Monitoring/Alerting Set up options in SM - System Monitoring

Comrades
When configuring Solution monitoring in SM 4.0 for our lanscape the customised CCMS monitor set (created in RZ20 of Target Sysem) needs to be imported during set-up system monitoring process
1.Is it possible to import the customised CCMS context in solution monitoring during set up?
2.In the current system monitoring configuration certain DB related monitors are not visible (displayed) though they are configured properly is something to be done ?
Also looking on the following alerting options E-mail,SMS and SNMP Traps from the SM 4.0.My understanding is E-mail and SMS are based on Central autoreaction methods on the Alert Monitor.
3.Is it possible to configure E-mail and SMS without CCMS Agents on Target Systems ? and Is there a way of configuring  E-mail and SMS other than Central Auto Reaction Methods ?
4.Are there any prerequistes (Agents, Software, packages ) for configuring SNMP Traps from SM ?
I have done some reading and searching on these points and pretty unclear on these aspects.Kindly share your knowledge on this area.
Kindly Respond
Many a Thanks
Gnana

I managed to set up an account manually on the C7 but I had to trick the email application by entering an invalid email address and password. After it could not find my account it then opened up all the settings and permitted me to add the manual IMAP settings, reply to address and other details. After I committed the settings, the phone recognised the account as a gmail account and it locked down all the settings again so I could not go back and change them if wrong. 
I was quite chuffed with myself for seemingly resolving all my issues.....but on using the new account settings I could not sync the gmail sent / bin folders. All the other folders synchronised fine and when I send email it has the correct reply to address. Strangely this matches the best results I obtained when connecting using the Mail for Exchange settings so am no further forward. I am a little confused by this as when I let the phone set up the Gmail account on it's own it can sync everything.....but I just can't 
I am now hoping that the new software update (PR1.2) gets email working a little better....well when I eventually get it hehe.

Similar Messages

  • Configure System monitoring in SOLMAN

    Hi
    I need some help on this. For now I have installed solman / windows 2008 / oracle 10g on VM. A test system has been added as a satellite system in solman. CCMS Agent and CCMS PING has been installed in the satellite system. I am able to use my Alert monitor in solman to check out alerts from the satellite system. what do I need to do next to integrate this with solution manager?
    I have reads the document http://help.sap.com/saphelp_sm40/helpdata/EN/0b/160419162a476380b5608e7f27a742/content.htm
    This talks about "Setup system monitoring" and going into change mode. I dont see the change mode or the option to setup system monitoring.
    PS: SMSY is setup correctly, I can see my satellite system from there.
    any ideas on how to proceed will be appreciated.
    thanks
    ravi

    The "Setup system monitoring" option showed up after in went into solutions overview in solution_manager Tcode and clicked on a number (hyperlink) under System monitoring for SAP Solution Manager Reference

  • System Monitoring and CCMS Monitors

    In our production environment we have working CCMS Monitors set up thru RZ20.
    However if I go to solution_manager->system monitoring->operations tab, there are no alerts displayed on the page. Does system monitoring use the same backend as CCMS Monitoring? I am a little bit confused on this. If we set up System Monitoring, will this duplicate the CCMS Monitors we've previously set up?

    If you want to see alerts on Operation tab in solution_manager->Solution Monitoring->System Monitoring you first need to run "Setup System Monitoring" (link is just below tab Operation or run in from Operations Setup tab). Setup will not duplicate CCMS monitors. It will just mark which of the available alerts should be taken into account for solution_manager->Solution Monitoring->System Monitoring report.
    This might help you to start:
    http://help.sap.com/saphelp_smehp1/helpdata/en/5b/0c9ccfd262427685c245d7ea85cd7a/content.htm

  • Setup Central System Administratin and Setup System Monitoring grayed out

    When trying to setup Central Sytem Administration and System Monitoring via SOLUTION_MANAGER.>Operations Setup->Solution Monitoring->Setup Central System Administration (or Setup System Monitoring).  The link does not work.  However, Setup Earlywatch Alert link works (in Operations Setup->Solution Monitoring->Setup Earlywatch Alert).
    We have just brought SolMan 4.0 up to SolMan 7.0 (applied support packs up to 16).  I am not sure if I am missing a step to activate this functionality; or if perhaps I have an authorization issue.  I have been through the Security Guid for SAP Solution Manager 7.0 as of SP16, and have reviewed note 834534 and been assigned authorizations accordingly....with one exception:  In note 834534, page 4, it states that the configuration user should have SAP_ALL.  However, I am getting push-back from IT Governance and my request for SAP_ALL is being rejected. 
    We have installed software components, in particular ST (Release 400, level 17); ST-SER (700_2008_1, Level 004; and ST-PI (2005_1_700 Level 18); of which I believe ST-SER is key.
    Has anyone encountered this issue?

    Hi,
    Yes, This could be an authorization issue.
    You are able to Setup Early Watch Alert because you may have the role
    SAP_SETUP_DSWP_EWA (full authorization for EarlyWatch Alert setup).
    Assign these roles, you wil be able to setup System Monitoring and Administration.
    1. SAP_SV_SOLUTION_MANAGER (full authorization for all sessions)
    2. SAP_SETUP_DSWP (full authorization for all setup sessions)
    3. SAP_SETUP_DSWP_SM (full authorization for System Monitoring setup)
    4. SAP_SETUP_DSWP_CSA (full authorization for Central System Administration setup)
    5. SAP_SETUP_DSWP_SLR (full authorization for Service Level Report setup)
    Also check these roles:
    SAP_OP_DSWP (full authorization for all Operations sessions)
    SAP_OP_DSWP_EWA (full authorization for EarlyWatch Alert operations)
    SAP_OP_DSWP_SM (full authorization for System Monitoring Operations)
    SAP_OP_DSWP_CSA (full authorization for Central System Administration operations)
    SAP_OP_DSWP_SLR (full authorization for Service Level Report Operations)
    This is the authorization object D_SOL_VIEW  used in these roles.
    Regards,
    Sanjai

  • How can i use my smart TV as a second monitor for my Power mac (2010) via HDMI cable? i've made the connection but no options show in system prefs display.

    How can i use my smart TV as a second monitor for my Power mac (2010) via HDMI cable? i've made the connection but no options show in system prefs display.
    the computer:Mac Pro, Mac OS X (10.9.5), 2 x 2.66 Ghz 6-Core intel Xeon
    the TV: LG Smart tv

    The Mac uses a highly-parameterized universal Driver for every display. The parameters are set at certain times when a query is sent to your display. The display MUST answer with its name and capabilities, or the screen stays dark. A TV set that is off or "not paying attention" because it is set to a different port when the query occurs will rarely answer, and so will often remain dark.
    You can use tools in the System Report to see whether your display has been detected at all. If it has, the report will look something like this, but its name will appear:
    The times when the query is sent are:
    • at Startup
    • at wake from sleep
    • when the Mac-end of the cable is inserted
    • when using the Option ( Detect Displays ) button in displays preferences

  • System monitoring - alert email notification

    Hello Sapers,
    I already set up system monitoring in our Solution Manager but i would like to receive mail if any alert occur.  Unfortunatelly I did not find any way how to do it through Solution Manager. I guess there must be something like edit -> Automatic email transmission where I set up sending Earlywatch and SL reports to my mailbox, but how to set up alert email notification?
    I also tried another way - setting up CEN (in our sollution manager) in RZ20, there i created monitor where i have desired alerts from all remote systems configured in SMSY (i have not used sapccm4x or any other ccms agent), also tried autoreaction method on local and it is working fine (SCOT is set up) but when i tried create and assign central autoreaction method (sapnote 429265) during assigning i receive error "no ccms agent avalable for system" and it is not working. Do I really need configure SAPCCM4X on all remote systems when i want to use central autoreaction? I dont feel very confortable with this solution. I think there must be some other smarter way (maybe in solution manager).
    We also tried to connect our RZ20 monitor set to nagios (used in our company to monitor non sap servers and email notification), but we are not able to compile the ccms nagios plugin uder 64bit. AIX 5.3.
    I also heard little bit about ALM (Alert management) but dont know anything about forwarding alerts from RZ20 to ALM and transmitting email from there. But I think this sollution would be the most difficult from all mentioned above.
    Thank you very much for any help

    Josef,
      Somewhat chasing the point here - when you have the Solman and you look in your CCMS and you can see the other systems - it is all RFC data and not actually on the Solution Manager (the only local MTE's are those tha belong to the Solution Manager).  For the Solution Manager to Centrally Auto-React to threasholds (act as the CEN System), the information needs to be passed to the Central System through the agents.
      If you want to do email threasholds on your remote systems, you can configure it on each of the systems individually without agents as this is a CCMS Function that any SAP System can do - but this is not Central Auto-Reaction.  This is just actions taken on individual systems based on local MTE's.
      To Centrally Auto-React - you have to add the agents so the information is passed to the CEN to react on.
      I hope that this has clarified the situation a bit more.  If this answers your question, please set this thread to answered.

  • 'Setup System Monitoring' option  is disabled in solution manager

    Hello,
    I am trying to setup system monitoring for different systems in solution manager but the 'Setup System Monitoring' is disabled.
    In solman I go to Solution_manager --> Operations Setup --> on the right side pane 'Setup System Monitoring' is disabled. How can you change this to change mode so that you can configure monitoring for different systems? Any idea, please help.
    Thank you in advance.
    Sameer
    Edited by: Sameer Pant on Mar 19, 2011 1:07 AM

    Hi Lakshmi,
    But when i right click on the qualifier
    No u hv to right click on a field to which Compound field is mapped ( Ur Main Table Field)
    Right Click on Compound field & choose option Set Qualified Update.
    New Links: Create
    Existing Links: Update (All Mapped Qualifiers)
    Thanks,
    Maheshwari

  • Solman Setup system Monitoring alert threshold value for Filesystem issue

    Hi,
    Our solman system is SAP EHP 1 for SAP Solution Manager 7.0 sp level 0024.
    We have setup the alerts System Monitoring alerts from DSWP in solman system for our target production system .
    But while assigning individual threshold values of filesystem freespace in MB for windows operating system disks C:,D:..all the values are getting changed after saving  to same value.(i.e if I update C:\ disk value and click on save rest of disks are also getting updated to this value).
    The same works fine for filessytems if target system OS is unix.
    I have tried the examples suggested in note:522453 but it nothing changed.Please suggest.

    Hi Sonal
    when you want to save the thresholds for only the one MTE you set
    you need to click on
    EDIT
    -> PROPERTIES
       -> USE FOR INDIVIDUAL MTE
    Kind Regards
    Marius

  • Add new Alerts to system monitoring

    Hi,
    My Name is Tomas Piqueres and I'm working with Solution Manager. I'm monitoring one of my systems and I'm setting up some alerts.
    The problem is when I'm trying to add some alerts that are outside the last node (the corresponding with the server name).
    For example, I want to activate an alert to see the free disk space in database, at satellite system I select the alert and set properties. Here I found the full name of the properties:
    <SID>\Microsoft SQL Server\Space management\DB:PRO\N:/MSSQL/PRODATA1/PRODATA1.mdf\PRODATA1 Free Disk Space
    With the full path, I go to my Solution Manager> transaction DSWP>Select my solution>Operation setup>Setup System Monitoring
    Here I only can add new User Defined Alerts for my server and my SAP System. If I select User Defined Alerts for my database I get the error No properties can be maintained for the selected node (MTE).
    If I try to add an alert for the server, the path for all of the alerts possible is <SID>\<server name>\.....
    So I can't add the alert I've got from satellite system.
    Is there any way to add more alerts?
    Please, could you help me?
    Thanks and regards,
    Tomas.
    Edited by: Tomas Piqueres on Mar 27, 2009 2:01 PM

    Hi Nesimi,
    That was exactly what I did but it didn't work.
    I've solved it changing the CCMS context.
    Thanks,
    Tomas.

  • Documentation for Alerts in System Monitoring (DSWP)

    Hello Community!
    I am working with SAP Solution Manager for about a week. At the moment i am trying to set up a useful system monitoring with System Monitor.
    Because i did not found a helpful documentation yet and i do not want to proceed in trail&error anymore - i want to know, if there is some kind of documentation for each standard alert in system monitoring function of the SolMa? For example "R3SysLog"-Alert complies with the results of  tcode SM21.
    Thanks for your answers in advance!

    Hi Helge,
    Refer to the following thread :
    [https://www.sdn.sap.com/irj/scn/thread?messageID=2309953#2309953]
    Also,refer to the following URL:
    [https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/a751a1ec-0a01-0010-f0ba-89e4c5cd0261]
    Hope this helps.
    Regards,
    Adren

  • System monitoring (standard alerting elements)

    Hello!
    I am about to set up system monitoring, primarly for my SOLMAN and of course for the sattelite systems.
    Is there some reccomendations, which (standard) alerting elements (e.g. daily tasks) are to choose for this issue? (e.g. DB check, short dumps, locked user, etc.)
    Thank you very much!
    regards

    Hi!
    Many thanks for your response.
    I would like to monitor all the systems with SAP DB, e.g. I would like to monitor DB part.
    The very interesting MTE class for me is CCMS_DB_mcmtc with the following elements:
    - Used Log Space
    - Last successful Complete Data Backup
    - Last Complete Data Backup Return Code
    The problem is, if I define this monitor in Tcode RZ20, then I receive the warning for the appropriate satelite system:
    <b><SID> : MTE class CCMS_DB_mcmtc : No MTEs currently available</b>
    What are the technical steps to solved this problem?
    Thank you very much indeed!
    regards

  • Running snow leopard on MBP and am not getting an sound alerts for Mail or Calendar; Have checked all setting in sound in the system preferences

    Running snow leopard on MBP and am not getting an sound alerts for Mail or Calendar; Have checked all setting in sound in the system preferences

    Hi..
    For Mail, from your Mail menu bar (top of your screen) click Mail > Preferences then select the General tab.
    Click the pop up menu to the right of New messages sound to make a selection.

  • Set up of System Monitoring with SPS 15 only through "Work center"

    Hi!
    We use SAP Solution Manager SPS 15 and would like to set up System Monitoring function in order to monitor satellite systems.
    Is is only possible as of SPS 15 with tcode "solman_workcenter"?
    I have heared as of SPS 15 the tcode "dswp" provides only Display view...
    Thank you very much!
    regards
    H. Thomasson

    Hello
    Is is only possible as of SPS 15 with tcode "solman_workcenter"?
    --> If you want to configure Solution Monitoring, you can follow rkt in service market place. With SP15, SAP has given additional functionality to access solutions or projects through work centers. Now its up to you to use this functionality or you can directly go to solution_manager or DSWP to configure, doesnt matter.
    I have heared as of SPS 15 the tcode "dswp" provides only Display view...
    --> Have you tried? Its not Display, either way through work center you are going to access the same transaction. Please check.
    Thanks
    Sharmishtha

  • Do not see Set-Up System Monitoring Button

    Dear Friends
    I have configurated the Maintenance Optimizer successfully
    Now I want to configure the system monitoring, but i do not see the Sep-Up system monitoring button in  the T-CODE solution_manager ---> Operation Setup, I only can see the :
    mySAP SCM Monitoring with SAP Solution Manager and CCMS
    SAP SRM 4.0/5.0 System Landscape Monitoring
    Could you help me?
    Best Regards

    Hi,
    From transaction SMSY, make sure you have the target system defined with proper connection setup. once it's defined, attach your target system to an existing or new Landscape solution.
    After that you should be able to see the config. option in transaction Solution Manager.
    Hope this helps,
    Kalyan.

  • Solution Manager Setup System Monitoring DB Administrating Alerts

    Greetings experts
    Can someone please explain how I can get "DB Administrating Alerts" to display in Solution Manager.
    Satellite system (FSD) database MTE's are all active (RZ20).
    Tcode: DSWP / tab:Solution Monitoring / tab:System Monitoring /
    Service: Setup System Monitoring
    Tree:
    Setup System Monitoring
                           +-->  SAP System FSD 1320011126
                                                             +-->  Database FSD-DATABASE                                                                               
    |
                                                                                    +-->  Administrating DB FSD-DATABASE (DB2 6000)                                                                               
    Issue: DB Administrating Alerts do not display.
    *Solution Manager 7.01 SP3 / DB2 09.05.0002 / AIX5.3
    Regards
    Peter Babbington

    HI
    1.Do i need to configure the CCMS_OnAlert_Email, for every alert that you have, in the satellite system?
    Best thing I would say is to copy method ( RZ21 --> Method --> Method definition )CCMS_OnAlert_Email to Z_CCMS_OnAlert_Email in Solman and assign this auto reaction to  MTE class of satellite systems.
    2. How do i configure this out of solution manager, and bypassing the satellite system?
    You have to install/configure sapccm4x( for monitoring abap ) on satellite systems by giving details about Solution manager. Then the alert will be sent to Solution manager from satellite system and the configured auto reaction will send mails .
    Also go through the links
    http://service.sap.com/moniotring
    https://www.sdn.sap.com/irj/sdn/docs?rid=/webcontent/uuid/30237989-0901-0010-70a4-944691eb5e52 [original link is broken]
    http://service.sap.com/rkt --> Solution manager --> Solman Manager < rel > --> Technology Consultants and System Administrator
    Thanks
    Prince Jose

Maybe you are looking for