System monitoring software

What is the beast/most accurate system monitoring software. As musch as I love my MOBO the monitoring software it was bundled with is less then par.
I have tried nMonitor from nVidia, Speedfan, and PC wizard.
nMonitor only monitors 3 temps.
In Speedfan, I can't tell which temps are for which components. I put the CPU under load to trya nd figure it out and what I came up with does not look right.
PC Wizard ver 1.65 seems to have a CPU temp bug. It says my CPU is over 200 degrees C! (Obviously that is not correct.)
What is a good one to use???
Thanks in advance.
CK

Many people here use Speedfan intead of Core Center. Corecenter may give more accurate readings (some whacky voltages though) but it does not work for fan and cool and quiet regulation, and some say it can cause bios corruption and stay away from it completely or never run it continuously. I stopped using corecenter when I heard it is not a good way to overclock and I use speed fan to do the things that corecenter should do. Speedfan is not slick, but I am finding it useful to regulate fan speeds (and sound) automatically. It's voltages are off, but temperatures and fan speeds seem reasonably close to reality. On my board the cpu temperature and cpu fan are both #2 and nb is fan #1 and temp #3. There are some pretty good configuration options deeper in the menus. Lately, with some bios, starting speedfan when windows starts is not recommended. I am able to start with windows in the bios below so far. Have been using it a few weeks.
everest and all the rest give wierd voltages and i don't trust any software's voltages. bios voltage readings are supposed to be the most correct, but I have seem many that are way off consistently.
Good luck.

Similar Messages

Monitoring/Alerting Set up options in SM - System Monitoring

Comrades
When configuring Solution monitoring in SM 4.0 for our lanscape the customised CCMS monitor set (created in RZ20 of Target Sysem) needs to be imported during set-up system monitoring process
1.Is it possible to import the customised CCMS context in solution monitoring during set up?
2.In the current system monitoring configuration certain DB related monitors are not visible (displayed) though they are configured properly is something to be done ?
Also looking on the following alerting options E-mail,SMS and SNMP Traps from the SM 4.0.My understanding is E-mail and SMS are based on Central autoreaction methods on the Alert Monitor.
3.Is it possible to configure E-mail and SMS without CCMS Agents on Target Systems ? and Is there a way of configuring E-mail and SMS other than Central Auto Reaction Methods ?
4.Are there any prerequistes (Agents, Software, packages ) for configuring SNMP Traps from SM ?
I have done some reading and searching on these points and pretty unclear on these aspects.Kindly share your knowledge on this area.
Kindly Respond
Many a Thanks
Gnana

I managed to set up an account manually on the C7 but I had to trick the email application by entering an invalid email address and password. After it could not find my account it then opened up all the settings and permitted me to add the manual IMAP settings, reply to address and other details. After I committed the settings, the phone recognised the account as a gmail account and it locked down all the settings again so I could not go back and change them if wrong.
I was quite chuffed with myself for seemingly resolving all my issues.....but on using the new account settings I could not sync the gmail sent / bin folders. All the other folders synchronised fine and when I send email it has the correct reply to address. Strangely this matches the best results I obtained when connecting using the Mail for Exchange settings so am no further forward. I am a little confused by this as when I let the phone set up the Gmail account on it's own it can sync everything.....but I just can't
I am now hoping that the new software update (PR1.2) gets email working a little better....well when I eventually get it hehe.

Solution Manager System Monitoring of a CE 7.10

Hi
I am trying to setup a Solution Manager Monitoring Solution for a CE 7.10 Enviroment.
I have already setup CEN in SOLMAN.
I have registered CE Systems with a sapccmsr j2ee agent.
I have setup the JCO RFC Connection in CE.
I have created the TCP/IP Connection to the JCO Connection in Solman.
I have set the TCP/IP Connection in RZ21 as the J2EE Customizing Destination.
The solution involves only 1 Logical Component with 3 CE Systems.
When I go to the solution manager setup and try to configure the MTE Nodes for my solution I cannot get the MTE context while clicking in Activate Monitoring for other Software Components
I choose Java Application Server, choose my server, choose CEn but when i have to choose the context of the MTE i get an empty list.
IF i go Activate Monitoring for Other Servers and choose the server I get the contexts of the remote server, but I can only choose one.
So how can I see the context of the CE servers in the Software component part?
Ty.

Hi,
Have you defined and added corresponding logical systems for the respective satellite systems?
Here is the sequence of steps you've to do:
in SMSY:
1) Define server, DB, Systems
2) Generate READ, TMW, TRUSTED RFCs to the satellite systems
3) define logical systems and assign the satellite system to it
in Solution_Manager:
1) define new solution
2) add the logical system into the solution
If these steps are successful, you should be able to see the satellite system in SYSTEM MONITORING in Solution_Manager.
Have you already done these steps?
After performing these steps:
Solution_Manager>choose relevant solution>operations setup>Solution Monitoring>System monitoring>Activate monitoring> choose the system and activate monitoring.
Your system will then appear.
Does this help any way?

My mac become so slow i can't use any app. All the time there is sound of hard drive but no swapping is reported by system monitor.

Hi Folks,
recently my Mac after latest upgrade of Maverics 10.9.2 degraded performance dramatically to the point that when I switch from one app to another i should wait 30-40 seconds to get the response back from the System. The Hard drive is in use each time I click a mouse button. Sounds like an excessive hard drive usage usually caused by swapping. But System monitor shows Free memory ) Swapping and plenty of Idle CPU.
I tried to find the Process that might over uses the disk but all appear to be Ok. i couldn't spot any process that would over use the IO.
IO looks normal from System Monitor.
I checked the Apple Support whenever it is a defected hard disk issue but according to serial this Mac is not under disk replacement program.
Any tips on what should I do to find the root cause?
Mac specifications:
27-inch Mid 2010
MEMORY 4GB 1333 MHZ DDR3
Software OS X 10.9.2 (13C64)
ATI Radeon HD 5750 1024 MB graphics
Intel 5 Series Chipset:
Vendor:          Intel
Product:          5 Series Chipset
Link Speed:          3 Gigabit
Negotiated Link Speed:          3 Gigabit
Physical Interconnect:          SATA
Description:          AHCI Version 1.30 Supported
ST31000528AS:
Capacity:          1 TB (1,000,204,886,016 bytes)
Model:          ST31000528AS
Revision:          AP25
Serial Number:                      9VP87BKN
Native Command Queuing:          Yes
Queue Depth:          32
Removable Media:          No
Detachable Drive:          No
BSD Name:          disk0
Rotational Rate:          7200
Medium Type:          Rotational
Partition Map Type:          GPT (GUID Partition Table)
S.M.A.R.T. status:          Verified
Thanks in advance
Emile

I have plenty of disk space 350 GB free.
I don't run excessive number of apps as you can see in top I have plenty of free Physical RAm plenty of idle CPU and IO is Ok too Swap is not in use means there is no lack of any resources
Even I f I quit all applications and use just safari the problem exists.
Processes: 174 total, 2 running, 6 stuck, 166 sleeping, 813 threads                                                11:35:05
Load Avg: 0.79, 0.78, 0.46 CPU usage: 0.47% user, 1.42% sys, 98.10% idle
SharedLibs: 134M resident, 0B data, 21M linkedit. MemRegions: 23450 total, 1500M resident, 121M private, 411M shared.
PhysMem: 3342M used (539M wired), 747M unused. VM: 418G vsize, 1310M framework vsize, 0(0) swapins, 0(0) swapouts.
Networks: packets: 25114/24M in, 16805/2740K out. Disks: 67293/2231M read, 15086/343M written.
I don't run any MAc keeper like apps nor antiviruses . I don't trust them. I f I need to clean something I will do it myself
Happens in switch between all apps even between the tabs in safari
The only symptom I have so far is noisy hard disk
each time i switch apps or windows I hear hard disk doing something.
Makes me think it might be hard disk problem but fsck doesn't show any issue
no bad secktors etc.
According to all diagnostics everything is Ok
That's kind of worries me not to be able to find the bottleneck having more than 20 years experience with UNIX

Setup Central System Administratin and Setup System Monitoring grayed out

When trying to setup Central Sytem Administration and System Monitoring via SOLUTION_MANAGER.>Operations Setup->Solution Monitoring->Setup Central System Administration (or Setup System Monitoring). The link does not work. However, Setup Earlywatch Alert link works (in Operations Setup->Solution Monitoring->Setup Earlywatch Alert).
We have just brought SolMan 4.0 up to SolMan 7.0 (applied support packs up to 16). I am not sure if I am missing a step to activate this functionality; or if perhaps I have an authorization issue. I have been through the Security Guid for SAP Solution Manager 7.0 as of SP16, and have reviewed note 834534 and been assigned authorizations accordingly....with one exception: In note 834534, page 4, it states that the configuration user should have SAP_ALL. However, I am getting push-back from IT Governance and my request for SAP_ALL is being rejected.
We have installed software components, in particular ST (Release 400, level 17); ST-SER (700_2008_1, Level 004; and ST-PI (2005_1_700 Level 18); of which I believe ST-SER is key.
Has anyone encountered this issue?

Hi,
Yes, This could be an authorization issue.
You are able to Setup Early Watch Alert because you may have the role
SAP_SETUP_DSWP_EWA (full authorization for EarlyWatch Alert setup).
Assign these roles, you wil be able to setup System Monitoring and Administration.
1. SAP_SV_SOLUTION_MANAGER (full authorization for all sessions)
2. SAP_SETUP_DSWP (full authorization for all setup sessions)
3. SAP_SETUP_DSWP_SM (full authorization for System Monitoring setup)
4. SAP_SETUP_DSWP_CSA (full authorization for Central System Administration setup)
5. SAP_SETUP_DSWP_SLR (full authorization for Service Level Report setup)
Also check these roles:
SAP_OP_DSWP (full authorization for all Operations sessions)
SAP_OP_DSWP_EWA (full authorization for EarlyWatch Alert operations)
SAP_OP_DSWP_SM (full authorization for System Monitoring Operations)
SAP_OP_DSWP_CSA (full authorization for Central System Administration operations)
SAP_OP_DSWP_SLR (full authorization for Service Level Report Operations)
This is the authorization object D_SOL_VIEW used in these roles.
Regards,
Sanjai

What is the best system maintenance software to use for a MBP??

Hello everyone, I was formerly using Mac Tune-up for my Macbook Pro and it did an okay job but I am not sure what Mac software I should be using to keep my system clean while keeping it running at optimal performance. Turns-out I can no longer use Mac Tune-Up since I upgraded to Mavericks from Snow Leopard. Can anyone recommend to me the best system maintenance software to use for my MBP with Mavericks OS and where I can get it (a link or site URL)? Thanks in advance!

How to maintain a Mac
1. Make two or more backups of all your files, keeping at least one off site at all times in case of disaster. One backup is not enough to be safe. Don’t back up your backups; all should be made directly from the original data. Don’t rely completely on any single backup method, such as Time Machine. If you get an indication that a backup has failed, don't ignore it.
2. Keep your software up to date. In the App Store or Software Update preference pane (depending on the OS version), you can configure automatic notifications of updates to OS X and other Mac App Store products. Some third-party applications from other sources have a similar feature, if you don’t mind letting them phone home. Otherwise you have to check yourself on a regular basis.
Keeping up to date is especially important for complex software that modifies the operating system, such as device drivers. Before installing any Apple update, you must check that all such modifications that you use are compatible. Incompatibility with third-party software is by far the most common cause of trouble with system updates.
3. Don't install crapware, such as “themes,” "haxies," “add-ons,” “toolbars,” “enhancers," “optimizers,” “accelerators,” "boosters," “extenders,” “cleaners,” "doctors," "tune-ups," “defragmenters,” “firewalls,” "barriers," “guardians,” “defenders,” “protectors,” most “plugins,” commercial "virus scanners,” "disk tools," or "utilities." With very few exceptions, such stuff is useless or worse than useless. Above all, avoid any software that purports to change the look and feel of the user interface.
It's not much of an exaggeration to say that the whole "utility" software industry for the Mac is a fraud on consumers. The most extreme examples are the "CleanMyMac" and “MacKeeper” scams, but there are many others.
As a rule, the only software you should install is that which directly enables you to do the things you use a computer for, and doesn't change the way other software works.
Safari extensions, and perhaps the equivalent for other web browsers, are a partial exception to the above rule. Most are safe, and they're easy to get rid of if they don't work. Some may cause the browser to crash or otherwise malfunction. Some are malicious. Use with caution, and install only well-known extensions from relatively trustworthy sources, such as the Safari Extensions Gallery.
Never install any third-party software unless you know how to uninstall it. Otherwise you may create problems that are very hard to solve. Do not rely on "utilities" such as "AppCleaner" and the like that purport to remove software.
4. Don't install bad, conflicting, or unnecessary fonts. Whenever you install new fonts, use the validation feature of the built-in Font Book application to make sure the fonts aren't defective and don't conflict with each other or with others that you already have. See the built-in help and this support article for instructions. Deactivate or remove fonts that you don't really need to speed up application launching.
5. Avoid malware. Malware is malicious software that circulates on the Internet. This kind of attack on OS X was once so rare that it was hardly a concern, but malware is now increasingly common, and increasingly dangerous.
There is some built-in protection against downloading malware, but you can’t rely on it—the attackers are always at least one day ahead of the defense. You can’t rely on third-party protection either. What you can rely on is common-sense awareness—not paranoia, which only makes you more vulnerable.
Never install software from an untrustworthy or unknown source. If in doubt, do some research. Any website that prompts you to install a “codec” or “plugin” that comes from the same site, or an unknown site, is untrustworthy. Software with a corporate brand, such as Adobe Flash Player, must come directly from the developer's website. No intermediary is acceptable, and don’t trust links unless you know how to parse them. Any file that is automatically downloaded from the web, without your having requested it, should go straight into the Trash. A web page that tells you that your computer has a “virus,” or that anything else is wrong with it, is a scam.
In OS X 10.7.5 or later, downloaded applications and Installer packages that have not been digitally signed by a developer registered with Apple are blocked from loading by default. The block can be overridden, but think carefully before you do so.
Because of recurring security issues in Java, it’s best to disable it in your web browsers, if it’s installed. Few websites have Java content nowadays, so you won’t be missing much. This action is mandatory if you’re running any version of OS X older than 10.6.8 with the latest Java update. Note: Java has nothing to do with JavaScript, despite the similar names. Don't install Java unless you're sure you need it. Most people don't.
6. Don't fill up your disk/SSD. A common mistake is adding more and more large files to your home folder until you start to get warnings that you're out of space, which may be followed in short order by a startup failure. This is more prone to happen on the newer Macs that come with an internal SSD instead of the traditional hard drive. The drive can be very nearly full before you become aware of the problem.
While it's not true that you should or must keep any particular percentage of space free, you should monitor your storage use and make sure you're not in immediate danger of using it up. According to Apple documentation, you need at least 9 GB of free space on the startup volume for normal operation.
If storage space is running low, use a tool such as OmniDiskSweeper to explore the volume and find out what's taking up the most space. Move seldom-used large files to secondary storage.
7. Relax, don’t do it. Besides the above, no routine maintenance is necessary or beneficial for the vast majority of users; specifically not “cleaning caches,” “zapping the PRAM,” "resetting the SMC," “rebuilding the directory,” "defragmenting the drive," “running periodic scripts,” “dumping logs,” "deleting temp files," “scanning for viruses,” "purging memory," "checking for bad blocks," "testing the hardware," or “repairing permissions.” Such measures are either completely pointless or are useful only for solving problems, not for prevention.
To use a Mac effectively, you have to free yourself from the Windows mindset that every computer needs regular downtime maintenance such as "defragging" and "registry cleaning." Those concepts do not apply to the Mac platform. A well-made computing device is not something you should have to think about much. It should be an almost transparent medium through which you communicate, work, and play. If you want a machine that needs a lot of attention, use a PC.
The very height of futility is running an expensive third-party application called “Disk Warrior” when nothing is wrong, or even when something is wrong and you have backups, which you must have. Disk Warrior is a data-salvage tool, not a maintenance tool, and you will never need it if your backups are adequate. Don’t waste money on it or anything like it.

System Monitoring Graphics- Page not opening..

We are trying to setup the System monitoring setup between Solman and ECC, All the config part done using simulator software.
Now when I click DSWP - operations - System Monitoring receive an error message page cannot be displayed..
But when I open the link from windows server its working fine.
Couls somone reply how to fix it ?.
Thanks
Thirumal

Hi Nelis,
I cleared the Cache and temporary internet files, and rebooted the sap and windows server too.
still shows the same error like page cannot be displayed.
MY SAP Solman system Installation number is SAP-INTERN and ECC installation number is "Initial" with licensed one till december 2008.
1.in this is it a problem with installation number ?..
2. Is their Any one configured the System monitoring with installaton number INITIAL or SAP-INTERN ?
Thanks
Thirumal.

Children's monitoring software for a MacBook

I have recentlhy purchased my 12 year old a MacBook and want to install some monitoring software.
Does anyone know of an effective home use monitoring software, ideally with emailed reports.

There is parental controls that is already built in. System Preferences > Accounts > Select the account > Enable Parental Controls. You can check out the options and see if that suites you.
Here's a review of a couple of them. I have a cousin who had cyber patrol on his PC and I went over and it was a pain, but I can't say anything about the Mac version because I've never tried it and because things differ between operating systems. If you want more info about parental control programs search on google.
Chris

Overclock : cpu monitor software isnt corresponting with overclock speeds

I over clocked my q9300 proccessor. I made all the changes in the BIOS
I changed the FSB from 333 to 400.
I also changed my ram from 1333 to 1600.
I can see the changes corolate in the POST however every monitoring software (CPUID) states that my system is running at 333 FSB and cpu is at 2.5
Whats going on?

Quote from: Aaron on 10-January-11, 11:47:15
First of all: overclock one thing at a time. Memory, then CPU or vice versa.
Don't touch the ref voltages for now, that's the last stage.
What are your FSB and CPU multiplier settings in that screenshot? I'm assuming 400 FSB and 7.5x for 3GHz?
YEs it was at 400 FSB and 7.5 x
How can I overclock one thing at a time ... FSB increase effects both CPU and RAM right?
Do you mean changing the ratio?
I changed it to 1:1.5 which yields 1200 mhz which is underclocking my RAM :(
im not yet sure if its stable.. I will report back
Edit: IT seems stable like this

Can the i-CENS monitoring software work on a mac

I have a cctv system monitoring my home and want to know if there is an i-CENS program for the mac

Hello, I have the Curve 8330. I was very excited to put 5.0 on my phone. As soon as a carrier released it for the 8330, I put it on my phone. I loved the new features. I like the bedside mode, the clock now had a stopwatch, using SMS was like using instant messaging and had smiley’s you could send, the media player worked much faster and when watching videos, you could actually scroll by seconds and not minutes. Moving icons around was made easier by more options.
Now all that said, as much as I liked the software, after about 3 months I took it off. Even though RIM has said the software would be for the 8330, I don't believe it has the processing power for it. I was always looking at hour glasses. I tried deleting applications and only having the main programs running in the background, but it still didn't help. Even if you can put up with that, there seemed to be some kind of bug in the software. Something had a big memory leak. I tried to delete different parts of the software to find out what was causing it, but I never found out. I had to reboot my phone several times a day because it would tell me I was out of memory. Once you rebooted it would have plenty of space, but hour after hour, the phone would lose memory.
So there you go, some of the applications on your 4.5 won't work on 5.0 so you have to uninstall ther old version and reinstall the new version. So I hope I have saved you all the time I wasted. My advice would be to get the 9650 when it comes out.

System monitor won't start.

I am having a problem and I am not sure how I caused it or how I can fix it.
when I try to start system monitor I get this following error.
[jacko@kermit ~]$ gnome-system-monitor
gnome-system-monitor: error while loading shared libraries: libsigc-2.0.so.0: wrong ELF class: ELFCLASS32
[jacko@kermit ~]$
what should I do to fix this problem? I am using arch 64, the only things I have installed that are 32 bit is skype and flash I believe.
I don't wanna break my other programs to get system monitor working either...
Last edited by jacko (2007-11-24 22:05:44)

jacko wrote:How does one check the pacman logs?
[dante4d ~]$ tail /var/log/pacman.log
[2007-11-24 05:00] installed spcaview (1.1.7-1)
[2007-11-24 05:00] installed motion (3.2.8-1)
[2007-11-24 05:01] synchronizing package lists
[2007-11-24 05:02] synchronizing package lists
[2007-11-24 05:08] upgraded stk11xx (1.1.0-1 -> 1.1.0-1)
[2007-11-24 06:26] The jdk package is licensed software.
[2007-11-24 06:26] You MUST read and agree to the license stored in
[2007-11-24 06:26] /opt/java/LICENSE before using it.
[2007-11-24 06:26] installed jdk (6u3-1)
[2007-11-24 06:39] installed eclipse-sdk (3.3.1.1-1)

5 tough questions relating to the monitoring software

Hi guys,
I'm writing this on behalf of one of our partners. They are having major problems setting up the monitoring software (v 1.0.0_200809). I have asked them to verify that they are using the latest firmware upgrades on the cameras and that they are running the latest version of the monitoring software. They have confirmed that this is the case.
I have some doubts about this but perhaps you can help with the issues listed below.
The following issues have surfaced:
1. Issues with Graphic Card driver for Intel GMA945
- if this driver is installed in a laptop the monitoring software (1.0.0_200809) will not inititate/start.
The error message is: <or corrupted resource files. Please reinstall to solve this problem.>
Reinstalling the software will unofortunately not solve the problem. The only way to fix this problem is by removing the driver.
Question: Is this the only way to get the monitoring software to work and is this a known issue?
2. The new version of the monitoring software is unable to find the cameras using "search" functionality. The only way to configure tha camera is to do it manually.
Question: Is this a known issue and how should I truobleshoot this?
3. The cameras will not store the video feed on the Cisco NAS servers if the monitoring software is shut down. I remember from previous discussions that this should be possible but my partner is unable to get this fixed.
Question: Are there any instructions for how to set up the cameras so that the video feed is still being stored on the NAS despite closing the monitoring software?
4. In order to setup an ftp -feed to the NAS server, each camera needs to be configured manually. According to the partner this can not be done centrally using the monitoring software.
Question: Is this really the case?
5. According to the partner, it is not possible to use the monitoring software to view stored material that has been transferred using ftp.
Question: Is this really the case?
Many thanks in advance!
Rasmus Almqvist, Cisco Systems Finland

Hello and sorry for my delay in responding (Was on Vacation).
1) I have seen the problem you refer to and the way I got around it was to change the screen resolution, believe it or not. I remember lowering it to 1280x800 and even have it working at 1400x1050.   That is a weird problem, and I did report that to the BU who I believe told NUUO, but for now this is the only workaround. Uninstalling and reinstalling will not help, as you realize now.
2) The new Utility WILL FIND all SB Cameras it supports on the LAN. So if your PC is connected to the LAN and can route (ping) the cameras, it can find them. Note: xVC2300 require FW upgrade to V1.01 to make them work.   WVC200 will not be recognized at all.
WAN Monitoring of course will require manual config and port forwarding to an alternate TCP port (PVC300) or an adjusted TCP port (xVC2300).
3) Correct. If your it off, it wont record.   This is really menat to be on a dedicated PC that should always be running, so is per design, and I do realize the old utility worked as well when off, but this new one is much improved in other areas and is still free :-)
The Camera itself can send montion detection or scheduled recordings to an FTP Server (NSS2xxx, NSS3xxx) regardless of the presence of the SWVMS16, so yes, the camera can do this too (Simultaneous; dual stream; dual codec).
4) Setting up the FTP client on the Camera and the FTP Server on the NSS is done with a WIZARD or manual config on the elements and is totally separate from SWVMS16, which is an additional capability.
5) The SWVMS16 will only save information (video) it records, so is separate fromt he FTP sourced files from the camera. To access the FTP files, just add the NSS to your network neighborhood on the NSS and browse the files (CIFS or NFS) as you would if they were on your own PC.
Steve D
Systems Engineer
Cisco Small Business Sales

System monitoring - DSWP and RZ21

Hi all,
I am using sap solution managers workcenter "System monitoring" to set up the sap monitornig for a huge landscape. This works well, but to receive alerts (e.g. per mail) I additionaly have to do the settings in RZ21 (assign central autoreactions). This is not very comfortable because each setting has to be done twice (in dwsp and rz21) and there is also the risk to forget something. Do you know any other possibility? Do you know about plans to integrate the functions of RZ21 into DSWP?
Thanks
Michael

HI
We are setting up system monitoring is solman? i do have the same doubt as mentioned earlier
>
Karthik Bhirraju wrote:
> Please let me know whats the diffrence in configuring CCMS alerts in RZ21 (CEN- SOL) and configuring CCMS in(CEN- SOL) Solution Manager -> DSWP -> Solution Monitoring ?? is Solman-> Solution Monitoring a shortcu way or a WIZARD way to RZ21 (creating CCMSUSR, CCMSREG .. etc what ever we do in RZ21) or we need to configure RZ21 as prerequisite to configure solution monitorind in DSWP
can anyone guide me here? and what would this affect the RCA setup
jansi

System Monitoring / Administration asking for logon id

Each time I click on, "System Monitoring / Administration" in DSWP, a dialog box pops up asking me for a username and password. I've tried using the local system admin password, SAP*, my own SAP logon id, the J2EE_ADMIN user, etc.. but the dialog box just keeps popping back up. This doesn't happen under any other tab (i.e. Early Watch). If I hit cancel, I get the error below:
Logon failed
What has happened?
Call of URL http://sapsolman.mpfs.maines.net:8000/sap/bc/solman/defaultUser/graphic/solmangraphic.htm terminated due to error in logon data.
Note
Logon performed in system SMS.
Logon performed for client 100 and language EN.
What can I do?
Check the validity of your SSO ticket for this system.
If you do not yet have a user ID, contact your system administrator.
Error Code: ICF-LE-http-c:100-l:E-T:21-C:3-U:54-P:54-L:3
HTTP 401 - Unauthorized
Your SAP Internet Communication Framework Team
Please tell me what I need to do to fix this authorization issue. Thank you.

Hi,
When it pops up for a logon details, please check below to which system is it connecting? Then the communication user which is being used in both the Managed and Managing system will be locked. After unlocking the user in the Managed system the issue will be resolved.
Thanks & Best Regards,
Raghavendra.
Edited by: Raghavendra B Deshpande on Nov 25, 2009 7:10 AM

System monitoring - alert email notification

Hello Sapers,
I already set up system monitoring in our Solution Manager but i would like to receive mail if any alert occur. Unfortunatelly I did not find any way how to do it through Solution Manager. I guess there must be something like edit -> Automatic email transmission where I set up sending Earlywatch and SL reports to my mailbox, but how to set up alert email notification?
I also tried another way - setting up CEN (in our sollution manager) in RZ20, there i created monitor where i have desired alerts from all remote systems configured in SMSY (i have not used sapccm4x or any other ccms agent), also tried autoreaction method on local and it is working fine (SCOT is set up) but when i tried create and assign central autoreaction method (sapnote 429265) during assigning i receive error "no ccms agent avalable for system" and it is not working. Do I really need configure SAPCCM4X on all remote systems when i want to use central autoreaction? I dont feel very confortable with this solution. I think there must be some other smarter way (maybe in solution manager).
We also tried to connect our RZ20 monitor set to nagios (used in our company to monitor non sap servers and email notification), but we are not able to compile the ccms nagios plugin uder 64bit. AIX 5.3.
I also heard little bit about ALM (Alert management) but dont know anything about forwarding alerts from RZ20 to ALM and transmitting email from there. But I think this sollution would be the most difficult from all mentioned above.
Thank you very much for any help

Josef,
Somewhat chasing the point here - when you have the Solman and you look in your CCMS and you can see the other systems - it is all RFC data and not actually on the Solution Manager (the only local MTE's are those tha belong to the Solution Manager). For the Solution Manager to Centrally Auto-React to threasholds (act as the CEN System), the information needs to be passed to the Central System through the agents.
If you want to do email threasholds on your remote systems, you can configure it on each of the systems individually without agents as this is a CCMS Function that any SAP System can do - but this is not Central Auto-Reaction. This is just actions taken on individual systems based on local MTE's.
To Centrally Auto-React - you have to add the agents so the information is passed to the CEN to react on.
I hope that this has clarified the situation a bit more. If this answers your question, please set this thread to answered.

System monitoring software

Similar Messages

Maybe you are looking for