System Not Finding Imaqdirectshowdll.dll

Hi There,
I was building a usb camera particle tracker vi and sent it to my personal computer to continue working on. When I tried opening the file Labview 2009 could not locate imaqdirecshowdll.dll. Thus I didn't have the NI-imaqdx functions in my palette and my vi wouldn't run anymore.
I tried looking online to see where I could download/install this dll to no avail. I also went to a NI training seminar where the guys there gave me the 2011 evaluation CDs. I installed all the drivers again and my system still can't locate this dll.
How should I go about finding the imaqdirectshow.dll?
Thank you very much!

Hi zoogie,
We offer two distinct software packages for our vision products. The Vision Development Module contains all of the image processing functions, but does not handle camera communication with the device. The camera communication is handled by the Vision Acquisition Software which installs drivers that allow you to interface with a number of camera buses. Starting with Vision Acquisition Software 2009, DirectShow imaging was included as a part of the NI-IMAQdx driver. However, it does not appear as if this ImaqDirectShowDll.dll is a part of that driver. Instead it is a part of an older driver, the NI-IMAQ for USB Cameras which was in use prior to 2009.
Since you are using LabVIEW 2009, you will probably have to use the following tool for 2009 or later compatibility: Upgrade IMAQ for USB to LabVIEW 2009
Once you install the NI-IMAQ for USB Cameras to your computer the ImaqDirectShowDll.dll will be located in the machine's system directory, typically C:\Windows\system32.
Please note that although NI-IMAQ for USB Cameras comes with documentation, it is not officially supported by National Instruments. Furthermore, it does not inherently work on Windows 7, although it appears some workarounds have been posted in the comments on the NI-IMAQ for USB Cameras page. I hope this helps!

Similar Messages

FF68 Manual Check Deposit - System not finding BELNR

I am using FF68 transaction for Customer Check Deposit. In the Variant for check deposit ( T code OT45) I have defined BELNR as selection field. However when I enter manual check through FF68 and give document number in field BELNR , system does not pickup document automaticlly. I need to go Transaction FEBA and enter the customer number manually to pickup document number. I want system automatically pickup document and do the clearing. Pls advise why even after entering document number in BELNR why system is not picking docment automatically.

Hi Sonia
Was BDC session generated on processing FF68?
Auro

Infopackage Idocs in status 2 - could not find code page for receiver system

Hi,
We just migrated our production system from BW 7.01 non unicode to BW 7.4 on HANA.
We now encounter issues with idocs while loading data into bw from our ECC5 source. When we analyze idocs in the source system it appears with the message "could not find code page for receiver system"
One weird thing is that the idoc seems to have been created before we started the infopackage in bw.. We controlled system time and AS time and everything seems ok.
We did not encounter this issues on our previous migration test runs..
Hope someone can help
Christophe

Hi,
Thanks for responding. We finally found out what the problem was.
We have two applications servers on our ECC with 2 different OS. One of them could not reach the new BW HANA server.
Regards
Christophe

The system could not find a javax.ws.rs.ext.MessageBodyWriter or a DataSourceProvider class for the com.rest.assignment.EmpBean type and application/json mediaType. Ensure that a javax.ws.rs.ext.MessageBodyWriter exists in the JAX-RS application for the

Hi,
Im trying to create a Rest WS with a @GET method that will return me an Emp object. I need the output as a JSON string.
I have created a dynamic web project and added javax RS jars:
When im trying to run this, i'm getting the below mentioned error:
FlushResultHa E org.apache.wink.server.internal.handlers.FlushResultHandler handleResponse The system could not find a javax.ws.rs.ext.MessageBodyWriter or a DataSourceProvider class for the com.rest.assignment.EmpBean type and application/json mediaType. Ensure that a javax.ws.rs.ext.MessageBodyWriter exists in the JAX-RS application for the type and media type specified.
RequestProces I org.apache.wink.server.internal.RequestProcessor logException The following error occurred during the invocation of the handlers chain: WebApplicationException (500 - Internal Server Error)
Please help as im stuck with this from long.
Thanks in advance.
Below is the code for my service class:
package com.rest.assignment;
import java.io.FileInputStream;
import java.io.FileNotFoundException;
import java.io.IOException;
import java.util.Enumeration;
import java.util.HashSet;
import java.util.Properties;
import java.util.Set;
import javax.ws.rs.GET;
import javax.ws.rs.Path;
import javax.ws.rs.Produces;
import javax.ws.rs.core.Application;
import javax.ws.rs.core.MediaType;
import javax.ws.rs.core.Response;
@Path("/restService")
public class RestService extends Application {
    @GET
    @Path("/getEmpDetails")
    @Produces(MediaType.APPLICATION_JSON)
    public Response getStringResponse()
        EmpBean empBean = new EmpBean();
        String filePath = "C:/Program Files/IBM/workspace/HelloWorld/src/com/rest/resources/EmpData.properties";
        Properties properties = new Properties();
        try {
            properties.load(new FileInputStream(filePath));
        } catch (FileNotFoundException e) {
            e.printStackTrace();
        } catch (IOException e) {
            e.printStackTrace();
         Enumeration e = properties.propertyNames();
         String result="";
        String[] empDetailsArr;
        while (e.hasMoreElements()) {
          String key = (String) e.nextElement();
          String empDetails = properties.getProperty(key);
          empDetailsArr=empDetails.split(",");
          empBean.setFirstName(empDetailsArr[0]);
          empBean.setLastName(empDetailsArr[1]);
          empBean.setEmpId(empDetailsArr[2]);
          empBean.setDesignation(empDetailsArr[3]);
          empBean.setSkillSet(empDetailsArr[4]);
          result = empDetailsArr[1];
        //return empBean;
        return Response.ok(empBean).type(MediaType.APPLICATION_JSON_TYPE).build();
    @Override
    public Set<Class<?>> getClasses() {
        Set<Class<?>> classes = new HashSet<Class<?>>();
        classes.add(RestService.class);
        classes.add(EmpBean.class);
        return classes;
and my empBean goes like this:
package com.rest.assignment;
public class EmpBean {
    private String firstName;
    private String lastName;
    private String empId;
    private String designation;
    private String skillSet;
    public String getFirstName() {
        return firstName;
    public void setFirstName(String firstName) {
        this.firstName = firstName;
    public String getLastName() {
        return lastName;
    public void setLastName(String lastName) {
        this.lastName = lastName;
    public String getEmpId() {
        return empId;
    public void setEmpId(String empId) {
        this.empId = empId;
    public String getDesignation() {
        return designation;
    public void setDesignation(String designation) {
        this.designation = designation;
    public String getSkillSet() {
        return skillSet;
    public void setSkillSet(String skillSet) {
        this.skillSet = skillSet;
Web.xml goes like this:
<?xml version="1.0" encoding="UTF-8"?>
<web-app id="WebApp_ID" version="3.0" xmlns="http://java.sun.com/xml/ns/javaee" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://java.sun.com/xml/ns/javaee http://java.sun.com/xml/ns/javaee/web-app_3_0.xsd">
<display-name>restWS</display-name>
<welcome-file-list>
<welcome-file>index.html</welcome-file>
<welcome-file>index.htm</welcome-file>
<welcome-file>index.jsp</welcome-file>
<welcome-file>default.html</welcome-file>
<welcome-file>default.htm</welcome-file>
<welcome-file>default.jsp</welcome-file>
</welcome-file-list>
<servlet>
<servlet-name>REST</servlet-name>
<servlet-class>com.ibm.websphere.jaxrs.server.IBMRestServlet</servlet-class>
<init-param>
   <param-name>javax.ws.rs.Application</param-name>
   <param-value>com.rest.assignment.RestService</param-value>
</init-param>
<load-on-startup>1</load-on-startup>
</servlet>
<servlet-mapping>
<servlet-name>REST</servlet-name>
<url-pattern>/rest/*</url-pattern>
</servlet-mapping>
</web-app>
When i try to return a string from my get method, it gives me a proper response. i get this exception when im trying to return a JSON response.

Hi,
Im trying to create a Rest WS with a @GET method that will return me an Emp object. I need the output as a JSON string.
I have created a dynamic web project and added javax RS jars:
When im trying to run this, i'm getting the below mentioned error:
FlushResultHa E org.apache.wink.server.internal.handlers.FlushResultHandler handleResponse The system could not find a javax.ws.rs.ext.MessageBodyWriter or a DataSourceProvider class for the com.rest.assignment.EmpBean type and application/json mediaType. Ensure that a javax.ws.rs.ext.MessageBodyWriter exists in the JAX-RS application for the type and media type specified.
RequestProces I org.apache.wink.server.internal.RequestProcessor logException The following error occurred during the invocation of the handlers chain: WebApplicationException (500 - Internal Server Error)
Please help as im stuck with this from long.
Thanks in advance.
Below is the code for my service class:
package com.rest.assignment;
import java.io.FileInputStream;
import java.io.FileNotFoundException;
import java.io.IOException;
import java.util.Enumeration;
import java.util.HashSet;
import java.util.Properties;
import java.util.Set;
import javax.ws.rs.GET;
import javax.ws.rs.Path;
import javax.ws.rs.Produces;
import javax.ws.rs.core.Application;
import javax.ws.rs.core.MediaType;
import javax.ws.rs.core.Response;
@Path("/restService")
public class RestService extends Application {
    @GET
    @Path("/getEmpDetails")
    @Produces(MediaType.APPLICATION_JSON)
    public Response getStringResponse()
        EmpBean empBean = new EmpBean();
        String filePath = "C:/Program Files/IBM/workspace/HelloWorld/src/com/rest/resources/EmpData.properties";
        Properties properties = new Properties();
        try {
            properties.load(new FileInputStream(filePath));
        } catch (FileNotFoundException e) {
            e.printStackTrace();
        } catch (IOException e) {
            e.printStackTrace();
         Enumeration e = properties.propertyNames();
         String result="";
        String[] empDetailsArr;
        while (e.hasMoreElements()) {
          String key = (String) e.nextElement();
          String empDetails = properties.getProperty(key);
          empDetailsArr=empDetails.split(",");
          empBean.setFirstName(empDetailsArr[0]);
          empBean.setLastName(empDetailsArr[1]);
          empBean.setEmpId(empDetailsArr[2]);
          empBean.setDesignation(empDetailsArr[3]);
          empBean.setSkillSet(empDetailsArr[4]);
          result = empDetailsArr[1];
        //return empBean;
        return Response.ok(empBean).type(MediaType.APPLICATION_JSON_TYPE).build();
    @Override
    public Set<Class<?>> getClasses() {
        Set<Class<?>> classes = new HashSet<Class<?>>();
        classes.add(RestService.class);
        classes.add(EmpBean.class);
        return classes;
and my empBean goes like this:
package com.rest.assignment;
public class EmpBean {
    private String firstName;
    private String lastName;
    private String empId;
    private String designation;
    private String skillSet;
    public String getFirstName() {
        return firstName;
    public void setFirstName(String firstName) {
        this.firstName = firstName;
    public String getLastName() {
        return lastName;
    public void setLastName(String lastName) {
        this.lastName = lastName;
    public String getEmpId() {
        return empId;
    public void setEmpId(String empId) {
        this.empId = empId;
    public String getDesignation() {
        return designation;
    public void setDesignation(String designation) {
        this.designation = designation;
    public String getSkillSet() {
        return skillSet;
    public void setSkillSet(String skillSet) {
        this.skillSet = skillSet;
Web.xml goes like this:
<?xml version="1.0" encoding="UTF-8"?>
<web-app id="WebApp_ID" version="3.0" xmlns="http://java.sun.com/xml/ns/javaee" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://java.sun.com/xml/ns/javaee http://java.sun.com/xml/ns/javaee/web-app_3_0.xsd">
<display-name>restWS</display-name>
<welcome-file-list>
<welcome-file>index.html</welcome-file>
<welcome-file>index.htm</welcome-file>
<welcome-file>index.jsp</welcome-file>
<welcome-file>default.html</welcome-file>
<welcome-file>default.htm</welcome-file>
<welcome-file>default.jsp</welcome-file>
</welcome-file-list>
<servlet>
<servlet-name>REST</servlet-name>
<servlet-class>com.ibm.websphere.jaxrs.server.IBMRestServlet</servlet-class>
<init-param>
   <param-name>javax.ws.rs.Application</param-name>
   <param-value>com.rest.assignment.RestService</param-value>
</init-param>
<load-on-startup>1</load-on-startup>
</servlet>
<servlet-mapping>
<servlet-name>REST</servlet-name>
<url-pattern>/rest/*</url-pattern>
</servlet-mapping>
</web-app>
When i try to return a string from my get method, it gives me a proper response. i get this exception when im trying to return a JSON response.

I am trying to connect my macbook air through my led tv using hdmi but it won't work. I could not find arrangement option on my system preference. how do i make it appear again on my system preference so i can mirror it through my tv. thanks

I am trying to connect my macbook air through my led tv using hdmi but it won't work. I could not find arrangement option on my system preference. how do i make it appear again on my system preference so i can mirror it through my tv. thanks

Hi jenette,
If you are having issues using an HDTV via HDMI as an external display to your MacBook Air, you may find the following article helpful:
OS X: How to use multiple displays with your Mac in Mountain Lion and earlier
http://support.apple.com/kb/ht5019
(Note: You will generally only see the arrangement option in Displays when you are configured to use the external display in Extended Desktop mode; there is no arrangement in Mirroring as both screens are showing the same image.)
Regards,
- Brenden

Windows SharePoint Services Error: Exception Details: System.IO.FileNotFoundException: Could not find the application on the Web

I am developing a WSS based WCM site for a customer which has a bilingual interface. Now everything is wokring fine in the development environment. Today I backed-up the Content Database and took the related control file (.ascx & .ascx.cs) to deploy it to the cusomter's test machine. I dint face any problems with the deployment, and after deleted and added the Content DB from Central Administration, I was able to access the English part of the website along with my changes without any problem.
But when I tried accessing the Arbic part of the website, Its giving me the following error,
تعذر العثور على تطبيق ويب الموجود على http://172.20.5.163/ar/. تأكد من كتابتك لمحدد موقع المعلومات (URL) بشكل صحيح. إذا كان URL يؤدي إلى محتوى موجود، يجب على مسؤول النظام إضافة تعيين URL للتطبيق المراد خاص بالطلب الجديد.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.IO.FileNotFoundException: تعذر العثور على تطبيق ويب الموجود على http://172.20.5.163/ar/. تأكد من كتابتك لمحدد موقع المعلومات (URL) بشكل صحيح. إذا كان URL يؤدي إلى محتوى موجود، يجب على مسؤول النظام إضافة تعيين URL للتطبيق المراد خاص بالطلب الجديد.
Roughly translated, it means "Could not find the application on the Web http://172.20.5.163/ar/. Make sure you create your site specific information (URL) correctly. If the URL to the content of lead present, the system administrator to add URL for the application of the appointment of a special request to be new.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.IO.FileNotFoundException: Could not find the application on the Web http://172.20.5.163/ar/. Make sure you create your site specific information (URL) correctly. If the URL to the content of lead present, the system administrator to add URL for the application of the appointment of a special request to be new."
Can you please tell me what is the cause of the problem and how to rectify it? Also do I need to
Regards,
SoniSSP

It is searching for the page, but that page is not available. Did u install the current language pack?

Receiving error message 'Could not load file or assembly 'System.ServiceModel.Activation, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35' or one of its dependencies. The system cannot find the file specified.'

I started getting this error message for the first time today. When I look in the event log I see it every time anyone tries to sync to a mobile device to the exchange server. I've also had this problem trying to connect using
Outlook. I believe it is an IIS issue but I'm not absolutely sure so I'm posting this in the Exchange forum as well.
The event viewer has the following information...
3008
A configuration error has occurred.
5/1/2014 10:41:08 PM
5/2/2014 5:41:08 AM
7539d8a38c8b47869eda3f1749aba08d
1
1
0
/LM/W3SVC/1/ROOT/Microsoft-Server-ActiveSync-75-130434828686436855
Full
/Microsoft-Server-ActiveSync
C:\Program Files\Microsoft\Exchange Server\V14\ClientAccess\sync\
SERVER
16284
w3wp.exe
NT AUTHORITY\SYSTEM
ConfigurationErrorsException
Could not load file or assembly 'System.ServiceModel.Activation, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35' or one of its dependencies. The system cannot find the file specified.
https://remote.testserver.com:443/Microsoft-Server-ActiveSync/default.eas?User=user.name&DeviceId=ApplC39GQ5xxxxxx&DeviceType=iPhone&Cmd=Ping
/Microsoft-Server-ActiveSync/default.eas
174.224.130.31
False
NT AUTHORITY\SYSTEM
24
NT AUTHORITY\SYSTEM
False
at System.Web.Configuration.ConfigUtil.GetType(String typeName, String propertyName, ConfigurationElement configElement, XmlNode node, Boolean checkAptcaBit, Boolean ignoreCase) at System.Web.Configuration.Common.ModulesEntry..ctor(String name, String typeName, String propertyName, ConfigurationElement configElement) at System.Web.HttpApplication.BuildIntegratedModuleCollection(List`1 moduleList) at System.Web.HttpApplication.GetModuleCollection(IntPtr appContext) at System.Web.HttpApplication.RegisterEventSubscriptionsWithIIS(IntPtr appContext, HttpContext context, MethodInfo[] handlers) at System.Web.HttpApplication.InitSpecial(HttpApplicationState state, MethodInfo[] handlers, IntPtr appContext, HttpContext context) at System.Web.HttpApplicationFactory.GetSpecialApplicationInstance(IntPtr appContext, HttpContext context) at System.Web.Hosting.PipelineRuntime.InitializeApplication(IntPtr appContext)
I have tried most, if not all, of the different post's suggestions to no avail.
The steps I have taken are as follows...
1. Repaired .Net 4 (Both the client and extended)
2. Uninstalled and reinstalled .Net Framework 4.0.
3. Verified that the dll exists.
4. Checked the applicationHost.config file. It contains the follow statement...
<add name="ServiceModel-4.0" type="System.ServiceModel.Activation.ServiceHttpModule, System.ServiceModel.Activation, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" preCondition="managedHandler,runtimeVersionv2.0"
/>
5. Changed the following line in web.config to include the runtimeVersion...
<add name="ServiceModel" type="System.ServiceModel.Activation.HttpModule, System.ServiceModel.Activation, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" preCondition="managedHandler,runtimeVersionv2.0" />
6. Executed aspnet_regiis.exe -iru from the ...\Framework64\v4.0.30319 directory.
7. Went to inetpub\history to use an applicationHost.config file from yesterday but it only has history from 9PM tonight. It probably had what I needed before I started changing it tonight.
I still receive the same error message.
Like I said everything was working yesterday. In fact I didn't hear or see any issue until after 1PM today.
Any help would be very appreciated!

Hi,
Please confirm whether users can access their mailboxes from Outlook Web Access or not. We can do the following changes to have a try:
1. In IIS > Application Pools, change the .NET Framework Version to v2.0 and restart IIS service.
2. If it doesn’t work, explore the Default Web site.
3. Renamed the web.config file to web.config.old
4. Reset IIS using iisreset command to have a try.
Thanks,
Winnie Liang
TechNet Community Support

The save for the web function has stopped working in my copy of photoshop elements 12. I get this message, " The operation could not be completed. The system cannot find the path specified" Resetting preferences did not fix.

The save for the web function has stopped working in my copy of photoshop elements 12. I get this message, “ The operation could not be completed. The system cannot find the path specified” Resetting preferences did not fix.

my os is windows 7. elements 12 worked fine for many months then save for the web stopped working

While loading site collection in SharePoint 2010, Error shows "Could not find the file or assembly or one of its dependencies. The system cannot find the file specified."

I have restored one web application in SharePoint Server 2010 from a different domain and can complete successfully. Changed each users domain also to old to new one by using Move-SPUser. But While accessing the site collection it is showing an error
that "Could not load file or assembly 'A##.SP.Intranet, Version=1.0.0.0, Culture=neutral, PublicKeyToken=03b4f320ebedaffc' or one of its dependencies. The system cannot find the file specified."
What may be the reason? Please help me to solve this issue since I am stuck up on this .
Regards
Mine1981

Hi Nico
Martens,
Thank you for your reply. But
how can I find out the custom solutions in the source farm. I didn't got any other details regarding this farm other than WSS_Content, Web application Database, SharePoint_Config database back ups.
Please help me to solve the
issue.
Regards
Mine

SSIS File System Task Move File Could not find part of the path error

Hi All,
I am getting error in production when try to move files from one folder to another folder. But on Dev environment working fine.
An error occurred with the following error message: "Could not find a part of the path 'C:\Archive\ABC.txt'
My package configuration details.
1) For Each loop Container
Prop’s:
Enumerator: For Each File Enumerator
Folder: C:\
Files: *.txt
Retrieve File name --> Fully qualified
In Tab Variable mapping: User::name --0
2) File System task
Props:
Destination Connection: c:\archive\
Overwrite destination: True
Operation: Move file
Is Source Path Variable: True
Source Variable: User::name
Please share your suggestions on this.
Regards,
Vaishu

Hi Vaishu ,
Try below links :
http://www.allaboutmssql.com/2012/09/sql-server-integration-services-rename.html
http://social.technet.microsoft.com/wiki/contents/articles/18776.ssis-move-a-folder-from-one-drive-to-another-drive-using-the-file-system-task.aspx
sathya - www.allaboutmssql.com ** Mark as answered if my post solved your problem and Vote as helpful if my post was useful **.

FF not connecting to web- This "Network Connections" message pops up: Error 623: The system could not find the phone book entry for this connection. Any ideas?

About a month ago I could no longer connect to the internet on our PC. Every time I clicked on the Firefox icon the Netscape sign-on window would pop up. I would try to close it but it would pop up over and over again. If I tried to close it a dozen or so times eventually Firefox would open up but it would never connect. Just today I moved my Netscape file to the recycle bin. No longer does the Netscape sign-on window pop up but following Network Connection error message pops up: "Error 623: The system could not find the phone book entry for this connection".. This error window behaves the same way the Netscape sign-on window used to behave. Every time I click to close it it pops open again. After numerous clicks Firefox opens up but it never connects.

Do you have this error message on a Mac computer or on a Windows computer?
I've only seen this error mentioned on a Windows computer.
*http://kb.mozillazine.org/Autoconnect

HP OFFICEJET PRO 8500 - Will not install on wintows 8.1- says SYSTEM CANNOT FIND SPECIFIC FILE

My HP Officejet 8500 will not install on windows 8.1. The error message says:
The system will not find the specific file

Hi,
Follow the steps below and check if that resolve the issue:
1. Open Mcafee software, from the Virus and Spyware Protection section click on Schedule and run scans. Click on Real time scanning and then on Turn Off. select till I restart the PC and confirm by clicking the Turn Off button.
Now try reinstalling the HP Software and check if the error no longer appear..
If the issue persists continue follwoing the next steps below:
2. Open the run dialog by clicking both the Windows key and the R key on your keyboard. Type %windir% and click on OK.
3. Type hpoins*.dat into the top search bar, if there are any results rename the extention into old instead of dat. (e.g. hpoins1.old)
4. Type hpwins*.dat into the top search bar, if there are any results rename the extention into old instead of dat. (e.g. hpwins1.old)
5. Launch the Run dialog by clicking both the Windows key and the R key on your keyboard. Type MSIEXEC /UNREGISTER into the Run dialog and click on OK.
6. Launch the Run dialog by clicking both the Windows key and the R key on your keyboard. Type MSIEXEC /REGSERVER into the Run dialog and click on OK.
7. Run the installation file and check for any difference.
Regards,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Moving files to another directory got an error message [File System Task] Error: An error occurred with the following error message: "Could not find a part of the path.".

Hi all,
I am having a list of files in a folder named datafiles and I am processing them one by one when I finish each one I want to move the file into a folder archive.
I am having a variable named filename and archivefilename and two fileconnections one is originalfiles and archivefiles
archivefilename=replace( @[User::filename],"datafiles","archive")
orginalfiles connection is an expression =@user:filename
archivefies connection is an expression=@user:archivefilename
the filename comes from reading the folder that contains those files
public void Main()
            string[] filenames;
            filenames = Directory.GetFiles(@"C:\luminis\datafiles\");
            Array.Sort(filenames);
            Dts.Variables["filelist"].Value = filenames;
            Dts.TaskResult = (int)ScriptResults.Success;
The folder c:\luminis\archive\ exists
why I am getting this error
My filesystem task : destinationpathvariable =false
destinationconnection:archivefile
overwrite=true
operation=movefile
issourcepathvariable=false
sourceconnection=original file
why am i getting this error[File System Task] Error: An error occurred with the following error message: "Could not find a part of the path.".
sohairzaki

there may be 2 problem...
1> specify a target directory only, not with the file name.
OR
2> Try using the unc,path format \\computername\sharename\
let us know your observation...
Let us TRY this | Mail me
My Blog :: http://quest4gen.blogspot.com/

System.IO.DirectoryNotFoundException: Could not find a part of the path 'D:\SavingTextfile\sampletext_44.txt'.

HI,
I am writing Some orders into
Text file under button control.It was writing under
file system under my physical directory. suddenly i got error :
Could not find a part of the path 'D:\SavingTextfile\sampletext_44.txt'.
I wrote in web.config file:
<Appsettings>
<add key="OrdersList" value="D:\\SavingTextfile\\sampletext.txt"/>
</Appsettings>
In Local system,i am storing like this:
D:\sampletext
My Code:
protected void btnSubmit_Click(object sender, EventArgs e)
string Orderslist = System.Configuration.ConfigurationManager.AppSettings["OrdersList"].ToString();
string fileName = Orderslist;
string fileText = fileName + "_" +DateTime.Now.ToString();
fileText = fileText.Replace(".txt", "") + ".txt";
fileText = fileText.Trim();
//Check if file already exists. If yes, delete it.
if (File.Exists(fileText))
File.Delete(fileText);
// Create a
new file
using (StreamWriter streamWriter = new StreamWriter(fileText))
streamWriter.WriteLine("order1");
streamWriter.WriteLine("order2");
Thanks in Advance:

Hi,
Thanks for responding....
In App pool,Where i need to check permission. i.e. Current logged user permissions or some other permissions.
Actually text files are storing under D drive...But some times only getting error...
Could not find a part of the path 'D:\SavingTextfile\sampletext_44.txt
when i close the browser and reset IIS,again open browser and submit details,it is saving in the give path
D:\SavingTextfile
Help me...
Thanks.

Upgrading to MBAM 2.5: Could not load file or assembly 'System.Web.WebPages.Razor, Version=2.0.0.0.....the system cannot find the file specified.

Upgrading from MBAM 1.0 to 2.5 on the Administration and Monitoring server (database server already upgraded). To upgrade the administration server, I uninstalled MBAM 1.0 -> Deleted the MBAM website from IIS manually -> Reboot -> Installed MBAM
2.5. After upgrade if I go to selfservice portal via
https://myserver.mycompany.com/selfservice, I get this error:
Server Error in '/SelfService' Application.
Could not load file or assembly 'System.Web.WebPages.Razor,
Version=2.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35' or one of its
dependencies. The system cannot find the file specified.
Description:
An unhandled exception occurred during the execution of the current web
request. Please review the stack trace for more information about the error and
where it originated in the code.
Exception Details:
System.IO.FileNotFoundException: Could not load file or assembly
'System.Web.WebPages.Razor, Version=2.0.0.0, Culture=neutral,
PublicKeyToken=31bf3856ad364e35' or one of its dependencies. The system cannot
find the file specified.
Source Error:
An unhandled exception was generated during the execution of the
current web request. Information regarding the origin and location of the
exception can be identified using the exception stack trace below.
Stack Trace:
[FileNotFoundException: Could not load file or assembly 'System.Web.WebPages.Razor, Version=2.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35' or one of its dependencies. The system cannot find the file specified.]
System.Web.Mvc.PreApplicationStartCode.Start() +0
[InvalidOperationException: The pre-application start initialization method Start on type System.Web.Mvc.PreApplicationStartCode threw an exception with the following error message: Could not load file or assembly 'System.Web.WebPages.Razor, Version=2.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35' or one of its dependencies. The system cannot find the file specified..]
System.Web.Compilation.BuildManager.InvokePreStartInitMethodsCore(ICollection`1 methods, Func`1 setHostingEnvironmentCultures) +12980619
System.Web.Compilation.BuildManager.InvokePreStartInitMethods(ICollection`1 methods) +12980328
System.Web.Compilation.BuildManager.CallPreStartInitMethods(String preStartInitListPath, Boolean& isRefAssemblyLoaded) +280
System.Web.Compilation.BuildManager.ExecutePreAppStart() +172
System.Web.Hosting.HostingEnvironment.Initialize(ApplicationManager appManager, IApplicationHost appHost, IConfigMapPathFactory configMapPathFactory, HostingEnvironmentParameters hostingParameters, PolicyLevel policyLevel, Exception appDomainCreationException) +1151
[HttpException (0x80004005): The pre-application start initialization method Start on type System.Web.Mvc.PreApplicationStartCode threw an exception with the following error message: Could not load file or assembly 'System.Web.WebPages.Razor, Version=2.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35' or one of its dependencies. The system cannot find the file specified..]
System.Web.HttpRuntime.FirstRequestInit(HttpContext context) +12979668
System.Web.HttpRuntime.EnsureFirstRequestInit(HttpContext context) +159
System.Web.HttpRuntime.ProcessRequestNotificationPrivate(IIS7WorkerRequest wr, HttpContext context) +12819261
Anyone know how to solve this? Thanks in advance

Sorry for late response. I fixed the issue by installing the correct version of ASP .NET 4 from
here.
If .NET Framework 4.5 is already installed, also run aspnet_regiis -i from C:\windows\microsoft.net\Framework\v4.0.30319

System Not Finding Imaqdirect​showdll.dl​l

Similar Messages

Maybe you are looking for

System Not Finding Imaqdirectshowdll.dll