the fiscal year start or finish date message
While running the transaction FMO1 and FMOA in funds management we have confronted with the following problem.
Message no. FI 500
The system could not calculate the fiscal year start or finish date.
WE are using year dependent fiscal year and are implementing Funds Management for the first time.
SAP Version 4.0 B
Priority Urgent
For the same problem in Version 4.5 and 4.6 there is a note number 213713 available on service.sap.com.No, there is no bug.
Those activities that have asterisks (Stars) next to their start or finish dates (despite having no constraints) have "External Early Start" or "External Late Finish" dates, respectively, assigned to them. These dates get imported with XER and represent links to activities of those projects that are not in your database but in the external database where the XER originated from.
To remove, filter out all such activities (with stars) and delete their "External" dates. However, be aware that Start or Finish dates of such activities might change if you delete theire External dates. If getting rid of asterisks does alter your schedule, ask the person who sent you the XER to confirm start/finish dates of all such (starred) activiites.
Cheers -
Can anyone let me know how does the system calculate forecast strategy?
Hi all,
I am new in Demand planning,, I can see a couple of Forecast strategy used in the production. I would like to know how does the system does the calculation for the forecasting strategies like
36 Median method
13 Moving average
94 Linear regression
etc.
Can anyone pls guide me how does the system do the calculation and how to validate those calculations!!
Thanks
PoojaHi Pooja,
The below link will contain the detailed list of all forecast strategies alongwith how
it will be calculated alongwith the formulas
http://help.sap.com/saphelp_scm70/helpdata/EN/ac/216b6e337b11d398290000e8a49608/frameset.htm
Please confirm whether this helps you to resolve your query
Regards
R. Senthil Mareeswaran. -
I have several pics of my new grandson throughout the year. How do I combine them into one event
You can drag and drop photos from one Event to another. Or you can flag them and use the Events: Add Flagged photos to Select Event.
However, why not use an Album for the job? -
Over the years my children have set up 2 i tunes accounts on my computer (windows vista) can i amalgamate both into one account with one password / account details that all my family can access with their i pods, i phones, i touch etc
How to use multiple iDevices with one computer
-
I have two ipads using the same apple id. My 3 year old uses one to play learning games. How do I set them up so my apps arent displayed on her ipad?
When you connect that iPad to iTUnes, go to the summary page and scroll down, there should be a box saying 'automatically update' or something to that effect. De select that.
With automatically update on, what you buy on one goes onto the other. but with that box off you can choose.
On the iPad itself, it's under
Settings
iTUnes and App Stores
and then you can choose what you want automatically updated between the two devices. -
Hi,
I have apple account/password on laptop but can't use the same ID etc on new Ipad. On my account it says ID is only for 1 system. I really want only one ID for both Ipad and laptop.
ThanksIt seems that you have used the AppleIDs to "Purchase" your devices, which marries the two for all time and eternity.
For info - Using your Apple ID for Apple services
For Account security issues - Apple ID: Contacting Apple for help with Apple ID account security
regards
CCC
Maybe you are looking for
-
How do i stop my contacts and photos appearing on my daughters ipod and vice versa
how do i stop my contacts and photos syncing with my daughters ipod touch
-
Need help buying a PC for a graphics designer.
Hi, I have a user that uses a desktop maskin basically only for Photoshop. I have my eyes on the following PC but im not sure if it is good enough for working with photoshop. I would appreciate all the help i can get. for exemple, should there be mo
-
CIN configuration in TAXINJ and TAXINN !!
Friends !! Please help in configuring TAXINJ and TAXINN for VAT, Higher Edn.cess.If possible send me screen shots for the same and how to maintain taxcodes. Thanks. Yours sincerely, sreedhar
-
Error while Testing......But generating correctly in Queue
Hi , i am working on IDOC 2 File whrough BPM. I have used one UDF while Mapping to Main nodes of Source and Target. I get my result when i check in Queue but when i test it it is not generating desired O/P as in Queue. Please Help.......
-
Corrupt blocks with RH6.2 and 8.1.7
Hi We have following problem: while running Oracle 8.1.7 on a Compqa DL580 with Smartarray controller 5304 on RedHat 6.2 system we encounter corrupt data blocks after a certain time. We can see corrupt data blocks e.g after reboot, but also during no