System-wide Call Handler

Thanks for the help in advance.
I'm trying to set up a message that will play when any outward--facing number is dialed, saying that our offices are closed. This message will be used only for a couple of weeks, so I don't want to do any major rerouting. Here's what I have tried: In Unity, I have a Call Handler with the extension 3199 set up, as well as a Forwarded Routing Rule to route any dialed number in 6000-6999 to the Call Handler and go straight to the greeting. The Call Handler is set with an alternate greeting that is enabled and it is set to . I can call 3199 from my office phone and get the greeting, but I cannot get it to work when calling any number in the 6000s. We have other Call Handlers and Forwarding Routing Rules configured for numbers in this range, so I don't want to change anything, just override it for a couple of weeks. The FRR is set to the highest order, so that should not be an issue.
I have looked into CTI Route Points, and that may be the solution, but I have not had much luck here, either. We have several CTIs that are already configured, but they were created to route calls for a single extension (i.e. calling a department), not dozens of extensions to 3199. I did create a CTI, but where I'm running into trouble is with associating DNs to it. If I add a DN that is already associated with a phone (for instance, mine), it gives me an error about shared lines. I don't want to change any lines, but I do need all the calls in the range 6000-6999 (or even 6500-6999) to be forwarded to 3199. Is there an easy way to do this? Is there a way to add dozens of active DNs to the CTI? Or, am I doing it all wrong? Thanks again.

David Rojas wrote:Hello Josh,If i understand the call flow is moreless the following:PSTN-> Main Number-> Forward All -> Call Handler Alternate greeting.You have set up:Forward Routing Rule w/condition of 6000-6999 range-> Send call to: Go directly to greetings ->-Call handler w/ extension 3199 which plays Alternate Greeting.Issue: When calling number is in the 6000s range it does not match the FRR which is the first match on the list.Probing questions:1- What condition are you using: Forwarding stationg, Calling Number, Called Number? Have you changed the Field option?2- If you use a wildcard such as star (*) do you still experience the same issue?Reading the help page of the FRR:"Note that you can add multiple Calling, Dialed, Forwarding Number conditions to a single routing rule to create more complex patterns (for example, all numbers in the range 2000-3999 plus all numbers greater than 5000). When a call matches all conditions for the rule, the call is routed as specified in Send Call To. # Note : Your integration may not support this option. "3- The rule the previous fact, have you tested with a rule that matches a single number?Regards,Dâ√!d
I do not believe the Call Flow listed is how it is configured. How would I look at the Call Flow to see exactly which number it is using as the Main Number. We have a Main Number that we advertise, but I do not know if that is the number that you are referencing. 3199 is just a DN that was created and has no purpose outside of the Call Handler. It is listed as a DN in Call Manager, but there is nothing set to forward to it in Call Manager.
To follow up on your other questions:
I am using Dialed Number. I have tried using Equals 6*, as well as In 6000-6999, with the same results. It is set to Send Call To Call Handler, Go Directly to Greetings. If I change the Forwarding Rule to match one single extension, it still does not forward and goes directly to the number I called; so, if I call 6934, it goes directly to 6934.

Similar Messages

Multiple Holiday Greetings in System Call Handler for UC 7.0

Hi All,
Is there any way to play individual Holiday Greetings in a System Call Handler in UC 7.0, i.e. XMas Day Greeting gets played on XMas Day and New Year's Greeting gets played on New Year
As far as Cisco's Doc's I havent seen anywhere this being specified.
Any helpful would be greatly appreciated.
Regards
Sam Wilson

Hi David,
Thanks for your prompt reply.
So does it mean I have to record the greetings before every holiday and set it, or there is a way, to fall it over to a different Call Handler each with unique Holiday Greetings.
Regards
Sam Wilson

Restore default greeting for system call handler

Unity Connection 8.0.3
There is a default system call handler called "Opening Greeting". A while ago I changed the greeting for that call handler without first saving a copy of the default greeting, and now I want to revert it to the default. How can I do that?
I think the default greeting said, "Hello, Cisco Unity Connection messaging system. From a touch tone telephone you may dial an extension at any time. For a directory of extensions press 4, otherwise, please hold to leave a general message".

Thanks. Unity Conn won't let me disable the standard greeting, but I can change it to "Callers Hear: System Default Greeting" instead of "My Personal Recording" which I have it set to now. I assume that's what you meant. Yes, I did try that, but then I hear, "sorry opening greeting is not available", so that's no good.

Hunt Group to System Call Handler

Hello Everyone,
Here's my problem, I manage the phones for two companies with two different phone schemes.
One company is fine but the other one is one I'm having trouble with,
When someone calls from the outside, it goes to a hunt group from the hunt group, they are to be forwarded to a System Call Handler with an extension.
The number forwards just fine but Unity Connection doesn't pick up the call it just keeps ringing. Is there anyway to track the call flow to see what extension is being dialed from the hunt group?
Versions of the Unity / CCM are 7.x and 7.x
Thanks in advance
-Kyle S.

Hi Kyle,
If you look on the Hunt Pilot page under the Forward settings you should see where the
call is supposed to Forward to. I would try this Tool from the great suite of Unity Tools to have a look
at the call flow if it is hitting Unity Connection;
Port Status Remote Monitor for Connection (rPSM)
http://www.ciscounitytools.com/Applications/CxN/PortStatusMonitorCUC7x/PortStatusMonitorCUC7x.html
Cheers!
Rob

How can I change the default message after System Call Handler transfer error?

Hi,
I'm using Unity Connection 9.1 and System Call Handlers to allow to join internal extensions (not reachable from the PSTN).
I succeeded but I would like to change the default message played when the extension dialed is not known. I tried with Error greetings but nothing changed.
Thanks for your help.
Regards,
Julien

Just tried this on my 9.1 and 10.0(1) servers and it worked fine.
I went to the opening greeting call handler, selected the "error" greeting, set the greeting to play my personal greeting (it defaults to the system generated greeting), recording "hey, you dialed the wrong number" and then called in and during the opening greeting I dialed "88" - I heard "hey, you dialed the wrong number" and then it repeated the opening greeting recording as it should.
the default action after playing your custom greeting in this case is to "restart greeting" - which is why the opening greeting plays again.
Not sure what you did in your testing with the error greeting - check to make sure you have it set to play your personal greeting instead of the default system greeting - since you can't disable the error greeting there's not a lot of other items I can think of to check.

Unity Connection 9.1 - System Call Handler Question

Hi,
I would like to use Unity Conncetion 9.1 to transfer calls to different extensions depending on the time of day:
For example; between 07.00 and 19.00, do not play a greeting and transfer to an extension (no mailbox), outside of the times above, again do not play a greeting and transfer to a different extension.
I have configured a CTI RP and set the extension to forward all to VM. The system call handler has an active schedule of 07.00-19.00 and has a standard transfer rule set up to transfer the calls to the relevant extension. I have also configured a closed transfer rule to transfer the call to the alternative extension after 19.00. The issue I have is that when dial the original extension I get the standard greeting. How do i get Unity to transfer the call without playing the greeting?
Thanks,
Phil

Hi Phil,
You need to:
1) enable the closed greeting
2) set the standard and closed greetings to "callers hear nothing"
3) in the standard and closed greetings, after the greeting, set it to call handler, select the same call handler, and set it to attempt transfer.
4) make sure the standard and closed transfer rules are enabled, set the respective extensions to transfer to, set them to release to switch, and uncheck "Play the 'Wait While I Transfer Your Call' Prompt" for both of them.

Calls not being directed tomy System Call Handler

I built a small auto attendant for an acquisition group of users moving to our head office, there are two toll free numbers as well as 4 DIDs, the carrier began forwarding these on move day to the pilot number of my AA.
The issue is that the toll free numbers work but the DIDs do not, they are routing to the UC default opening greeting for some reason rather than my AA call handler.
It's as though for some reason call manager is sending something different for these DIDs as opposed to the TFs and the UC doesn't know what to do with them so it sends to the default greeting.
Any ideas as to what may be happening would be greatly appreciated.
Regards,
Andrew Bardowell
Thomson Reuters

Not to worry everyone problem solved, apologies for this time waster.
The DIDs were forwarded as redirecting numbers instead of sending without as with the toll free numbers even though I specifically asked the carrier to check this on cut over night.
Consequently when the toll free numbers come in they work correctly while the DIDs do not. The TFs because the tech who worked on those programmed them to send just the called number (caller ID) and the calling number.
The tech working the DIDs sent a redirecting number as well (the original DID) which confused Unity Connection.

Hide a type of file System wide not just the extension*

Is it Possible & if So Howto hide a type of file System wide not just the extension*
Am trying to HIDE the Associated file for Photo Processing software in Finder, its a Specific file to the Program & holds the Raw data text Processed Info
. Would mean I would need to change each File individually
Is there a way/apple script?
Knowledge or experience would be Appreciated
Thanks

I followed these instructions and they work, but I also get errors. Here are two files in the directire, and the contents of ~/.profile, I called the function killextension:
I run the command to hide the PDF:
Note the two errors. Thank you very much, BTW. No more Dropbox attributes files!

UCCE 7.5 how to get BHCA and Average Call Handle time?

Hi everybody,
I'm trying to do an audit of the existing UCCE system.
Can someone please tell me how to get the BHCA and Average Call Handle time for agent?
I did a SQL query against the CallTypeHalfHour table for all the entering Call Type but I'm not sure that's the right BHCA.
Thanks in advance,
Best Regards,

Hi again Geoff,
Before closing this thread, I'm curious about your query against TCD for average handle time.
Here's mine using Skill_Group_Half_Hour
SELECT
    SUM(HandledCallsTalkTimeToHalf) AS TalkTime,
    SUM(IncomingCallsOnHoldTimeToHalf) AS HoldTime,
    SUM(CallsHandledToHalf) AS HandledCalls,
      AHT =
            CASE
            WHEN SUM(CallsHandledToHalf) > 0 THEN (SUM(HandledCallsTalkTimeToHalf) +SUM(IncomingCallsOnHoldTimeToHalf)) / SUM(CallsHandledToHalf)
            ELSE 0
            END
FROM t_Skill_Group_Half_Hour
WHERE DateTime between '02/01/11 00:00' and '02/28/11 23:30'
Besides, can you please also tell me how to get the Average Waiting Time (time before get answered by an agent) ?
Thank you in advance, Geoff,
Best Regards,

Preference Pane for system wide audio EQ? (2 yrs later)

I fully agree with the quoted message underneath.
*"Is there some sort of universal Equalizer I can apply to all my audio? A Preference Pane would be great! I listen to an internet radio client (XM Radio) that doesn't have any EQ control.*
*I know Audio Hijack can do this. But I'd rather not run a whole other application on top of the radio client just for EQ."* (original post from Feb 20, 2007 5:07 PM)
I can't believe that almost 2 years later, there is still no system wide equalizer in OS X, working always, like, while watching YouTube or whatever. Yes, I know there is Hear now, but both apps, Hear and Audio Hijack Pro, are expensive and overkill for the simple ability to change some equalizer settings. A preference pane would be much better.

I found a system wide EQ along with mixer and many other functions it works great its called Hear this is the web sight http://www.joesoft.com/products/hear.php

Setting up PLAR with Cisco Unity Connection Call Handler

This is a lab setup and Im doing it to learn. No customer involvement.
Setup
Analog phones - FXS Port - 2951 Router - FXS port - FXO Port - 2951 Router - CUCM 9 - UC 9
|------------PSTN Emulator-------------| |-----MGCP GW----------|
I have a CTI Route Point configured as DN 7000 and it has the default VM profile. The CTI RP is set to FWD All to VM.
The FXO port is set to PLAR to 7000.
When I dial from the PSTN analog phones through the FXO port, I hear the first ring, the FXO port answers, then I hear what sounds like the recorded message beginning to play. Immediately after, I hear the recorded message "You cannot be transferred to this number. Check the number and try again."
I dont do anything and within a second or two, I hear the recorded message for the system call handler start.
I did some more testing. I added an E1 trunk between the PSTN and the MGCP gateway. In the CUCM, I created another CTI Route Point with a DN that I could dial from my PSTN cloud. I also set that CTI Route point up to Call FWD all to VM.
When I dial using the E1 trunk, the call hits the system call handler as expected and I hear my recorded greeting (as expected).
However, calling through the FXS-FXO tie line consistently gets me the error message recording followed by my recorded greeting.
Im currently using loopstart on the tie line, though I have also tried ground start with no difference.
Any ideas?
Jeff

If I understand correctly, you want outside calls to go directly to the call handler but internal calls to ring whatever phone this extension is on.
If I am understanding correctly, then this will probably resolve it. For the purposes of the explanation I will assume that extension 1000 is the number in question:
Create a new partition, we'll just call it ToVM or something like that
Create a new CTI route point with extension 1000 and put it in the ToVM partition, forward all calls for this CTI route point to voicemail
If you don't have one already, create a calling search space for the voice gateway. Call it Gateway-CSS. This should have the same partitions that the gateway can normally call, but it should also have the ToVM partition and that partition should be HIGHER in the list than the partition that has the normal extension 1000 on it.
Apply Gateway-CSS to the gateway
Configure the normal extension 1000 (not in the ToVM partition) the way that you want it to work.
Now when external callers dial 1000 they will go to the call handler because that partition is higher in the CSS and the CTI Route point should be hit first. Internal callers will ring the phone (or whatever it is) because they only have access to the regular internal partition (and not ToVM) that 1000 is in.
This is all assuming that I understand you correctly!

Verizon system can't handle porting phone number from Straight Talk customers?

According to this discussion: Verizon system can't handle porting phone number from Straight Talk customers? If still true, then VW misses a huge business opportunity. Adjusting the sizing the account number to be wider is not a hard system adjustment task and have almost zero system ripple-effect impact (I am in IT works).
http://www.prepaidreviews.com/straighttalk.html
"Straight Talk makes it impossible to port an existing cell phone number from their operation to a competitor such as Verizon. To port my cell phone number I was told by Verizon to provide my ST account number. It was not listed on any account documents. After 45 minutes on hold, ST customer service told me it was the cell phone serial number. But that number was too long to insert into Verizon's system. After another hour long wait, ST directly told a Verizon rep that was the only account number. As a result, I had to abandon the cell phone number that I have had for nearly 10 years and get a new one. I will not be doing any business with ST in the future."

Ah ha! Okay, so I just need to be more patient in other words. I'm just glad nothing is wrong.
I did use the "erase all data and settings" option on the iPhone 6 menu because I wanted to go through the setup myself. I hope that didn't mess anything up.
Thank you!!

System wide lag

Hello guys, new member here.
I'd like you guys to help me out with something here.
I have a 13 inch, mid 2013 macbook pro with a 2.9 ghz i7, 8 gb RAM and a 750 gig HDD.
My problem is every now and then there is a system wide lag which freezes pretty much everything and audio playing from itunes also pauses during that time, it's quite frustrating as i've been searching for a fix since yesterday but havent found anything that can completely fix it. Usually there is only itunes, safari, mail and maybe one or two more things open at a time. I have checked my HDD for issues but there seem to be none. I suspect that this is related to the CPU since while I was using safari, a process called WindowServer would start using around 35% CPU, with nothing that intensive open on the browser
Note: This was ocurring much more frequently this morning but it has gotten a bit better now after I downloaded chrome and started using it instead of safari, I would, however, like to use safari instead.
Thanks in advance, I would be very thankful if someone could help me out with this, I have my exams coming up and I rely on my laptop for a lot of stuff.

I've got this problem on Macbook pro (mid 2010, 2,4ghz i5, 8gb ram, nvidia gt330m)
I don't think it ever happened before upgrading to mavericks. But now it's horrible!
It seems to only happen to me when I'm running unity3D, but does happen every minute or even more often. And the system freezes for anywhere between a second and 15 seconds...

"system-wide" proxy ?

I might not have the terminology quite right on this, I'm far from being an expert on the subject. That's why I'm turning to you guys !!!!!!!!!
I'm currently tethering my iPhone's connection via an app called PDANet which allows the computer to connect to a sort of 'wifi router' via an ad-hoc connection. While this doesn't quite work as they advertise it to (probably something I'm not doing that's getting auto 'automagically' in Windows/OS X), I am able to 'connect' to my iPhone and get offered an IP back when this app is running. I then launch the small socks server from the iPhone's term and voila I can use it to browse the tubes in firefox (with the proper settings).
Which is what brings me to my question: using this connection to my socks5 server running on my iPhone, I can resolve names and do http, at least. I'm just wondering, why this could be not set up as a 'system wide' service. In other words, all apps that want to connect to a certain IP/domain to a certain port, will do so as they always do. In other words why can't I set up a sort of service or daemon that uses this socks5 connection to the iPhone and sends back the data to the apps? As if my nameserver were the IP on the iPhone ? Or would I need something else running on the phone to provide that capability ?
Right now, when I dhcpcd, I get my IP from the iPhone, but nothing gets written in /etc/resolv.conf. I can only ping the iPhone's IP (which is the one I use to connect via proxy in firefox), and what I can only assume is my phone's IP on the 3G network, which starts with 10 (if that means anything to you experts.)....
Anyway, I'd like your thoughts on this..

delta24 wrote:Try creating a script in /etc/profile.d named proxy.sh having all the proxy config.
The behavier I want to achieve is that I can hot swap proxy and non proxy networks without restarting the browser. This works under gnome because chromium reads the proxy config from gconf which gets updated on network change but this doesn't work without gnome.
Most of the time I'm on networks without proxies. Only in university I need them. A simple switch to activate them when needed would be nice.

Fresh install, random 100% drive usage and system wide lag.

Hi there, i just fresh installed Win 8.1 after having the issue of a svchost thrashing 100% disk access for minutes at a time and lagging whole system inc mouse pointer to the point that apps and games start to crash and the issue has not gone away.
I had also had the issue on old pc using different drives.
This is the 4th system where ive seen this behaviour in Win 8 since launch and was wondering if there is a fix yet? It happens on my 2 pc, my mothers laptop and a friends desktop, all with different hardware, 2 factory installs and 2x fresh installs
from untouched iso's.
It happens randomly when nothing is running on pc or sometimes when gaming or using apps and makes the desktop unresponsive for minutes at a time and sometimes crashes apps with it due to the system wide lag. Even ctrl alt deleting can take several
minutes for the menu to appear or even start Task Manager.
Ive managed to catch 1/2 the issue with procmon but due to taking so long for apps to launch while the lag happens i can only get the last 1/2 of the trace which shows a mix between a svchost, explorer.exe and wmiprvse.exe thrashing the system to a standstill
while accessing almost every file and reg key on the disk to over a million events recorded in procmon.
IS there a fix for this or a way to check the procmon trace to see exactly what service or task is causing the thrashing? I think whatever it is is buggy/broken, running at realtime and is blocking anything else from using the system until its done,
which lags the system.
Surely even an overloaded drive wouldnt cause other apps or the mouse to lag/hang so badly to the point of crashing and even Xp or Win 7 wouldnt lag/hang the desktop due to a busy drive.

Gerg
In order to diagnose your problem you will need to download and install the below
Install the WPT (windows Performance Toolkit) http://social.technet.microsoft.com/wiki/contents/articles/4847.install-the-windows-performance-toolkit-wpt.aspx ,
When you have open an elevated command prompt and type the following
WPRUI.exe (which is the windows performance recorder) and check off the boxes for the following
First level triage, CPU usage, Disk IO. If you problem is not CPU or HD then check off the relevant box/s as well (for example networking or registry)
Let it run for 60 secs or more and save the file (it will show you where it is being saved and what the file is called
Zip the file and upload to us on Onedrive (or any file sharing service) and give us a link to it in your next post.
Wanikiya and Dyami--Team Zigzag

System-wide Call Handler

Similar Messages

Maybe you are looking for