System-wide Speed Dials

Is there a way to set up speed dials system-wide in UCM 5.1? We have about 25 remote locations and we want anybody in the company to be able to use speed dials (or something similar) to dial their main number. We don't want to add them to Active Directory because there are other apps pulling from there.

Depending on configuration, your phone can support several speed-dial features:
Speed-dial Numbers
Abbreviated Dialing
Fast Dials
http://cisco.com/en/US/products/hw/phones/ps379/products_user_guide_chapter09186a00806453c0.html#wp1009061

Similar Messages

Speed dialing in the digital voice system

I am having difficulty in setting up speed dialing in the digital voice system. I have followed Verizon directions, have spoken to numerous tech people, but once I program the speed dial codes and phone numbers, the system does not retain them in memory. When I enter the two digit code associated with the phone, I just get a dial tone. Help!!

you doing *75 or *74

Recommended CM System Speed Dials: Translations Patterns vs. DNs

Using Call Manager 8.6, I've successfully tested System Speed Dialing through using both Translation Patterns and as Directory Numbers (using the Call Forward Destination field). Since using Translation Patterns DOES NOT allow for a alpha display name to the user dialing the speed dial, I tested the DN approach. This offered about 1-2 seconds of a display on the phone so the user could get a confirmation that they dialed the speed dial they desired. Is there any reason to not use DNs as system speed dials? Do they use up resources in some way that Translation Patterns do not? I'm just wondering if there is a compelling reason to not use the DN approach. Otherwise, I think this will be customer's avenue to using system speed dials as it provides that 1-2 second of alpha display of the speed dials name. Thank you. Dan

No, they do not use any more resources. The only reason I am hesitant of using them is that unassigned DNs can be accidentally purged out by unaware administrator, as one can simply find unassigned DNs thinking those are old discarded ones and click to delete them. If you have a process in place that prevents this there is absolutely no down side.
HTH,
Chris

Unable to Edit Number Locked In Speed Dial Position

All my Speed Dial listings were ported over to a new 8900 from an 8300. I also changed carriers. Coincidentally, I had my old carrier's voice mail access number programmed into the "W" position in the Speed Dial list on the 8300. That number is now in the "W" position on the 8900, which is the default position for the voice mail access number on the 8900. I am unable to delete the old number so I can enter my new carrier's voice mail access number. There is no EDIT option for that position, but the EDIT option is available for all other numbers in my Speed dial list EXCEPT the position Q, which has a default feature "Change Profile to Vibrate." It would be nice to know how to delete that feature, too. Can anyone help?

There are three keys preassigned
A Lock System
Q Change to vibrate
W Voicemail
You can change this ones, but if for any reason you reset the device, the preassigned keys come back
To change this go to phone, press menu, view speed dial list, go to the A (for ex), press enter, and choose the contact you want.
Remember to create a new contact called Voicemail or something like that to change the Voicemail Key.
If I help you with any inquire, thank you for click kudos in my post.
If your issue has been solved, please mark the post was solved.

Speed dial only has one icon, to open up the windows. Another used to be on the other end of the tool bar for entering websites into the windows. Also do not know how to form another group.

I have just downloaded Firefox into a new computer. The firefox I had in my old computer had one (9 pt) icon at one end that brought up the speed 9 speed dial windows. It also had another similar icon at the other end of the tool bar that you could click on and place a website you were looking at into a particular window. This add on does not have that feature, which makes it very hard to make entries into the windows.
Also I have not found the way to add other groups of windows as I had before. I could even label them in categories. What to do?
My Computer is an HP p6653w and my default browser is Firefox 3.6
My operating system is windows 7.

Hi,http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03149924&cc=uk&dlc=en&lc=en#N89
First, I am sorry to see your experience, however be aware that this forum is a peer-to-peer community and not a direct contact with HP.
To clarify, the product specification do list the ink cartridges regionalization, the specifications itself reffer to HP Suresupply to locate the ink cartridges for your region, as well as the following document which clearly state that information:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03239171&tmp_task=prodinfoCategory&cc=uk&dlc=en...
Firs be sure to have the latest software installed prior contacting HP support, which should be listed as 28
You may find that information listed in the following document (Check the How can I tell which driver version I have? section), if you have any older version be sure to uninstall it and install the latest software, as listed within the same document:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03149924&cc=uk&dlc=en&lc=en#N89
If you need, the latest software can be found below:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-108821-3&cc=uk&dlc=en&lc=en...
Next ensure you have any of the 564 ink cartridges, once the printer being reset it require all the 4 ink cartridges to work
Finally check the private messages I sent you prior contacting HP support , the envelope icon at the top-right part of that screen.
The ensure you use the correct contact details lease double chekc it below:
http://www8.hp.com/us/en/contact-hp/phone-assist.html#section1
Regards,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Anyone else find that Speed Dial fails to work after reinstalling version 3.6?

''locking as a duplicate - https://support.mozilla.com/en-US/questions/810782''
Since I cannot go without the McAfee Site advisor, I ran a system restore. THAT did not work, Firefox won't start. So, I reinstalled 3.6. That got Site Advisor to work again, only to lose the MOST important add on I had Speed Dial. Its says it is there, and I can tell it what options to use, but IT WILL NO LONGER WORK WITH FIREFOX. I tried uninstalling and reinstalling the add on. THAT DID NOT WORK. Stupidest thing I ever did was trust this UPDATE! It has RUINED my browser's BEST add ons.

mkarr, I recommend to use the PC Suite because it creates a modem once which can be re-used. Did that help?

System wide mini malfunctions

I have a mac mini i5 (2.3 GHz mid 2012)
OS X 10.8.3
I have multiple log in accounts (main, kids etc)
I upgraded to Mountain Lion a few months ago and just now realized there are system wide malfunctions going on.
Prior to upgrade, I backed up, wiped the drive clean, then installed Lion and a week later upgraded to Mountain Lion.
Problems:
Loging into account C: I am greeted with a "Enter iCloud ID or create a new one" then another screen saying "Enjoy your computer." I have entered the info at this prompt and am greeted by the same prompt the next time I log in. I have had an icloud account for months and this info is entered in the Pref Settings as well. It is as if the computer is not remebering the info I am entering.
Login items that have been turned off, will be turned back on after login or reboot.
Account A- Finder - if I customize the side bar of the finder window, it will accept the changes for my current session, but if I log out or restart, the customization is reverted back to the default
Mail - opens two window upon launching, it will not remember my toolbar customization (similar to the finder side bar problem above)
will not remember changes to pref settings like "move junk mail to trash"
Account B Safari will not remember auto log in info.
I've tried repairing disk permissions
I've gotten advice to delete various .plists and data states.
None of this has helped. I feel like I'm working on a computer in the public library. Urrggh!

Back up all data. Don't continue unless you're sure you can restore from a backup, even if you're unable to log in.
This procedure will unlock all your user files (not system files) and reset their ownership and access-control lists to the default. If you've set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it.
Step 1
If you have more than one user account, and the one in question is not an administrator account, then temporarily promote it to administrator status in the Users & Groups preference pane. To do that, unlock the preference pane using the credentials of an administrator, check the box marked Allow user to administer this computer, then reboot. You can demote the problem account back to standard status when this step has been completed.
Triple-click the following line to select it. Copy the selected text to the Clipboard (command-C):
{ sudo chflags -R nouchg,nouappnd ~ $TMPDIR.. ; sudo chown -R $UID:staff ~ $_ ; sudo chmod -R u+rwX ~ $_ ; chmod -R -N ~ $_ ; } 2> /dev/null
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V). You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning to be careful. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The command will take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear, then quit Terminal.
Step 2 (optional)
Step 1 should give you usable permissions in your home folder. This step will restore special attributes set by OS X on some user folders to protect them from unintended deletion or renaming. You can skip this step if you don't consider that protection to be necessary, and if everything is working as expected after step 1.
Boot into Recovery by holding down the key combination command-R at startup. Release the keys when you see a gray screen with a spinning dial.
When the OS X Utilities screen appears, select
Utilities ▹ Terminal
from the menu bar. A Terminal window will open.
In the Terminal window, type this:
res
Press the tab key. The partial command you typed will automatically be completed to this:
resetpassword
Press return. A Reset Password window will open. You’re not going to reset a password.
Select your boot volume ("Macintosh HD," unless you gave it a different name) if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Under Reset Home Directory Permissions and ACLs, click the Reset button.
Select
 ▹ Restart
from the menu bar.

Odd speed dial setup issue

I am getting an odd speed dial setup issue. Here are the steps:
1. Open speed dial setup screen
2. Tap an open slot
3. Search for a contact using the keyboard
4. Click on the contact to select it
If I do it that way, I am taken back to the speed dial setup screen, but the contact is NOT added to the slot.
On the other hand, if in step #3, I just scroll down the list of contacts and select a contact, it works just fine. Seems to be an issue with the search function. Anyone else have this problem?
Android v2.2
System Version.2.3.15.MB810.Verizon.en.US

The steps that you are taking correct for setting up the speed dial. I have provided a link for additional information.
Click here http://motorola-global-portal.custhelp.com/app/answers/detail/a_id/48578/kw/speed+dial/p/30,6720,7500,/session/L3NpZC9zNEEzbVFhaw=

Touch Tones via speed dial work now

The 3G iPhone (or the 2.0 software) seems to have fixed the issue where you could not program your speed dial to automatically enter your mailbox number and password on your voicemail system (I use AUDIX at work). With the original iPhone, the tones were too long to be recognized and I had to type the numbers in manually each time.
Yes!

Huh, we have Audix too, and I have had mine working automatically since I got the first iPhone a year ago... I just had to play with how long of a pause to make before starting with the tones. It has always worked with Vonage as well...

How do I add the second set of urls to speed dial

I have filled in all nine boxes in speed dial. I need to know how to set up second dial for second nine urls.

MAC filtering is NO security measure against anyone who wants to get into your system for malicious reasons.
That said, the MAC address list is kept in your router settings. Type the router's IP address into a browser to access.
Let me know what brand/model router and I can help.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Speed dials

Hi all experts.
I have 2 questions kindly take time to answer them
1) All of you know, how we configure speed dials in mobile phones. We configure them on normal keypad, press the key 2 (for example) for few seconds, and the speed dial number gets dialed. Can we do the same in CUCM7.x or 8.x ?
2) With reference to the above question, what approach should i take to find the answer on my own ?, i downloaded cucm 7.0 administration guide and feature guide, but it hasnt shown how to configure speed dials :-(, how do you guys search for a specific feature ?
Thanks

I am going to assume by "mobile phones" you mean the 7921G or 7925G. Speed dials are a feature of that model and a referenced in the phone's documentation, not UCM. Cisco UCM has no feature called speed dials which is why you cannot find documentation on it. The closest that UCM comes is the speed dial line button type. The UCM-level features that are equivalent are :
Abbreviated dialing. You press a one- or two-digit index number representing the number you want to dial and then the AbbrDial soft key. This is a per-device setting (i.e. not global). These are configured by the user on the device using /ccmuser or the adminstrator by assigning a Speed Dial line button type to a device. If assigned to a free button it will act as a one-button speed dial. If you associate it beyond the available buttons, the index number shown to the left becomes its Abbreviated Dialing index.
Fast dials. These are Personal Address Book entries that you have configured as a fast dial through /ccmuser. They are accessed and dialed through the Personal Address Book service. These are per-user settings.
Translation patterns. Many other PBX systems have an explicit concept called Speed Dials that are globally available to all users. UCM doesn't bother with that feature because Translation Patterns can do that instead. Cisco just doesn't point this out very well. You can create a translation pattern that translates FROM anything TO anything. For example: *411 translates to +16085532447.

Using speed dial button as paging on provisioned 525g's

Hello everyone!
We recently switched to a hosted phone provider with provisoning for our 2 SPA525G2's but still want to maintain an internal paging function between them using a speed dial button. For less confusion, lets call in ex5.
I have successfully created a dial plan and am able to dial *96 + extension number to activate the paging system. My objective is to just hit ex5 and having it automatically activate the paging function.
I feel I'm very close but need help with the last step.
Please help!

Thanks for your response!
Question, wouldn't that use my provisioned phone system still? How could I directly dial the LAN side IP?
I currently have (<5:[email protected]:5060>S0|xx.<:@192.168.0.104:5061>) which allows me to call the other phone but not page it.

SPEED DIALS = unable to find specified object

Hi All,
Glad to join this lovely forum.
I'm facing this message when trying to use speed dials !!
System
unable to find specified object
Any hints ?
Thanks in advance
Model: 9300i

Hi,
Try to update the firmware version (contact ur nearest Nokia Service Center). Please take a full backup before doing upgrade. After firmware update please restore only the contacts (partial restoring recommended). If u do a full restore the probelm (error) may occure again.
BR,
sanju

Problem with speed dial

Hello,
Just picked up my iPhone 5 and noticed an existing speed dial from my favorites is not working properly.
My speed dial contains a 10 digit phone number, a 10 digit access code, and a 5 digit password all separated by commas. When activated from my favorites the phone number dials perfectly but the 10 digit access code, and a 5 digit password dials very slowly and my system does not recognize the entries.
I deleted the favorite from my contacts and re entered it with the same result. Even re installed ios 6 but no help.
This feature worked perfectly on my iphone 4.
Any ideas your help would be greatly appreciated.

All,
Just went to a Verizon store and conducted a test. I used an iPhone 4S and a iPhone 5 both running ios 6. The 4s dialed a programmed speed dial containing an access phone number, a access number and a password. It worked flawlessly. Ran the same series of numbers on the iPhone 5 (not mine) and it failed miserably.
I hope that apple can provide a fix for us speed dialers. It's quite annoying.
Thanks

File Type Associations Do Not Stick System-Wide CS4

When I set File Type Associations for PSD, Tiff, DNG and Jpeg fles in Bridge CS4 so that my files will open in PS CS3 (and insure that the same file associations apply in Bridge CS3), this works as it should from within CS4 and CS3, but it is impossible to introduce a system-wide change in Mac OS 10.5.5 via File-Info. It always reverts to CS4 for these file types, if I try to 'modify all'. The same thing happened when I upgraded from CS2 to CS3.

If File Type Associations are set properly in the Bridge preferences, the default setting can be made to open files in PS CS3, with CS4 installed. This works from within CS3 and CS4. However, it sometimes happens that one is in the Finder, and the default remains PS CS4, however much one tries (via File-Get Info) to modify the default system-wide settings so that these files open in CS3. In any event, a bit invasive. Of course, if I could get comfortable with the Adjustment Layer Panels, all this would be unnecessary, but for the moment, there appear to be too many clicks, and it is going to take some time, so I don't want to burn bridges. Perhaps there is also some ambiguity in my mind as to what the pointing finger in the new Curves dialogue box, much like a tolling bell, is trying to tell me.
But thanks, once again Anne, for your good-natured help.

System-wide Speed Dials

Similar Messages

Maybe you are looking for