System does not support substitution methods in UWL

Hello Experts,
I am getting "System does not support substitution methods" error message while creating UWL substitution rule in EP7.0.When I check the detailed error message this message is shown for only some systems and remianing systems success message is displayed.
What could be the reason for this issue.
Any help will be greatly appriciated.
Thanks,
Balaram Naidu

Hi, we had the issue following application of SP11->SP18 (NW7.0);
The application of 'SAP Note 1133821 - UWL Destination Service configuration' resolved this in our case.
Hope this helps
Neil
Edited by: Neil Boardman on Jun 18, 2009 4:16 PM

Similar Messages

  • I keep getting this error message "Your operating system does not support the 64-bit version of Silverlight" even though I have a 64 bit system?

    Netflix requires Microsoft Silverlight plug in to view their videos. Every time I try to load it I get the following error message...Your operating system does not support the 64-bit version of Silverlight. I have a 64bit system with Windows Vista Home Premium. Firefox 33.0 is installed.
    Any suggestions?

    Your User Agent: Mozilla/5.0 (Windows NT 6.0; '''WOW64'''; rv:33.0) Gecko/20100101 Firefox/33.0
    As said Firefox for Windows from mozilla.org is a 32-bit application. The WOW64 in UA means it is a 32-bit application on 64-bit Windows.
    Before you ask if there will be a Win64 version of Firefox. If all goes well the first phase of having Win64 for Release may be as early as Firefox 37.0
    https://wiki.mozilla.org/Firefox/win64

  • Getting error when installing OBIEE 11.1.1.6 "Operating system does not support IPV4".

    HI,
    I am trying to install OBIEE 11.1.1.6 on Windows 7 .
    Have created repository successfully ,using the RCU 11.1.1.6 and now tring to install
    OBI. I am getting the below error
    "Operating system does not support IPV4".
    Can anyone please suggest why i am getting this error or
    how should i get rid with this error??
    Manoj.

    Just in case check this Doc ID 1410233.1
    ~ http://cool-bi.com

  • Inst-08072 operating system does not support ipv4

    While installing obiee 11g, I get "inst-08072 operating system does not support ipv4" error. I changed hosts file and defined a loopback adapter.
    But still it is not working. Do you have any supposal for the problem?

    what is your OS? which version of OBIEE are you trying to install? did you install loopback adapter? generally this will occur in 2 cases which i have seen personally, if the right  loopback adapter is not installed or not configured and hosts files is not configured properly. i would suggest you to re-visit them once again and see.
    you can also try to install loopback adapter from here https://technet.microsoft.com/en-us/library/cc708322(v=ws.10).aspx  for configuration follow this https://technet.microsoft.com/en-us/library/cc708341(v=ws.10).aspx 
    how does your hosts file look? can you paste the contents here for eg: xxx.xxx.xx.xxx hostname localhost

  • Mavericks Server; smbd: File system does not support 0x0, time/size attrs

    So I recently installed a Mac Mini with Mavericks and Server 3.2.2 in the main office of my company and everything has been going well, minus a few expected bugs, until recently. Starting last week we've been experiencing random intervals where File Sharing stopped working altogether, and I'd been able to reboot and get it running again. Unfortunately, as I'm the Systems and Server Admin, I've been too busy to look at the logs until now (following the degradation of one of the drives in our DAT-Optic RAID system, I figured it was time to make it a priority), and I'm seeing dozens of entries in the system logs regarding the process smbd with file system does not support errors.
    Here's an example.
    11/19/14 9:56:21.107 AM smbd[602]: File system does not support 0X40000, file attrs
    11/19/14 9:56:21.107 AM smbd[602]: File system does not support 0X0 time attrs
    11/19/14 9:56:21.107 AM smbd[602]: File system does not support 0X0, size attrs
    11/19/14 9:56:21.107 AM smbd[602]: File system does not support 0X40000, file attrs
    11/19/14 9:56:21.107 AM smbd[602]: File system does not support 0X0 time attrs
    11/19/14 9:56:21.107 AM smbd[602]: File system does not support 0X0, size attrs
    11/19/14 9:56:21.108 AM smbd[602]: File system does not support 0X40000, file attrs
    11/19/14 9:56:21.108 AM smbd[602]: File system does not support 0X0 time attrs
    11/19/14 9:56:21.108 AM smbd[602]: File system does not support 0X0, size attrs
    11/19/14 9:56:21.108 AM smbd[602]: File system does not support 0X40000, file attrs
    11/19/14 9:56:21.108 AM smbd[602]: File system does not support 0X0 time attrs
    11/19/14 9:56:21.108 AM smbd[602]: File system does not support 0X0, size attrs
    11/19/14 9:56:21.110 AM smbd[602]: File system does not support 0X40000, file attrs
    11/19/14 9:56:21.110 AM smbd[602]: File system does not support 0X0 time attrs
    11/19/14 9:56:21.110 AM smbd[602]: File system does not support 0X0, size attrs
    11/19/14 9:56:21.119 AM smbd[602]: File system does not support 0X40000, file attrs
    11/19/14 9:56:21.119 AM smbd[602]: File system does not support 0X0 time attrs
    11/19/14 9:56:21.119 AM smbd[602]: File system does not support 0X0, size attrs
    11/19/14 9:56:21.119 AM smbd[602]: File system does not support 0X40000, file attrs
    11/19/14 9:56:21.119 AM smbd[602]: File system does not support 0X0 time attrs
    11/19/14 9:56:21.119 AM smbd[602]: File system does not support 0X0, size attrs
    11/19/14 9:56:21.124 AM smbd[602]: File system does not support 0X40000, file attrs
    11/19/14 9:56:21.124 AM smbd[602]: File system does not support 0X0 time attrs
    11/19/14 9:56:21.124 AM smbd[602]: File system does not support 0X0, size attrs
    11/19/14 9:56:21.124 AM smbd[602]: File system does not support 0X40000, file attrs
    11/19/14 9:56:21.124 AM smbd[602]: File system does not support 0X0 time attrs
    11/19/14 9:56:21.124 AM smbd[602]: File system does not support 0X0, size attrs
    11/19/14 9:56:21.125 AM smbd[602]: File system does not support 0X40000, file attrs
    11/19/14 9:56:21.125 AM smbd[602]: File system does not support 0X0 time attrs
    11/19/14 9:56:21.125 AM smbd[602]: File system does not support 0X0, size attrs
    11/19/14 9:56:21.125 AM smbd[602]: File system does not support 0X40000, file attrs
    11/19/14 9:56:21.125 AM smbd[602]: File system does not support 0X0 time attrs
    11/19/14 9:56:21.125 AM smbd[602]: File system does not support 0X0, size attrs
    11/19/14 9:56:21.130 AM smbd[602]: File system does not support 0X40000, file attrs
    11/19/14 9:56:21.130 AM smbd[602]: File system does not support 0X0 time attrs
    11/19/14 9:56:21.130 AM smbd[602]: File system does not support 0X0, size attrs
    11/19/14 9:56:21.131 AM smbd[602]: File system does not support 0X40000, file attrs
    As far as I can tell, nothing else has changed in our system except for the fact that one of the drives died and was rebuilt as of yesterday (these smbd problems extend to last week shortly after I updated to 3.2.2 I believe). Any help would be much appreciated. I would normally first attempt a repair permissions to see if the issue is related to a bad plist somewhere but the last time we did that, our ACLs were duplicated across our file share and often incorrectly. I'm not sure if it's just me but the last Mac Server software I used was Snow Leopard Server (when it was still a full OS version) and it was infinitely more stable than what I've experienced thus far with Server 3. Anyway, I appreciate any help/advice that can be given and I apologize for the rant.

    Been getting the same errors for a while.
    1/13/15 11:38:04.975 AM smbd[1112]: File system does not support 0X40000, file attrs
    1/13/15 11:38:04.975 AM smbd[1112]: File system does not support 0X0 time attrs
    1/13/15 11:38:04.975 AM smbd[1112]: File system does not support 0X0, size attrs
    1/13/15 11:38:05.124 AM smbd[1112]: File system does not support 0X40000, file attrs
    1/13/15 11:38:05.124 AM smbd[1112]: File system does not support 0X0 time attrs
    1/13/15 11:38:05.124 AM smbd[1112]: File system does not support 0X0, size attrs
    Believe they are related to random disconnects from the file server (10.9.5).

  • Pan and Zoom-I get a warning that my system does not support OpenGL

    I'm using PSE 8 on a Windows 7 64 bit system.  Whenever I view my photos in full screen mode and try to change the transitions to pan and zoom, I get a warning that my system does not support OpenGL.  I have an ATI Radeon HD 5770, updated to the latest driver, and I believe that does support OpenGL.  If I ignore the warning and select pan and zoom anyway, the slideshow cycles through hyper fast then locks up.
    Any idea what is going on?
    Thanks.

    If you're referring to streaming via itv.com, the minimum system requirements can be found here.

  • I am experiencing error while downloading Photoshop. It says that the operating system does not support photoshop

    i am experiencing error while downloading Photoshop. It says that the operating system does not support photoshop

    Since you have not provided any actual system info not told us what version of Photoshop, we can't really know what is going on.
    Mylenium

  • I just purchased creative cloud, but my operating system does not support download. How can this be updated?

    I just purchased creative cloud, but my operating system does not support download. How can this be updated?

    Swelte82 what operating system are you using?  You will need to meet the minimum system requirements in order to install.  You can find the system requirements at System requirements | Creative Cloud.

  • I accidently deleted Safari and now I can't reinstall because it keeps telling me there is a newer version on my computer.  The issue is my system does not support the newer version.  Does anyone know how I can get around this?

    I accidently deleted Safari and now I can't reinstall because it keeps telling me there is a newer version on my computer.  The issue is my system does not support the newer version.  Does anyone know how I can get around this?

    Apple wanted to charge me 50 bucks jsut to talk to someone! 
    I believe you may be referring to the $49 ASL agreement at AppleCare? That is only when/if you are out of AppleCare Protection.
    Can you get to an AppleStore Genius Bar?
    They may be able to fix this for you. No charge.
    I highly doubt that. There is a $70 charge for troubleshooing software issues, EVEN IF there is AppleCare Warranty on the hardware.
    However, since there is no charge for an appointment at a Bar, go make one, and see what options they give you. Let us know how it goes.

  • We have mac os X 10.5.8 we tried to upgrade with the new firefox 4. it removed our old firefox and replaced it with firefox 4. Now we get a message that our system does not support the new firefox. All our bookmarks settings are gone. Please advise.

    When we tried to open firefox 4, all previous settings and bookmarks were gone. Firefox 4 gives message that it is not supported by our system. IMAC G5 power PC with 2 gigs of Ram. Is there any way to restore the old firefox?

    Hi everyone,
    Many of you have had problems with Spotify for Mac OS X 10.5. We no longer support Spotify on this operating system which we announced back in November here as a "heads up".
    However, we've noticed that many folks have been updating regardless which should not be the case. Our intention was to let anyone using Mac OS X10.5 continue using a "legacy" version of Spotify. In any case, the folks who were using 10.5 were updated, and in many cases these customers have experienced crashes with the newest version of the application (Spotify version 0.8.8. at the time of writing).
    To make a long story short, we messed up in updating folks who should not have been updated and we're sorry. We plan on fixing the problem of Spotify updating to the latest version for Mac OSX 10.5 users and we're working on it as I write this. If you're a person who has already upgraded and the application is crashing, we're looking into a solution and we hope to have an update shortly.
    Warm regards from your humble community manager,
    Rorey 

  • Why business component does not support generics method parameter

    Hi Folks,
    I have created a business component and in this business component I have added a public method which takes a parameter - List of map (Like List<Map<String, String>> inputListOfMap). Now when I try to run the artifacts for this business component it gives an error
    ERROR
    com.splwg.shared.common.LoggedException: No method declaration for createListElements found matching argument types [List, Element, String, String] with pattern public\s+(final\s+)?(<[^>]*>\s+)?([\w\.]+)\s*(<[\w<>,\s\.]+>)?\s+createListElements\s*\(\s*((\w*\.)+)?(List)(\<[^\>]*\>)?\s+\w+,\s*((\w*\.)+)?(Element)(\<[^\>]*\>)?\s+\w+,\s*((\w*\.)+)?(String)(\<[^\>]*\>)?\s+\w+,\s*((\w*\.)+)?(String)(\<[^\>]*\>)?\s+\w+\s*\)\s*(throws [^\{]+\s*)?[;\{]
    After checking the spl-tool2.2.0 jar class JavaSourceFile.java i am guessing that such method parameters are not supported. It compiles well if its a simple Map or List. Also works fine if I make the method as private. But in this case I cannot use this method from any other class... which I don't want.
    it would be great help if anyone can suggest what needs to be done to overcome this issue
    Following is the method of Business Component
    public void createListElements(List<Map<String, String>> inputListOfMap, Element sourceElement, String groupName, String listElementName) {
              logger.info("createListElements ");
              Element groupElement = null;
              Element listElement = null;
              if(!isBlankOrNull(groupName)){
                   groupElement = sourceElement.addElement(groupName);
              if(notNull(inputListOfMap) && inputListOfMap.size()>0){
                   for (Map<String, String> inputMap : inputListOfMap) {
                        //If group name is provided then put the list element will be within the group element else within the bill element
                        if(notNull(groupElement))
                             listElement = groupElement.addElement(listElementName);
                        else
                             listElement = sourceElement.addElement(listElementName);     
                        for (Map.Entry<String, String> mapEntry : inputMap.entrySet()) {
                             String elementName = mapEntry.getKey();
                             String elementValue = mapEntry.getValue();
                             if(notBlank(elementName) && notBlank(elementValue)){
                                  listElement.addElement(elementName).addText(elementValue);
         }

    Hi Victor,
    the issue is that the archive pool in your NWDS is not set up properly. Could you check the configuration of the development configuration? I guess you are developing in Local Development, right? Please check in the "Component Browser" that the two Software Components "NWMCLIENT" and "XOCA" are present and contain some DCs inside them. If this is not true, than something went wrong with your setup of the IDE. The modifications of the default.confdef are most likely not right.
    Please come back to me if you don´t know how to proceed.
    Regards,
    Stefan

  • Installati​on CD says my operating system does not support

    I just got a used HP pavillion entertainment PC. I put my installation CD for my F4180 printer in and it tells me my operating system is not compatible or something like that. Bottom line I can't use my printer.  Are there new drivers ? I really hope there is a solution. I had it installed on my other laptop, which was caught up in the middle of an altercation. It was replaced with this one. I never thought I'd be saying I miss Vista.

    Would that be the same link I posted above?
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • AFTER downloading Firefox 4.0 I get a "system does not support" message and nothing happens. My old Firefox has been replaced by this one that dosn't work.

    Asked by Firefox to download Firefox 4.0 for OSX I did so. It replaced my old Firefox that worked fine. When I try to open it I get a Firefox "cannot be launched" window and nothing more happens. I tried to redownload Firefox 3.616 but to open it I get a "choose an application" message and I don't know which application to use.

    What is going on? I can't believe that it's virtually impossible to find a place to download the old version without going through all kinds of hoops and hoping that someone was brave enough to face the confusion of getting to the right place in order to find a replacement version. Why is system compatibility check not available before downloading? 4.0 downloaded and installed without ever stopping to check compatibility, which would have saved several hours of trying to figure out how to get the old version back (and it's no easier when you have a brain injury believe me!)
    And I'll still be forced to use this sucky new version in a "short time?" Have you people totally gone off the rails?

  • I downloaded the newest version and there is a Circle with a slash through it over the firefox icon. When I click on it the message is the system does not support this version. How do I reinstall the previous version?

    I updated firefox. When I did there was a circle with a slash (as in No!) across the firefox icon. I clicked on it to open the browser and the error message reads: the application firefox cannot be launched - 10661
    How do I go to the previous version that worked just fine?

    Firefox 3.6.x is the last available from Mozilla for PPC Macs. <br />
    http://www.mozilla.com/en-US/firefox/all-older.html
    For older Macs that aren't supported in Firefox 4+ versions, try TenFourFox for PowerPC's running Mac 10.4.11 & 10.5.8 . <br />
    http://www.floodgap.com/software/tenfourfox/<br />
    http://tenfourfox.blogspot.com/ <br />
    https://code.google.com/p/tenfourfox/wiki/PluginsNoLongerSupported

  • Strange IE ExternalInterface Bug: "Object does not support this property or method"

    We have an application on a relatively slow server (I mention
    the speed because it may be relevant).
    The app is flash 8 and uses ExternalInterface to call a
    javascript function in its parent page. It also used the
    ExternalInterface to receive a call from another function. These
    calls happens separately (the outbound one calls up a list view of
    items, clicking on an item calls up the details in the flash
    movie). In between the calls, the flash movie is hidden by moving
    it off screen using absolute positioning.
    On my local development box (Windows XPSP2) this works fine
    in both directions.
    On our production server (LAMP) this works fine in both
    directions in Firefox 1.5 and 2.0
    BUT while the outbound call from Flash to the page works fine
    in Internet Explorer 6 or 7, the call back from the page to the
    flash movie fails with the error messgage "Object does not support
    this method or property"
    We've tried not hiding the flash so it is always present on
    the page and still the browser > flash communication breaks in
    ie.
    We've tried using both the Adobe active content script and
    swfobject to embed the flash in the page with no difference in the
    resultset. In truth we've given up and gone to a two-page solution,
    reloading the flash from the start each time but I wondered if
    anyone had encountered a similar issue? Can't see why it would work
    perfectly in FF but not in IE.

    Not sure if this is your problem, but you do reference the
    Flash object
    differently, depending on the browser. In a video player we
    made, that uses
    JS to communicate back to Flash, I use a function like this
    to modify the
    variable depending on the browser:
    function changeVideo(xname){
    //ff
    if(window.vplayer){
    window.document["vplayer"].SetVariable("theXML", xname);
    window.document["vplayer"].GotoFrame(2);
    window.document["vplayer"].Play();
    //ie
    if(document.vplayer){
    document.vplayer.SetVariable("theXML", xname);
    document.vplayer.GotoFrame(2);
    document.vplayer.Play();
    The Flash is in a <div> named 'vplayer'
    Dave -
    Head Developer
    http://www.blurredistinction.com
    Adobe Community Expert
    http://www.adobe.com/communities/experts/

Maybe you are looking for