System Dumps when the user is trying to delete the PO

Hi All,
SRM 5.0 ECS
We are trying to delete a PO and the system throws a dump at this time. The PO is still not in R/3, currently its in held status where in we want to delete it and start over from sourcing cockpit. On a high level it says..Buffer table not up to date.
Just wanted to see if anyone else face this similar situation. I know we have function modules to delete the PO. But wanted to find out the root cause of this issue.
Thanks

Hello,
Can you provide the actual dump error?

Similar Messages

How to find the user ID who has deleted the Cycle count document?

I am interested in knowing how we can know the User ID who has deleted the Inventory Cycle count document deleted using LI02N. I have checked the table LINV and also in the storage bin Inventory data. But in storage bin inventory data only counter name is captured if it is assigned during activation of inventory cycle count document. But it may not be necessary that counter has to delete the inventory document.
Kindly advice me how can I get to know who has deleted the Inventory Cycle count document.
Thanks in advance,
Ramesh

no way to ffind this
Have you tried with AUT10 ??
thanks
G. Lakshmipathi

Where to check the user id that who deleted the process chain

Dear Gurus,
If the process chain is deleted accidentally, can we check the user id used to delete. Where can we see the logs/information about that.
Regards
Ram

Hi Ram,
When you delete something in BW/BI, a background job is assigned to the requested task.
To check the same use Tcode SM37, provide details: Job name as BI_DEL*, user name as *, Job status as Finished, and the date or date range in which the process chaing was deleted. Then execute the request.
It will show you all the jobs which were used to delete something in the BW/BI.
Check the log of the request and you will get the required information.
Cheers...
Puneesh

Gateway failed error when users are trying to loginto the portal

Hi,
when the users are trying to log into the portal, the following error msg is displaying. most of the users are facing this problem
"Connect to SAP gateway failed Connect_PM TYPE=B MSHOST=abcxyz144 GROUP=GP1 R3NAME=GP1 MSSERV=sapmsGP1 PCS=1 LOCATION"
is the problem from r/3 system or from portal? if it is from portal, what settings have to be done & if it is r/3 what have to be checked for the particular user to avoid such error message
reply soon as this is very urgent issue.
regards
vv

this is likely to be missing entries in your services file on the portal server.
I would expect to see
sapmsGP1 36xx
or similar. You might also want to make sure that you portal server can resolve the DNS name of your R/3 system. ping abcxyz144 from the portal node to make sure.
Haydn

In vpd_admin user I have just tried to delete the policy and it doesnt dele

In the dtabase in vpd_admin user I have just tried to delete the policy and it doesnt delete.
Just sits there .
(This works on the live system, just checked.)
non working system looks like:
Connected to:
Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
SQL> begin
dbms_rls.drop_policy( 'CF', 'CF_PARTICIPANT_MENTOR', 'CF_PM_POL' );
exception
when others then null;
2 3 4 5 end;
6
begin
ERROR at line 1:
ORA-01013: user requested cancel of current operation
I have looked in the alert_pathway.log , error.log access.log for errors and found no obvious ones.
Not sure where to look,
originally posted in APEX as a problem with APEX
I found this on a 3.2 apex install on a development machine 1 have a number of workspaces.
in one workspace in which I have been developing 3 applications and in which I have VPD enabled.
When I click next after choosing table name in create form form table it times out.
It does not take you to the page where you enter or confirm the page number, page name, etc.
I have tried another workspace on the same server and it works to fcreate the form.
On a separate machine/install the same workspace which does not work above to create form form table does work.
The VPD setup is not identical in this workspace, but very similar.
I surmise it is an issue with that workspace, possibly but not certainly with the new VPD , the table has these settings in vpd
GRANT SELECT ON CF.CF_PARTICIPANT_MENTOR to vpd_admin;
create or replace function cf_admin ( p_schema in varchar2, p_object in varchar2 )
return varchar2
as
l_x number;
begin
SELECT count(MENTOR_ID) into l_x FROM CF.CF_MENTORS where MENTOR_ID = nvl(v('APP_USER'),USER) and ROLES = 0;
if l_x >0 then
return '';
end if;
return 'PARTICIPANT_ID =''CF''';
end;
DBMS_RLS.add_policy
(object_schema => 'CF',
object_name => 'CF_PARTICIPANT_MENTOR',
policy_name => 'CF_PM_POL',
function_schema => 'vpd_admin',
policy_function => 'cf_admin',
statement_types => 'INSERT,DELETE,SELECT,UPDATE');
END;
I have looked in the alert_pathway.log , error.log access.log for errors and found no obvious ones.
Form creation works in other workspace, and in the same workspace on another instance.
Thanks for your guidance
Frank

A free account is never charged, if you have any charges in your Bank account without your knowledge from Adobe, I would request you to provide the following details by private message so that I can get it investigated.
1. Adobe ID
2. Last four digit of credit card
3.Credit card name (visa/mastercard/Amex)
If after investigation we are unable to detect the charges then you need to dispute the amount with Bank as it might can be case of Fraud.
Regards
Rajshree

HT201407 during a update of apple my iphone 3GS crashed an now the operating system wont load up..ive tried to reset the phone to the factory settings it took 4 hours an completed but my iphone still wont come on..what can i do to fix the problem? please

during a update of apple my iphone 3GS crashed an now the operating system wont load up..ive tried to reset the phone to the factory settings using itunes it took 4 hours and completed but my phone still wont come on..what can i do to fix the problem? please help #

In trying to include what information all that I could I should have specified I DON'T KNOW THAT IT WAS DEFINATELY JAILBROKEN when I took it to the apple store they told me there's no way for them to tell if it was jail broken or not. I'm only going by what ppl have told me COULD HAVE BEEN DONE TO THE PHONE. With that said the only thing I know for sure is that the apple tech at the Genius Bar told me that someone took control of my root menu in February & I've had no control of my phone since. I asked him how to regain control & how he knew his exact words were "oh that is out of our scope of capabilities here at this level & you would need an apple engineer to fix it". I said ok then how do I get an apple eng then? He laughed & said you can't!!!! To which I was furious I came home & called apple requesting to speak w/the fraud dept to file a report they said we don't have a fraud dept!! So after a 45 mn phone call again I left w/no answers.
@TJBUSMC1973-
I DON'T HAVE THOUSANDS OF DOLLARS TO SPEND HIRING AN ATTORNEY & Although I appreciate your suggestion I fail to how an attorney would be able to facilitate in any way since there's no suspect. I cannot prove that it's him doing it so I certainly can't pursue legal action w/no proof & no money. :'((
Again I thank you for your advice but I don't think that will help.
I was looking more for a TECHNICAL way to avoid this happening w/a new phone should I buy one or trying to get them out of my phone now! Such as installing some kind of software protection?? Someway to clear out the entire phone (other than factory reset which was done 10 x's w/no success, etc. if this person got in then there HAS TO BE A WAY OF GETTING HIM OUT, right????

QM error "The user profile service service failed the logon. No more threads can be created in the system."

Hi,
I've a client running QM 8.x. QM is working and all recordings are present, it's just that when logging into the server, following error mesasge is displayed:
The user profile service service failed the logon.
No more threads can be created in the system.
Any suggestions on this issue will be greatly appreciated.
thanks,
Kapil

Hi,
Thanks for your post.
Please check event viewer if there are some error logs?
Meanwhile, there is a similar thread has been discussed:
Receiving error about "no more threads"
http://social.technet.microsoft.com/Forums/windowsserver/en-US/9a9e22e4-d947-4d19-b06c-aaadda624dbc/receiving-error-about-no-more-threads?forum=winservergen
Regards.
Vivian Wang

When the user stops a mockery of the Greater Middle East Russia?

Hello, When the user stops a mockery of the Greater Middle East Russia? Why can not I use the
website and shop? Some mistakes! Login impossible as long as you will not change in the address bar
"RU" to "EN". And then, you can not buy anything - "OUR APOLOGIS! Oops!" ... And as always. You are
what your mother - racists?
The Russian market is not concerned, as hundreds of thousands of people have no support. For 10 of
the system LSI is not - at least cancel the need for the use of bis store! Because with the WEB
site, it is all the same does not work!
How reportov need to submit to you a little bit came to life? No browser is not working with your
website and makes it impossible to make purchases.
I demand to stop! And the official response to this issue provide.
thank you.

LSI - wrong, I write "BIS".

I have this message when i try to log onto my home pc "The User Profile Service, service failed the logon. User profile cannot be loaded." can I recover my music and photos from iCloud from another user account?

I get this message when i try to log onto my home pc account "The user Profile Service, service failed the lofon. User profile cannot be loaded" can I recover my data from another/new user account from my iCloud account??

"Jesse.soto1" wrote in message news:1e164fdf-7370-45c0-9bc7-3b58278121c3...
Good Afternoon Everyone,
I am not technologically savvy as a result I'm having trouble understanding previous posts on "The user profile service service failed to logon user profile cannot be loaded." Lingo on domain reset etc, not sure that this pertains to solving my issue
... I cant even get pass the sign in page let alone make changes. I am having this issue with my Dell Studio XPS 1340 with Windows 7 Home Premium. If anyone can provide their two cents I would greatly appreciate.
Very Respectfully,
Jesse
Home Premium cannot logon to a Domain, nor can it be set to try it.
when you get the logon window, try hitting the three-finger salute )Ctrl+Alt+Del) twice – it may bring up the old-style login window – enter your credentials there.
Noel Paton | Nil Carborundum Illegitemi |
CrashFixPC | The Three-toed Sloth

I forget me i colud password and when i'm trying to delet the old account to make new one he asked me to enter the old password or reset it and im lost my old password and mail also so what shall i do ?

i forget me i cloud password and when I'm trying to delete the old account to make new one he asked me to enter the old password or reset it and i lost my old password and mail also so what shall i do ?

If none of the methods in If you forgot your Apple ID password are possible for you, contact Apple support: Apple ID: Contacting Apple for help with Apple ID account security

HT201210 I tried to update to IPad 5.1, but when it finished and tried to restore the backup, it shows me that Itunes could not back up because a session could not be started with iPad. need your help please

I tried to update to IPad 5.1, but when it finished and tried to restore the backup, it shows me that Itunes could not back up because a session could not be started with iPad. need your help please

This has happened to me a couple of times and what I do is quit iTunes and restart my Mac and then try again and then it will work.
If iTunes has already created the backup, you should still be able to restore from the backup when you are connected to iTunes. Right click on the iPad name on the left side of iTunes and select restore from backup. After the process completes, sync with iTunes to transfer all of your apps, music, photos and other media back onto the iPad.

Hallo, - I have a PC running Win 7 Professional. After running Kaspersky Internet Security 2015 the Creative Cloud isn't working any more. I tryed to delete the cloud and reinstall (system error 1) it but no change. I also can't download Flash - even not

Hallo, - I have a PC running Win 7 Professional. After running Kaspersky Internet Security 2015 the Creative Cloud isn't working any more.
I tryed to delete the cloud and reinstall (system error 1) it but no change. I also can't download Flash - even not shutting down Kaspersky. Help Please!!

Hallo, - I have a PC running Win 7 Professional. After running Kaspersky Internet Security 2015 the Creative Cloud isn't working any more.
I tryed to delete the cloud and reinstall (system error 1) it but no change. I also can't download Flash - even not shutting down Kaspersky. Help Please!!

Hi im having huge problems trying to install flash for my mac 10.5 imac, iv gone through the internet and tried all of the solutions, everytime i try to install flash it says cant read the download file, or it just wont install, anybody plz help!

hi im having huge problems trying to install flash for my mac 10.5 imac, iv gone through the internet and tried all of the solutions, everytime i try to install flash it says cant read the download file, or it just wont install, anybody plz help!
iv unistalled flash, iv checked plug ins it just wont work,

It would have been a great help to know precisely what Mac you have, so some of the following may not apply:
You can check here: http://www.adobe.com/products/flash/about/ to see which version you should install for your Mac and OS. Note that version 10,1,102,64 is the last version available to PPC Mac users*. The latest version,10.3.183.23 or later, is for Intel Macs only running Tiger or Leopard, as Adobe no longer support the PPC platform. Version 11.4.402.265 or later is for Snow Leopard onwards.
(If you are running Mavericks: After years of fighting malware and exploits facilitated through Adobe's Flash Player, the company is taking advantage of Apple's new App Sandbox feature to restrict malicious code from running outside of Safari in OS X Mavericks.)
* Unhelpfully, if you want the last version for PPC (G4 or G5) Macs, you need to go here: http://kb2.adobe.com/cps/142/tn_14266.html and scroll down to 'Archived Versions/Older Archives'. Flash Player 10.1.102.64 is the one you download. More information here: http://kb2.adobe.com/cps/838/cpsid_83808.html
You should first uninstall any previous version of Flash Player, using the uninstaller from here (make sure you use the correct one!):
http://kb2.adobe.com/cps/909/cpsid_90906.html
and also that you follow the instructions closely, such as closing ALL applications (including Safari) first before installing. You must also carry out a permission repair after installing anything from Adobe.
After installing, reboot your Mac and relaunch Safari, then in Safari Preferences/Security enable ‘Allow Plugins’. If you are running 10.6.8 or later:
When you have installed the latest version of Flash, relaunch Safari and test.
If you're getting a "blocked plug-in" error, then in System Preferences… ▹ Flash Player ▹ Advanced
click Check Now. Quit and relaunch your browser.
You can also try these illustrated instructions from C F McBlob to perform a full "clean install", which will resolve the "Blocked Plug-in" message when trying to update via the GUI updater from Adobe.
Use the FULL installer for 12.0.0.44: Flash Player 12 (Mac OS X)
And the instructons are here: Snow Leopard Clean Install.pdf
(If you are running a PPC Mac with Flash Player 10.1.102.64 and are having problems with watching videos on FaceBook or other sites, try the following solution which fools the site into thinking that you are running the version 11.5.502.55:)
Download this http://scriptogr.am/nordkril/post/adobe-flash-11.5-for-powerpc to your desktop, unzip it, and replace the current Flash Player plug-in which is in your main/Library/Internet Plug-Ins folder, (not the user Library). Save the old one just in case this one doesn't work.

How do I prevent "The user profile service service failed the log on" error messages?

I work for an organization with approximately 60 staff members across ~80 Windows 7 Professional PCs. Users log in with Active Directory accounts.
Approximately once per month, a random user will get an error message while attempting to log into their machine that says "The user profile service service failed the log on." The solution to resolve this issue is here: http://support.microsoft.com/kb/947215?ppud=4&wa=wsignin1.0.
The problem is that I want to PREVENT this issue from happening, as it is incredibly inconvenient for the user. I had one staff member board a 5-hour plane trip expecting to do work, and once she got in the air she logged in and
received the error message and was unable to use her computer for the trip. I've had others locked out of their computer with deadlines to get things done, while I am at home off the clock. Editing the registry is not an easy fix, and so it's not something
I can just post instructions for in a knowledgebase article.
Does anyone know how to prevent this issue from occurring? I believe that it has something to do with a network-based startup script, or a service trying to connect to our file server, or the computer trying to connect to our ad server. All of these
are blocked by firewalls (unless the user is off-site), and I suspect that the services may be timing out, causing the user profile service service failed the logon error message, but I can't seem to eliminate it, after nearly a year of trying.
90% of the time this problem occurs when the user is off-site, but it has happened while the user is in the office too. Once the user gets this error message, the only way to resolve the problem is to log into their computer as a localadministrator account
and perform the method #1 fix in the knowledgebase article.
Thanks

Have you checked the logged files in event viewer around the time when problem occurred?
Is there any suspicious events like error or warning related to this issue.
Try run Active Directory Best Practice Analyzer:
http://technet.microsoft.com/en-us/library/dd759260.aspx

How to avoid the user accounts to appear in the disk boot while installing Yosemite?

Hi, there is an issue when I encrypt the disk in Yosemite, when I make a clean installation, I first format partition with encryption, install system and restart computer, in the first boot the system ask only for disk password then continue creating user account, when I finish the configuration and restart the computer, the first boot screen ask me for disk password or user password, this is wrong, I want that the system ask me first the disk password and then the users accounts passwords to start the session as it was in Mavericks, so I try different ways to do this.
1. In clean Installation is not working, every time that create a user it appears in the first boot screen, in which the system must ask only for disk password.
2. In upgrade Installation with a computer already encrypted, it appears to works properly but if you create a new user it appears in the first boot screen.
3. I test this by doing a clean installation without encryption, create a user and make an image of this partition, then I copy the dwg image to an external disk, then start computer with an USB with Yosemite, using disk utility I erase the partition and format it with encryption, then restore the dwg image in this partition, it looks that works properly, but if I create a New User then the new user appears in the first boot screen when only must ask for disk password.
Can someone help me with this issue please?
If there is someone of Mac can you tell me if this is going to be corrected in this version? or we must wait for the next OS X version.
Thank You.

Hi, there is an issue when I encrypt the disk in Yosemite, when I make a clean installation, I first format partition with encryption, install system and restart computer, in the first boot the system ask only for disk password then continue creating user account, when I finish the configuration and restart the computer, the first boot screen ask me for disk password or user password, this is wrong, I want that the system ask me first the disk password and then the users accounts passwords to start the session as it was in Mavericks, so I try different ways to do this.
1. In clean Installation is not working, every time that create a user it appears in the first boot screen, in which the system must ask only for disk password.
2. In upgrade Installation with a computer already encrypted, it appears to works properly but if you create a new user it appears in the first boot screen.
3. I test this by doing a clean installation without encryption, create a user and make an image of this partition, then I copy the dwg image to an external disk, then start computer with an USB with Yosemite, using disk utility I erase the partition and format it with encryption, then restore the dwg image in this partition, it looks that works properly, but if I create a New User then the new user appears in the first boot screen when only must ask for disk password.
Can someone help me with this issue please?
If there is someone of Mac can you tell me if this is going to be corrected in this version? or we must wait for the next OS X version.
Thank You.

System Dumps when the user is trying to delete the PO

Similar Messages

Maybe you are looking for