System freeze after resume from suspend

I am running arch for about 5 month now and I always had freezes after resuming from suspend (to ram - systemctl suspend) every once in a while (like once a week or less). The freezes increased massively over the last month or so and for about 2 weeks now it happens 95% of the times I resume from suspend.
The monitor turns on and shows things exactly how I left them, but is completely unresponsible EXCEPT for I can switch to another TTY (Ctrl+Shift+F*), however I cannot type or do anything in it...
It doesnt have anything to do with the X server as it also happens after I suspend from TTY (without any X running).
I also checked journalctl -b -1 (shows previous boot, since I always have to hard-reset the system) but it doesnt show anything after:
Mar 13 17:16:54 Ununhaswellium systemd-sleep[3624]: Suspending system...
(the suspend event before resuming)
Are there any log files that could give a hint on what exactly goes on after the resume?
Im running the latest official 3.13.6-1 kernel and updated my BIOS to the latest beta version yesterday - didnt help either...
Ive read pretty much every thread on the internet by now about freezes after resume from suspend but none really helped
Last edited by CharlieBra7o (2014-03-15 09:58:51)

Thank you for the link, unfortunally I don't have a NVIDIA card but use the Intel IGP (HD4600, Haswell) - maybe I should have mentioned that...
And other than in this bug report I cannot kill X or anything because neither other TTYs work - I cannot input anything (although the hotkeys work weird enough) nor is SSHD running because the system is completely frozen...
Very funny thing is that for the last 2 days my system didnt freeze once (suspended about 6-7 times during one boot), even though for the 2 weeks prior to that, it froze EVERY SINGLE TIME I resumed from suspend, it didnt work once...

Similar Messages

System freeze after resume from suspend to RAM

Hi,
since quite a while (probably ever) I am unable to suspend my computer to RAM because everytime it freezes a few seconds after resuming, never to become alive again until a reboot. After some investigation, I managed to get kernel logs by taking a picture of my screen. The logs were not written to disk, hence I didn't see anything before. I had to write these by hand, I hope I didn't insert any mistakes:
kernel: sas: Enter sas_scsi_recover_host busy: 2 failed: 2
kernel: sas: trying to find task 0xfff880008b5b680
kernel: sas: sas_scsi_find_task: aborting task 0xfff880008b5b680
kernel: sas: sas_scsi_find_task: task 0xfff880008b5b680 is aborted
kernel: sas: sas_eh_handle_sas_errors: task 0xfff880008b5b680 is aborted
kernel: sas: trying to find task 0xffff8804606ccb40
kernel: sas: sas_scsi_find_task: aborting task 0xffff8804606ccb40
kernel: sas: sas_scsi_find_task: task 0xffff8804606ccb40 is aborted
kernel: sas: sas_eh_handle_sas_errors: task 0xffff8804606ccb40 is aborted
kernel: sas: ata7: end_device-0:0: cmd error handler
kernel: sas: ata8: end_device-0:1: cmd error handler
kernel: sas: ata7: end_device-0:0: dev error handler
kernel: ata7.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
kernel: ata7.00: failed command: READ VERIFY SECTOR(S)
kernel: ata7.00: cmd 40/00:01:00:00:00/00:00:00:00:00/e0 tag 11
res 40/00:48:a0:79:88/00:00:07:00:00/40 Emask 0x4 (timeout)
kernel: ata7.00: status { DRDY }
kernel: ata7: hard resetting link
kernel: sas: ata8: end_device-0:1: dev error handler
kernel: ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
kernel: ata8.00: failed command: READ VERIFY SECTOR(S)
kernel: ata8.00: cmd 40/00:01:00:00:00/00:00:00:00:00/e0 tag 11
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
kernel: ata8.00: status { DRDY }
kernel: ata8: hard resetting link
This issue seems to be related to disk failures like bad sectors but I am quite sure, that my SSDs are in a good shape. I ran some SMART tests, they all turned out to be okay. Suspending from my dual-booted Windows works fine as well (although if the bad sector would be on the linux partition, it would probably not affect Windows).
Here's my setup:
$ lsblk -St
NAME HCTL TYPE VENDOR MODEL REV TRAN NAME ALIGNMENT MIN-IO OPT-IO PHY-SEC LOG-SEC ROTA SCHED RQ-SIZE RA WSAME
sda 1:0:0:0 disk ATA Corsair Force 3 2 sata sda 0 512 0 512 512 0 cfq 128 128 0B
sdb 7:0:0:0 disk ST1000DM 003-9YN162 NDP3 usb sdb 0 512 0 512 512 1 cfq 128 128 0B
sdc 0:0:0:0 disk ATA OCZ-REVODRIVE3 2.25 sas sdc 0 512 0 512 512 0 cfq 128 128 0B
sdd 0:0:1:0 disk ATA OCZ-REVODRIVE3 2.25 sas sdd 0 512 0 512 512 0 cfq 128 128 0B
sr0 2:0:0:0 rom TSSTcorp CDDVDW SH-222AL SB00 sata sr0 0 512 0 512 512 1 cfq 128 128 0B
$ lsblk -f
NAME FSTYPE LABEL UUID MOUNTPOINT
sda
├─sda1 ntfs Recovery 567437B974379B27
├─sda2 vfat DC2D-099E /boot
├─sda3
├─sda4 ntfs FEBED982BED933BD
├─sda5 ext4 arch 41bad924-84a2-4e0a-9cd4-4ea723a2a5a3 /
└─sda6 swap 793fb3c1-8bec-4023-a7c3-ee94eee2e67a [SWAP]
sdb
└─sdb1 ntfs HDDRIVE2GO 2212E50812E4E231
sdc
└─sdc1 linux_raid_member home:0 208937dc-2904-e71c-435a-9928671e07a3
└─md0 ext4 revodrive ffe9d38f-87f2-44e1-ae26-f36c910af3c5 /home
sdd
└─sdd1 linux_raid_member home:0 208937dc-2904-e71c-435a-9928671e07a3
└─md0 ext4 revodrive ffe9d38f-87f2-44e1-ae26-f36c910af3c5 /home
I am not sure which one of the disks causes the freeze but I assume it's the revodrive because the logs talk about two drives. The Revodrive internally holds two drives, which are set up to operate in a RAID 0. Windows is installed on the Corsair drive, and has no access to the Revodrive. However, I used to run Windows on the Revodrive a few years ago, and it worked just fine.
Another interesting thing is that when I try to test suspend to RAM, the system does not freeze, nor produce errors. This only happens if none is written to /sys/power/pm_test (which means no automated wake-up, no testing).
Any ideas on how I could narrow down this issue? Thanks a lot!
EDIT
I just checked and confirmed that this issue is originating from the OCZ Revodrive:
$ dmesg | grep ata7.00 | head
[ 7.136432] ata7.00: ATA-8: OCZ-REVODRIVE3, 2.25, max UDMA/133
[ 7.136436] ata7.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 7.146442] ata7.00: configured for UDMA/133
$ dmesg | grep ata8.00 | head
[ 7.310018] ata8.00: ATA-8: OCZ-REVODRIVE3, 2.25, max UDMA/133
[ 7.310023] ata8.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 7.320022] ata8.00: configured for UDMA/133
Last edited by tuttiarch (2015-01-31 15:54:29)

Thank you for the link, unfortunally I don't have a NVIDIA card but use the Intel IGP (HD4600, Haswell) - maybe I should have mentioned that...
And other than in this bug report I cannot kill X or anything because neither other TTYs work - I cannot input anything (although the hotkeys work weird enough) nor is SSHD running because the system is completely frozen...
Very funny thing is that for the last 2 days my system didnt freeze once (suspended about 6-7 times during one boot), even though for the 2 weeks prior to that, it froze EVERY SINGLE TIME I resumed from suspend, it didnt work once...

[SOLVED]pc freezes after resuming from suspend.

When I upgraded kernel from linux-3.3.8-1 to linux-3.4.2-2 or later , PC freezes after resuming.
Monitor comes back and kde requires passward , but after few seconds , everything freezes.
keyboard and mouse won't respond.
There is no log after resuming.
Is there anybody who have same trouble?
CPU intel core i7 2600k
MB asrock H67M-GE
/var/log/pm-suspend.log
Initial commandline parameters:
Thu Jun 21 16:52:33 JST 2012: Running hooks for suspend.
Running hook /usr/lib/pm-utils/sleep.d/00logging suspend suspend:
Linux myhost 3.4.3-1-ARCH #1 SMP PREEMPT Mon Jun 18 08:28:29 CEST 2012 x86_64 GNU/Linux
Module Size Used by
w83627ehf 31388 0
hwmon_vid 3196 1 w83627ehf
xt_hl 1369 6
ip6t_rt 2112 3
nf_conntrack_ipv6 6650 7
nf_defrag_ipv6 6401 1 nf_conntrack_ipv6
ipt_REJECT 2281 1
xt_LOG 11975 9
xt_limit 2041 12
xt_tcpudp 2503 18
xt_addrtype 2853 4
xt_state 1295 14
ip6table_filter 1396 1
ip6_tables 18198 2 ip6table_filter,ip6t_rt
nf_conntrack_netbios_ns 1077 0
nf_conntrack_broadcast 1285 1 nf_conntrack_netbios_ns
nf_nat_ftp 1668 0
nf_nat 15100 1 nf_nat_ftp
nf_conntrack_ipv4 6871 9 nf_nat
nf_defrag_ipv4 1339 1 nf_conntrack_ipv4
nf_conntrack_ftp 6261 1 nf_nat_ftp
nf_conntrack 61584 8 nf_nat_ftp,nf_conntrack_netbios_ns,nf_nat,xt_state,nf_conntrack_broadcast,nf_conntrack_ftp,nf_conntrack_ipv4,nf_conntrack_ipv6
iptable_filter 1456 1
ip_tables 16946 1 iptable_filter
x_tables 16954 12 ip6table_filter,xt_hl,ip_tables,xt_tcpudp,xt_limit,xt_state,xt_LOG,iptable_filter,ip6t_rt,ipt_REJECT,ip6_tables,xt_addrtype
snd_hda_codec_hdmi 23672 1
snd_hda_codec_realtek 60377 1
vboxdrv 1792262 0
acpi_cpufreq 5933 1
aesni_intel 43154 0
mperf 1267 1 acpi_cpufreq
snd_hda_intel 24053 4
aes_x86_64 7508 1 aesni_intel
ppdev 5902 0
aes_generic 26138 2 aesni_intel,aes_x86_64
ghash_clmulni_intel 4237 0
r8169 49354 0
i915 438164 3
video 11307 1 i915
i2c_i801 8180 0
i2c_algo_bit 5391 1 i915
drm_kms_helper 33051 1 i915
drm 208958 4 i915,drm_kms_helper
parport_pc 30765 0
intel_agp 10936 1 i915
mei 32152 0
psmouse 70792 0
pcspkr 1899 0
processor 26567 1 acpi_cpufreq
evdev 9754 6
button 4502 1 i915
intel_gtt 14047 3 i915,intel_agp
parport 31395 2 ppdev,parport_pc
i2c_core 20369 5 drm,i915,i2c_i801,drm_kms_helper,i2c_algo_bit
serio_raw 4653 0
cryptd 8741 2 ghash_clmulni_intel,aesni_intel
coretemp 5654 0
iTCO_wdt 12813 0
mii 4123 1 r8169
iTCO_vendor_support 1929 1 iTCO_wdt
snd_hda_codec 94273 3 snd_hda_codec_realtek,snd_hda_codec_hdmi,snd_hda_intel
crc32c_intel 1987 0
snd_hwdep 6300 1 snd_hda_codec
snd_pcm 74958 4 snd_hda_codec_hdmi,snd_hda_codec,snd_hda_intel
snd_page_alloc 7217 2 snd_pcm,snd_hda_intel
snd_timer 18966 2 snd_pcm
snd 58997 13 snd_hda_codec_realtek,snd_hwdep,snd_timer,snd_hda_codec_hdmi,snd_pcm,snd_hda_codec,snd_hda_intel
soundcore 5410 1 snd
microcode 12185 0
ext4 424175 2
crc16 1359 1 ext4
jbd2 73919 1 ext4
mbcache 5977 1 ext4
usbhid 36430 0
hid 85285 1 usbhid
ehci_hcd 41154 0
usbcore 147533 3 ehci_hcd,usbhid
usb_common 954 1 usbcore
floppy 58615 0
sr_mod 14823 0
cdrom 35648 1 sr_mod
sd_mod 29239 4
ahci 20549 4
libahci 20023 1 ahci
libata 167611 2 ahci,libahci
scsi_mod 132942 3 libata,sd_mod,sr_mod
total used free shared buffers cached
Mem: 7900332 743308 7157024 0 34932 257560
-/+ buffers/cache: 450816 7449516
Swap: 15359996 0 15359996
/usr/lib/pm-utils/sleep.d/00logging suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/00powersave suspend suspend:
/usr/lib/pm-utils/sleep.d/00powersave suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/01grub suspend suspend:
/usr/lib/pm-utils/sleep.d/01grub suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/49bluetooth suspend suspend:
/usr/lib/pm-utils/sleep.d/49bluetooth suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/75modules suspend suspend:
/usr/lib/pm-utils/sleep.d/75modules suspend suspend: success.
Running hook /etc/pm/sleep.d/90alsa suspend suspend:
/etc/pm/sleep.d/90alsa suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/90clock suspend suspend:
/usr/lib/pm-utils/sleep.d/90clock suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/94cpufreq suspend suspend:
/usr/lib/pm-utils/sleep.d/94cpufreq suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/95led suspend suspend:
/usr/lib/pm-utils/sleep.d/95led suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/98video-quirk-db-handler suspend suspend:
Kernel modesetting video driver detected, not using quirks.
/usr/lib/pm-utils/sleep.d/98video-quirk-db-handler suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/99video suspend suspend:
kernel.acpi_video_flags = 0
/usr/lib/pm-utils/sleep.d/99video suspend suspend: success.
Thu Jun 21 16:52:33 JST 2012: performing suspend
Last edited by remingtontonpon (2012-07-25 01:58:04)

In my case, monitor freezes too.
And I have only one PC, so i can't try ssh.
I logged into runlevel3 and try
sudo pm-suspend
and it works fine. So it seems this trouble caused only in runlevel5.
I also tried following command in runlevel5
# echo freezer > /sys/power/pm_test
# echo mem > /sys/power/state
# echo devices > /sys/power/pm_test
# echo mem > /sys/power/state
# echo platform > /sys/power/pm_test
# echo mem > /sys/power/state
# echo processors > /sys/power/pm_test
# echo mem > /sys/power/state
# echo core > /sys/power/pm_test
# echo mem > /sys/power/state
Everything works fine but sudo pm-suspend failed.
Last edited by remingtontonpon (2012-06-25 08:18:26)

Touchpad permanently not working after resuming from suspend

I lost touchpad and trackpoint functionality after resuming from suspend on my ThinkPad E530 (3259CTO).
Even after a complete power off (with the battery removed), the touchpad is detected but doesn't send any event, and the trackpoint is not detected.
In Windows, in the UltraNav control panel, the touchpad is marked as enabled and cannot be disabled, the trackpoint is grayed.
In Linux, I can see the difference is kernel traces when the driver is loaded.
Before : psmouse serio1: synaptics: Touchpad model: 1, fw: 8.0, id: 0x1e2b1, caps: 0xd001a3/0x940300/0x120c00
Now : psmouse serio1: synaptics: Touchpad model: 1, fw: 8.0, id: 0x1e2b1, caps: 0xd001a3/0x0/0x0
After looking at https://gerrit.chromium.org/gerrit/#/c/31105/ and Synaptics public documentation, I was able to get more information : the device status register (F01_RMI_Data0) is 0x45, which means the touchpad is in flash programming mode since there is a firmware CRC failure.
It looks like http://code.google.com/p/chromium-os/issues/detail?id=24298, so it's probably not a Lenovo specific problem, but a bug in Synaptics firmware.
Can Lenovo provide the firmware to flash like http://forums.lenovo.com/t5/X-Series-ThinkPad-Laptops/X220-Touchpad-jumpy-response-when-used-with-90... which would hopefully make my touchpad working again ?
The original firmware should work, but an updated one would be better, if it avoids losing the touchpad again later.

I don't know why, but this made me think of the episode of the simpsons when home tries to get over 300 pounds so he can work from home. When he tries to dial the phone he hist all the buttons and gets a recording that says "We're sorry, you're fingers are too fat. To obtain a special dialing wand, please mash the keypad now."
BTW, sorry I can't help... but at least I am entertained easily.

No sound in Flash after resuming from suspend

After I resume from a suspend or sleep there is no sound in Flash and there is no networking.
The only way is to restart my browser to reestablish the sound.
Is there a solution for this problem?
Thanks.

This does not happen with Firefox in Ubuntu, as an example. So something must be wrong somewhere.
I can confirm this happens to me in Arch with Firefox 4.0b7 and Chromium 7.0.517.44. I noticed that after resuming from suspend, not only sound (in Flash) is missing, but Flash is behaving weirdly (YouTube video plays much faster) and CPU usage goes crazy without doing any particular action.
Last edited by Niavlys (2010-12-05 23:34:30)

Cannot connect to X server after resume from suspend

Hello,
i'm a happy user of arch and i3, one and only thing that is not working correctly is that sometimes after resume from sleep (closing the lid, and then opening) I am not able to start any programs. this happens about 50% of the time. when it happens i have to exit i3 and login again, and everything works ok then.
I'd be grateful for any suggestion how can I debug and solve this problem.
y
Last edited by yemu (2014-04-09 08:53:12)

the error was, after running xterm:
No protocol specified
xterm: Xt error: Can't open display: :0.0
after running scrot
No protocol specified
giblib error: Can't open X display. It *is* running, yeah?
after running firefox
(process:2559): GLib-CRITICAL **: g_slice_set_config: assertion 'sys_page_size == 0' failed
No protocol specified
No protocol specified
Error: cannot open display: :0.0
but I think I was able to fix the problem.
when I was browsing the internet for solution, I stumbled upon an info about similar problem caused by the hostname set to localhost. I checked my system, and apparently I haven't set my host name during install, and it was still localhost, so I changed it. and after that I tried suspending several times, and the problem never occured. I'll test in upcoming days, and if it works I will change the thread title to [SOLVED].
Last edited by yemu (2014-04-10 07:40:47)

Desktop visible after resume (from suspend) and before screen is locke

My desktop becomes visible for brief period (<1s) when the system resumes from suspended state. My desktop env. is XFCE4, it happens with both xscreensaver and gnome-screensaver (also with slimlock and i3lock), therefore I think it's not locker dependent. It's a major security flaw because sensitive information may be exposed (not just porn). Using both XFCE provided locking facilities (suspend/resume lock options in Power Manager and Session settings), and systemd suspend/resume hooks yields same result. I remember back then when I was using Gnome, I haven't had this issues. Does anyone have any idea how to prevent this desktop expose?

Have you tried this --> https://wiki.archlinux.org/index.php/Pm … or_suspend ?

Dell Inspiron 7537 - Sound only works after resuming from suspend

Hello,
So my sound does not work after boot, only once I resume from suspend. So, once I turn on my computer, and I load sound, nothing work (everything is unmuted in Alsa) - then if I suspend my computer and resume - the sound works every time.
I use Alsa and here is my amixer output (before and after suspend is the same) :
eric@archlinux ~> amixer
Simple mixer control 'Master',0
Capabilities: pvolume pswitch pswitch-joined
Playback channels: Front Left - Front Right
Limits: Playback 0 - 65536
Mono:
Front Left: Playback 5358 [8%] [off]
Front Right: Playback 5358 [8%] [off]
Simple mixer control 'Capture',0
Capabilities: cvolume cswitch cswitch-joined
Capture channels: Front Left - Front Right
Limits: Capture 0 - 65536
Front Left: Capture 11003 [17%] [on]
Front Right: Capture 11003 [17%] [on]
What gets rebooted when I do a suspend, but not when I reboot? Does not seem to make sense to me.
Thanks.

Is there any additional information I can include to help figure this out?

No sound in flash after resume from suspend (linux debian)

Using 10.0.r42, iceweael and linux 2.6.32 kernel.
If I close the lid on my HP laptop which causes it to suspend, and the resume from suspend, other audio playing programs work, but I cant get any sound from iceweasel/flash until I kill all instances of iceweasel and restart the web browser.
Is this a bug that is tied to flash?

What a coincidence, mine is also from scratch.
Good question about how sound is handled. ldd libflashplayer.so doen't give an answer.
So somehow xulrunner can catch the sound.
Libxpcom is linked to libasound. components/libmozgnome.so to libesd in my case.
Maybe you can try fuser /dev/snd/* to identify which process is locking the device.

[SOLVED] After resume from suspend to RAM, system is slow / unstable

Hello,
I have come across some strangeness when trying to suspend my system. The
computer is a lenovo U350. I have read a lot of threads on these subjects,
but I never found one that quite matched the experiences I'm having, so I felt
compelled to make a new post.
Here's what's going on: I boot into the terminal, and then run pm-suspend.
Within a few seconds, the computer goes to sleep, just as I had hoped. The
problem is that my computer seems a little groggy when I wake it back up.
Usually, when running a command like ps aux | less, the screen fills up very
quickly. After I resume from sleep, running ps aux | less is noticeably slow.
It takes a full second (+/- epsilon) to fill the screen. Other symptoms: if I
suspend / resume in the terminal, and then start a window manager (KDE), the
graphics will be slow and choppy, and when I try to exit the window manager, I
usually end up having to perform the dreaded REISUB after getting stuck on a
blank screen with a non-blinking cursor in the upper left hand corner.
Suspend / resume from KDE will result in either the black, non-responsive
screen as soon as I try to resume, or in the choppy graphics, followed by the
non-responsive black screen when I log out.
I looked at the process list before and after, and noticed that when the
system is first resumed, there are around 50-60 additional kworker processes
running than when I put it to sleep. I don't know if this is normal or not.
Also, hci0 has been killed, and a new hci0 process has taken its place. The
same goes for one of the udevd processes. About 40-50 of the kworker
processes finish after a few minutes, but this does not change the slowness of
ps aux | less, nor does it help with my window manager issues.
I ran a few (not so precise) performance tests before and after doing a
suspend, and got the same results (the test was just to compile some LaTeX,
which took about 4-5 seconds either way).
I examined the pm-suspend.log, and everything looked peachy. All of the
hooks returned success for the suspend, as well as the resume. I'm happy to
post this if needed. I did not change any of the default settings for
pm-suspend.
Anyhow, I've read a lot of threads, and seen a lot of suggestions, e.g.:
https://bbs.archlinux.org/viewtopic.php?id=137682
https://bbs.archlinux.org/viewtopic.php?id=136292 (use vbetool?)
https://bbs.archlinux.org/viewtopic.php?id=126174 (suspend tons of modules?)
https://bbs.archlinux.org/viewtopic.php?id=131827 (hpet=disable ?)
However, I'm not that confident in any of them, since no one had quite the
same issue. I was hoping that someone could point me in the right direction
before I start blindly walking through all the candidate fixes and risk
unleashing chaos into my system. Many thanks in advance for your help.
Oh, and in case this post was not yet long enough, here is some system
information:
lspci:
00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07)
00:02.0 VGA compatible controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07)
00:02.1 Display controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07)
00:1a.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 03)
00:1a.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 03)
00:1a.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 03)
00:1a.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 03)
00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03)
00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 03)
00:1c.1 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 2 (rev 03)
00:1c.2 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 3 (rev 03)
00:1c.3 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 4 (rev 03)
00:1c.4 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 5 (rev 03)
00:1c.5 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 6 (rev 03)
00:1d.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 03)
00:1d.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 03)
00:1d.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 03)
00:1d.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 03)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 93)
00:1f.0 ISA bridge: Intel Corporation ICH9M-E LPC Interface Controller (rev 03)
00:1f.2 SATA controller: Intel Corporation 82801IBM/IEM (ICH9M/ICH9M-E) 4 port SATA Controller [AHCI mode] (rev 03)
00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 03)
03:00.0 Network controller: Intel Corporation PRO/Wireless 5100 AGN [Shiloh] Network Connection
08:00.0 Ethernet controller: Broadcom Corporation NetLink BCM57780 Gigabit Ethernet PCIe (rev 01)
lsmod:
Module Size Used by
aes_x86_64 7508 3
cryptd 8309 0
aes_generic 26138 1 aes_x86_64
coretemp 5590 0
cpufreq_ondemand 6164 2
acpi_cpufreq 5877 1
mperf 1275 1 acpi_cpufreq
freq_table 2515 2 acpi_cpufreq,cpufreq_ondemand
arc4 1410 2
joydev 9895 0
snd_hda_codec_hdmi 24121 1
iwlwifi 248196 0
i915 420018 3
snd_hda_codec_conexant 47300 1
uvcvideo 64311 0
mac80211 228527 1 iwlwifi
videodev 82101 1 uvcvideo
snd_hda_intel 23375 0
snd_hda_codec 89389 3 snd_hda_intel,snd_hda_codec_conexant,snd_hda_codec_hdmi
broadcom 7270 0
tg3 134884 0
ideapad_laptop 8534 0
snd_hwdep 6389 1 snd_hda_codec
snd_pcm 74780 3 snd_hda_codec,snd_hda_intel,snd_hda_codec_hdmi
snd_page_alloc 7153 2 snd_pcm,snd_hda_intel
snd_timer 19544 1 snd_pcm
snd 59214 7 snd_timer,snd_pcm,snd_hwdep,snd_hda_codec,snd_hda_intel,snd_hda_codec_conexant,snd_hda_codec_hdmi
iTCO_wdt 11885 0
v4l2_compat_ioctl32 8316 1 videodev
i2c_i801 8187 0
i2c_algo_bit 5263 1 i915
drm_kms_helper 26137 1 i915
intel_agp 10904 1 i915
btusb 11385 0
cfg80211 172260 2 mac80211,iwlwifi
bluetooth 151999 1 btusb
sparse_keymap 3120 1 ideapad_laptop
soundcore 6210 1 snd
drm 188499 4 drm_kms_helper,i915
rfkill 15498 3 bluetooth,cfg80211,ideapad_laptop
serio_raw 4429 0
iTCO_vendor_support 1961 1 iTCO_wdt
media 10597 2 videodev,uvcvideo
psmouse 61311 0
libphy 16985 2 tg3,broadcom
i2c_core 20492 6 drm,drm_kms_helper,i2c_algo_bit,i2c_i801,videodev,i915
intel_gtt 14519 3 intel_agp,i915
pcspkr 1819 0
evdev 9530 8
thermal 7799 0
wmi 8475 0
battery 6453 0
ac 2344 0
video 11164 1 i915
button 4470 1 i915
processor 25582 3 acpi_cpufreq
ext4 420412 3
crc16 1359 2 ext4,bluetooth
jbd2 71499 1 ext4
mbcache 5881 1 ext4
sd_mod 28307 5
ahci 20037 4
libahci 19559 1 ahci
libata 166654 2 libahci,ahci
scsi_mod 133676 2 libata,sd_mod
uhci_hcd 23116 0
ehci_hcd 40698 0
usbcore 146113 5 ehci_hcd,uhci_hcd,btusb,uvcvideo
usb_common 954 1 usbcore
Last edited by wes (2012-04-06 21:34:43)

I did try reinstalling, actually. But I did not think to remove the battery and the ram... I'm very curious now: what is the rationale / intuition for that? Or is it just that empirical evidence suggests this may be a good idea?
Anyhow, the reinstall by itself did not help. I tried it out with a pretty bare-bones setup and had the same results. Here are a few other things I noticed:
- After the suspend, one of the cores is always running at the maximum clock frequency, according to powertop (although, according to ps aux, no one is doing any work).
- Even if I ssh to a nearby machine, I get the same experience when running `ls`. The screen fills very slowly. That narrows things down a little bit, but I was already guessing it would be graphics-related.
I have also tried a few random kernel boot parameters after reading things online, but none of those worked, and several stopped the machine from booting at all.
Thanks for your help.

10.6.4 complete system freeze when resuming from screensaver-VMWare Fusion

I have a Macbook Pro, 3,1. I just upgraded to 10.6.4 and noticed the following symptoms:
Shortly after launching VMWare Fusion 3.1 running a Windows XP VM (from a Bootcamp partition), a series of pop up messages were complaining about a bad OpenGL driver. The message popped up repeatedly and wouldn't let me out, even though I kept pressing "Ok". I had to force quit Fusion, which caused a chkdsk on relaunch of the XP VM.
After a complete reboot, I started VMWare again. The Fusion complaints haven't shown up again, but when resuming from the screensaver, the system either completely freezes up, or the screen login window starts to flash rapidly and seize up. I'm running Spaces with 6 virtual screens. Whether I'm in the Fusion Spaces screen or any other Spaces screen, the system freaks out when resuming from a screensaver.
I use this system at work, so I have to be able to lock my screen when I leave my cube. The only way I've been able to ensure the system doesn't freeze up and cause a hard reset of the XP VM is to completely disable the screensaver and power saver features, such as Start Screen Saver = Never, Computer Sleep = Never, Display Sleep = Never and launch the login window by clicking on my user name in the upper right corner of the screen on the menu bar. Even that causes a sluggish screen and I'm not confident it will keep working. I also made sure (from day one) that the Windows XP screensaver functions were all completely disabled. I prefer to use the OS X screensaver for everything, if for no other reason than having a single screen locking/unlocking point for when I step away.
This was all working properly in 10.6.3. The only nit-nat I noticed about Fusion in 10.6.3 was that it had to be launched in the "Primary Window", which seems to be the upper leftmost Spaces desktop. If I ever moved it to, or started in any other Spaces desktop, it would also exhibit the same random lockups. Keeping it in the "primary" space seems to have stopped the lockups.
I noticed that there seemed to be significant updates to the OpenGL drivers in 10.6.4. I am experiencing an unfortunate side effect of these updates and hope I'm not alone and that a fix is coming soon. Looking at the other posts, there seem to be a lot of similar problems. I wanted to describe my configuration in case the Apple dev team reads these posts. Thanks.

I ended up doing an erase and fresh install of Snow Leopard (10.6.0), upgraded to 10.6.4 with the combo update, then a fresh install of all my apps, including VMware 3.1. Everything has been solid for 2 days now. I'm guessing that my system had a magic combination of issues that weren't visible in 10.6.3 but became obvious only after upgrading to 10.6.4. I had been upgrading my OS since 10.5.0 over the last 2 years and needed to do a clean re-install for some time now.
I'm guessing that others who are noticing problems with the 10.6.4 update have a similar situation with their installations. Think back on all the times a software installation failed, or the system required a hard boot. Plus, I had a lot of 3rd party apps on my box that never posted updates for later Snow Leopard releases, so who knows? Anyway, it's good to have a clean and snappy system again. A lot of my apps launch a lot faster now and survive the screen saver and power saver modes just fine.
Message was edited by: mausoleum

Keyboard Very Glitchy + Speakers Clicking After Resume From Suspend

Hello,
Didn't know exactly where to post this, so I chose newbie. I have a very strange issue regarding suspending and resuming on my Arch64 box. When I resume from a suspend, everything seems to work okay, however first I hear this from my speakers:
*pop* [pause] *pop*
And then, when I use the keyboard, it responds very strangely. Every key still types what it should, but letters will be frequently either skipped over to carried out longer.
Here's a good example:
If I type this before a suspend: "Arch Linux rules!"
It may come out like this after the suspend: "ArcLinux ruuuuuuuuul!"
See what's happening?
So when this happens I must reboot, and then it works fine again.
My machine is an HP Pavilion DV7 6199us running on Intel graphics (sna acceleration) with the Radeon card disabled with acpi_call.
Xorg.0.log:
[ 2493.450]
X.Org X Server 1.12.3
Release Date: 2012-07-09
[ 2493.450] X Protocol Version 11, Revision 0
[ 2493.450] Build Operating System: Linux 3.4.4-3-ARCH x86_64
[ 2493.450] Current Operating System: Linux alex-archlinux 3.4.6-1-ARCH #1 SMP PREEMPT Fri Jul 20 08:21:26 CEST 2012 x86_64
[ 2493.450] Kernel command line: root=/dev/disk/by-uuid/579476a1-f5d2-432b-b2f7-d543e65c579b modprobe.blacklist=radeon ro acpi_osi=Linux acpi_backlight=vendor
[ 2493.450] Build Date: 09 July 2012 03:59:39PM
[ 2493.450]
[ 2493.450] Current version of pixman: 0.26.2
[ 2493.450] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 2493.450] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 2493.451] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Jul 25 22:56:28 2012
[ 2493.451] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 2493.451] (==) No Layout section. Using the first Screen section.
[ 2493.451] (==) No screen section available. Using defaults.
[ 2493.451] (**) |-->Screen "Default Screen Section" (0)
[ 2493.451] (**) | |-->Monitor "<default monitor>"
[ 2493.451] (==) No device specified for screen "Default Screen Section".
Using the first device section listed.
[ 2493.452] (**) | |-->Device "Intel Graphics"
[ 2493.452] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 2493.452] (==) Automatically adding devices
[ 2493.452] (==) Automatically enabling devices
[ 2493.452] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 2493.452] Entry deleted from font path.
[ 2493.452] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 2493.452] Entry deleted from font path.
[ 2493.452] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 2493.452] Entry deleted from font path.
[ 2493.452] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 2493.452] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 2493.452] Entry deleted from font path.
[ 2493.452] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 2493.452] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/
[ 2493.452] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 2493.452] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 2493.452] (II) Loader magic: 0x7c8b00
[ 2493.452] (II) Module ABI versions:
[ 2493.452] X.Org ANSI C Emulation: 0.4
[ 2493.452] X.Org Video Driver: 12.0
[ 2493.452] X.Org XInput driver : 16.0
[ 2493.452] X.Org Server Extension : 6.0
[ 2493.454] (--) PCI:*(0:0:2:0) 8086:0116:103c:3389 rev 9, Mem @ 0xc0000000/4194304, 0xb0000000/268435456, I/O @ 0x00006000/64
[ 2493.454] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 2493.454] (II) LoadModule: "extmod"
[ 2493.454] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 2493.454] (II) Module extmod: vendor="X.Org Foundation"
[ 2493.454] compiled for 1.12.3, module version = 1.0.0
[ 2493.454] Module class: X.Org Server Extension
[ 2493.454] ABI class: X.Org Server Extension, version 6.0
[ 2493.454] (II) Loading extension MIT-SCREEN-SAVER
[ 2493.454] (II) Loading extension XFree86-VidModeExtension
[ 2493.454] (II) Loading extension XFree86-DGA
[ 2493.454] (II) Loading extension DPMS
[ 2493.454] (II) Loading extension XVideo
[ 2493.454] (II) Loading extension XVideo-MotionCompensation
[ 2493.455] (II) Loading extension X-Resource
[ 2493.455] (II) LoadModule: "dbe"
[ 2493.455] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 2493.455] (II) Module dbe: vendor="X.Org Foundation"
[ 2493.455] compiled for 1.12.3, module version = 1.0.0
[ 2493.455] Module class: X.Org Server Extension
[ 2493.455] ABI class: X.Org Server Extension, version 6.0
[ 2493.455] (II) Loading extension DOUBLE-BUFFER
[ 2493.455] (II) LoadModule: "glx"
[ 2493.455] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 2493.455] (II) Module glx: vendor="X.Org Foundation"
[ 2493.455] compiled for 1.12.3, module version = 1.0.0
[ 2493.455] ABI class: X.Org Server Extension, version 6.0
[ 2493.455] (==) AIGLX enabled
[ 2493.455] (II) Loading extension GLX
[ 2493.455] (II) LoadModule: "record"
[ 2493.456] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 2493.456] (II) Module record: vendor="X.Org Foundation"
[ 2493.456] compiled for 1.12.3, module version = 1.13.0
[ 2493.456] Module class: X.Org Server Extension
[ 2493.456] ABI class: X.Org Server Extension, version 6.0
[ 2493.456] (II) Loading extension RECORD
[ 2493.456] (II) LoadModule: "dri"
[ 2493.456] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 2493.456] (II) Module dri: vendor="X.Org Foundation"
[ 2493.456] compiled for 1.12.3, module version = 1.0.0
[ 2493.456] ABI class: X.Org Server Extension, version 6.0
[ 2493.456] (II) Loading extension XFree86-DRI
[ 2493.456] (II) LoadModule: "dri2"
[ 2493.456] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 2493.456] (II) Module dri2: vendor="X.Org Foundation"
[ 2493.456] compiled for 1.12.3, module version = 1.2.0
[ 2493.456] ABI class: X.Org Server Extension, version 6.0
[ 2493.456] (II) Loading extension DRI2
[ 2493.456] (II) LoadModule: "intel"
[ 2493.456] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 2493.456] (II) Module intel: vendor="X.Org Foundation"
[ 2493.456] compiled for 1.12.3, module version = 2.20.1
[ 2493.456] Module class: X.Org Video Driver
[ 2493.456] ABI class: X.Org Video Driver, version 12.0
[ 2493.456] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server,
Ivybridge Server (GT2)
[ 2493.457] (++) using VT number 8
[ 2493.463] drmOpenDevice: node name is /dev/dri/card0
[ 2493.463] drmOpenDevice: open result is 8, (OK)
[ 2493.463] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
[ 2493.463] drmOpenDevice: node name is /dev/dri/card0
[ 2493.463] drmOpenDevice: open result is 8, (OK)
[ 2493.463] drmOpenByBusid: drmOpenMinor returns 8
[ 2493.463] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
[ 2493.463] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 2493.463] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 2493.463] (==) intel(0): RGB weight 888
[ 2493.463] (==) intel(0): Default visual is TrueColor
[ 2493.463] (**) intel(0): Option "AccelMethod" "sna"
[ 2493.463] (II) intel(0): Integrated Graphics Chipset: Intel(R) Sandybridge Mobile (GT2)
[ 2493.463] (--) intel(0): Chipset: "Sandybridge Mobile (GT2)"
[ 2493.464] (**) intel(0): Framebuffer tiled
[ 2493.464] (**) intel(0): Pixmaps tiled
[ 2493.464] (**) intel(0): 3D buffers tiled
[ 2493.464] (**) intel(0): Throttling enabled
[ 2493.464] (**) intel(0): Delayed flush enabled
[ 2493.464] (**) intel(0): "Tear free" disabled
[ 2493.464] (**) intel(0): Forcing per-crtc-pixmaps? no
[ 2493.464] (II) intel(0): Output LVDS1 has no monitor section
[ 2493.465] (II) intel(0): found backlight control interface intel_backlight (type 'raw')
[ 2493.465] (II) intel(0): Output VGA1 has no monitor section
[ 2493.466] (II) intel(0): Output HDMI1 has no monitor section
[ 2493.506] (II) intel(0): Output DP1 has no monitor section
[ 2493.506] (II) intel(0): EDID for output LVDS1
[ 2493.506] (II) intel(0): Manufacturer: AUO Model: 139e Serial#: 0
[ 2493.506] (II) intel(0): Year: 2009 Week: 1
[ 2493.506] (II) intel(0): EDID Version: 1.3
[ 2493.506] (II) intel(0): Digital Display Input
[ 2493.506] (II) intel(0): Max Image Size [cm]: horiz.: 38 vert.: 21
[ 2493.506] (II) intel(0): Gamma: 2.20
[ 2493.506] (II) intel(0): No DPMS capabilities specified
[ 2493.506] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 2493.506] (II) intel(0): First detailed timing is preferred mode
[ 2493.506] (II) intel(0): redX: 0.620 redY: 0.340 greenX: 0.325 greenY: 0.570
[ 2493.506] (II) intel(0): blueX: 0.150 blueY: 0.060 whiteX: 0.313 whiteY: 0.329
[ 2493.506] (II) intel(0): Manufacturer's mask: 0
[ 2493.506] (II) intel(0): Supported detailed timing:
[ 2493.506] (II) intel(0): clock: 107.8 MHz Image Size: 382 x 214 mm
[ 2493.506] (II) intel(0): h_active: 1600 h_sync: 1648 h_sync_end 1680 h_blank_end 1966 h_border: 0
[ 2493.506] (II) intel(0): v_active: 900 v_sync: 903 v_sync_end 909 v_blanking: 912 v_border: 0
[ 2493.506] (II) intel(0): Unknown vendor-specific block f
[ 2493.506] (II) intel(0): AUO
[ 2493.506] (II) intel(0): B173RW01 V3
[ 2493.506] (II) intel(0): EDID (in hex):
[ 2493.506] (II) intel(0): 00ffffffffffff0006af9e1300000000
[ 2493.506] (II) intel(0): 01130103802615780ac4959e57539226
[ 2493.506] (II) intel(0): 0f505400000001010101010101010101
[ 2493.506] (II) intel(0): 0101010101011c2a406e61840c303020
[ 2493.506] (II) intel(0): 36007ed6100000180000000f00000000
[ 2493.506] (II) intel(0): 00000000000000000020000000fe0041
[ 2493.506] (II) intel(0): 554f0a202020202020202020000000fe
[ 2493.506] (II) intel(0): 004231373352573031205633200a0024
[ 2493.506] (II) intel(0): EDID vendor "AUO", prod id 5022
[ 2493.506] (II) intel(0): Printing DDC gathered Modelines:
[ 2493.506] (II) intel(0): Modeline "1600x900"x0.0 107.80 1600 1648 1680 1966 900 903 909 912 -hsync -vsync (54.8 kHz eP)
[ 2493.507] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[ 2493.507] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 2493.507] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 2493.507] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
[ 2493.507] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
[ 2493.507] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
[ 2493.507] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[ 2493.507] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
[ 2493.507] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
[ 2493.507] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
[ 2493.507] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
[ 2493.507] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
[ 2493.507] (II) intel(0): Printing probed modes for output LVDS1
[ 2493.507] (II) intel(0): Modeline "1600x900"x60.1 107.80 1600 1648 1680 1966 900 903 909 912 -hsync -vsync (54.8 kHz eP)
[ 2493.507] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz d)
[ 2493.507] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz d)
[ 2493.507] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz d)
[ 2493.507] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz d)
[ 2493.507] (II) intel(0): EDID for output VGA1
[ 2493.507] (II) intel(0): EDID for output HDMI1
[ 2493.549] (II) intel(0): EDID for output DP1
[ 2493.550] (II) intel(0): Output LVDS1 connected
[ 2493.550] (II) intel(0): Output VGA1 disconnected
[ 2493.550] (II) intel(0): Output HDMI1 disconnected
[ 2493.550] (II) intel(0): Output DP1 disconnected
[ 2493.550] (II) intel(0): Using exact sizes for initial modes
[ 2493.550] (II) intel(0): Output LVDS1 using initial mode 1600x900
[ 2493.550] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 2493.550] (**) intel(0): Display dimensions: (380, 210) mm
[ 2493.550] (**) intel(0): DPI set to (106, 108)
[ 2493.550] (II) Loading sub module "dri2"
[ 2493.550] (II) LoadModule: "dri2"
[ 2493.550] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 2493.550] (II) Module dri2: vendor="X.Org Foundation"
[ 2493.550] compiled for 1.12.3, module version = 1.2.0
[ 2493.550] ABI class: X.Org Server Extension, version 6.0
[ 2493.550] (==) Depth 24 pixmap format is 32 bpp
[ 2493.551] (II) intel(0): SNA initialized with SandyBridge backend
[ 2493.551] (==) intel(0): Backing store disabled
[ 2493.551] (==) intel(0): Silken mouse enabled
[ 2493.551] (II) intel(0): HW Cursor enabled
[ 2493.551] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 2493.551] (==) intel(0): DPMS enabled
[ 2493.551] (II) intel(0): [DRI2] Setup complete
[ 2493.551] (II) intel(0): [DRI2] DRI driver: i965
[ 2493.552] (II) intel(0): direct rendering: DRI2 Enabled
[ 2493.552] (==) intel(0): hotplug detection: "enabled"
[ 2493.552] (--) RandR disabled
[ 2493.552] (II) Initializing built-in extension Generic Event Extension
[ 2493.552] (II) Initializing built-in extension SHAPE
[ 2493.552] (II) Initializing built-in extension MIT-SHM
[ 2493.552] (II) Initializing built-in extension XInputExtension
[ 2493.552] (II) Initializing built-in extension XTEST
[ 2493.552] (II) Initializing built-in extension BIG-REQUESTS
[ 2493.552] (II) Initializing built-in extension SYNC
[ 2493.552] (II) Initializing built-in extension XKEYBOARD
[ 2493.552] (II) Initializing built-in extension XC-MISC
[ 2493.552] (II) Initializing built-in extension SECURITY
[ 2493.552] (II) Initializing built-in extension XINERAMA
[ 2493.552] (II) Initializing built-in extension XFIXES
[ 2493.552] (II) Initializing built-in extension RENDER
[ 2493.552] (II) Initializing built-in extension RANDR
[ 2493.552] (II) Initializing built-in extension COMPOSITE
[ 2493.552] (II) Initializing built-in extension DAMAGE
[ 2493.560] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 2493.560] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 2493.560] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 2493.560] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 2493.560] (II) AIGLX: Loaded and initialized i965
[ 2493.560] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 2493.561] (II) intel(0): switch to mode 1600x900 on crtc 3 (pipe 0)
[ 2493.620] (II) intel(0): Setting screen physical size to 423 x 238
[ 2493.658] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 2493.658] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 2493.658] (II) LoadModule: "evdev"
[ 2493.658] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 2493.659] (II) Module evdev: vendor="X.Org Foundation"
[ 2493.659] compiled for 1.12.3, module version = 2.7.1
[ 2493.659] Module class: X.Org XInput Driver
[ 2493.659] ABI class: X.Org XInput driver, version 16.0
[ 2493.659] (II) Using input driver 'evdev' for 'Power Button'
[ 2493.659] (**) Power Button: always reports core events
[ 2493.659] (**) evdev: Power Button: Device: "/dev/input/event3"
[ 2493.659] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 2493.659] (--) evdev: Power Button: Found keys
[ 2493.659] (II) evdev: Power Button: Configuring as keyboard
[ 2493.659] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[ 2493.659] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 2493.659] (**) Option "xkb_rules" "evdev"
[ 2493.659] (**) Option "xkb_model" "evdev"
[ 2493.659] (**) Option "xkb_layout" "us"
[ 2493.684] (II) config/udev: Adding input device Video Bus (/dev/input/event5)
[ 2493.684] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 2493.684] (II) Using input driver 'evdev' for 'Video Bus'
[ 2493.684] (**) Video Bus: always reports core events
[ 2493.684] (**) evdev: Video Bus: Device: "/dev/input/event5"
[ 2493.684] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 2493.684] (--) evdev: Video Bus: Found keys
[ 2493.684] (II) evdev: Video Bus: Configuring as keyboard
[ 2493.684] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input5/event5"
[ 2493.684] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 2493.685] (**) Option "xkb_rules" "evdev"
[ 2493.685] (**) Option "xkb_model" "evdev"
[ 2493.685] (**) Option "xkb_layout" "us"
[ 2493.686] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
[ 2493.686] (II) No input driver specified, ignoring this device.
[ 2493.686] (II) This device may have been added with another device file.
[ 2493.686] (II) config/udev: Adding input device Video Bus (/dev/input/event4)
[ 2493.686] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 2493.686] (II) Using input driver 'evdev' for 'Video Bus'
[ 2493.686] (**) Video Bus: always reports core events
[ 2493.686] (**) evdev: Video Bus: Device: "/dev/input/event4"
[ 2493.686] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 2493.686] (--) evdev: Video Bus: Found keys
[ 2493.686] (II) evdev: Video Bus: Configuring as keyboard
[ 2493.686] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:2d/LNXVIDEO:00/input/input4/event4"
[ 2493.686] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8)
[ 2493.686] (**) Option "xkb_rules" "evdev"
[ 2493.686] (**) Option "xkb_model" "evdev"
[ 2493.686] (**) Option "xkb_layout" "us"
[ 2493.686] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 2493.686] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 2493.687] (II) Using input driver 'evdev' for 'Power Button'
[ 2493.687] (**) Power Button: always reports core events
[ 2493.687] (**) evdev: Power Button: Device: "/dev/input/event2"
[ 2493.687] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 2493.687] (--) evdev: Power Button: Found keys
[ 2493.687] (II) evdev: Power Button: Configuring as keyboard
[ 2493.687] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2/event2"
[ 2493.687] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 9)
[ 2493.687] (**) Option "xkb_rules" "evdev"
[ 2493.687] (**) Option "xkb_model" "evdev"
[ 2493.687] (**) Option "xkb_layout" "us"
[ 2493.687] (II) config/udev: Adding input device HP TrueVision HD (/dev/input/event8)
[ 2493.687] (**) HP TrueVision HD: Applying InputClass "evdev keyboard catchall"
[ 2493.687] (II) Using input driver 'evdev' for 'HP TrueVision HD'
[ 2493.687] (**) HP TrueVision HD: always reports core events
[ 2493.687] (**) evdev: HP TrueVision HD: Device: "/dev/input/event8"
[ 2493.687] (--) evdev: HP TrueVision HD: Vendor 0x5986 Product 0x2ac
[ 2493.687] (--) evdev: HP TrueVision HD: Found keys
[ 2493.687] (II) evdev: HP TrueVision HD: Configuring as keyboard
[ 2493.687] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input8/event8"
[ 2493.687] (II) XINPUT: Adding extended input device "HP TrueVision HD" (type: KEYBOARD, id 10)
[ 2493.687] (**) Option "xkb_rules" "evdev"
[ 2493.687] (**) Option "xkb_model" "evdev"
[ 2493.687] (**) Option "xkb_layout" "us"
[ 2493.687] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event10)
[ 2493.687] (II) No input driver specified, ignoring this device.
[ 2493.687] (II) This device may have been added with another device file.
[ 2493.687] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event11)
[ 2493.687] (II) No input driver specified, ignoring this device.
[ 2493.687] (II) This device may have been added with another device file.
[ 2493.687] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event12)
[ 2493.688] (II) No input driver specified, ignoring this device.
[ 2493.688] (II) This device may have been added with another device file.
[ 2493.688] (II) config/udev: Adding input device HDA Intel PCH Front Headphone (/dev/input/event13)
[ 2493.688] (II) No input driver specified, ignoring this device.
[ 2493.688] (II) This device may have been added with another device file.
[ 2493.688] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 2493.688] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 2493.688] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 2493.688] (**) AT Translated Set 2 keyboard: always reports core events
[ 2493.688] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 2493.688] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 2493.688] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 2493.688] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 2493.688] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 2493.688] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 11)
[ 2493.688] (**) Option "xkb_rules" "evdev"
[ 2493.688] (**) Option "xkb_model" "evdev"
[ 2493.688] (**) Option "xkb_layout" "us"
[ 2493.688] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event9)
[ 2493.688] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[ 2493.688] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[ 2493.688] (II) LoadModule: "synaptics"
[ 2493.688] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 2493.688] (II) Module synaptics: vendor="X.Org Foundation"
[ 2493.688] compiled for 1.12.2, module version = 1.6.2
[ 2493.688] Module class: X.Org XInput Driver
[ 2493.688] ABI class: X.Org XInput driver, version 16.0
[ 2493.688] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[ 2493.688] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 2493.688] (**) Option "Device" "/dev/input/event9"
[ 2493.689] (II) synaptics: SynPS/2 Synaptics TouchPad: ignoring touch events for semi-multitouch device
[ 2493.689] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5756
[ 2493.689] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4868
[ 2493.689] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[ 2493.689] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[ 2493.689] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right double triple
[ 2493.689] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[ 2493.689] (**) Option "FastTaps" "1"
[ 2493.689] (**) Option "EmulateMidButtonTime" "0"
[ 2493.689] (**) Option "TapButton1" "1"
[ 2493.689] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 2493.689] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 2493.689] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input9/event9"
[ 2493.689] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 12)
[ 2493.690] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[ 2493.690] (**) synaptics: SynPS/2 Synaptics TouchPad: MaxSpeed is now 1.75
[ 2493.690] (**) synaptics: SynPS/2 Synaptics TouchPad: AccelFactor is now 0.036
[ 2493.690] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[ 2493.690] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[ 2493.690] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[ 2493.690] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[ 2493.690] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 2493.691] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[ 2493.691] (II) No input driver specified, ignoring this device.
[ 2493.691] (II) This device may have been added with another device file.
[ 2493.691] (II) config/udev: Adding input device ST LIS3LV02DL Accelerometer (/dev/input/event14)
[ 2493.691] (II) No input driver specified, ignoring this device.
[ 2493.691] (II) This device may have been added with another device file.
[ 2493.692] (II) config/udev: Adding input device ST LIS3LV02DL Accelerometer (/dev/input/js0)
[ 2493.692] (II) No input driver specified, ignoring this device.
[ 2493.692] (II) This device may have been added with another device file.
[ 2493.692] (II) config/udev: Adding input device PC Speaker (/dev/input/event6)
[ 2493.692] (II) No input driver specified, ignoring this device.
[ 2493.692] (II) This device may have been added with another device file.
[ 2493.693] (II) config/udev: Adding input device HP WMI hotkeys (/dev/input/event7)
[ 2493.693] (**) HP WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[ 2493.693] (II) Using input driver 'evdev' for 'HP WMI hotkeys'
[ 2493.693] (**) HP WMI hotkeys: always reports core events
[ 2493.693] (**) evdev: HP WMI hotkeys: Device: "/dev/input/event7"
[ 2493.693] (--) evdev: HP WMI hotkeys: Vendor 0 Product 0
[ 2493.694] (--) evdev: HP WMI hotkeys: Found keys
[ 2493.694] (II) evdev: HP WMI hotkeys: Configuring as keyboard
[ 2493.694] (**) Option "config_info" "udev:/sys/devices/virtual/input/input7/event7"
[ 2493.694] (II) XINPUT: Adding extended input device "HP WMI hotkeys" (type: KEYBOARD, id 13)
[ 2493.694] (**) Option "xkb_rules" "evdev"
[ 2493.694] (**) Option "xkb_model" "evdev"
[ 2493.694] (**) Option "xkb_layout" "us"
[ 2500.586] (II) intel(0): EDID vendor "AUO", prod id 5022
[ 2500.586] (II) intel(0): Printing DDC gathered Modelines:
[ 2500.587] (II) intel(0): Modeline "1600x900"x0.0 107.80 1600 1648 1680 1966 900 903 909 912 -hsync -vsync (54.8 kHz eP)
[ 2502.163] (II) intel(0): EDID vendor "AUO", prod id 5022
[ 2502.163] (II) intel(0): Printing DDC gathered Modelines:
[ 2502.163] (II) intel(0): Modeline "1600x900"x0.0 107.80 1600 1648 1680 1966 900 903 909 912 -hsync -vsync (54.8 kHz eP)
[ 2502.206] (II) intel(0): EDID vendor "AUO", prod id 5022
[ 2502.206] (II) intel(0): Printing DDC gathered Modelines:
[ 2502.206] (II) intel(0): Modeline "1600x900"x0.0 107.80 1600 1648 1680 1966 900 903 909 912 -hsync -vsync (54.8 kHz eP)
Please inform me of any more info you would need.
This is pretty confusing, any help highly appreciated, thanks!

I have found a workaround in this bug report.
Make a script in /usr/lib/systemd/system-sleep/keyboard.sh
#!/bin/sh
case $1/$2 in
post/*)
echo -n rescan > /sys/devices/platform/i8042/serio1/drvctl
esac
Do not forget to make it executable:
chmod a+x /usr/lib/systemd/system-sleep/keyboard.sh

Keyboard-mouse locked after resume from suspend

After the last couple of system updates my system no longer resumes properly from suspend. The video is fine but the keyboard-mouse combo is locked up.
The kb-mouse combo is a logitech wireless:
Bus 001 Device 002: ID 046d:c517 Logitech, Inc. LX710 Cordless Desktop Laser
I can see no relevant log details in systemctl that lead me anywhere. Any ideas appreciated.

I don't know if this is the same bug. I'm using openbox and a desktop computer without any touchpad. After being suspended, my mouse somehow rules all of my desktop - whole screen is flattering, and moving mouse changes the size of the visible, flashing window. Moving cursor to the top of the screen "locks" the window, and everything except mouse cursor is perfectly normal. Cursor is waving and flashing bunch of pixels, from the right side of the screen to the current location of the mouse cursor. I can use the mouse, and cursor is in right location. Ctrl+Alt+F2 visiting to tty2 and coming back fixes the situation, so I can use computer just fine, but it's still quite uncomfortable. Sounds quite strange, I think?

[SOLVED]No sound after resuming from suspend thinkpad t23

On a T23 Thinkpad, suspend-to-ram works, but I have no sound and no network when resuming.
After googling for a while, it seems I must unload sound modules before going to sleep and then reload my sound modules after resuming.
lsmod|grep snd gives me this:
snd_intel8x0 28700 3
snd_ac97_codec 94756 1 snd_intel8x0
snd_pcm_oss 38432 0
snd_pcm 68996 3 snd_intel8x0,snd_ac97_codec,snd_pcm_oss
snd_timer 19332 1 snd_pcm
snd_page_alloc 8072 2 snd_intel8x0,snd_pcm
snd_mixer_oss 14464 1 snd_pcm_oss
snd 44388 12 snd_intel8x0,snd_ac97_codec,snd_pcm_oss,snd_pcm,snd_timer,snd_mixer_oss
soundcore 6496 1 snd
ac97_bus 2432 1 snd_ac97_codec
However, from the command line, after
modprobe -r snd_seq_oss snd_seq snd_seq_device snd_intel8x0 snd_ac97_codec snd_pcm_oss snd_pcm snd_timer snd_mixer_oss
I get:
FATAL: Module snd_intel8x0 is in use.
Even though I have no sound apps running.
I am planning on putting the modprobe -r command in /etc/pm/sleep.d/whatever to unload and then another to reload the mods.
Any help appreciated.
Last edited by Misfit138 (2008-01-07 02:27:07)

OK, solved it. Placed this in /etc/pm/sleep.d/11suspend
#!/bin/sh
mixers="Master PCM CD"
for mixer in $mixers ; do
/usr/bin/amixer -q sset $mixer mute
/usr/bin/amixer -q sset $mixer unmute
done
Just mutes and unmutes master, PCM and cd channels. Works perfectly. suspend-to-ram and hibernate now work 100%.
Thinkpads are so sweet.

Network has weird problem after Resume from suspend...

hi guys,
I have a ThinkPad T60 laptop with archlinux at home. and I have a router with wlan supported for the internet. Suspend/Resuming (pm-utils) works. Recently after resuming, the network-manager says WLAN connected with ESSID, but internet connection was lost. it is weird:
I can really connect the WLAN, e.g. I can ping another computer's IP and exchange files with it,
I can see my wlan by iwlist,
but I cannot reach the IP address of the router by Ping.
I tried restarting network-manager, switching off and on the wireless adapter neither worked. the only way I found to bring the network back is restarting the router.
I list the stuff that I thought would be helpful here, hope someone can give some hints.
thanks in advance.
kent$ uname -a
Linux ArchT60 3.0-ARCH #1 SMP PREEMPT Wed Aug 17 20:24:07 UTC 2011 i686 Intel(R) Core(TM)2 CPU T5600 @ 1.83GHz GenuineIntel GNU/Linux
part of my rc.conf:
MODULES=(acpi-cpufreq cpufreq_ondemand iwl3945 fuse radeon vboxdrv !floppy !pcspkr)
INTERFACES=(!eth0 !wlan0)
# Routes to start at boot-up (in this order)
# Declare each route then list in ROUTES
# - prefix an entry in ROUTES with a ! to disable it
gateway="default gw 192.168.0.254"
ROUTES=(gateway)
DAEMONS=(syslog-ng !network @acpid @alsa netfs @crond hal @cups !dbus networkmanager @sshd tpfand gdm)
the last suspend/resuming log (/var/log/pm-suspend.log)
There errors when it was waked up. one with alsa, the other two about hal and tpfand. I thought that it has nothing to do with network.
And I didn't install netcfg. So the netcfg11 hook does actually nothing.
Running hook /usr/lib/pm-utils/sleep.d/00logging suspend suspend:
... uname, lsmod and free output are omitted ...
/usr/lib/pm-utils/sleep.d/00logging suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/00powersave suspend suspend:
/usr/lib/pm-utils/sleep.d/00powersave suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/01grub suspend suspend:
/usr/lib/pm-utils/sleep.d/01grub suspend suspend: success.
Running hook /etc/pm/sleep.d/09tpfand suspend suspend:
:: Stopping ThinkPad fan control daemon [BUSY] [DONE]
/etc/pm/sleep.d/09tpfand suspend suspend: success.
Running hook /etc/pm/sleep.d/10hal suspend suspend:
:: Stopping Hardware Abstraction Layer [BUSY] [DONE]
/etc/pm/sleep.d/10hal suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/11netcfg suspend suspend:
/usr/lib/pm-utils/sleep.d/11netcfg suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/49bluetooth suspend suspend:
/usr/lib/pm-utils/sleep.d/49bluetooth suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/75modules suspend suspend:
/usr/lib/pm-utils/sleep.d/75modules suspend suspend: success.
Running hook /etc/pm/sleep.d/90alsa suspend suspend:
/etc/pm/sleep.d/90alsa suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/90clock suspend suspend:
/usr/lib/pm-utils/sleep.d/90clock suspend suspend: success.
Running hook /etc/pm/sleep.d/91alsa suspend suspend:
/etc/pm/sleep.d/91alsa suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/94cpufreq suspend suspend:
/usr/lib/pm-utils/sleep.d/94cpufreq suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/95led suspend suspend:
/usr/lib/pm-utils/sleep.d/95led suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/98video-quirk-db-handler suspend suspend:
Kernel modesetting video driver detected, not using quirks.
/usr/lib/pm-utils/sleep.d/98video-quirk-db-handler suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/99video suspend suspend:
kernel.acpi_video_flags = 0
/usr/lib/pm-utils/sleep.d/99video suspend suspend: success.
Thu Aug 25 01:39:30 CEST 2011: performing suspend
Thu Aug 25 21:11:44 CEST 2011: Awake.
Thu Aug 25 21:11:44 CEST 2011: Running hooks for resume
Running hook /usr/lib/pm-utils/sleep.d/99video resume suspend:
/usr/lib/pm-utils/sleep.d/99video resume suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/98video-quirk-db-handler resume suspend:
/usr/lib/pm-utils/sleep.d/98video-quirk-db-handler resume suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/95led resume suspend:
/usr/lib/pm-utils/sleep.d/95led resume suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/94cpufreq resume suspend:
/usr/lib/pm-utils/sleep.d/94cpufreq resume suspend: success.
Running hook /etc/pm/sleep.d/91alsa resume suspend:
ALSA lib pulse.c:229:(pulse_connect) PulseAudio: Unable to connect: Connection refused
aplay: main:660: audio open error: Connection refused
/etc/pm/sleep.d/91alsa resume suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/90clock resume suspend:
/usr/lib/pm-utils/sleep.d/90clock resume suspend: success.
Running hook /etc/pm/sleep.d/90alsa resume suspend:
ALSA lib pulse.c:229:(pulse_connect) PulseAudio: Unable to connect: Connection refused
aplay: main:660: audio open error: Connection refused
/etc/pm/sleep.d/90alsa resume suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/75modules resume suspend:
Reloaded unloaded modules.
/usr/lib/pm-utils/sleep.d/75modules resume suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/49bluetooth resume suspend:
/usr/lib/pm-utils/sleep.d/49bluetooth resume suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/11netcfg resume suspend:
/usr/lib/pm-utils/sleep.d/11netcfg resume suspend: success.
Running hook /etc/pm/sleep.d/10hal resume suspend:
A daemon is starting another daemon, this is unlikely to work as intended.\n
:: Starting Hardware Abstraction Layer [BUSY] [DONE]
/etc/pm/sleep.d/10hal resume suspend: success.
Running hook /etc/pm/sleep.d/09tpfand resume suspend:
A daemon is starting another daemon, this is unlikely to work as intended.\n
:: Starting ThinkPad fan control daemon [BUSY] [DONE]
/etc/pm/sleep.d/09tpfand resume suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/01grub resume suspend:
/usr/lib/pm-utils/sleep.d/01grub resume suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/00powersave resume suspend:
/usr/lib/pm-utils/sleep.d/00powersave resume suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/00logging resume suspend:
/usr/lib/pm-utils/sleep.d/00logging resume suspend: success.
Thu Aug 25 21:11:46 CEST 2011: Finished.
Last edited by sk1418 (2011-08-26 20:08:39)

after it waked up, I did tried ifconfig down/up wlan0, didn't work.
I will try to bring down the wlan0 before suspend tomorrow.
some new test from yesterday
Router IP: 192.168.0.254
DNS:192.168.0.254
another PC: 192.168.0.1
one of Google IP:74.125.39.104
after waked up
ping 192.168.0.254 , failed.
ping 192.168.0.1 OK
ping 74.125.39.104 OK
ping www.google.com Failed
I changed the DNS to google DNS:8.8.8.8, then I can access website in browser, also ping www.google.com OK.
I even REBOOTed my laptop, I still cannot reach my router by ping 192.168.0.254.... accessing internet is ok...
if I restart router, everything is fine...
what is the problem!!! weird!
Last edited by sk1418 (2011-08-30 22:59:31)

System freeze after resume from suspend

Similar Messages

Maybe you are looking for