System-config-printer-gnome utility freezes when "adding" printer.

I've just started adding my wireless printer to my desktop, and while reading about CUPS in the archwiki, I discovered "system-config-printer-gnome". I installed it with pacman, and then set it up like the wiki said. Now when I run system-config-printer and press "Add", I get this error output in my terminal:
[mike@mike-desktop ~]$ system-config-printer
Traceback (most recent call last):
File "/usr/share/system-config-printer/asyncipp.py", line 196, in send_reply
handler (self._conn, result)
File "/usr/share/system-config-printer/asyncpk1.py", line 143, in _ipp_reply_handler
self._client_reply_handler (self._conn, *args)
File "/usr/share/system-config-printer/asyncconn.py", line 142, in <lambda>
kwds["reply_handler"] = lambda c, r: reply_handler (self, r)
File "/usr/lib/python2.6/site-packages/cupshelpers/cupshelpers.py", line 575, in _reply_handler
self._client_reply_handler (connection, devices)
File "/usr/share/system-config-printer/system-config-printer.py", line 4820, in <lambda>
current_uri))
File "/usr/share/system-config-printer/system-config-printer.py", line 4858, in local_devices_reply
self.add_devices (result, current_uri)
File "/usr/share/system-config-printer/system-config-printer.py", line 5198, in add_devices
physdev = model.get_value (iter, 1)
TypeError: iter must be a GtkTreeIter
Does anyone know what could be wrong? I've done some Googling, but couldn't find anything related to this. I also couldn't find anything related to setting up a wireless printer manually with CUPS, so this way seemed the easiest way of adding a printer. Thanks
P.S. I am using GNOME, and all my packages are up to date.

skunktrader wrote:Did you try pointing your browser at http://localhost:631/admin and attempt to add your printer from there?
Oh wow. That worked perfectly! I guess when I saw that in the wiki I assumed that it was for USB or parallel port printers since I saw "localhost". Sorry to waste thread space!
Thanks so much guys!
P.S. I feel like such a noob

Similar Messages

System-config-printer-gnome freezes when trying to "Add" a printer

I have the same issue that was discussed in the thread system-config-printer-gnome utility freezes when "adding" printer. Specifically, when I try to add a printer using system-config-printer gui, the window freezes and throws back the following code:
mechoid9@ordinateur:~$ system-config-printer
Traceback (most recent call last):
File "/usr/share/system-config-printer/asyncipp.py", line 196, in send_reply
handler (self._conn, result)
File "/usr/share/system-config-printer/asyncpk1.py", line 143, in _ipp_reply_handler
self._client_reply_handler (self._conn, *args)
File "/usr/share/system-config-printer/asyncconn.py", line 142, in <lambda>
kwds["reply_handler"] = lambda c, r: reply_handler (self, r)
File "/usr/lib/python2.7/site-packages/cupshelpers/cupshelpers.py", line 582, in _reply_handler
self._client_reply_handler (connection, devices)
File "/usr/share/system-config-printer/system-config-printer.py", line 4845, in <lambda>
current_uri))
File "/usr/share/system-config-printer/system-config-printer.py", line 4881, in local_devices_reply
self.add_devices (result, current_uri)
File "/usr/share/system-config-printer/system-config-printer.py", line 5228, in add_devices
physdev = model.get_value (iter, 1)
TypeError: iter must be a GtkTreeIter
The solution mentioned was to use the CUPS web interface. This lets me add a printer (which is part of the solution), this is not the complete solution. I've used the utility before, and I'm comfortable with it, and I think that I should be able to use the gnome utility to add the printer if everything on my system is up to date (which it is, as of this posting). I would like to know why it doesn't work anymore (and I'm of the impression that it has something to do with how I've installed python on my system).
I've googled the issue, and perhaps I didn't look around thoroughly enough, but I couldn't find a solution. So if somebody knows where to look I'd be glad to look there.

I have the same problem. I noticed that it occured only after installing the following driver packages.
hpoj-0.91-16 hplip-3.11.3-1 net-snmp-5.6.1-1 foomatic-db-engine-4.0.6_20101215-1 foomatic-db-4.0.6_20101215-1
I did a workaround by installing the printer using the webinterface, removing the drivers again, setting the samba login details and then reinstalling the drivers.
But this problem should really be fixed.

Gnome: Trouble with system-config-printer

Hello all
I have trouble setting up my printers using system-config-printer in Gnome... I added some screenshots to the bottom of this post. When I try to add the Generic CUPS-PDF printer, the "Next" button is disabled and I am not allowed to continue. When I try to add the HP printer that is on my home network (as recognised by the config) the application throws some sort of runtime error (in terminal) and doesn't update the screen or allow me to continue.
Before moving to Arch a few weeks ago, I used Ubuntu 8.04, and it had a very different application for configuring printers (although it was also called system-config-printer). Preferably, I'd just get that application back for configuring printers, it was much more intuitive and above all it actually worked.
I would like to know how to solve my problem of not being able to add the printers I want and how to get the Ubuntu printer config on Arch if that is possible at all.
Thanks
error:
Traceback (most recent call last):
File "/usr/share/system-config-printer/system-config-printer.py", line 5585, in on_tvNPDevices_cursor_changed
physicaldevice.add_device (dev)
File "/usr/share/system-config-printer/PhysicalDevice.py", line 61, in add_device
raise RuntimeError
RuntimeError

@IceHand
Hmm.. It doesn't really make sense to me that I need a webbrowser to configure a printer, but I gave it a try. When I tried adding the CUPS-PDF printer, it asked me what brand it was in the second step. This can't be right. When I tried adding the HP printer that is on my network, it automatically selected the correct driver from a list, but when I chose to continue it asked me for a username and a password, and providing my own did not work. So this method failed for both printers. I would really love to get back the old configuration menu from Ubuntu at this point.
@dbb
The GTK theme is a personal modification of Fresh Dark that removes the Aurora style scrollbar, uses bigger icons and has nicer progress bars.
The font I use is Myriad Pro with slight hinting enabled.
The icon theme is my own mash-up of many tango-styled themes and a few custom icons and improved icons from other themes. You'll find icons there from gnome-colors, gnome-icon-theme, ubuntu-studio, and stuff found randomly on the internet and more. I'm not done perfectioning the theme though, but it's come a long way.

System-config-printer

Hello,
my system will not upgrade because of problems with the package system-config-printer.
Here is the message I get:
error: could not prepare transaction
error: failed to commit transaction (conflicting files)
system-config-printer: /usr/lib/python2.6/site-packages/cupshelpers/__init__.pyc exists in filesystem
system-config-printer: /usr/lib/python2.6/site-packages/cupshelpers/cupshelpers.pyc exists in filesystem
system-config-printer: /usr/lib/python2.6/site-packages/cupshelpers/openprinting.pyc exists in filesystem
system-config-printer: /usr/lib/python2.6/site-packages/cupshelpers/ppds.pyc exists in filesystem
Errors occurred, no packages were upgraded.
What should I do? Remove the files that cannot be replaced because already existing or is there another way?
Thanks

Same issue here.
pacman reports that the files aren't owned by a package.
Around the mtime of each of the files I had installed some printer related packages (gutenprint, ghostscript, etc.). pacman.log excerpt included.
error: could not prepare transaction
error: failed to commit transaction (conflicting files)
system-config-printer: /usr/lib/python2.6/site-packages/cupshelpers/__init__.pyc exists in filesystem
system-config-printer: /usr/lib/python2.6/site-packages/cupshelpers/cupshelpers.pyc exists in filesystem
system-config-printer: /usr/lib/python2.6/site-packages/cupshelpers/openprinting.pyc exists in filesystem
system-config-printer: /usr/lib/python2.6/site-packages/cupshelpers/ppds.pyc exists in filesystem
Errors occurred, no packages were upgraded.
eckythump:~$ sudo pacman -Qo /usr/lib/python2.6/site-packages/cupshelpers/{__init__,cupshelpers,openprinting,ppds}.pyc
error: No package owns /usr/lib/python2.6/site-packages/cupshelpers/__init__.pyc
error: No package owns /usr/lib/python2.6/site-packages/cupshelpers/cupshelpers.pyc
error: No package owns /usr/lib/python2.6/site-packages/cupshelpers/openprinting.pyc
error: No package owns /usr/lib/python2.6/site-packages/cupshelpers/ppds.pyc
eckythump:~$ ls -l /usr/lib/python2.6/site-packages/cupshelpers/{__init__,cupshelpers,openprinting,ppds}.pyc
-rw------- 1 root root 1306 2008-12-13 11:15 /usr/lib/python2.6/site-packages/cupshelpers/__init__.pyc
-rw------- 1 root root 25916 2008-12-13 11:15 /usr/lib/python2.6/site-packages/cupshelpers/cupshelpers.pyc
-rw------- 1 root root 12314 2008-12-13 11:15 /usr/lib/python2.6/site-packages/cupshelpers/openprinting.pyc
-rw------- 1 root root 27712 2008-12-13 11:15 /usr/lib/python2.6/site-packages/cupshelpers/ppds.pyc
##### /var/log/pacman.log
[2008-12-13 11:08] installed cscope (15.6-2)
[2008-12-13 11:08] installed ctags (5.7-1)
[2008-12-13 11:08] >>please run /usr/sbin/cups-genppdupdate
[2008-12-13 11:08] >>and restart cups deamon
[2008-12-13 11:08] installed gutenprint (5.2.2-1)
[2008-12-13 11:08] installed lsof (4.81-1)
[2008-12-13 11:08] installed iotop (0.2.1-2)
[2008-12-13 11:08] installed libmikmod (3.1.12-1)
[2008-12-13 11:08] installed smpeg (0.4.4-4)
[2008-12-13 11:08] installed sdl_mixer (1.2.8-3)
[2008-12-13 11:08] warning: directory permissions differ on var/games/
filesystem: 775 package: 755
[2008-12-13 11:08] installed pinball (0.3.1-3)
[2008-12-13 11:08] installed lincity (1.12.1-2)
[2008-12-13 11:08] >>> Qemu package now provides standard qemu and qemu-kvm.
[2008-12-13 11:08]
[2008-12-13 11:08] >>> PLEASE READ FOR KVM USAGE!
[2008-12-13 11:08] >>> Load the correct KVM module, you will need a KVM capable CPU!
[2008-12-13 11:08] >>> Add yourself to the group 'kvm'.
[2008-12-13 11:08] >>> Use 'qemu-kvm' to use KVM.
[2008-12-13 11:08]
[2008-12-13 11:08] >>> 'qemu-kvm' flexibility:
[2008-12-13 11:08] >>> You can use the qemu-kvm binary without kvm module too.
[2008-12-13 11:08]
[2008-12-13 11:08] >>> PLEASE READ FOR KQEMU USAGE!
[2008-12-13 11:08] >>> You need to install the 'kqemu' package for your kernel.
[2008-12-13 11:08] >>> You need to load the module to use qemu with kqemu.
[2008-12-13 11:08] installed qemu (0.9.1-10)
[2008-12-13 11:08] installed strace (4.5.18-1)
[2008-12-13 11:08] installed unrar (3.8.5-1)
[2008-12-13 11:08] installed unzip (5.52-4)
[2008-12-13 11:08] ==> To use dvipdf, you need to install tetex:
[2008-12-13 11:08] ==> # pacman -S tetex
[2008-12-13 11:08] upgraded ghostscript (8.63-3 -> 8.63-3)
[2008-12-13 11:09] updating the filename database... done
[2008-12-13 11:09] upgraded texlive-core (2008.11313-1 -> 2008.11313-1)
[2008-12-13 11:11] synchronizing package lists
[2008-12-13 11:11] starting full system upgrade
[2008-12-13 11:16] installed perlxml (2.36-1)
[2008-12-13 11:16] installed perl-xml-simple (2.18-2)
[2008-12-13 11:16] installed icon-naming-utils (0.8.7-1)
[2008-12-13 11:16] installed gnome-icon-theme (2.24.0-1)

[SOLVED] system-config-printer won't update or install

After unsucessful update, i uninstalled system-config-printer and tried to reinstall but i get this message:
sudo pacman -S system-config-printer
resolving dependencies...
looking for inter-conflicts...
Packages (4): python2-gobject-3.12.1-1 python2-pycups-1.9.66-2
python2-pycurl-7.19.3.1-2 system-config-printer-1.4.4-1
Total Installed Size: 8.99 MiB
:: Proceed with installation? [Y/n] y
(4/4) checking keys in keyring [######################] 100%
(4/4) checking package integrity [######################] 100%
(4/4) loading package files [######################] 100%
(4/4) checking for file conflicts [######################] 100%
error: failed to commit transaction (conflicting files)
system-config-printer: /usr/share/system-config-printer/debug.pyc exists in filesystem
Errors occurred, no packages were upgraded.
Is there something wrong on my system, or this is a packaging error that will be fixed quickly?
Last edited by max kaspar (2014-04-18 23:11:52)

max kaspar, please edit your post - the bright yellow is hard on the eyes.
When posting configs, code or command output, please use [ code ] tags https://bbs.archlinux.org/help.php#bbcode
like this
It makes the code more readable and - in case of longer listings - more convenient to scroll through.
*.pyc files can cause a conflict like that, usually you can remove them, as they don't belong to any package.

ITunes 11.0.2.26 freezes when adding folder to library

iTunes 11.0.2.26 freezes when adding folder to library. This did not occur with any previous version and is taking place with several different folders. Adding files as a batch wrks fine.

Hi DJ_Dan,
Welcome to the Support Communities!
The article below may be able to help you with this issue.
Click on the link to see more details and screenshots.
iTunes for Windows Vista or Windows 7: Troubleshooting unexpected quits, freezes, or launch issues
http://support.apple.com/kb/TS1717
Cheers,
- Judy

KDE - warning: cannot resolve "system-config-printer =1.1.7-3"

I'm trying to install KDE, fresh install, and this is what I get after: pacman -S kde
resolving dependencies...
warning: provider package was selected (freeglut provides glut)
warning: cannot resolve "system-config-printer>=1.1.7-3", a dependency of "kdeadmin-system-config-printer-kde"
warning: cannot resolve "system-config-printer>=1.1.7-3", a dependency of "kdeutils-printer-applet"
:: the following package(s) cannot be upgraded due to unresolvable dependencies:
kdeadmin-system-config-printer-kde kdeutils-printer-applet
Do you want to skip the above packages(s) for this upgrade? [Y,n]
I try different mirror and again same warning, is it safe to skip this package?
Last edited by archiebald (2009-09-06 10:27:35)

flamelab wrote:
It's been fixed.Wait for your miror to sync.
I use these:
Server = http://mir.archlinux.fr/$repo/os/x86_64
Server = ftp://mir2.archlinuxfr.org/archlinux/$repo/os/x86_64
Server = ftp://ftp.ntua.gr/pub/linux/archlinux/$repo/os/x86_64
Server = ftp://ftp.otenet.gr/pub/linux/archlinux/$repo/os/x86_64
Server = http://www.mirrorservice.org/sites/ftp.archlinux.org/$repo/os/x86_64
Server = http://archlinux.freeside.ru/$repo/os/x86_64
I also use some of this mirrors (mir...)
Thank you for information, I thought that it's something like that.

HT203793 Playlists freezing when adding music to them now, how to unfreeze?

Playlists freezing when adding music to them now, how to unfreeze? I'm not using Match.

Try closing the Music app completely and then reset your iPad. You will not lose any data.
In order to close the Muisc app, you have to drag the app up from the multitasking display. Double tap the home button and you will see apps lined up going left to right across the screen. Swipe to get to the app that you want to close and then swipe "up" on the app preview thumbnail to close it.
Next, reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

Printer setup utility freezes when I try to add drivers

I have an Epson Stylus Photo RX500 all-in-one printer which worked fine until a few weeks ago. My best guess as to why it stopped working is that I let my hard drive fill up and some data got corrupted/overwritten (I've had numerous problems incuding my System Folder becoming 'unblessed' which necessitated a reinstall).
When I tried to print there were no drivers recognized. If I checked in home>library>printers I could find what appeared to be the driver (Stylus Photo RX500) but opening that would bring up a message it wasn't in my list of printers. Trying to add the printer to the list gave the message that the driver wasn't found. In the Finder the driver was listed as 372KB. In my cloned external HD the same file was listed as 408KB. Copying over the larger file to my internal didn't solve the problem.
I went to the Epson site and found a driver which was only listed for OS10.2 and a driver to Intel Macs (I have a G4 PB). I downloaded the 10.2 driver and installed it (408KB). Now when I open the printer setup utility EPSON USB is listed as an option but when I click on that the utility freezes. I've tried restarting and repairing permissions but still no go.
Yoroshiku onegaishimasu. TIA.

Ohayo gozaimasu,
I saw what was available on the US site, so went to the Epson UK site, where they show one driver for OSX - PowerPC, for the RX500, it's version 1.9b versus the 1.7 on the US site. The driver is a 7.9mb download. Looking at the other English sites around the world, 1.9b seems to be the lastest OSX PPC driver.
The link is http://esupport.epson-europe.com/FileDownload.aspx?lng=en-GB&ID=19449&data=6D58D 013F2B22854B9450E1814C134D338E0C605169D8D398A3275D13F8B5BB5
Perhaps that will work better for you.

Acrobat freezes when adding a signature field

We are currently using Acrobat 9.5.5 (updated on 12th June 2013) on a windows 7 (64-bit) machine, when adding a signature field to a PDF that has been created using the AdobePDF printer (from a file created in AutoCAD 2013) Acrobat freezes and starts to use excessive amounts of RAM (peaking at around 1.9GB), and eventually either crashes or after about 30 seconds adds the field.
We've tried to use Acrobat XI (trial version), but this seems to make the problem worse (using over 3.5GB of RAM) and taking in excess of a minute to eventually add the field.
The problem seems to be limited to certain files, 2 in particular are causing the problem, both of which are around 5MB in size, when we add a signature to other smaller files the problem isn't as crippling, the "freeze" only stays for a couple of seconds and the field is usually added.

We don't control the forum emails, you do.
For each separate message,
1. Return to the forum ("View the full discussion")
2. Sign in at top if your login isn't shown
3. Click Stop email notifications

Disk Utility Freeze when using New Image

Has anybody experienced the following?:
my system:
Brand new Mac Pro 8-core 2.66GHz
24GB RAM
Snow Leopard 10.6.3 freshly installed
Apple SuperDrive DVD
I am in the process to install a lot of software and I like to make Disk Image of the software DVD to make things quicker to install.
Now what happens is that as soon as I select New Image from Disk Utility (after selecting the DVD on the left menu), the New Image progress window appears and then Disk Utility freezes. The disk image is being created in the background, but the progress window DOES NOT show the disk image status and eventually I have to OPTION-APPLE ESC from Disk Utility.
What I have tried is:
. delete plist for Disk Utility in Preferences
. repair permissions in SAFE BOOT mode
After that Disk Utility/New Image will work the first time as expected, and then the next time I am getting the same problem.
Any ideas what I could try to diagnose/fix this problem?
Thank you!

Thanks for your feedback.
As far as making a disk image or not, yes it takes some times to create it... longer? I am not sure because when you install a software there is a back and forth reading/writing, whereas when you create your disk image it does the reading and writing in a linear fashion... anyway to me the big benefit is when you have more than one disk part of an install (Apple FCS, Adobe CS, etc...) once you have created all your disk image, it will install everything automatically without having to feed each disc... and usually I have to do a fresh install later on... and finally it gives you a backup of your software...
Thanks again.

System-config-display, gnome-display-properties - inconsistent R5 U5 64bit

Hi all,
I have OEL Rel 5 U5 (64-bit) installed and running on an IBM x3200 which has Radeon integrated graphics, with a IBM ThinkVision LCD monitor (1280x1024 max)
Problem I have is eventhough system-config-display lets me select 1280x1024 I can't actually get it to switch. Upon log-off/log-in, reboot, restart, etc... it still returns to 1024x768 mode.
Running gnome-display-properties only gives me a choice of 1024x768, 800x600, or 640x480.
I've also tried xrandr and trying to force it to 1280x1024 but it tells me I only have the 3 choices given by gnome-display-properties.
My xorg.conf file is configured with 1280x1024, 1024x768, and 800x600 modes, so I'm baffled at where gnome-display-properties and xrandr are getting their mode choices...
Can anyone shed some light on this?

Based on Xorg log I'm guessing the monitor driver just will not support the higher res and apparently that's where 'gnome-display-properties' gets its info regardless of what I try in Xorg.conf.
I'll see if I can manipulate the monitor settings and see where that gets me...
I see the following in the log:
(II) RADEON(0): Monitor1 EDID data ---------------------------
(II) RADEON(0): Manufacturer: IBM Model: 29a Serial#: 16843009
(II) RADEON(0): Year: 2003 Week: 16
(II) RADEON(0): EDID Version: 1.3
(II) RADEON(0): Digital Display Input
(II) RADEON(0): Max Image Size [cm]: horiz.: 30 vert.: 23
(II) RADEON(0): Gamma: 1.00
(II) RADEON(0): No DPMS capabilities specified
(II) RADEON(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
(II) RADEON(0): Default color space is primary color space
(II) RADEON(0): First detailed timing is preferred mode
(II) RADEON(0): redX: 0.640 redY: 0.330 greenX: 0.300 greenY: 0.600
(II) RADEON(0): blueX: 0.150 blueY: 0.060 whiteX: 0.312 whiteY: 0.329
(II) RADEON(0): Supported VESA Video Modes:
(II) RADEON(0): 720x400@70Hz
(II) RADEON(0): 640x480@60Hz
(II) RADEON(0): 640x480@72Hz
(II) RADEON(0): 640x480@75Hz
(II) RADEON(0): 800x600@56Hz
(II) RADEON(0): 800x600@60Hz
(II) RADEON(0): 800x600@72Hz
(II) RADEON(0): 800x600@75Hz
(II) RADEON(0): 1024x768@60Hz
(II) RADEON(0): 1024x768@70Hz
(II) RADEON(0): 1024x768@75Hz
(II) RADEON(0): Manufacturer's mask: 0
(II) RADEON(0): Supported Future Video Modes:
(II) RADEON(0): #0: hsize: 1024 vsize 768 refresh: 60 vid: 16481
(II) RADEON(0): Supported additional Video Mode:
(II) RADEON(0): clock: 65.0 MHz Image Size: 300 x 225 mm
(II) RADEON(0): h_active: 1024 h_sync: 1048 h_sync_end 1184 h_blank_end 1344 h_border: 0
(II) RADEON(0): v_active: 768 v_sync: 771 v_sync_end 777 v_blanking: 806 v_border: 0
(II) RADEON(0): Serial No: Reserved
(II) RADEON(0): Monitor name: IBM RSA2
(II) RADEON(0): Ranges: V min: 50 V max: 160 Hz, H min: 30 H max: 70 kHz, PixClock max 110 MHz
(WW) RADEON(0): Failed to detect secondary monitor, MergedFB/Clone mode disabled
(==) RADEON(0): Using gamma correction (1.0, 1.0, 1.0)
(II) RADEON(0): Validating modes on Primary head ---------
(II) RADEON(0): DFP table revision: 3
(II) RADEON(0): Panel infos found from DDC detailed: 1024x768
(II) RADEON(0): Valid Mode from Detailed timing table: 1024x768
(II) RADEON(0): Valid Mode from standard timing table: 1024x768
(II) RADEON(0): Valid Mode from established timing table: 1024x768
(II) RADEON(0): Valid Mode from established timing table: 1024x768
(II) RADEON(0): Valid Mode from established timing table: 1024x768
(II) RADEON(0): Valid Mode from established timing table: 800x600
(II) RADEON(0): Valid Mode from established timing table: 800x600
(II) RADEON(0): Valid Mode from established timing table: 800x600
(II) RADEON(0): Valid Mode from established timing table: 800x600
(II) RADEON(0): Valid Mode from established timing table: 640x480
(II) RADEON(0): Valid Mode from established timing table: 640x480
(II) RADEON(0): Valid Mode from established timing table: 640x480
(II) RADEON(0): Total of 12 mode(s) found.
Here's video info from lspci:
0a:04.0 VGA compatible controller: ATI Technologies Inc ES1000 (rev 02) (prog-if 00 [VGA controller])
     Subsystem: IBM Unknown device 0325
     Flags: bus master, stepping, fast Back2Back, medium devsel, latency 66, IRQ 11
     Memory at d8000000 (32-bit, prefetchable) [size=128M]
     I/O ports at 6000 [size=256]
     Memory at d0800000 (32-bit, non-prefetchable) [size=64K]
     [virtual] Expansion ROM at d0820000 [disabled] [size=128K]
     Capabilities: [50] Power Management version 2
Xorg.conf:
# Xorg configuration created by system-config-display
Section "ServerLayout"
     Identifier "single head configuration"
     Screen 0 "Screen0" 0 0
     InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "InputDevice"
     Identifier "Keyboard0"
     Driver "kbd"
     Option     "XkbModel" "pc105"
     Option     "XkbLayout" "us"
EndSection
Section "Monitor"
### Comment all HorizSync and VertSync values to use DDC:
### Comment all HorizSync and VertSync values to use DDC:
     Identifier "Monitor0"
     ModelName "LCD Panel 1280x1024"
### Comment all HorizSync and VertSync values to use DDC:
     HorizSync 31.5 - 64.0
     VertRefresh 56.0 - 65.0
     Option     "dpms"
EndSection
Section "Device"
     Identifier "Videocard0"
     Driver "radeon"
     Option     "AccelMethod" "UXA"
EndSection
Section "Screen"
     Identifier "Screen0"
     Device "Videocard0"
     Monitor "Monitor0"
     DefaultDepth 16
     SubSection "Display"
          Viewport 0 0
          Depth 24
          Modes "1280x1024" "1024x768" "800x600"
     EndSubSection
     SubSection "Display"
          Viewport 0 0
          Depth 16
          Modes "1280x1024" "1024x768" "800x600"
     EndSubSection
EndSection

Program freezes when adding text to clip

Hi,
I have sent a 40 minute slideshow to PE7. I am splitting the slide show at various points and inserting short video clips. After having added text to both photos and video two or three times, I now find that the program freezes when I either try to add further text or even if I try to edit previously inserted text.
Has anyone a solution to this please?
Thanks
Jim
P.S. the reason I am adding video to the slide show and not the other way around is that I like the pan and zoom facility of the slide show which is not available as a transition in PE7.
Apparently I cannot add video clips to slide shows in PSE 7 - or at least not more than 5 seconds of video at a time.

Hi, Thanks for you reply.
The photos are between 1 to 3 MB each if thats any help, My Sony Handycam was set to 16:9 format but I can't select this in Project preferences which seems fixed at 4:3. The point is that I have used photos of this size in a project containing both photos and video previously without problems. I have not tried to splice video footage into an imported slide show before.
I will investigate further later.
Thanks again
Jim

Itunes freezes when adding media to Iphone

I have just updated to Itunes 10.2.2.14 on Windows XP, I also have never synced my Iphone 3g to itunes, but when attempting to add any media to the iphone, the progress bar stops halfway on the first song, the arrows remain spinning but nothing happens, until about 20 minutes later it says there was an error and the media could not be copied, how can i fix this?

Jeremy,
Thank You for the reply but my issue was not in the attachment you sent.
iTunes freezes when I attempt to add music to my ipod classic especially playlists I have made.
iTunes recognizes my ipod but when I "add" that when the issue starts.
I have my large library on a pc using windows 7. I have no issue adding music to my device on
my macbook pro but like I said, my 60,000 song plus library is on my pc.
Any additional help would be greatly appreciated.
Happy Holidays,
JJ

ITunes freezes when adding playlist to classic ipod

Happy Holidays,
I recently downloaded itunes update to my windows 7 computer and am
having a major issue adding playlists or songs to my ipod classic.
iTunes freezes up and won't let me add content to my devise - could
someone share a fix or some knowledge please.
Thanks,
JJ

Jeremy,
Thank You for the reply but my issue was not in the attachment you sent.
iTunes freezes when I attempt to add music to my ipod classic especially playlists I have made.
iTunes recognizes my ipod but when I "add" that when the issue starts.
I have my large library on a pc using windows 7. I have no issue adding music to my device on
my macbook pro but like I said, my 60,000 song plus library is on my pc.
Any additional help would be greatly appreciated.
Happy Holidays,
JJ

System-config-printer-gnome utility freezes when "adding" printer.

Similar Messages

Maybe you are looking for