System Monitoring - add SAP PI 711 system

All,
I'm facing problems when I want to add the ABAP stack of my SAP PI 7.11 system...
I use Monitoring Setup Guide (CEN SAP NetWeaver 7.0 EhP 1, SPS 08) to do my setup --> Entering Monitored ABAP Systems with Release SAP NetWeaver 7.1 in ST03G.
Using transaction RZ21--> technical infrastructure --> Configure central system --> create remote monitoring entry.
Next, I choose for DualStack for the component type to be monitored. I fill in all the necessary data and save the entry.
Nothing happens and I do not see the system appearing in the system overiew list.
For single-stack ABAP systems, no problems appear and I can add them.
Please advice.
Thanks.

Dear Dimitri,
The problem is that these products
01200314690800000134 -- 9 -- I -- C
01200314690800000134 -- 34 -- I -- C
These products will need to be reverted to S ( SAP BASIS) from C (NON_SAP BASIS)
Since these are primary keys, you will need to copy and change the + existing record, and then delete the old one.
Once this is done, you will have to perform the following:
Call transaction SMSY. Chose System Groups and Logical Components.
Expand 'Logical Components' - 'SAP NETWEAVER'. Expand the product
instances 'Mobile Infrastructure' and 'Process Integration'. For all
logical components that have systems repeat the following procedure.
1. Check if the logical component is used in solutions using the where
    used button. If no, you can continue with the next one.
2. If yes, note which systems are assigned to which role.
3. Go to change mode and remove the systems from the logical component
     by selecting system SPACE with the value help.
4. Save. Check if a warning says that System monitoring is active.
5. Add the same systems again.
6. Save.
7. If system monitoring was active in a solution the customer should
    run the system monitoring setup for the solution again.
If you are not comfortable making these changes, you can raise a message with SAP.
However once this is done, then the SIDs will be offered and selectable.
Regards,
Paul

Similar Messages

System monitoring work center and CEN system

Hi everybody.
I'm setting up the central monitoring, using SSM as monitoring system. I'm also having a look at the work center for system monitoring; but I don't find how to link the central monitoring capabilities with this dashboard.
I mean, it looks the central monitoring does not provide any advantage to work with this work center, am I right? Anyone has experienced this?
Thanks for your answers!!
Fermí

Hi!
I've done finished this issue!
Please follow steps below:
1. Create activity type in T-Code: KL01
2. Go to KP26 to create the realtionship between Cost Center and Activity.
Now you can see new activity in Costing tab.
Regards!
Woody.

Connection from one PI 7.0 system to 2 SAP R/3 systems

Hi XI Experts,
There is a requirement as below:
I am using PI 7.0 system. This system has to be connected to 2 R/3 systems paralelly. That means, one XI system should be connected to 2 R/3 systems. Request you to suggest the best possible ways to do make this happen.
Please note that , PI system will have to connect to one 4.6C system(R/3) and one SAP ECC 6.0(R/3) system.
Kindly advise.
Regards,
Subbu

Hi
Yes,you can integrate multiple sap systems with PI.
1) Create a automatic Technical system for 4.6C system(R/3) using RZ70 in 4.6c...then create a business system for this.
2) Create a automatic tecnical system in sld for SAP ECC 6.0(R/3) system using rz70 in ecc and create a business system for this.
3) Also create TS & BS if any non sap applications are involved.
use this Business systems as per the interface requirements for sender & receiver
Regards
Abhijit

Managed System configuration for SAP NW Java system in Solution Manager 7.1 SP10

Hi All,
I am doing Managed system configuration for my SAP NW 7.01 Java system and getting below error in step 6 create users SAPSUPPORT & SM_COLL_SID.
"An unexpected error occured. An error occured while processing the UME command READ_USER from agent <hostname> : Server returned: 302 Found "
I have checked my DAA as well as host agents are up and running fine. My Solution Manager is 7.1SP10.
Please suggest.
Regards,
Manish

Manish,
Which UME you are using? portal/ABAP/LDAP
Are you using the SOLMAN_ADMIN user while configuring.
Also check the below forum.
https://scn.sap.com/thread/1167282
Regards,
Raja. G

System Monitoring Setup in Solution Manager

Hello Experts,
We are going to implement and configure Solution Manager - System monitoring setup for pre testing purpose
Currenly we have installed below SAP Systems
1.Solution Manager Server
2.ECC server (Without Ides) - Abap
3.CRM Server (Without Ides) -Abap + Java
We need to setup below tasks in Solution Manager
1.Early watch alert
2.System Monitoring
3.Central System Administration
4.Business Process Monitoring
5.Service Level reporting
1.Is it possible to setup the solution manager -above mentioned tasks without Ides system ?
Could you please someone give input reg this.
Thanks
Thirumal
Edited by: Thiru Thirumal on Aug 6, 2008 4:56 AM
Edited by: Thiru Thirumal on Aug 6, 2008 4:57 AM

Hi,
Q. Is it possible to setup the solution manager -above mentioned tasks without Ides system ?
A. Yes.
Check with links for
1.Early watch alert
This process helps you to identify potential problems early, avoid bottlenecks, and monitor the performance of your ABAP and JAVA systems and your most important business processes, regularly, automatically and effectively. The data collection infrastructure comprises the ABAP Service Data Control Center and the JAVA function module Data Provider. The SAP EarlyWatch Alert in the SAP Solution Manager is a service provided by SAP.
To be able to use it, you have:
maintained the non-ABAP systems correctly in the system landscape maintenance (transaction SMSY)
RFC u2013 Connections between: and an RFC u2013 Connections established.
your satellite systems and the SAP Solution Manager system
SAP Solution Manager and the SAP Service Marketplace
Solution Manager system and Solution Manager Diagnostics
Cf: Solution Manager IMG (transaction SPRO).
checked the availability of the tools required for the SAP Service sessions (add-on ST-A/PI), with the report RTCCTOOL.
activated Alert Monitoring and set-up the Automatic Session Manager (ASM) in the Service Data Control Center (SDCCN) of your satellite systems, for all SAP satellite systems and the central SAP Solution Manager of your solution
set-up your systems in a solution landscape in the SAP Solution Manager
configured Solution Manager Diagnostics
2.System Monitoring
The system monitoring in the SAP Solution Manager is, as described above, like a system-wide central CCMS. It can also contain the central CCMS (CEN) of satellite systems. These CENs can then monitor other components.
The graphical display in the SAP Solution Manager gives you access to the alerts of all systems in a solution. You can go to the local or central CCMS of the satellite systems.
The system proposes the most important alerts in the CCMS monitor collection, according to SAP experience, and their alert thresholds, for each system in the solution, in the system monitoring Session. You can activate or deactivate these alerts. The connection between the local CCMS and the SAP Solution Manager allows you to maintain the alert thresholds directly in the SAP Solution Manager, overwriting the values in the local CCMS.
3.Central System Administration
You activate the customizing for business processes in your solution, in the Business Process MONITORING session in the SAP Solution Manager. A monitoring tree element (MTE), or a monitor collection, u201EBPMu201C of several monitoring objects, is created in the local or central (CEN) CCMS of the satellite system.
The data is collected for the monitoring types of the business process monitoring in contrast to system monitoring, as follows:
● The system collects performance (dialog transactions), posting cancellations (V1 and V2) and u201EOther CCMSu201C and interface data, in the local CCMS of the satellite systems.
● The system collects background processing, application list, application monitors, delivery lists, and document size data, in the central SAP Solution Manager CCMS.
The SAP Solution Manager system copies the data from the local CCMS.
The graphical display in the SAP Solution Manager simplifies access to the alerts for the business processes, business process steps or the interfaces between the systems in a solution. You can go to the local CCMS of the satellite systems.
The connection between the local CCMS and the SAP Solution Manager allows you to maintain the alert thresholds directly in the SAP Solution Manager. These overwrite the values in the local CCMS.
4.Business Process Monitoring
The system and business process monitoring (including interface monitoring) in the SAP Solution Manager, both use the Computing Center Management System (CCMS) (transaction RZ20) architecture. This means that system alerts which occur in the local CCMS, are passed to the SAP Solution Manager via RFC connections between the SAP Solution Manager and the satellites. The system shows these alerts in a graphic or in Sessions. You can also handle the alerts centrally, without having to go to the local CCMS of the satellite systems.
You can see the alerts from several systems in a solution landscape in the SAP Solution Manager, in a graphical overview, in contrast to the local CCMS of the SAP Solution Manager satellite systems. This is the view of a central CCMS (CEN). You can also monitor non-SAP systems in a central CCMS (CEN) of a satellite system
5.Service Level reporting
http://service.sap.com/solutionmanager for all solman tasks as given below.
http://www.asap.net.cn/homepage_en/Solution%20Manager%20EN.pdf
http://help.sap.com/saphelp_sm32/helpdata/en/1b/f02c41ab78f66fe10000000a1550b0/content.htm
http://help.sap.com/saphelp_sm32/helpdata/en/9f/1f46570f8a4a268b3154e0e0f07280/content.htm
Regards,
Srini Nookala

Setup system monitoring wrong text

Dear all,
After implementing Basis patch SAPKB70011 togather with SAPKITL420, Solution Manager system displays wrong text for Alerts in SOLUTION_MANAGER transaction -> Solution Monitoring-> System monitoring -> Operation setup in Setup system monitoring.
expl: for Setup Monitoring for SAP System... all rows shows the same Spool wait time
for Errors / Administrating of ... all rows shows the same Abap error in update
and every time this text is changed when I execute Setup system monitoring.
Should I implement SAPKITL421, SAPKITL422, and SAPKITL423 and are these patches connected with SAPKB70012, SAPKB70013, .. ? Is it necesary when implementing SAPKITL421 to be togather with SAPKB70012 and equivalent, because when I tried to implement SAPKB70011 alone it shows that there is a conflict with the add-on SAPKITL420 and muste be also implemented.
Thank you in advance.
Best regards,
Ruzica

Hello,
Does anyone knows sometinhg about the connection between SAPKITL- and basis patches SAPKB700?
If I need to implement SAPKITL--- patches should I also implement Basis patches?
Regards,
Ruzica

System Monitoring (Availability of satellite systems)

Hi!
I would like to set up System monitoring in SAP Solution Manager.
First of all the availibility of SAP systems is of great interest for me.
How can I create and add the monitoring context for the systems in tcode RZ20?
Is some suitable documentation for my question?
Thank you very much
Philip

Hi,
the relevant documentation can be found under item "Availability Monitoring with CCMSPING" at
<Monitoring Availability> [original link is broken]
Best Regards, Vital

Short Dumps in System Monitoring

Hi!
I set up the system monitoring in SAP Solution Manager.
The most alerts I get from short Dumps.
In order to avoid this issue I would like to optimize the settings of short dumps.
Here my questions:
- Is it possible to set the threshold values behind short dumps
- If I switch off the short dumps is there some possibilities to be inform about frequency?
- Is there some other possibilities to optimize this issue?
Thank you very much!
regards
Thom

Hi Thom.
I think what you need is to setup in System Monitoring the threshold values for the following MTEs of the Satellite System:
Transaction RZ20 --> <Instance> --> R3Abap
This MTE has two attributes:
Shortdumps (MTE Class:R3AbapShortdumps)
Shortdumps Frequency (MTE Class:R3AbapShortdumpsFreq)
By clicking on the properties of one of each attribute you can setup the threshold for how many alerts you want to maintain (General Tab). In Performance tab you will be able to customize the threshold for the alerts.
Hope this helps
Antonio

System Monitoring setup: missing database

I would like to set up System monitoring functionality for satellite system in SOLMAN.
The following problems occurred:
1) Missing database component of the system in System Monitoring set up
Usually the system has the following components in System Monitoring set up:
a) SAP Application Server
b) Server <servername>
c) Database <SID>-Database
For my satellite system the Database component c) is missed.
How can this component be activated? The satellite system has MaXDB
2) Missing system entries in tcode RZ20
I miss the entries of the system e.g. Shortdumps Frequency, AbapErrorInUpdate, Shortdumps in tcode RZ20.
How will the system values added into the RZ20?
Thank you very much!
regards
Thom

Solved!
You just need to maintain the DB in SMSY

Configure System monitoring in SOLMAN

Hi
I need some help on this. For now I have installed solman / windows 2008 / oracle 10g on VM. A test system has been added as a satellite system in solman. CCMS Agent and CCMS PING has been installed in the satellite system. I am able to use my Alert monitor in solman to check out alerts from the satellite system. what do I need to do next to integrate this with solution manager?
I have reads the document http://help.sap.com/saphelp_sm40/helpdata/EN/0b/160419162a476380b5608e7f27a742/content.htm
This talks about "Setup system monitoring" and going into change mode. I dont see the change mode or the option to setup system monitoring.
PS: SMSY is setup correctly, I can see my satellite system from there.
any ideas on how to proceed will be appreciated.
thanks
ravi

The "Setup system monitoring" option showed up after in went into solutions overview in solution_manager Tcode and clicked on a number (hyperlink) under System monitoring for SAP Solution Manager Reference

How to setup system monitoring of EP 7 to Solution Manger 7.0

Hi Experts,
I need help for configuring EP 7 (only JAVA engine) for system to Solution Manger 7.0. IF anyone of you have steps or config guide pls help me ???

Hi Vikas,
In general, system monitoring in SAP Solution Manager use CCMS as the data supplier, which means that, you need to configure CCMS alert infrastructure for your EP system.
General steps:
1. Configure solution manager or other ABAP system as the CEN (central) system as the CCMS infrastructure.
2. Install SAPCCMSR agent (which is part of CCMS Agent), and connect the agent to CEN system
3. Setup system monitoring in Solution Manager
For more information, you can access the help portal of SAP.
Hope that helps.
Thanks, Jett

Copy Customizing for System Monitoring

Hello!
I am about to set up the system Monitoring for the different business systems.
I have seen there in Setup System Monitoring function "Copy Customizing"...
Can I copy the predefined Alerts or also the user defined such as from Tcode RZ20?
What is the procedure to copy the alerts from one system to the another?
Thank you very much!
regards!
Thom

Thank you!
I have got a realy good SAP Tutot regarding this issue..
regards

Setup System Monitoring link disappear in DSWP

Hi All!
Could anybody help me?
I try to setup System Monitoring. But when I selected System Monitoring tab I saw Setup System Monitoring link disappear.
Thanks for your advance,
Alexander Ganiiishev

Hi,
Since this involves some screen steps, I highly recommend you to have a look at this blog link
http://www.sdn.sap.com/irj/scn/weblogs;jsessionid=(J2EE3417800)ID0904017550DB01570500522935060780End?blog=/pub/wlg/3544
Hope this helps.
Cheers
SH

How to send IDocs from a non-SAP system to a SAP system

Hi everyone i am new to SAP R/3 System.
Currently i am required to send IDocs from a non-SAP system to a SAP R/3 System.
There is a guide on Cost-Effective and Quick Communication between SAP and 3rd Party Systems using IDOC HTTP XML Interface. But its from a SAP system to a non-SAP system and i am able to do that.
Is there any step by step guide where they teaches you how to send IDocs from a non-SAP system to SAP system via similar method?
Thank You!

Hi,
I hope this link may help you......
http://publib.boulder.ibm.com/infocenter/iisinfsv/v8r1/index.jsp?topic=/com.ibm.swg.im.iis.ds.entpak.sapr3.use.doc/topics/c_pack_r3_Introduction.html

Multiple SAP R3 Source System in BI

Dear Gurus,
Here's my scenario,
I've SAP ECC Development Source System connected to my SAP BI Development Server system.
Now my Question is ,
1.We also have SAP ECC IDES system client 800 and therefore would like to connect this SAP ECC IDES system to our SAP BI Development System , because we need to do a pilot project for our prospective client and therefore we need the Dashboards and the reports created on the SAP ECC IDES system DATA.
So can I've two Source System in my SAP BI system ?? If yes , will it affect my present objects like InfoCube , Masterdata which I've already created with previous Source System ?
Regards,
-Neha

Hi,
So can I've two Source System in my SAP BI system ??
Yes its absolutely possible. In fact it is done in production systems as well, wherein some big organisations have multiple R/3 systems and only 1 BI system.
If yes , will it affect my present objects like InfoCube , Masterdata which I've already created with previous Source System ?
No it would not affect any of these. Your datatargets can handle the data from multiple systems. There is one rider on this.
The key fields in your datatargets should not have same value from different source systems, otherwise they would get overwritten by the new data records. e.g.
Suppose you have 2LIS_18_I0NOTIF datasource from both the systems getting loaded into same datatarget. If notification number from first system is 123 and from other system also 123, and this is the only keyfield in your DSO, one of them would get overwritten.
Similar would be the case for Master data loading as well. For master data, atleast you have a way around this. You can go for compounding with source system. This way system would differentiate the master data from different source system, even if their values are same.
Hope this was helpful

System Monitoring - add SAP PI 711 system

Similar Messages

Maybe you are looking for