System not recognising the ~ as separator in txt file.

Hi,
In File2File senario, Sender system is placing txt file with 5 fields in the FTP server as mentioned below,
I have given "~" as fieldseparator and 'nl' as new line.
Fielsender.txt
Onetwothreefourfive
sixseveneightniniten
I have done all the Design and configuration in the XI.
In datatype defination I have given below structure.
File_MT
        Data
            ITEM
                 Field1  xsd:string
                 Field2  xsd:string
                 Field5  xsd:string
Problem: While executing this in Request payloads, the entire row ita taking into Field1 and its not
recnizing the ~ as separator.
Ex: <xml>...
      <Data>
      <item>
     <field1>Onetwothreefourfive</field1>
    </item>
    <item>
    <field1>sixseveneightniniten>
    </item></Data>
Can anyone tell me where I am doing wrong and how can we overcome this.
Thanks in advance
Balaji.

Thanks for your reply...
Its working for me, I have one more question.
In recever system I have give tab '0x09' as the file separator but I am getting the same file in recever side also.
Onetwothreefourfive
sixseveneightnineten
In recevier side the field separator in not working.
Can you please tell me where I am doing wrong.
thanks in advance.
Balaji.

Similar Messages

  • System not recognising the '0x09' TAB  as separator in txt file.

    Hi All,
    In recever system I have give tab separator '0x09' as the field separator but I am getting the same file in recever side also.
    ex: sender
    Onetwothreefourfive
    sixseveneightnineten
    receiver:
    Onetwothreefourfive
    sixseveneightnineten
    In recevier side the field separator in not working.
    Can you please tell me where I am doing wrong.
    thanks in advance.
    venkat

    Hey,
    Do not copy and paste the FCC parameters from microsoft word (other editors too) because some times it contains hidden foot prints which can not be seen and they creates the problem.
    Create a new CC without using copy n paste e.g. field names and use '0x09' as separator and try again.
    Regards,
    Sarvesh

  • Bridge and Photoshop CS4 will not recognise the images shot in NEF file

    Shot in Nikon D810 with NEF file but the images will not recognise with Bridge and Photo
    shop CS4

    That camera was recently supported for the first time by ACR 8.6, which needs at least CS6 to run.  You will never be able to open those raw NEF files in CS4, as there will never be an update for CS4.
    Your choices are to upgrade, or to use the free, stand-alone Adobe DNG Converter 8.6 on each and every batch of raw NEF files in order to convert them to raw DNGs that you can open in CS4.
    Mac:
    Adobe - Adobe Camera Raw and DNG Converter : For Macintosh : Adobe DNG Converter 8.6
    Windows:
    Adobe - Adobe Camera Raw and DNG Converter : For Windows : Adobe DNG Converter 8.6

  • Can not reverse the column information of .txt file

    Hi,
    I created the file data server and tested the jdbc connection. The connection is ok. when I create datastore and reverse the columns information, no error occurs , but no information is displayed in the columns below.why?
    thanks.
    arthur

    Hello all,
    I had the same problem while trying to reverse engineer a delimited file. Luckily your post fixed it and I just wanted to report that.
    ODI generated no error, but no columns were displayed. In other words, nothing happened when I clicked on the "Reverse" button in the column tab of that model.
    But, it worked when I tried it without locking the model. Thanks.

  • HT201303 I tried to update my security questions this morning but got timed out.  Ive just tried to get into my account but the system does not recognise the answers to my question.  How can I rectify this problem please

    I was trying to update my Security Questions this morning but got 'Timed Out' I've just tried again to get into my security settings but the system does not recognise the information I'm putting in. Can anyone tell me how I can correct this problem.  I can still log-in.
    Best wishes

    Welcome to the Apple Community.
    You might try to see if you can change your security questions. Start here, change your country if necessary and go to manage your account > Password and Security.
    I'm able to do this, others say they need to input answers to their current security questions in order to make changes, I'm inclined to think its worth a try, you don't have anything to lose.
    If that doesn't help you might try contacting Apple through Express Lane (select your country, navigate to iCloud help and enter the serial number of one of your devices)

  • Pc suite dos not recognise the connect phone.

    I am receiving the error message "pc suite dos not recognise the connect phone.
    the connection between the pc and the phone failed, error code 0x80043605. Switch off your phone, switch it on, and try again."
    Any idea?
    Operative System: Windows XP SP 2
    PC Suite version: 6.80.20
    Mobile: 7250i
    Connection method: cable DKU5
    BR,
    Leandra

    Hi, did running PC suite cleaner 3.3 work for you? I am having exactly the same problem and tried this. PC suite cleaner didn't seem to run properly. I chose the "other" problem type and it said that it could not create a list of directories, please reboot and try again. I did this but no good. I then reloaded PC suite and got the same results.
    My phone is 6230i
    PC suite version is 8.80.21
    Thanks!

  • Java version 7 update 9 update was installed, Computer Mac  version 10.7.5 will not recognise the download.  Please advise .  Is there another link for a download that will work.

    I downloaded the Java update version 7 update 9 as advised by computer - but the computer does not recognize the download - as instructed I  pressed Command R and also tried Command Q
    I downloaded the update twice - still the computer does not recognise the download.
    In my serarch on the web there seems to be issues in this download.
    I think there is an new patch  ,  Not sure where to find this that is relevant to my computer.
    Be grateful if someone could send me a link and instructions on the relevant choice for my computer.
    Also Do I need to uninstall old Java downloads.  if yes Please advisee how I should do this.
    Be grateful if you could send me a link that will allow the updated Java to be recogized by my computer Mac Version 10.7.5
    thank you
    Sue

    I have downloaded the latest Java  (JRE)  and Java is checked enabled as well as  JavaScipt and Web plug-ins are enabled.
    I thought I would download once again  from your link - MacOSX jre7u6 Macosx-x64 dmg.
    On opening the package to install was advised that a higher version of the JRE is already installed on the system.
    Still unable to open my Labs software as the advice is still to download the latest Java.
    Checking the net again found another Java option for Mac Lion - so I downloaded and installed the version OS X2012 -006.
    Still no joy,  as my photo Lab software keeps givng me the same message that i to open " RGB Digital Direct" I need to download the Java Runtime Environment for Web Start Application.
    I  then went back into Java Website and it gave an option to detect whether I have the correct Java Software - report came back - Verified Java Version - " Congratulations You have the recommended Java installed ( Version 7 Update 9)"
    BE grateful of your expert advice.
    Sue

  • I have an iPod touch 4th generation and have tried to connect it to my Sony BDV-E970W blu-ray player. The player does not recognise the iPod. What can I do to fix this?

    I have an iPod Touch 4th gen player and cannot connect to a Sony blu-ray BDV-E970W player. Sony system does not recognise the iPod. Do I need to link the Sony to the net and upgrade the software on the dvd player?

    As the other replier said, contact Sony. It may not be compatible with the iPod.

  • After a power outage my usb ports on the back of the tower do not recognise the apple usb keyboard upon start up. How do I fix this issue?

    I have a Mac Pro 5.1 and after a power outage my usb ports on the back of the tower do not recognise the apple usb keyboard upon start up. If I leave the plug out and then insert the keyboard after start up it works fine. The same happens with the front usb ports. How do I fix this issue?

    System.log says USB related message?
    Resetting SMC as well as NVRAM could solve the problem.
    Intel-based Macs: Resetting the System Management Controller (SMC)
    About NVRAM and PRAM

  • I want to install Logos on an NT4 workstation. When I click on the "Logos.msi" file the "Open with" popup box appear. NT4 does not recognise the "Logoshe Logos software on a .msi" file.

    I want to upgrade the Citadel database with the Logos software. I have download the Logos.zip file from NI, unzipped it and install it on a WIN2000 system with no problem. When I tried to install it on a NT4 workstation by clicking on the "Logos.msi" file the "Open with" popup box appear. Thus NT4 does not recognise the ".msi" file.

    Karolus,
    most likely you did not install any newer software packages on this Windows NT machine. NT does not have the MSI installer engine preinstalled thus the first MSI based software would install this engine. E.g. if you install Lookout 4.5.1 or 5.0 before you try to upgrade Logos this should not be a problem anymore. Or if you install DSC that means LabVIEW 6.1 before this shouldn't be a problem either.
    If you really want to install just Logos alone than you would need to install the MSI engine manually before by executing the InstMsiw.exe from your CD. You might get this MSI engine as well from Microsoft.
    Hope this helps
    Roland

  • I have a 16GB iPhone 3GS. Tried synching my phone through iTunes (11.0.1 I think... on a 2009 Macbook Pro). Now when I connect to iTunes, it says it does not recognise the content on my phone. Is this because my phone (and laptop) are too old?

    I have a 16GB iPhone 3GS. Tried synching my phone through iTunes (11.0.1 I think... on a 2009 Macbook Pro). Now when I connect to iTunes, it says it does not recognise the content on my phone. Is this because my phone (and laptop) are too old?
    Also, when I tried to Restore the settings, an Error Message pops up that says " The iPhone software update server could not be contacted. The requested resource was not found.
    I'm trying to free up space on my phone by removing [literally] thousands of old photos which were originally synched to the phone, because I had forgotten to uncheck the photos button when I synched it ages ago.
    I have also tried synching it on my 24" iMac (running OSX Snow Leopard). But again, when I try restoring the phone through itunes, it says the file is corrupted. It sggests unplugging the device, and then plugging it in again. I have done this numerous times with no success.
    I'm guessing it must be because my phone (and versions of iTunes, and OSX) are all too old.
    Please can anybody help.
    Cheers,
    Dan_nz.

    There are multiple reasons that lead to issue. You should read the troubleshooting guide to get the right solution to solve the issue: iPhone, iPad, or iPod touch not recognized in iTunes for Windows - Apple Support

  • I have recently got a new windows lap top and transfered by itunes library to it successfully. i cannot however sync downloads to my ipod classic and my lap top is not recognising the ipod at all. Please help ! Thank you.

    I have recently changed lap tops and moved my itunes library successfully.
    However I cannot now synce my ipod classic with the new windows pc.
    The lap top is not recognising the ipod. 
    I have spoken to apple and they think its a settings issue on my pc ? I have fully deleted and then reinstalled itunes .
    can any one help ? This should be easy to resolve but appears to be a common issue when looking on the web.
    Thank you

    Here is what worked for me:
      My usb hub, being usb2, was too fast. I moved the wire to a usb port directory on my pc. That is a usb1 port which is slow enough to run your snyc.

  • Equium M50 will not recognise the LAN port - error: Network Cable unplugged

    I own a Toshiba Equium M50 and have problems with the Marvell Yukon 88E8036 PCI-E Fast Ethernet Controller.
    I used to connect via an 'ADDON' Modem/ADSL Switch and had no problems. I then replaced the ADDON with a 'NETGEAR' DG834G ADSL Modem/Router to gain the wireless port, and since then my machine will not recognise the LAN port. <error: Network Cable unplugged>.
    I know that the cables are OK as I used them with other laptops and had no trouble. I can also plug in a PCI card to connect without any problems. It looks to me as if the Marvell Yukon 88E8036 PCI-E Fast Ethernet Controller has a problem with the netgear Modem/Router.
    Anyone out there with a similar experience and some advice/suggestions?
    PLEASE

    Hi
    For me it doesnt show like a LAN card problem but your router is a problem.
    Check the device manager if the LAN card was properly recognized. If there are no yellow exclamation marks so everything is ok!
    You can try to delete the LAN card from the device manager and after new reboot install the LAN driver again.
    The issue has stared after installing or connecting the new Netgear modem router.
    Therefore I would recommend to checking firstly the settings or to update the firmware on this router.
    I have found additionally these useful websites
    http://compnetworking.about.com/od/windowsnetworking/f/cableunplugged.htm
    http://www.experts-exchange.com/Networking/Broadband/DSL_Cable/Q_20381405.html

  • Why does the new operating system not delete the moved files from their original location - it seems like an enormous waste of space, time and effort to clean up every file once you've moved it

    Why does the new operating system not delete the moved files from their original locations - it seems like an enormous waste of space, time and effort to clean up every file once you've moved it - also, when transferring large amounts of files it becomes a very large problem remembering which files were transferred and which not.

    You're going to need to be more specific, as I'm not quite sure I understand what you're talking about.
    If you're referring to copying from an external hard drive or flash drive, and you want to actually move files rather than copy them, you can hold down the option key to force it to do a "move" rather than a "copy." This is not new behavior, though... the Mac OS has worked this way as long as I can recall (and I've been using it since 1984).
    If you're having a problem with trying to move files from one place to another on a single drive causing them to be copied instead, that is likely because of some permissions issue preventing you from actually being able to move them.

  • I am a windows user that has converted to Mac and loving it but when I updated to Lion my wireless internet dongle would not work anymore and the Macbook Pro does not recognise the device at all so I am unable to reinstall it again. Any ideas

    I am a windows user that has converted to Mac and loving it but when I updated to Lion my wireless internet dongle would not work anymore and the Macbook Pro does not recognise the device at all so I am unable to reinstall it again. Any ideas would be greatly appreciated.

    Go to Finder > Preferences then select the General tab
    Make sure External disks is selected.

Maybe you are looking for