System Log(SM21), how I can achieve this?
How I can display the fields that were changed during the debug mode through System Log. What are the Function Modules to read the system log.
Look at these Function Groups :
SLO2 System log: Read and analyze
SLO3 System log: Table caches
SLO4 System log: Parameter buffer
SLO5 System log: Errno analysis
Regards
Similar Messages
-
Suggest an IDEA how we can achieve this
Hi Folks
I have the below requirement:
Can you please anyone give me the idea how we can achieve this.
Requirement is:
Some body in the organization (Representative ) will raise the salesorder .
When the sales order is created and when the creator pressed the save button,an email with that order details has to be send to that Representative.
This Representative will have the supervisor and based on the Representative using some ztable we have to fetch the Supervisor ID and based on that id we have to get the supervisor's mail id and the same mail has to be sent to that Supervisor also.
Similarly one big boss is there for all these process.
The mail with the similar content has to sent to that big Boss also.
All these has to be carried out when the creator of the sales order press the Save Button.
Points are assured for useful and correct answers.
Regards,
SreeramHi Sreeram,
I would try to archive this by using the workflow. The workflow should start when the sales order is saved. The event "salesorder create" you can used for starting the workflow. The Workflow functionality is good documeted by the SAP standard documetation.
Best regards
Dirk -
Hi,
May i know how to write my application messages into system log(sm21)
using "c_write_syslog_entry". Any explanation regarding the Type. ID, Data
will be useful with examples. Incase of any other FM's or C functions does
the same Please let me know.
Thanks
PrasathHello Prasanth
I agree with Kareem that you should prefer the application log. If interface IF_RECA_MESSAGE_LIST is available on your SAP system this is the first choice for collecting messages AND storing them as application log.
For an example you may have a look at my Wiki posting [Message Handling - Finding the Needle in the Haystack|https://wiki.sdn.sap.com/wiki/display/profile/2007/07/09/MessageHandling-FindingtheNeedleintheHaystack]
Not shown in this example is the storage of the application log. However, if you look at method CF_RECA_MESSAGE_LIST=>CREATE you see that you can add the application log references here.
Regards
Uwe -
I had a ringtone on a iphone 4 that i purchased and can't find it or recover it. How do I achieve this?
If you don't have it in the Tones section of your computer's iTunes library, nor on your backup of your downloads, then if it is still in the store then you will need to try contacting iTunes Support and see if they will grant you a re-download : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page
-
I changed my apple ID but when I open iCloud it still has my old ID and I can't log in, how do I fix this?
Hello scottyme1,
In order to sign out of your iCloud account that had a ID change, you would need to change the account back to the original. The reason for that is probably due to the Find my device feature and it needs to verify and if that iCloud account does not exist because of the name change and you cannot sign out. Changing it back is pretty easy and should not ask you to verify but once you change it and sign out, you can change it back to what you want it to be. Take a look at the article below to walk you through this.
If you're asked for the password to your previous Apple ID when signing out of iCloud
https://support.apple.com/en-us/HT203828
Regards,
-Norm G. -
Job that must be programmed to collect information for system log (sm21)
Please, Who is the job that must be programmed to collect information for system log (sm21) ?
Thank you very much.
Hugo.Before you reinitialize your log shipping configuration, check to see if you can take a differential backup and restore that on top of your standby database. This is relatively easier than to take a full database backup just to reinitialize
Edwin Sarmiento SQL Server MVP | Microsoft Certified Master
Blog |
Twitter | LinkedIn
SQL Server High Availability and Disaster Recover Deep Dive Course
I can take a diff backup.. But in my secondary, when i right click standby >tasks-->restore-->i can see only option to restore transaction log file. Other options are greyed out. How can i restore a diff backup now. If i bring the DB online with
restore with recovery, i have to restore a full backup before i can apply a diff backup.
Somebody provide me insight on below error
This secondary database is not functional because
the required copy or restore job cannot be found. You must remove this secondary database by clicking Remove. To resume log shipping to this secondary database, add it as a secondary again using the same settings.If
you resume log shipping and you specify the same restore path that you used before, any backup files that are uncopied or unrestored to this database will be copied and restored when it is added as a secondary again. Reinitializing the secondary database
is unnecessary."
I can see the LS_restore job and the job is running as per the schedule, we dont run copy job because
the backup directly falls in secondary server. wats the reason for the above error. -
Writing to system log(sm21)
Hi All,
I have a requirement to write custom generated log to system log(sm21), Is there any FM for the same or how to do the same.
thanks
bobbyYou cannot use the system log for your own purpose.
Actually, you can, using the kernel functions available, shown in the SLOG package programs. The system log is nothing more than a local file that gets written to and then synchronized across app servers. But you are correct that the poster needs to use the application logs, as I also stated. -
== Issue
==
I have another kind of problem with Firefox
== Description
==
When i tried to install DownloadHelper this happened Firefox could not install the file at
https://addons.mozilla.org/en-US/firefox/downloads/latest/3006/addon-3006-latest.xpi?src=addondetail
because: Unexpected installation error
Review the Error Console log for more details.
-203
, how do i check the log and how do i resolve this problem? thank you
== This happened
==
Just once or twice
== today
==
== Troubleshooting information
==
Application Basics
Name
Firefox
Version
3.6.3
Profile Directory
Open Containing Folder
Installed Plugins
about:plugins
Build Configuration
about:buildconfig
Extensions
Name
Version
Enabled
ID
Ask Toolbar for Firefox
2.1.0.5
true
AVG Safe Search
9.0.0.783
true
{3f963a5b-e555-4543-90e2-c3908898db71}
Java Console
6.0.17
true
Microsoft .NET Framework Assistant
1.1
true
{20a82645-c095-46ed-80e3-08825760534b}
BitDefender Antiphishing Toolbar
2.0
true
[email protected]
Modified Preferences
Name
Value
accessibility.typeaheadfind.flashBar
0
browser.places.smartBookmarksVersion
2
browser.startup.homepage_override.mstone
rv:1.9.2.3
extensions.lastAppVersion
3.6.3
general.useragent.extra.microsoftdotnet
(.NET CLR 3.5.30729)
network.cookie.prefsMigrated
true
places.last_vacuum
1276351876
print.print_printer
HP Photosmart D5300 series
print.printer_HP_Photosmart_D5300_series.print_bgcolor
false
print.printer_HP_Photosmart_D5300_series.print_bgimages
false
print.printer_HP_Photosmart_D5300_series.print_command
print.printer_HP_Photosmart_D5300_series.print_downloadfonts
false
print.printer_HP_Photosmart_D5300_series.print_edge_bottom
0
print.printer_HP_Photosmart_D5300_series.print_edge_left
0
print.printer_HP_Photosmart_D5300_series.print_edge_right
0
print.printer_HP_Photosmart_D5300_series.print_edge_top
0
print.printer_HP_Photosmart_D5300_series.print_evenpages
true
print.printer_HP_Photosmart_D5300_series.print_footercenter
print.printer_HP_Photosmart_D5300_series.print_footerleft
&PT
print.printer_HP_Photosmart_D5300_series.print_footerright
&D
print.printer_HP_Photosmart_D5300_series.print_headercenter
print.printer_HP_Photosmart_D5300_series.print_headerleft
&T
print.printer_HP_Photosmart_D5300_series.print_headerright
&U
print.printer_HP_Photosmart_D5300_series.print_in_color
true
print.printer_HP_Photosmart_D5300_series.print_margin_bottom
0.5
print.printer_HP_Photosmart_D5300_series.print_margin_left
0.5
print.printer_HP_Photosmart_D5300_series.print_margin_right
0.5
print.printer_HP_Photosmart_D5300_series.print_margin_top
0.5
print.printer_HP_Photosmart_D5300_series.print_oddpages
true
print.printer_HP_Photosmart_D5300_series.print_orientation
0
print.printer_HP_Photosmart_D5300_series.print_pagedelay
500
print.printer_HP_Photosmart_D5300_series.print_paper_data
9
print.printer_HP_Photosmart_D5300_series.print_paper_height
11.00
print.printer_HP_Photosmart_D5300_series.print_paper_size_type
0
print.printer_HP_Photosmart_D5300_series.print_paper_size_unit
1
print.printer_HP_Photosmart_D5300_series.print_paper_width
8.50
print.printer_HP_Photosmart_D5300_series.print_reversed
false
print.printer_HP_Photosmart_D5300_series.print_scaling
1.00
print.printer_HP_Photosmart_D5300_series.print_shrink_to_fit
true
print.printer_HP_Photosmart_D5300_series.print_to_file
false
print.printer_HP_Photosmart_D5300_series.print_unwriteable_margin_bottom
0
print.printer_HP_Photosmart_D5300_series.print_unwriteable_margin_left
0
print.printer_HP_Photosmart_D5300_series.print_unwriteable_margin_right
0
print.printer_HP_Photosmart_D5300_series.print_unwriteable_margin_top
0
privacy.sanitize.migrateFx3Prefs
true
security.warn_viewing_mixed
false
== Firefox version
==
3.6.3
== Operating system
==
Windows Vista
== User Agent
==
Mozilla/5.0 (Windows; U; Windows NT 6.0; en-GB; rv:1.9.2.3) Gecko/20100401 Firefox/3.6.3 (.NET CLR 3.5.30729)
== Plugins installed
==
*-npdivxplayerplugin
*Default Plug-in
*Adobe PDF Plug-In For Firefox and Netscape "9.3.2"
*The QuickTime Plugin allows you to view a wide variety of multimedia content in Web pages. For more information, visit the QuickTime Web site.
*NPRuntime Script Plug-in Library for Java(TM) Deploy
*6.0.12.732
*RealPlayer(tm) LiveConnect-Enabled Plug-In
*RealJukebox Netscape Plugin
*Shockwave Flash 10.0 r45
*Adobe Shockwave for Director Netscape plug-in, version 11.5
*iTunes Detector Plug-in
*DivX Web Player version 2.0.0.254
*GEPlugin
*4.0.50524.0
*Office Live Update v1.4
*NPWLPG
*Windows Presentation Foundation (WPF) plug-in for Mozilla browsers
*RealPlayer(tm) HTML5VideoShim Plug-In
*Google Update
*Next Generation Java Plug-in 1.6.0_20 for Mozilla browsersMark Leary:
As TXGuy posted above:
See:
https://support.mozilla.com/en-US/kb/Unexpected+installation+error+-203+when+installing+add-ons
http://kb.mozillazine.org/Unable_to_install_themes_or_extensions_-_Firefox#Unexpected_installation_error_-203
Also see:
http://support.mozilla.com/en-US/kb/Profiles#How_to_find_your_profile
http://kb.mozillazine.org/Show_hidden_files_and_folders -
I get an error message when trying to sign into the support community with another Apple id. On the <pick a username> screen I get "an account utilizing this address already exists.Only one account per email address is allowed on the Apple Support Communities" despite trying a few usernames. Anyone know how I can resolve this?
This problem has been driving me demented. The instructions that Ivan gives have partially worked for me. By following his link
"How to find out if you have multiple Apple IDs" I was able to identify that yes I did have two apple accounts using the same e mail address. One was very old that I used to use for the forum boards and one is my much more recent ID that I use for everything these days. So I changed the e mail address for the old account which is associated with these discussion boards and that's the account that I am now posting this from. However even though the two accounts now have different e mail addresses when I try to log onto the boards with my more recent main apple ID I still get all the same errors as described at the start of this thread by rodgers_j. And of course that's the one I want to use so that I only have one itunes account for everything.
So if anyone has any more hints I'd be very grateful. -
My iPod touch is not connecting to my iCloud account, under iCloud settings it has my old email account and username that I have since updated and are working correctly on my iPad, any idea how I can reset this on the iPod or otherwise? This old account info keeps coming back on my iPod and messing up access to my apple account and now the icloud. last time a system restore needed to be done to fix it....
It won't give me the option to sign out of the old account, it's that light grey color that you can't click on. And since it has the old email address that it's telling me to go into to verify the account, I can't actually change it... I'm stuck
-
Your apple id has been disabled . how i can solve this problem
your apple id has been disabled . how i can solve this problem
Depending on why it's been disabled, you might be able to re-enable it via this page : http://appleid.apple.com, then 'reset your password'
Or you might need to contact Apple : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page
If it then works on your computer's iTunes but not your device then try logging out of your account on the device by tapping on the id in Settings > Store (Settings > iTunes & App Stores on iOS 6) and then log back in and see if that 'refreshes' the account on it -
When i want to download an app in app store give me an error number and i could not down load.how i can solve this error number?
Hi Amir.09395340646,
Welcome to the Support Communities!
What app are you trying to download? Is it iPhoto for iOS? What error message are you receiving? The first thing I would suggest is to log out of your iTunes Store account on your iPhone. Then restart the device and log in again.
iOS: Changing the signed-in iTunes Store Apple ID account
http://support.apple.com/kb/HT1311?viewlocale=en_US
If the above did not resolve your issue, follow the troubleshooting steps in the article below.
The link includes the complete details and screenshots, but I've highlighted a few points for you:
Can't connect to the iTunes Store
http://support.apple.com/kb/TS1368
- Make sure that your iOS software is up to date by connecting your iOS device to iTunes and clicking on Check for Update in your device's Summary page in iTunes.
- Check and verify that you are in range of a Wi-Fi router or base station. If you are on a 3G capable device, make sure that cellular data is turned on from Settings > General > Cellular.
- Check to make sure you have an active internet connection. You can check the User Guide for your device for help with connecting to the internet.
- Check to make sure other devices (portable computers, for example) are able to connect to the Wi-Fi network and access the internet.
- Try resetting (turning off and then on again) your Wi-Fi router
- If the issue still persists see, iOS: Troubleshooting Wi-Fi networks and connections or iOS: Troubleshooting Wi-Fi networks and connections.
I hope this information helps ....
- Judy -
Does anyone know how I can solve this. My cat managed to move iphoto tab to the middle of the screen and now I cannot open it and get this message.
You cannot open the application iphoto because it may be damaged or incomplete
Any help appreciatedYou need a more technically saavy cat, for a start.
To re-install iPhoto
1. Put the iPhoto.app in the trash (Drag it from your Applications Folder to the trash)
2a: On 10.5: Go to HD/Library/Receipts and remove any pkg file there with iPhoto in the name.
2b: On 10.6: Those receipts may be found as follows: In the Finder use the Go menu and select Go To Folder. In the resulting window type
/var/db/receipts/
2c: on 10.7 or later they're at
/private/var/db/receipts
A Finder Window will open at that location and you can remove the iPhoto pkg files.
3. Re-install.
If you purchased an iLife Disk, then iPhoto is on it.
If iPhoto was installed on your Mac when you go it then it’s on the System Restore disks that came with your Mac. Insert the first one and opt to ‘Install Bundled Applications Only.
If you purchased it on the App Store or have a Recent Mac you can find it in your Purchases List. -
How I can fix this error message in the Windows Server - "kCGErrorFailure: No workspace dictionary"? This occurs after every startup or restart.
You probably don't need the hard drive and optical drive specs, but here they are?
======================
Intel ICH10 AHCI:
Vendor: Intel
Product: ICH10 AHCI
Link Speed: 3 Gigabit
Negotiated Link Speed: 1.5 Gigabit
Description: AHCI Version 1.20 Supported
HL-DT-ST DVD-RW GH41N:
Model: HL-DT-ST DVD-RW GH41N
Revision: PQ06
Serial Number: K3D9BH92251
Native Command Queuing: No
Detachable Drive: No
Power Off: No
Async Notification: Yes
Bay Name: Upper
HL-DT-ST DVD-RW GH41N:
Model: HL-DT-ST DVD-RW GH41N
Revision: PQ06
Serial Number: K3D9BH92251
Native Command Queuing: No
Detachable Drive: No
Power Off: No
Async Notification: Yes
Bay Name: Upper
Intel ICH10 AHCI:
Vendor: Intel
Product: ICH10 AHCI
Link Speed: 3 Gigabit
Description: AHCI Version 1.20 Supported
Intel ICH10 AHCI:
Vendor: Intel
Product: ICH10 AHCI
Link Speed: 3 Gigabit
Negotiated Link Speed: 3 Gigabit
Description: AHCI Version 1.20 Supported
Hitachi HDP725050GLA360:
Capacity: 500.11 GB (500,107,862,016 bytes)
Model: Hitachi HDP725050GLA360
Revision: GM4OA5CA
Serial Number: GEA534RJ06E63A
Native Command Queuing: Yes
Queue Depth: 32
Removable Media: No
Detachable Drive: No
BSD Name: disk1
Rotational Rate: 7200
Medium Type: Rotational
Bay Name: Bay 1
Partition Map Type: GPT (GUID Partition Table)
S.M.A.R.T. status: Verified
Volumes:
disk1s1:
Capacity: 209.7 MB (209,715,200 bytes)
BSD Name: disk1s1
Content: EFI
OSXLION:
Capacity: 499.25 GB (499,248,103,424 bytes)
Available: 192.76 GB (192,758,513,664 bytes)
Writable: Yes
File System: Journaled HFS+
BSD Name: disk1s2
Mount Point: /
Content: Apple_HFS
Recovery HD:
Capacity: 650 MB (650,002,432 bytes)
BSD Name: disk1s3
Content: Apple_Boot
Hitachi HDP725050GLA360:
Capacity: 500.11 GB (500,107,862,016 bytes)
Model: Hitachi HDP725050GLA360
Revision: GM4OA5CA
Serial Number: GEA534RJ06E63A
Native Command Queuing: Yes
Queue Depth: 32
Removable Media: No
Detachable Drive: No
BSD Name: disk1
Rotational Rate: 7200
Medium Type: Rotational
Bay Name: Bay 1
Partition Map Type: GPT (GUID Partition Table)
S.M.A.R.T. status: Verified
Volumes:
disk1s1:
Capacity: 209.7 MB (209,715,200 bytes)
BSD Name: disk1s1
Content: EFI
OSXLION:
Capacity: 499.25 GB (499,248,103,424 bytes)
Available: 192.76 GB (192,758,513,664 bytes)
Writable: Yes
File System: Journaled HFS+
BSD Name: disk1s2
Mount Point: /
Content: Apple_HFS
Recovery HD:
Capacity: 650 MB (650,002,432 bytes)
BSD Name: disk1s3
Content: Apple_Boot
Intel ICH10 AHCI:
Vendor: Intel
Product: ICH10 AHCI
Link Speed: 3 Gigabit
Negotiated Link Speed: 3 Gigabit
Description: AHCI Version 1.20 Supported
WDC WD2002FYPS-02W3B0:
Capacity: 2 TB (2,000,398,934,016 bytes)
Model: WDC WD2002FYPS-02W3B0
Revision: 04.01G01
Serial Number: WD-WCAVY7048785
Native Command Queuing: Yes
Queue Depth: 32
Removable Media: No
Detachable Drive: No
BSD Name: disk3
Rotational Rate: 5400
Medium Type: Rotational
Bay Name: Bay 2
Partition Map Type: GPT (GUID Partition Table)
S.M.A.R.T. status: Verified
Volumes:
disk3s1:
Capacity: 209.7 MB (209,715,200 bytes)
BSD Name: disk3s1
Content: EFI
BU2TB-Time:
Capacity: 2 TB (2,000,054,960,128 bytes)
Available: 1.1 TB (1,096,926,654,464 bytes)
Writable: Yes
File System: Journaled HFS+
BSD Name: disk3s2
Mount Point: /Volumes/BU2TB-Time
Content: Apple_HFS
WDC WD2002FYPS-02W3B0:
Capacity: 2 TB (2,000,398,934,016 bytes)
Model: WDC WD2002FYPS-02W3B0
Revision: 04.01G01
Serial Number: WD-WCAVY7048785
Native Command Queuing: Yes
Queue Depth: 32
Removable Media: No
Detachable Drive: No
BSD Name: disk3
Rotational Rate: 5400
Medium Type: Rotational
Bay Name: Bay 2
Partition Map Type: GPT (GUID Partition Table)
S.M.A.R.T. status: Verified
Volumes:
disk3s1:
Capacity: 209.7 MB (209,715,200 bytes)
BSD Name: disk3s1
Content: EFI
BU2TB-Time:
Capacity: 2 TB (2,000,054,960,128 bytes)
Available: 1.1 TB (1,096,926,654,464 bytes)
Writable: Yes
File System: Journaled HFS+
BSD Name: disk3s2
Mount Point: /Volumes/BU2TB-Time
Content: Apple_HFS
Intel ICH10 AHCI:
Vendor: Intel
Product: ICH10 AHCI
Link Speed: 3 Gigabit
Negotiated Link Speed: 3 Gigabit
Description: AHCI Version 1.20 Supported
WDC WD10EAVS-00D7B1:
Capacity: 1 TB (1,000,204,886,016 bytes)
Model: WDC WD10EAVS-00D7B1
Revision: 01.01A01
Serial Number: WD-WCAU43604330
Native Command Queuing: Yes
Queue Depth: 32
Removable Media: No
Detachable Drive: No
BSD Name: disk0
Medium Type: Rotational
Bay Name: Bay 3
Partition Map Type: GPT (GUID Partition Table)
S.M.A.R.T. status: Verified
Volumes:
disk0s1:
Capacity: 209.7 MB (209,715,200 bytes)
BSD Name: disk0s1
Content: EFI
Data:
Capacity: 999.86 GB (999,860,912,128 bytes)
Available: 715.55 GB (715,549,786,112 bytes)
Writable: Yes
File System: Journaled HFS+
BSD Name: disk0s2
Mount Point: /Volumes/Data
Content: Apple_HFS
WDC WD10EAVS-00D7B1:
Capacity: 1 TB (1,000,204,886,016 bytes)
Model: WDC WD10EAVS-00D7B1
Revision: 01.01A01
Serial Number: WD-WCAU43604330
Native Command Queuing: Yes
Queue Depth: 32
Removable Media: No
Detachable Drive: No
BSD Name: disk0
Medium Type: Rotational
Bay Name: Bay 3
Partition Map Type: GPT (GUID Partition Table)
S.M.A.R.T. status: Verified
Volumes:
disk0s1:
Capacity: 209.7 MB (209,715,200 bytes)
BSD Name: disk0s1
Content: EFI
Data:
Capacity: 999.86 GB (999,860,912,128 bytes)
Available: 715.55 GB (715,549,786,112 bytes)
Writable: Yes
File System: Journaled HFS+
BSD Name: disk0s2
Mount Point: /Volumes/Data
Content: Apple_HFS
Intel ICH10 AHCI:
Vendor: Intel
Product: ICH10 AHCI
Link Speed: 3 Gigabit
Negotiated Link Speed: 3 Gigabit
Description: AHCI Version 1.20 Supported
WDC WD1003FBYX-01Y7B0:
Capacity: 1 TB (1,000,204,886,016 bytes)
Model: WDC WD1003FBYX-01Y7B0
Revision: 01.01V01
Serial Number: WD-WCAW31850957
Native Command Queuing: Yes
Queue Depth: 32
Removable Media: No
Detachable Drive: No
BSD Name: disk2
Rotational Rate: 7200
Medium Type: Rotational
Bay Name: Bay 4
Partition Map Type: GPT (GUID Partition Table)
S.M.A.R.T. status: Verified
Volumes:
disk2s1:
Capacity: 209.7 MB (209,715,200 bytes)
BSD Name: disk2s1
Content: EFI
BUOSXLION:
Capacity: 999.86 GB (999,860,912,128 bytes)
Available: 697.88 GB (697,881,690,112 bytes)
Writable: Yes
File System: Journaled HFS+
BSD Name: disk2s2
Mount Point: /Volumes/BUOSXLION
Content: Apple_HFS
WDC WD1003FBYX-01Y7B0:
Capacity: 1 TB (1,000,204,886,016 bytes)
Model: WDC WD1003FBYX-01Y7B0
Revision: 01.01V01
Serial Number: WD-WCAW31850957
Native Command Queuing: Yes
Queue Depth: 32
Removable Media: No
Detachable Drive: No
BSD Name: disk2
Rotational Rate: 7200
Medium Type: Rotational
Bay Name: Bay 4
Partition Map Type: GPT (GUID Partition Table)
S.M.A.R.T. status: Verified
Volumes:
disk2s1:
Capacity: 209.7 MB (209,715,200 bytes)
BSD Name: disk2s1
Content: EFI
BUOSXLION:
Capacity: 999.86 GB (999,860,912,128 bytes)
Available: 697.88 GB (697,881,690,112 bytes)
Writable: Yes
File System: Journaled HFS+
BSD Name: disk2s2
Mount Point: /Volumes/BUOSXLION
Content: Apple_HFS -
When i push the off button, i want my iphone 5 to stay unlocked for 3 or 4 minutes: how do I achieve this please?
When you say you want it to stay unlocked, do you mean that you don't want to have to swipe to unlock it if you push the home button in that time, or do you mean you don't want to have to ender your passcode if you turn it back on within that time?
If you're referring to the passcode lock, Settings>General>Passcode Lock>Requie Passcode. Set the interval you want.
If you can't change the time before it request the passcode, that's likely because you have an Exchange account set up on the phone and the administrator is enforcing a policy that requires passcode entry immediatly after placing the phone in standby.
Maybe you are looking for
-
Impossible to delete applications on Mac OS X
I'm having frustrating issues with trying to delete applications from my MacBook. First of all, where is the Applications folder suppose to be stored on the Mac? I find my apps folder located in "My Computer" along with Systems, Library and Users. Wh
-
Sorting folders within a catalogue by date
I have imported my Aperture and iPhoto albums into Lightroom. In my new Lightroom catalogue, they are separated by year taken. Within a given year, however the folders are now sorted alphabetically by folder name, instead of by date (they were organi
-
Skype Error "Could not open Key: HKEY_LOCAL_M...
I get this error.What can i do?
-
Can we go back to previous operating system? We really don't like iOS 7.0.3
Really don't like the new iOS 7.0.3 and it's messed up numerous of our settings. Would really like to go back to the previous.
-
How do I keep my screen from shutting off
I have a droid RAZR M and I downloaded a knitting pattern on to my phone and I am using my phone instead of a paper pattern. The only problem is that my screen shuts off so frequently, and then the text is so small that is unreadable. I have to stop