System Create in SAP portel
Dear Team,
I want to create System in service.sap.com. Because I want to regester this system in my Protal and i want to take permanenet License key for this server.
How i create system in SAP Portel.
Thanks
RAJ
Check
http://service.sap.com/licensekey
--> Request permanent license key
Markus
Similar Messages
-
New system create in SAP Portel
Dear Group,
I have just Install One system in my landscape. Now I want to configur this System in SAP Portel.How I can Configure this system in SAP Portel.So that when I go to sap portel and Connect to sap.It show that system. Right now only PRD, DEV and QAS is displaying.When I want to send messege to SAP.
That system show .
kallisHi Kallis
When you will request for license key for the new installed system, you will automatically get your new system into SAP Portal.
check all these four
http://service.sap.com/system-data
System Data initial page
User Documentation
Learning Map
http://help.sap.com/saphelp_sm40/helpdata/EN/2c/272bf256a448a6a41dc093bd269bfe/frameset.htm
https://websmp102.sap-ag.de/licensekey -
Error while accessing System created by SAP Portal system template
Hello all,
I have created one system from SAP Portal system template in .net PDK application. This system have number of properties created in the .cs file of the System using the following code.
[PortalComponentFieldProperty(PlainDescription = HOSTNAME, PropertyType = PropertyValueType.String, LongDescription = "Host Name", AdminPersonalization = PersonalizationType.Dialog, Category = "Application Settings")]
[DefaultValue(EMPTYSTRING)]
public string HostName
get
return (string)this.GetValue(HOSTNAME);
When i created a system in EP from par file, It don't get any error but when i export this system and again import it gives me the "Null reference exception error" at the line
return (string)this.GetValue(HOSTNAME);
Can anybody know the resion of this? Should i set permissions to the system or should i assign roles to the system?
Please reply soon.
Thanks in advance,
PrashantHi everyone
I have got the solution
Thanks
Mumtaz -
Error while creating source system entry in SAP BW system
Hi,
I am creating source system entry in SAP BW system for ECC system.In T-Code RSA1 i entered all the details of source system and BW system like RFC destination of source system and RFC user passowrd.
After clicking on enter system is promting me to enter into the souce system using administrator user.but i don't have admin user with SAP_ALL and SAP_NEW profiles because in my organisation they don't assign these profiles to any user.
So can you please update me what are the authorization required for dialog user in source system.
Regards,
GauravI would recommend to create a USER ID as COMMUNICATION type and assign SAP_ALL for it... this way, it can never be misused..
This will ensure that the user ID will have correct authorization in the source system and will not face any authorization related errors later on -
I have error while testing the system created from a sap business objects template in SAP portal
I have error while testing the system created from a sap business objects template in SAP portal. Error text:
com.sapportals.connector.connection.ConnectionFailedException: Connection Failed: A nested exception occurred. Could not initialize physical connection. Connection Failed: A nested exception occurred. Could not initialize physical connection. Connection Failed: A nested exception occurred. Could not create JCO connection. 'mshost' missing
I configure integration SAP portal and SAP BW system. All system requirements are complied.
Environment
SAP Business Objects 4.0
SAP BW 7.31
1. I configure SSSO between SAP BW and SAP Business Objects Enterprise 4.0
2. Next I setting integration SAP PORTAL with SAP BW system
3. I download certificate from portal. Select Certificates and key (http://sapserver:port/nwa) – See scren_
4. In next window selected Ticketkeystore and Saplogonticketpair-cert( near part window form)
5. Select Export entry button and binary format file certificate for download. Press download.
6. Save certificate file in local PC folder
In next step need export certificate file to SAP system. Sequence of step:
1. Run STRUSTSS02 transaction .
2. Chose certificate ->import.
3. Select downloaded certificate file
4. Select Add to certificate list button and Add to ACL button
5. Inter System ID and Client(000)
6. In next I download iview sap business objects template into sap portal: System administration->transport->Import. And select and download sap business Objects iview template in .epa format into sap portal.
7. Result – downloaded iview.
8. In next step I create system from template. System administration->system landscape.
9. In next step I input parameters for my system in Connector category, Sap business objects and user management categories: See screen _2
10. When I created the system and test the connection error occurred: See screen_3
This issue is important enough. I would be grateful for opinions and ideas. Thanks in advance.Did you find a solution?
-
How to Create a SAP R/3 system in system configuration
Hi,
i am new to EP Any body tell me how to Create a SAP R/3 system in system configuration.Thanks in advance.
Thanks
kiran.BHi Kiran,
To create SAP R3 System follows this steps :
in system landscape
(1)create new system
(2)select SAP system using dedicated application server
(3)give system name and id
(4)finish
(5)open system and set following properties
Connector
- App. Host : r3 server name
- Gateway Host :
- SAP client :
- SAP System Name:
- SAP System No. :
- Server Port : 3200 (Default)
- System Type
- give system Alias
User Management
- Logon Method
UIDPW -
Why create BI SAP Query System in EP successful,but visual composer error?
hi,guy,
i create BI SAP Query System in EP test successful.
Test Connection with Connector
Test Details:
The test consists of the following steps:
1. Retrieve the default alias of the system
2. Check the connection to the backend application using the connector defined in this system object
Results
Retrieval of default alias successful
Connection successful .
now,i use VC find data relational system error
error info:
Eroor-21003 cannot retrieve catalogs and schemas.
Failed to connect to backend system. Check your system definition and user privileges.
pls help me.thanks.The connection was previously working and then it stopped after I imported a large amount of data to the SQL db. So the permissions should be fine.
Any other ideas? -
How to create system message in SAP EP?
Dear All,
How to create system message in SAP EP?
i need to find solution for this task. Is there any way without collaboration? For example in SLD there is "System message" without additional functions. Please help.
Portal installed on Netweaver 7.01 EHP1Hi Abay,
You need to develop custom application to accomplished your requirement for system message in the potral.
Please have a look at "Brodcast messages to logged on users in Portal:
Brodcast messages to logged on users in Portal(Part1)
Brodcast messages to logged on users in Portal(Part2)
Also you can develop system message in the KM and integrate in the portal.
Hope it will helps,
Regards, Arun Jaiswal -
How to copy the bookmarks which are created in SAP BW 7.3 to New SAP BW on Hana System?
Hi,
We have requirement of moving the Bookmarks from SAP BW 7.3 system to New SAP BW on Hana System.
Please let me know if it is possible? If possible how to do it.?
Thanks,
tmsHi TMS,
Are you talking about Web template bookmark or QueryDesigner bookmark?
If yes then in both the cases its is stored in your client machine as a browser favourite.This has nothing to do with HANA or BW system.So you can transfer browser favourite file from one system to other.
If you are talking about in anyother context please be precise and more elaborate .
Thanks & Regards
A.Dinesh -
Hello XI guru,
I am configuring RFC to File scneario where i am using BAPI as Source. When i run this BAPI in se37 it gives me short dump stating "call to messaging system failed: com.sap.aii.af.ra.ms.api.DeliveryException:
Please help.
Also I want to know is it necessary to write wrapper for BAPI before configuring. This bapi list all orders created in SCM system.
awaiting ur advises and help
Thanx
AnuHello guys,
I am sorry but kind of confuse, please be with me.
I have RFC with following structure:
'Z_BAPI_MOSRVAPS_GETLIST2'
importing parameters
LOGICAL_SYSTEM = T_LOGICAL_SYSTEM
START_TIME = T_START_TIME
TABLES
PRODUCT_SELECTION = T_PRODUCT_SELECTION
LOCATION_SELECTION = T_LOCATION_SELECTION
LOCTYPE_SELECTION = T_LOCTYPE_SELECTION
ORDER_HEADS = T_ORDER_HEADS
OUTPUT_NODES = T_OUTPUT_NODES.
I put values in logical system/start_time/
product_selection/location_selection/loctype_selection
based on these values order_heads and output_nodes is populated. I want value of these to tables to be sent as file.
Data structure for file is as follows
<?xml version="1.0" encoding="UTF-8" ?>
- <ns0:ORDER_MT xmlns:ns0="uri:scm:sql:transaction">
- <ORDER_HEADS>
- <ITEM>
<ORDER_NUMBER />
<ORDER_TYPE />
</ITEM>
</ORDER_HEADS>
- <OUTPUT_NODES>
- <ITEM>
<MASTER_PRODUCT />
<MASTER_PLANT />
</ITEM>
</OUTPUT_NODES>
</ns0:ORDER_MT>
But the payload has value
<?xml version="1.0" encoding="UTF-8" ?>
- <ns0:ORDER_MT xmlns:ns0="uri:scm:sql:transaction">
remaining is not seen in sxmb_moni and payload cannot be read error is given.
file structure is dummy structure, please tell me know if it is right or i need to change.
Thanx
Anu -
System Monitoring - add SAP PI 711 system
All,
I'm facing problems when I want to add the ABAP stack of my SAP PI 7.11 system...
I use Monitoring Setup Guide (CEN SAP NetWeaver 7.0 EhP 1, SPS 08) to do my setup --> Entering Monitored ABAP Systems with Release SAP NetWeaver 7.1 in ST03G.
Using transaction RZ21--> technical infrastructure --> Configure central system --> create remote monitoring entry.
Next, I choose for DualStack for the component type to be monitored. I fill in all the necessary data and save the entry.
Nothing happens and I do not see the system appearing in the system overiew list.
For single-stack ABAP systems, no problems appear and I can add them.
Please advice.
Thanks.Dear Dimitri,
The problem is that these products
01200314690800000134 -- 9 -- I -- C
01200314690800000134 -- 34 -- I -- C
These products will need to be reverted to S ( SAP BASIS) from C (NON_SAP BASIS)
Since these are primary keys, you will need to copy and change the + existing record, and then delete the old one.
Once this is done, you will have to perform the following:
Call transaction SMSY. Chose System Groups and Logical Components.
Expand 'Logical Components' - 'SAP NETWEAVER'. Expand the product
instances 'Mobile Infrastructure' and 'Process Integration'. For all
logical components that have systems repeat the following procedure.
1. Check if the logical component is used in solutions using the where
used button. If no, you can continue with the next one.
2. If yes, note which systems are assigned to which role.
3. Go to change mode and remove the systems from the logical component
by selecting system SPACE with the value help.
4. Save. Check if a warning says that System monitoring is active.
5. Add the same systems again.
6. Save.
7. If system monitoring was active in a solution the customer should
run the system monitoring setup for the solution again.
If you are not comfortable making these changes, you can raise a message with SAP.
However once this is done, then the SIDs will be offered and selectable.
Regards,
Paul -
Issue in source system creation under sap node
hi,
i am facing a strage issue here while creating a sap source system.
i have two development systems - bd1 for bi development, rd1 for r/3 development. rfc is propely maintained between both of the systems. now im creating the source sytsem under transaction rsa1 - source sytem - sap, i put in all the details and it prompts me to log in to the source system as well. it creates the system properly but the problem is that im creating it under the node sap and it goes under the node bi.
i have deleted it from there and repeated the same process again but still everytime it comes only under the node bi irrespectiv e of the thing that im creating it under sap.
this is the first time im facing this strange issue i have done the same process many time but never seen nething like this, does anyone have any idea for the same.
kindly give ur inputs.
thanks
dipikaHi Dipika,
It is not an operational issue. Its just a display and should not have any problems.
Please go through the below SAP Note to fix the issue.
[Note 1087980 - ECC Source systems appearing in BI folder|https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=1087980]
Regards,
Gaurav
Edited by: Gaurav Kothari on Aug 31, 2009 4:20 PM -
Problem Purchase order created in SAP R/3 sent in to File XI?
Hi all,
I am new to XI, learning it myself.
I am trying to "send purchase order created in SAP R/3 into XI". For that I am following the document titled as <b>"A Beginners Guide to SAP XI
Settings, Part I "</b>. But I am getting problem in connecting R/3 system to XI system.
I am stuck at very first step in the documentation which says:
<b>Setting Communication ports:</b> in this it asks for "<b>RFC Destination</b>"
Please suggest me the step by step procedure to get through it.
Thanks and Regards,
RaviHi,
go through these links...
1. /people/prateek.shah/blog/2005/06/08/introduction-to-idoc-xi-file-scenario-and-complete-walk-through-for-starters
2. IDOC to File
3. /people/michal.krawczyk2/blog/2005/03/29/configuring-the-sender-rfc-adapter--step-by-step
4. /people/prateek.shah/blog/2005/06/08/introduction-to-idoc-xi-file-scenario-and-complete-walk-through-for-starters
5. Re: Idoc to File Scenario
regads,
Ansar. -
Need of XI to send an XML from one SAP system to another SAP system
Dear colleagues,
I work in the SRM solution.
In SRM there is a Purchaser and Supplier scenario called Supplier Self Services.
The Purchaser creates a Purchase order and sends it to the supplier in form of an XML file.
The purchaser system and supplier system are the same SAP system but different clients.
Example: Purchaser client is 300 and Supplier client is 330 and both of them are on the same system.
I have a very basic question.
Currently we have the XI system which acts as an interface to send the Purchaser PO XML to the Supplier as XML.
a)My question is in case the XML structure is identical across both the clients, then what is the need of XI system?
b) Is it not possible to send XML from one client to another without an XI system? there si no need of any message mapping required since I am expecting the same XML structure in both clients.
Please clarify the need of XI system in the following scenario. Is it not possible without XI?
Many thanks.
Best regards,
SrivatsaHi Srivatsa,
YOu can send the XML message from one sap system to another sap system even without an XI system in between.
But the use of SAP XI (Or any other middleware) is recommended because, it gives you the following advantages.
1) Better monitoring and alerting mechanism. XI provides you robust set of tools that let you monitor the status of the messages that are exchanged.
2) Direct communication between systems is referred to as Point to Point communication, which has its own disadvantages as against Hub and SPoke model (Message exchange using XI).
3) Message delivery is guaranteed if you have XI in between.
If the target system is down, the sender sap system will not try multiple times to post the message.
But if you use XI, it can be configured to send the message multiple times, till it succeeds.
Regards,
Ravi Kanth Talagana -
How to register add-on of edited system form in sap b1 9.0?.
Hi all,
I have a problem in SAP b1 9.0.
Actually I added one field of BPCode to Employee master data, so I want to register an add-on of that system form in SAP b1 9.0.
When I create file of .ard as we watch it in video of
Bryan Gomez
Creating and Registering SAP Add-on - YouTube it will be created correctly, But the problem is when I register that the file of .ard it gives error (Cannot create a file when that file already exists). Again when I create a file of .ard of any other User form it gives the same error (Cannot create a file when that file already exists).
But when I create and register the add-on of Hello World in Sample folder of SDK it will be registered correctly.
How can I solve that problem.
Anyone can help me please.Hi pallavi p,
That's good but as I said above when I add the reference of UI API Version 9.0 in the project which has the system form or user form of sap b1 it exactly gives errors in menu.vb of the project.
So let me give you the way you can try.
1. Open new project/ visual basic/ sap business one/ sap business one add-on project. and save it any where
2. Right click on your project
3. Add new item
4. Sap Business One
5. System form (Employee master data) or user form
6. Add
And then if your form is opened
7. Go to add the reference of UI API Version 9.0
8. Check errors found in menu.vb (or in OutPut)
So if it's possible try to solve that problem.
Please anyone can help me.
Maybe you are looking for
-
Query with BAPI_PO_CREATE1 for Partial Service PO.
Dear Experts, I am unable to create a Partial Service PO with BAPI_PO_CREATE1. No matter the Qty specified, in the field POSERVICES-QUANTITY; the Service PO gets created with the Qty specified in the RFQ. For your ref, the sample ABAP code is as belo
-
Dear Sir, When I can find instructions how to configure the WRT54G as an ordinary access point for wireless equipment (notebooks, etc.) Is it technically possible to work without DHCP but assign my local static network addresses to wireless card devi
-
Hello, I'm from Romania. when i installed Oracle Database and Developer Suite 10g, the installed languages were Romanian and English. currently all of error messages for example are in Romanian. (in Dev. Suite too). how can i change to English? Thank
-
Information on the FM "HRWPC_EREC_CREATE_EREC_OBJECT"
Hello All, I am not sure if this is the right forum I should be posting this question. Can anyone tell me where I can find information on the function module HRWPC_EREC_CREATE_EREC_OBJECT . If anybody knows it already, can you briefly go over this fu
-
Adobe form conditional breaks with subtotal
Hi, I need to develop a form with a dynamic table that calculate a subtotal by company Eg: Reference Cash disc. Withh.tax Net loc. curr. CoCd 0 0 10 Z001 TESTE 1 0 0 20 Z001 TESTE 1 0 0 20 Z001 Subtotal 40 CNRWaeoitftsCh ehldhor e.cdtn.ai sccxce