System-Copy on the Backend

Hi,
we are planing to make a copy from our productive-system P11 to the test-System C11. Our SRM-Server is connected to the existing C11 (Client 100). What must I do on the SRM-Server (SRM Server 5) to stay correctly connected? Just copy P11 to C11 won't work - because the GUID's for objects on the Backend (e.g. in the table COMM_CATEGORY on the SRM Server) will no longer match.
I looked for some guides on the SAP Service Portal - but the only document I found was dated July 2002 - and describes what to do if you want to make a copy of the EBP System...
Yours
Jürgen

Hy Jürgen,
First of all, the GUIDs are not used in the Backend, but only localy.
The problem you'll get are:
-RFC/ALE configuration
-Logical system in the Org.plan and some other atributes(the standard program BDLS doesn't change the attributes), for that use program RHOMATTRIBUTES_REPLACE from note #336688
-You have to re-synchronize the number ranges (for PR,PO and reservations depending on the integration scenario you use)
-The vendors may differ between your 2 systems
Hope it'll help.
Regards.
Vadim

Similar Messages

EHP4 System copy of the existing SAP system

Hi!
In order to refresh our SAP ERP system with EHP4 we would like to execute a system copy of the existing SAP EHP4 system.
This system should be installed on the existing server.
Question:
Which parts of the software (SAP, Oracle) do I need to delete before or can I rewrite the existing system with the exported EHP4 system?
Any helpful information will be very appreciated!

Hi!
Many thanks for your reply.
> 1. install MCOD
> 2. Drop database and recreate
The second option means the existing system/database will be rewritten by the new database.
I have a double stack system (ABAP + Java Stack, including Portal)
Question
Does this option (Drop database and recreate) suit in my case (SAP system with double stack) or should delete old SAP system before installing the new one with SAPINST via system import?

Homogeneous system copy on the same hardware and OS

Hi!
When I installed our Q system I was given the wrong user, a local admin instead of a domain admin. Now we can not perform backup with our backup tool, HP dataprotector, because of authorization issues.
My solution is to "move" the system to the domain and to do that I need to do a Homogeneous system copy.
Our system is a 64-bit CRM 7.0 ABAP and J2EE on Windows 2008 with Oracle 10.2
I've read note 676468, 1238351 and the System Copy Guide - System Copy for SAP Systems Based on SAP NetWeaver 7.0 and from this I can see the following ways to do it
1. using SAPinst for export and import
2. using an offline backup
3. copy database files
What are your experiences with the different methods and what would you recommend?
rollo

> that seems to me a bit overdosed for just a user mismatch...
It is not "just" a user mismatch, the full environment is wrong (wrong user ID).
Windows stores users not as usernames but as UIDs (see HKEY\USERS in the registry). All permissions and ACLs and registry access permissions are using that UID - including the enviornmental settings, DCOM configurations etc.
Therefore I would go for system copy as stated in
Note 1233320 - Domain migration for SAP system
Technically it may work on the first look, problems may arise later. <sid>adm has to have some special permissions/policies that are not visible (like 'locking pages in memory' or 'act as part of the operating system' or 'run as batch') etc.
Markus

BI system copy without the Java :consequences ?

Hello,
We have a SAP BI.7 environnement that we are going to sopy from PRD to QAS.
Actually, our SAP BI.7 includes two different systems the BI-ABAP and the BI-JAVA hosted by two different hosts.
We have been asked to copy only the BI-ABAP system, not the BI-JAVA.
What are the consequences of this procedure.
Since BI-JAVA is by definition hosting the Bex Web, is there any risk of data loss : loosing some bex queries for eexample ?
Thank you in advance for your help and your attention.

Because of the user rights we got the issue.
Thanks,
Praveen.

When we do system copy how the DTP converted

Hello All,
I am little curious to know about the DTP bahaviour after the system copy.
example: In DEv system I created the DTP A
When it went to Quality it become B
When it went to Productiion it become C
This is normal behaviour in 7.0.
When we do the system copy the DTP C will come in DEV and Quality system.
Next time suppose i changed the DTP C and I will transport it to Quality does it create new DTP in Quality or it overwrites in quality.
When we run the BDLS aftere sytsem copy will DTP technical name will change back to A in developement?
I am little curious to know about this.
Any help will be appreciated.
Thanks
Gopal

Hi Chetan,
I already checked the note but it has not mentioned the behaviou of DTP after suystem copy. It is giving the logical name with DTP and I ma talking of the DTP Technical Name.
I am really curious to know about this.
If any one did the system copy and can some one throw the light on tha. Really appreciate.
Thanks
Gopal

System copy - CUA how to keep (merge) some of the old target system users ?

Hi,
can anyone suggest if the following is possible and if so, the best way to enable the following within a CUA landscape :-
Standard SAP System Copy of Production to QA.
Cleanup of "Production" user master records in the QA system to remove users not required in QA.
Resend a set of test user id's which existed in the pre-system copy QA system (and still in the QA CUA master system) to the newly copied QA system to merge with the cleaned up QA user master.
Re-link the new QA system with the QA CUA master system to transfer the "merged" list of QA users into the QA CUA.
I've simulated the above on a test server but the process of sending down the sub-set of old QA test id's from the CUA master (using report RSCCUSND) does not create the users in the QA client even though the report itself appears to have transferred the users. Checking SU01 on the target CUA client shows no user has been created and there are no idocs passed from Master --> Client.
Other than either exporting the QA users to a transport before the system copy (for re-import after the system copy to replace the copy of the production user masters with the old QA list), or using the "production" users in QA following the system copy I can't seem to find a way of merging some of the old QA users with a cleaned up list of production users in the QA system post system copy.
If anyone knows of a way to do what I'm suggesting then please let me know.
Brian.

Hi Brian,
I don't think there is an option, directly.
However what I would do is.
Before System Copy
On the QA Side:
1) Create a new client in the QA and only copy user masters in the empty client.
2) In this new client, keep only those users I need after client copy.
3) Take help from ABAP guys to include all usr* table entries (with MANDT field selected only for the new client) into a transport request and save it for later use.
On the Production Side:
1) Export user masters of the production client
2) Create a new client in Production and re-import the user masters
3) Work on the new client to cleanse the unwanted users.
4) Re-export the new user master of the new client and save it for later use.
After System Copy
1) Import the exported user masters from the production server , thus overwriting the client with the users selectively chosen from the production user master.
2) Import the transport request to merge the older users from the QA.
I know this is a crude way.. anyways..
Hope that helps,
Siddhesh

No username of Source system is avbl after livecache system copy

Hi Experts
I have done a livecache system copy from the source system to target system. Here the steps are
Assume my Source SYstem Livecache is RP1 and Target System livecache is RS1.
1. Taken Source system livecache DATA and LOG Area backup RP1.
2. Defined the same source system backup medium name in Target System (RS1 and moving the Source system Liveacache backuped files to Target system and defined the medium name as per that)
3. put the livecache db_admin mode
4. db_activate RECOVER <medium_name>.
5. recover_start <log_medium_name> LOG <nnn>
6. db_online.
Here we faced that
ERR
-24622,ERR_AUTOLOADSYSTAB: Automatic loading of the System Tables failed
-24907,ERR_DBAWRONG: Wrong database system administrator
-24988,ERR_SQL: SQL error
-4008,Unknown user name/password combination
So we activated the SUPERDBA as " db_activate SUPERDBA,<password>
then it came to online. and afterwards we have used the load_systab command to load the tables.
BUT we could not find any Source System name like "RP1ADM" in the tables of the livecache database. Only there are CONTROL,SUPERDBA username availbale. Usually there will be also the source admin name . I dont know why it is missing
Before a month we have done livecahe restore same as now in that time we got the source system name admin also. ( RP1ADM) and also tables which owned by RP1ADM. alos i could find APPSYSPARAM table and the instance also registered.
But now in this restore we could not find the above.
We followed the same procedure and there is no change in the steps also.
Could anyone help me...
Regards
bala

Hello Bala,
1. As I wrote you already, the notes:
886103 System Landscape Copy for SAP SCM
877203     Post steps after the Homogenous liveCache copy using backup/
457425     Homogenous liveCache copy using backup/restore
has all recommended steps to do, when you will run the u201CSystem Landscape Copy for SAP SCMu201D
2. If you run the u201CHomogenous liveCache copy using backup/restoreu201D you should pay attention to the note 457425. After you imported the complete data backup < step 2. > you need to update the system tables.
To update the system tables you need to know the correct database SYSDBA user & password.
After you restored the databackup of the source database, start the database online & run u201Cselect * from usersu201D SQL command to see the SYSDBA user. Then check that you know the DBA user ( DataBase Administrator ) & password of the source database instance => Open the SQL session with this
user & password.
Example:
after db_activate recover <medium_name>
login as control,password
db_online
sql_execute select * from users
sql_connect superdba,<password of source system>
If you didnu2019t get error with the last command, then you could update the system tables with the superdba,<password of source system> using load_systab command.
The system tables will be updated & the correct SYSDBA user & password will be updated in *.UPC file.
3.
user_sysdba:
You make the database system administrator known to Database Manager. It is only necessary to use this DBM command if the database administrator is not known or is incorrectly known to Database Manager.
u201CI have tried like this
after db_activate recover <medium_name>
login as control,password
db_admin
user_sysdba superdba,<password of source system>
db_onlineu201D
You could update the .upc files with the wrong SYSDBA user password u2026
You was lucky, that you knew the correct SYSDBA user and password of the source database.
Example < NLK is my local database >:
A.     I could update the .upc file with wrong password of SYSDBA user:
dbmcli -d NLK -u control,control
dbmcli on NLK>user_sysdba superdba,test
OK
dbmcli on NLK>db_online
OK
dbmcli on NLK>load_systab
ERR
-24909,ERR_DBAUNKNOWN: SYSDBA unknown
dbmcli on NLK>exit
B. I could update the .upc file with wrong SYSDBA user:
dbmcli -d NLK -u control,control
dbmcli on NLK>user_sysdba test,test
OK
dbmcli on NLK> user_get test
OK
u2026
dbmcli on NLK>sql_connect test,test
ERR
-24988,ERR_SQL: SQL error
-4008,Unknown user name/password combination
dbmcli on NLK> dbmcli on NLK>sql_connect superdba,admin
OK
I could connect as test,test; but the test user is NOT SYSDBA user u2026
dbmcli -d NLK -u test,test
dbmcli on NLK>
Itu2019s recommended to user the load_systab command, so the .upc files will be updated with the correct SYSDBA user/password or
you will get error.
4. http://maxdb.sap.com/doc/7_7/86/68627a1bc642e6a6f73d3bc7a55fe1/content.htm
You got error:
ERR
-24622,ERR_AUTOLOADSYSTAB: Automatic loading of the System Tables failed
-24907,ERR_DBAWRONG: Wrong database system administrator
-24988,ERR_SQL: SQL error
-4008,Unknown user name/password combination
The automatically updating the system tables, according to the default value, is switched on.
After you will run the update system tables with the correct SYSDBA user & password the *.UPC file will be updated,
and with the next liveCache restart you will not get this error.
5. See more information in the MAXDB library:
http://maxdb.sap.com/doc/7_7/45/11cbd6459d7201e10000000a155369/content.htm
Thank you and best regards, Natalia Khlopina
Edited by: Natalia Khlopina on May 19, 2010 2:58 PM

System Copy -- database PRR conains user object belongs to system user dbo

Hi all,
I am having an issue while performing the system copy for the sql server.
Actions taken so far.
1.Detached the database.
2.Installed central instance in the target system .
3.Attached the database using attach as option.
4.Then used STM coll for the conversion.
5.Bought sap in Up condition.
Before detaching the database made export for java addin abap in source system
Then I am trying to import the java add in abap using sapinst(system copy option)..In the half of the way i am getting the below message as ..
DATABASE QAS containus user object belongs to system user dbo.
I have performed the 551915 , 151603 but the still the same message is dispalying.
In log files. inserting
TRACE [iaxxejsexp.cpp:208]
EJS_Installer::writeTraceToLogBook()
- Database XIA contains user objects belonging to system user dbo
TRACE [iaxxbjsmod.cpp:301]
CJSlibModule::showMessageBox_impl()
<html> <head></head> <body> <b>Problems were found after checking configuration of database server b><br>- Database XIA contains user objects belonging to system user dbo<br><br>SOLUTION: Fix these problems to continue the installation. </body> </html>
TRACE [iaxxgenimp.cpp:845]
showDialog()
waiting for an answer from gui
TRACE [iaxxdlghnd.cpp:180]
CDialogHandler::doHandleDoc()
ACTION_OK received
ERROR 2009-01-09 12:52:31 [iaxxinscbk.cpp:289]
abortInstallation
MDB-05919 Errors were found when checking connection to or configuration of database server (listed above in the log file).
TRACE [iaxxejsbas.hpp:270]
EJS_Base::dispatchFunctionCall()
JS Callback has thrown std::ESAPinstException: ESAPinstException: error text undefined
TRACE [syxxcfsmgt.cpp:430]
CSyFileSystemMgtImpl::getFile(iastring,bool)
lib=iamodmssql module=CIaNtMssDmo
WARNING: THE FUNCTIONALITY YOU ARE USING IS DEPRECATED: getFile(const iastring & sFullName, bool bCaseSensitive) const. Use getFile(const PSyFSPath &) const instead.
TRACE [syxxcfsmgt.cpp:195]
CSyFileSystemMgtImpl::getNode(iastring,bool)
lib=iamodmssql module=CIaNtMssDmo
WARNING: THE FUNCTIONALITY YOU ARE USING IS DEPRECATED: getNode(const iastring & sFullName, bool bCaseSensitive) const. Use getNode(const PSyFSPath &) const instead.
TRACE [syxxcfsmgt.cpp:921]
CSyFileSystemMgtImpl::isExisting(iastring,bool)
lib=iamodmssql module=CIaNtMssDmo
WARNING: THE FUNCTIONALITY YOU ARE USING IS DEPRECATED: CSyFileSystemMgtImpl::isExisting(const iastring & , bool , ISyNode::eNodeType ) const. Use CSyFileSystemMgtImpl::isExisting(const CSyPath & , ISyNode::eNodeType ) const instead.
WARNING 2009-01-09 12:52:31 [iaxxccntrl.cpp:477]
CController::stepExecuted()
The step dSetActionUnattended with step key J2EE_EngineEnterprise_Addin_OneHost|ind|ind|ind|WebAS|630|0|J2EE_EngineEnterpriseDialogs|ind|ind|ind|WebAS|630|0|J2EE_Engine|ind|ind|ind|J2EE_Engine|630|0|MssJ2eeDBSetup|ind|ind|ind|ind|ind|0|MssDatabaseInfo|ind|ind|ind|ind|ind|0|dSetActionUnattended was executed with status ERROR.
TRACE [iaxxcsihlp.hpp:301]
main()
An error occurred during the installation of component SAP NetWeaver '04 SR1> SAP System Installation> Java Add-In for ABAP> MS SQL Server> Central / Distributed System> Java System Finalization. Press the log view button to get extended error information or press OK to terminate the installation. Log files are written to SAP NetWeaver '04 SR1> SAP System Installation> Java Add-In for ABAP> MS SQL Server> Central / Distributed System> Java System Finalization.
TRACE [iaxxgenimp.cpp:845]
showDialog()
waiting for an answer from gui
TRACE [iaxxdlghnd.cpp:180]
CDialogHandler::doHandleDoc()
ACTION_OK received
WARNING 2009-01-09 12:52:33 [iaxxcsihlp.hpp:250]
main()
An error occurred during the installation.
Regadrs
Vijay

Hi,
what do you get executing this statement:
use <SID>
go
select * from sys.objects where schema_id =
(select schema_id from sys.schemas where name = 'dbo')
go
Sven

How to stop jobs after a system copy

Hi All,
After doing a system copy from the Production system to some test system, all the jobs that are supposed to be triggered in the production server will also trigger in the test system which is not good.
For example, If we have a payroll running every month. After i do a system copy the same payroll will also be triggered in the test server which is un acceptable.
How do we go about it and what are all the steps that we need to follow after a system copy?
Points will be rewarded.
Thanks
Vijay

Hello Vijay,
you surely need background processes in a running system.
But you can start a SAP system without any background processes.
When the system is up you go to sm37 and delete (or de-release) all the jobs you don't need in the target system. Then set the number of batch processes to the amount you want and restart the system.
Alternatively you can prepare your source system accordingly with the SAP System Copy Guide - Section 3.2 Technical Preparations:
"Set all released jobs from Released to Scheduled:
Tools -> CCMS -> Background Processing -> Jobs - Overview and Administration (transaction SM37)
You also need to do this for jobs that must run periodically (see SAP Note 16083).
Select all jobs (include start after event) as follows:
Job -> Released -> Scheduled"
I think the best way for you is to read this guide!
Everything is explained very well there.
Goto:
https://service.sap.com/systemcopy
In the left tree select:
-> SAP Netweaver
-> SAP Netweaver in Detail
-> Software Life-Cycle Management
-> System Copy & Migration
-> Media Library
There are all the Guides for the current releases.
Regards, Michael
Message was edited by:
Michael Teubner

Odd System Copy

Hello Experts,
I am performing a homogeneous system copy on linux w/ MaxDB. The source system is really more like source systems. Using one database instance (XDB), I have an ERP 6.0 EHP4 system (XS1) and an EP instance (JS1). My first step was to export the database using the Database Manager; then I made the export available to the target system. The system copy for the abap application server went without a problem. Now I am having trouble with the J2EE system copy.
My assumption was that the single MaxDB export contained both the ABAP schema (SAPXS1) and the J2EE schema (SAPJS1DB). Also, I assumed since XS1 and JS1 are two separate instances sharing a single database instance, then I would also need to complete two system copies. Were any of those two assumptions false?
My hope was to skip the recovery w/ initialization step during the J2EE system copy since the DB containing the J2EE backup should already be loaded in the target database host. The error I'm encountering on the J2EE system copy is "You can not use existing instance while installing with backup/recovery method." Sadly, that error message is very straight forward and doesn't leave much hope to complete both system copies using this method.
A system copy for both ABAP and J2EE stacks ins't the correct path, is it?
Any help is appreciated.
Kind Regards,
Zach Shay

Markus,
Update #1:
It appears that sapinst will allow me to do a system copy of the J2EE stack via the first method.
Standard System Copy / Migration (load-based)
What is a bit queer on the whole situation is the wording that sapinst is presenting me. sapinst asks me for a "Migration Export." I supply the directory with the label, "JAVA." Then sapinst asks me if I would like to use the existing database or create a new one. It allows me to select use existing database (which is a step past what is allowed via Homogenous System Copy)! However, sapinst then asks me for another Migration Export.... Unfortunately this Migration Export has the label "SAP:MIGJDMP:701:::*", and is a label not present in any of my export directories (or subdirectories).
The labels I have from the ABAP and Java exports are:
SAP:JMIG:701:*:*:*
SAP:MIGSDM:701:MIGRATION:*:*
SAP:MIGAPPS:701:MIGRATION:*:*
SAP:MIG:*:EXPORT(1/:*:*
Is this MIGJDMP Migration Export related to a database export via R3Load or something similar? If so, how do I get this?
\[reading more documentation...\]
Thank you,
Zach

Urgent Help Homogenous System copy

Hello!
We have SAP Portal 6.0 ABAP+JAVA WAS640, in Windows 2003 and Oracle
9.2.x.
We are updating our devellopment environment, doing a Homogeneous
System copy using the R3load copy method.
Creating the ABAP Database Instance in the target system, in step
Database Load, SAPINST ask a Migration Key...
Any suggestion ?
Thanks in advance.
Arnaldo Calaçda.

About migration key go to http://service.sap.com/migrationkey and also take it.
But usually it is required at heterogeneous system copy,you do not need to enter any migration key (for a homogeneous system copy). Describe your system more full and read the migration log, for exemple can be such as Note 747773
Award if helpful. Regards.

Post installation steps after SAP BW system copy

Hi!
I am about to do post processsing steps after system copy of SAP BW system.
1) One of the steps is to delete all entries from tables DBSTATHORA, DBSTAIHORA, DBSTATIORA,
DBSTATTORA.
Question: what is the way to do this?
2) During the installation I received the error within import ABAP step.
(IMP) INFO: import of D010TAB completed (4477754 rows) #20090505133631
DbSl Trace: Error 12801 in exec_immediate() from oci_execute_stmt(), orpc=0
DbSl Trace: ORA-12801 occurred when executing SQL stmt (parse error offset=0)
(DB) ERROR: DDL statement failed
(CREATE UNIQUE INDEX "D010TAB~0" ON "D010TAB" ( "MASTER", "TABNAME" ) TABLESPACE PSAPSR3700 STORAGE (INITIAL 423090176 NEXT 0000000640K MINEXTENTS 0000000001 MAXEXTENTS 2147483645 PCTINCREASE 0 ) NOLOGGING COMPUTE STATISTICS PARALLEL )
DbSlExecute: rc = 99
(SQL error 12801)
error message returned by DbSl:
ORA-12801: error signaled in parallel query server P000
ORA-01659: unable to allocate MINEXTENTS beyond 34 in tablespace PSAPSR3700
(DB) INFO: disconnected from DB
As solution I changed the the following lines within D010TAB.TSK:
from D010TAB~ 0 C err to D010TAB~0 C ign and
from D010TAB1 C err to D010TAB1 C ign
Question:
how to create index manually after system copy?
Thnak you very much!

Jgen Pfeiffer wrote:>
> Hi!
>
> I am about to do post processsing steps after system copy of SAP BW system.
>
> 1) One of the steps is to delete all entries from tables DBSTATHORA, DBSTAIHORA, DBSTATIORA,
> DBSTATTORA.
> Question: what is the way to do this?
Simply run
TRUNCATE TABLE <table_name>;
for each of those tables.
Make sure to either logon as SAP<SID> or provide the owner of the tables with the statement.
> 2) During the installation I received the error within import ABAP step.
> (IMP) INFO: import of D010TAB completed (4477754 rows) #20090505133631
> DbSl Trace: Error 12801 in exec_immediate() from oci_execute_stmt(), orpc=0
> DbSl Trace: ORA-12801 occurred when executing SQL stmt (parse error offset=0)
> (DB) ERROR: DDL statement failed
> (CREATE UNIQUE INDEX "D010TAB~0" ON "D010TAB" ( "MASTER", "TABNAME" ) TABLESPACE PSAPSR3700 STORAGE (INITIAL 423090176 NEXT 0000000640K MINEXTENTS 0000000001 MAXEXTENTS 2147483645 PCTINCREASE 0 ) NOLOGGING COMPUTE STATISTICS PARALLEL )
> DbSlExecute: rc = 99
> (SQL error 12801)
> error message returned by DbSl:
> ORA-12801: error signaled in parallel query server P000
> ORA-01659: unable to allocate MINEXTENTS beyond 34 in tablespace PSAPSR3700
> (DB) INFO: disconnected from DB
>
> As solution I changed the the following lines within D010TAB.TSK:
> from D010TAB~ 0 C err to D010TAB~0 C ign and
> from D010TAB1 C err to D010TAB1 C ign
>
> Question:
> how to create index manually after system copy?
The problem here was the large INITIAL size clause.
If there is enough freespace at all in the tablespace this should work:
CREATE UNIQUE INDEX "D010TAB~0" ON "D010TAB" ( "MASTER", "TABNAME" ) TABLESPACE PSAPSR3700 NOLOGGING COMPUTE STATISTICS PARALLEL;
If I'm not wrong, the second index is just vice versa:
CREATE UNIQUE INDEX "D010TAB~1" ON "D010TAB" ( "TABNAME", "MASTER" ) TABLESPACE PSAPSR3700 NOLOGGING COMPUTE STATISTICS PARALLEL;
In general it is really not a good idea to skip the creation of unique indexes...
regards,
Lars

About sap bw system Copy or backup ?(URGENT)

Hi gurus:
     Hi friends,I saw many theads about this subject,and I found many documents,But STILL I can't find the way to solve my problem.
     It is: How to export the objects I created in develop system to a harddisk, then import it to the QA system . Dev to QA with harddisk NOT online?
     And can I backup the whole bw system in the harddisk,and restore the bw system in the qa system istead ? how to backup the bw system ?
All useful reply will assign points
thx
chan

Hi Zegion,
I think the following may help you:
Purpose: Preserves logical system dependent objects for restoration in case of a system copy issue when a logical source system is deleted or deactivated. BW will auto re-generate a lot, but not these objects.
1.     Create on a development system like BWD, because the system is set as a development system in SCC4 and can create and export transports, and will include all objects. A dummy can be used for comparison if the system to be copied is production or test.
a.     If creating on another system, like BW test (BWT) or production, you must first open the system in
   i.     SE06 System Change option modifiable /BIC and /BI0
   ii.     SCC4 client settings set like in BW Development system (BWD)
   iii.     STMS in client 000 from BWD (domain controller)
            1.     Remove BWT from transport path
            2.     Setup new 2-system path BWT-BW? (BWS or virtual system). This creates a ZOUO transport layer, allowing creation of non-local/not $TMP package transports (see complex sample below)
2.     Go to RSA1-Admin workbench, Transport Connection
    a.     Select Object Types
    b.     Set for Grouping-Save for system copy
    c.     Set for Start manual collection
    d.     Set for Display List
3.     Drag and drop source system (select from select objects list and transfer selection) to collection window, example SCEM, SC0CLNT575, DEVCLNT100, SAP_DEMO. I recommend only doing one source system at a time for maximum flexibilityand because the R3 sources are very large.
    a.     Then execute collection Gather dependent objects
    b.     Select each category (mainly Transfer Rules, Transfer structure and InfoPackageswhatever is selected. On each header, right click and select transfer all below
    c.     Validate that there are no objects in the $TMP development package (DevClass). If it is, select the object and change package button to set to ZAWB. (Anything but $TMP (local))
    d.     NOTE- To reset transport connection, select anything on the left frame of the screen to refresh
4.     You are now ready to transportselect the truck icon to create
    a.     Call it Save for System Copy and the source system name
    b.     Go to SE09/SE10 and release it and tasks to the OS level
5.     Cleanup reset STMS and distribute, reset SCC4 and SE06 on BW0/Source BW system
6.     Verify RSA1- Tools mapping of source system names on target BW system (i.e. BWU) for source system of transport (i.e. SC0CLNT575).
7.     Verify RSA1- Modeling-Source system connection checks OK on target system
8.     Manually import transport in STMS Import Queue, extras, other requests, Add (to buffer). Import single with right click or partially loaded truck icon, select options as below:
9.     LAST STEP Validate import logs and activated objects. If there is an error, ensure the link to the new system is active, the RSA1-Tools-Mapping of source system names converts properly from say DEVCLNT100 to TSTCLNT200 (correct frame of reference) and reimport.
if it helpful reward point are appreciated

PI 7.1 System copy Devline does not exist: 8a5afe612d3511df97170017a4a7b84d

HI All,
We have done the system copy of the PID 7.1 ehp1 from one hardware to another Hardware later
abap and java insances are working fine but we are not able to create or save objects in PI after sytem copy we are facing the issues while saving the objects
Isuees was "Devline does not exist: 8a5afe612d3511df97170017a4a7b84d."
Appreciate your help.
Regards
Kotesh

Hi Eoin Kierans,
Thanks for your reply, We have not checked the system before the System copy now source is not available, Could you please help us on resolving the issue in Target PI system now.
We have chekced in the ESR few objects we can see OTC AND RTR are in the conflict Tab, When i ran the consistency check pleae fidn the below result:
Standard Consistency Check
ajaiswal
Following problem found during consistency check for object Operation Mapping:Mapping program Message Mapping MM_IN1013 | http://pi.cott.com/OTC/IN1013_AR_INVOICE does not match request target message IDoc ZFI_ARINVOICE.ACLREC01.ZFI_ARIV | urn:sap-com:document:sap:idoc:messages. Target message External Message ED_IN1013 | http://pi.cott.com/OTC/IN1013_AR_INVOICE | ZFI_ARIV | of the message mapping is different.
Standard Consistency Check
ajaiswal
Following problem found during consistency check for object Operation Mapping:Mapping program Message Mapping MM_IN1014 | http://pi.cott.com/OTC/IN1014_AR_INVOICE_UK does not match request target message IDoc ZFI_BPCS_AR_UK.ACLREC01.ZFIARUK | urn:sap-com:document:sap:idoc:messages. Target message External Message ED_IN1014 | http://pi.cott.com/OTC/IN1014_AR_INVOICE_UK | ZFIARUK | of the message mapping is different.
Please help us on resolving the issues in Target PI system now.
Regards
Kotesh
Deleted Objects
rmukherj
Delete version found for object Service Interface

Heterogeneous System Copy from MS SQL to Oracle 11g

Good day friends,
I am currently in the stage of running SAPINST to continue the System Copy to the Target (i.e. the export is complete).
This may seem like a rudimentary question, but I am trying to implement Oracle 11g as the new database (and the SAP version of ECC 5). Now when I execute the sapinst, I only get the option for the Client on 9.2 and the RDBMS on 10.2.0.4.
I would like to specify 10.2 for the Client and 11g for the RDBMS, but those options are not included in the SAPINST. What must I do to get these options in the SAPINST?
Any help would be welcome.
Thanks.

I have run a system export from MSSQL and Windows Server, and I wish to run the import to Red Hat 5.4 and Oracle 11g.
I have used the latest ECC 5 Installation Master disk, which still does not have the option to install Oracle 11g. In fact, it only has the option to install Oracle 10g with an Oracle Client version 9. Surely there must be a newer option with Oracle Client 10?
Here is the product code for the Inst Master I downloaded.
6.20/6.40 based products Installation Master (Edition May 2008) Number 51033746

System-Copy on the Backend

Similar Messages

Maybe you are looking for