Systemcopy: problems with different schema users

Hi,
I'm working on a systemcopy of an abap system with java addin. It is an Netweaver 7.01 SR1 installation.
The oracle version is 10.2.0.4.
The following problem occoured:
The source system had the ID P13. Therefore the schema users were SAPP13 and SAPP13DB.
The traget system has the ID P14. Therefore normally the schema users are SAP14 and SAPP14DB.
I read oss note 534765 I changed the dbs_ora_schema to the old ABAP schema, and the installtion of the abap went trough.
But now it stopps in the java part "Run Java migration tool kit".
The installtion wants to get information from the table SAPP14DB.j2ee_config which is not existent, but the table SAPP13DB.j2ee_config is existent.
I tried to change the scheme name in the keydb.xml and the inifile.xml in the installtion directory, and restaret the installation, but it still does not work.
Has anyone an idea how ti solve it?
Regards
Ulrike

Hi Ashish,
here is the log file runJmt.log:
com.sap.engine.frame.core.configuration.ConfigurationException: Error occurred d
uring DB access: cluster_data/dispatcher,
        at com.sap.engine.core.configuration.impl.persistence.rdbms.PersistenceH
andler.readConfig(PersistenceHandler.java:108)
        at com.sap.engine.core.configuration.impl.cache.CachedConfiguration.<ini
t>(CachedConfiguration.java:62)
        at com.sap.engine.core.configuration.impl.cache.ConfigurationCache.getCa
chedConfiguration(ConfigurationCache.java:848)
        at com.sap.engine.core.configuration.impl.cache.ConfigurationCache.getCa
chedConfiguration(ConfigurationCache.java:882)
        at com.sap.engine.core.configuration.impl.cache.ConfigurationCache.openC
onfiguration(ConfigurationCache.java:748)
        at com.sap.engine.core.configuration.impl.ConfigurationHandlerImpl.openC
onfiguration(ConfigurationHandlerImpl.java:734)
        at com.sap.engine.core.configuration.impl.ConfigurationHandlerImpl.openC
onfiguration(ConfigurationHandlerImpl.java:693)
        at com.sap.sdt.serviceframework630.impl.ClusterDataImpl._getSourceIds0(C
lusterDataImpl.java:54)
        at com.sap.sdt.serviceframework630.impl.ClusterDataImpl.getDispatcherIds
(ClusterDataImpl.java:91)
        at com.sap.sdt.serviceframework630.impl.ClusterDataImpl.createIdMapping(
ClusterDataImpl.java:172)
        at com.sap.sdt.jmt.migrationtool.MigrationToolImport.prepareSwitch(Migra
tionToolImport.java:1129)
        at com.sap.sdt.jmt.migrationtool.MigrationToolImport.startTool(MigrationToolImport.java:403)
        at com.sap.sdt.jmt.migrationtool.MigrationToolImport.main(MigrationToolImport.java:1561)
        at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
        at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:88)
        at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:61)
        at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:60)
        at java.lang.reflect.Method.invoke(Method.java:391)
        at com.sap.engine.offline.OfflineToolStart.main(OfflineToolStart.java:81)
Caused by: java.sql.SQLException: ORA-00942: table or view does not exist
        at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:112)
        at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:331)
        at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:288)
        at oracle.jdbc.driver.T4C8Oall.receive(T4C8Oall.java:745)
        at oracle.jdbc.driver.T4CPreparedStatement.doOall8(T4CPreparedStatement.java:219)
        at oracle.jdbc.driver.T4CPreparedStatement.executeForDescribe(T4CPreparedStatement.java:813)
        at oracle.jdbc.driver.OracleStatement.executeMaybeDescribe(OracleStatement.java:1049)
        at oracle.jdbc.driver.T4CPreparedStatement.executeMaybeDescribe(T4CPreparedStatement.java:85
4)
        at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1154)
        at oracle.jdbc.driver.OraclePreparedStatement.executeInternal(OraclePreparedStatement.java:3
370)
        at oracle.jdbc.driver.OraclePreparedStatement.executeQuery(OraclePreparedStatement.java:3415
        at com.sap.sql.jdbc.basic.BasicPreparedStatement.executeQuery(BasicPreparedStatement.java:97
        at com.sap.sql.jdbc.direct.DirectPreparedStatement.executeQuery(DirectPreparedStatement.java
:281)
        at com.sap.sql.jdbc.direct.DirectPreparedStatement.executeQuery(DirectPreparedStatement.java
:248)
        at com.sap.engine.core.configuration.impl.persistence.rdbms.DBAccessDefault.getConfiguration
(DBAccessDefault.java:578)
        at com.sap.engine.core.configuration.impl.persistence.rdbms.PersistenceHandler.readConfig(Pe
rsistenceHandler.java:102)
        ... 18 more
com.sap.engine.frame.core.configuration.ConfigurationException: Error occurred during DB access: clu
ster_data/dispatcher,
        at com.sap.engine.core.configuration.impl.persistence.rdbms.PersistenceHandler.readConfig(Pe
rsistenceHandler.java:108)
        at com.sap.engine.core.configuration.impl.cache.CachedConfiguration.<init>(CachedConfigurati
on.java:62)
        at com.sap.engine.core.configuration.impl.cache.ConfigurationCache.getCachedConfiguration(Co
nfigurationCache.java:848)
        at com.sap.engine.core.configuration.impl.cache.ConfigurationCache.getCachedConfiguration(Co
nfigurationCache.java:882)
        at com.sap.engine.core.configuration.impl.cache.ConfigurationCache.openConfiguration(Configu
rationCache.java:748)
        at com.sap.engine.core.configuration.impl.ConfigurationHandlerImpl.openConfiguration(Configu
rationHandlerImpl.java:734)
        at com.sap.engine.core.configuration.impl.ConfigurationHandlerImpl.openConfiguration(Configu
rationHandlerImpl.java:693)
        at com.sap.sdt.serviceframework630.impl.ClusterDataImpl._getSourceIds0(ClusterDataImpl.java:
54)
        at com.sap.sdt.serviceframework630.impl.ClusterDataImpl.getDispatcherIds(ClusterDataImpl.jav
a:91)
        at com.sap.sdt.serviceframework630.impl.ClusterDataImpl.createIdMapping(ClusterDataImpl.java
:172)
        at com.sap.sdt.jmt.migrationtool.MigrationToolImport.prepareSwitch(MigrationToolImport.java:
1129)
        at com.sap.sdt.jmt.migrationtool.MigrationToolImport.startTool(MigrationToolImport.java:403)
        at com.sap.sdt.jmt.migrationtool.MigrationToolImport.main(MigrationToolImport.java:1561)
        at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
        at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:88)
        at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:61)
        at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:60)
        at java.lang.reflect.Method.invoke(Method.java:391)
        at com.sap.engine.offline.OfflineToolStart.main(OfflineToolStart.java:81)
Caused by: java.sql.SQLException: ORA-00942: table or view does not exist
        at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:112)
        at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:331)
        at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:288)
        at oracle.jdbc.driver.T4C8Oall.receive(T4C8Oall.java:745)
        at oracle.jdbc.driver.T4CPreparedStatement.doOall8(T4CPreparedStatement.java:219)
        at oracle.jdbc.driver.T4CPreparedStatement.executeForDescribe(T4CPreparedStatement.java:813)
        at oracle.jdbc.driver.OracleStatement.executeMaybeDescribe(OracleStatement.java:1049)
        at oracle.jdbc.driver.T4CPreparedStatement.executeMaybeDescribe(T4CPreparedStatement.java:85
4)
        at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1154)
        at oracle.jdbc.driver.OraclePreparedStatement.executeInternal(OraclePreparedStatement.java:3
370)
        at oracle.jdbc.driver.OraclePreparedStatement.executeQuery(OraclePreparedStatement.java:3415
        at com.sap.sql.jdbc.basic.BasicPreparedStatement.executeQuery(BasicPreparedStatement.java:97
        at com.sap.sql.jdbc.direct.DirectPreparedStatement.executeQuery(DirectPreparedStatement.java
:281)
        at com.sap.sql.jdbc.direct.DirectPreparedStatement.executeQuery(DirectPreparedStatement.java
:248)
        at com.sap.engine.core.configuration.impl.persistence.rdbms.DBAccessDefault.getConfiguration
(DBAccessDefault.java:578)
        at com.sap.engine.core.configuration.impl.persistence.rdbms.PersistenceHandler.readConfig(Pe
rsistenceHandler.java:102)
        ... 18 more
Error executing Migration Tool Import
java.lang.IllegalArgumentException
        at com.sap.sdt.serviceframework630.impl.ClusterDataImpl.createBoxNumberMapping(ClusterDataIm
pl.java:137)
        at com.sap.sdt.serviceframework630.impl.ClusterDataImpl.createIdMapping(ClusterDataImpl.java
:172)
        at com.sap.sdt.jmt.migrationtool.MigrationToolImport.prepareSwitch(MigrationToolImport.java:
1129)
        at com.sap.sdt.jmt.migrationtool.MigrationToolImport.startTool(MigrationToolImport.java:403)
        at com.sap.sdt.jmt.migrationtool.MigrationToolImport.main(MigrationToolImport.java:1561)
        at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
        at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:88)
        at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:61)
        at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:60)
        at java.lang.reflect.Method.invoke(Method.java:391)
        at com.sap.engine.offline.OfflineToolStart.main(OfflineToolStart.java:81)
Additiononal information are int the log file /tmp/sapinst_instdir/NW701/LM/COPY/ORA/SYSTEM/CENTRAL/AS/jmt/
system.log
#1.5^H#C00086F783A30000000000150C720C72000482F1A7986410#1269874317354#/System/Database/sql/jdbc/direct##com.sap.sql.jdbc.direct.DirectPreparedStatement#######Thread[main,5,main]##0#0#Error#1#com.sap.sql.jdbc.direct.DirectPreparedStatement#Java#com.sap.sql_0003#com.sap.sql.log.OpenSQLResourceBundle#SQL error occurred on connection : code={0,number,integer}, state="", message="";
SQL statement is "".#5#942#42000#ORA-00942: table or view does not exist
#fmgp14:P14:SAPP14DB#SELECT "CPATH","CID","PARENTCID","CACHEMODE","CTYPE" FROM "J2EE_CONFIG" WHERE "PATHHASH" = ?#
#1.5^H#C00086F783A30000000000160C720C72000482F1A79867F8#1269874317355#/System/Server##com.sap.engine.core.configuration#######Thread[main,5,main]##0#0#Error#1#com.sap.engine.core.configuration#Plain###ORA-00942: table or view does not exist
Regards
Ulrike

Similar Messages

Store access problems with different Mac user accounts

Hi,
My daughters account cannot connect to the iTunes store ONLY when she is logged into her user account on our iMac.
When logged into my user account she is able to connect to the store.
I can connect to the store if I log into my iTunes account when I am logged in her iMac user account.
Hope you are still with me!
I am running Mac OS X 10.5.2 & iTunes 7.6.2 (9)
The computers firewall settings are 'allow all incoming connections'.
There have been no changes to our netgear router.
As stated there is no ISP issue here as she can connect on other Mac user accounts and I can connect on her Mac user account.
I have deleted her .com.apple.iTunes.secure.plist
The error message -50 takes about 5 minutes to arrive after the 'accessing iTunes store' eventually stops. We have also had error -4 on one occasion.
It is possible to view her account details but when clicking on the iTunes store icon in iTunes it doesn't connect to the store.
I have deleted the existing iTunes file and downloaded a new iTunes file. I have changed the purchasing from shopping cart to one click in iTunes Preferences.
And I have emailed apple. Their reply hasn't been of help as yet.
Hopefully someone will have some ideas as to what to do next!
Regards, Jon

I've had another reply back from Apple which I am posting should anyone else have similar problems. Sadly it is a very disappointing and I think rather strange response.
+I understand that you are still unable to sign into your accouint on your other computer. I sincerely apologize for any frustration this may have caused you and I would be happy to assist you today.+
+I have looked further into this issue and your issue seems to be caused by a technical issue, which is out of my scope of support. The iTunes Customer Support answers questions about iTunes Store billing and accounts, downloading purchases from the iTunes Store, and iTunes Store content.+
+However, Apple also offers support for the .Mac services. Please visit the .Mac Support website to review the information provided or submit a question to the .Mac Support team:+
+http://www.apple.com/support/dotmac+
+In the future, if you need assistance with the iTunes Store, please don't hesitate to contact us again. I hope that you continue to enjoy using the iTunes Store. Thank you for being a loyal iTunes customer.+
Sincerely,
So my question is Who answers technical iTunes support from Apple?
Don't get me wrong, I love Apple - their design, the fact my computer does 'just work' and the way I now listen to music. Just a bit surprised by that reply.
Anyway fortunately I solved my problem and I hope this thread helps anyone else.
Jon

I have a problem with ALV Grid User Command?

Hi Experts,
I have a problem with ALV GRID User Command.
I am calling TCODE IW33 (Order Display) from the ALV output at first time by selecting an order. But, User command is calling IW33 Initial screen with blank value of order. Even I checked in debugging the value what I selected is passing properly, but once that screen (IW33 Initial) displays, value doesn't appear. Then, Manually, I created another session and gone to TCODE IW33 and displayed an order. After that I came out from that order. Then again run my ALV program and selected another order, now order is displaying, but not what I selected current order instead of displaying previous order what I just displayed manually. If I selected any other order, system will display the same order what I dislayed manually.
Here is my code.
FORM user_command_alv USING u_ucomm TYPE sy-ucomm
                       us_self_field TYPE slis_selfield.
CASE u_ucomm.
WHEN '&IC1'.
READ TABLE it_final INDEX us_self_field-tabindex INTO wa_final.
        WHEN 'ORDER'.
          IF NOT wa_final-order IS INITIAL.
            SET PARAMETER ID 'COK' FIELD wa_final-order.
            CALL TRANSACTION 'IW33' AND SKIP FIRST SCREEN.
          ENDIF.
endform.
PARAMETER ID 'COK' also the standard one.
Could you please help me out, Where I did wrong?
If I select any order, that order only should display.
Thanks in advance.
Regards,
Sarayu.
Code Formatted by: Alvaro Tejada Galindo on Jan 8, 2009 2:33 PM

hi,
Please check it once the Paramater ID is 'ANR' for IW33 order number.
Hope this may help.
Regards,
Sravanthi

Problem with creating new user in portal = portlet is not visible

Hi,
I've got a problem with creating new users in portal. In the Administer tab of the builder is the user portlet not visible.
How can I make this portlet visible?
Please Help
thank you...
Gilbert

Hi..my problem slightly similar.
I created one new user, and didn't select anything from "Public Groups Assignment" and "Privilege Assignment" for him.
I expect the user will be a public user.
But, when he try to logged in the portal,
He cannot see all the PORTLETS related to database values..
All he can see just LINKS -that all in my portal right now beside the report from database that the user cannot see :)
So, what did i do wrong?
Plz Advise, and thanks.

Problem with non iPhone users receiving my text sent pictures. Can I make them smaller files?

Problem with non iPhone users receiving my text sent pictures. Can I make them smaller files? I know that is possible for email sent pics.

My bad, It was a Verizon problem. When they upgraded my phone they were supposed to remove all blocks on messaging . Found out they did not do this. All messaging now works. Thanks for listening.

Problem with database schema objects in the entity object wizard

Hi All,
When creating a new entity object, I am facing a problem with database schema objects in the entity object wizard, database schema objects (check boxes for tables,synonyms...) are disabled. Actually I am using a synonym but I am not able to select the synonym check box.
Can any of you folks tell me how to enable the database schema objects (check boxes for tables,synonyms...).
Thanks in Advance.
Raja.M

Make sure your using rite version of jdeveloper..
Make sure your using apps schema and check whether your able perform DML operations in the schema vis sql developer.
--Prasanna

I am facing a new problem with xml schema, plz help me

Hi @,
I am facing a problem with xml schema validation. Below is my code.
public void initialize(String cfgFileName) {
try {
try {
DOMParserWrapper parser = (DOMParserWrapper)Class.forName("dom.wrappers.DOMParser").newInstance();
parser.setFeature( "http://apache.org/xml/features/dom/defer-node-expansion",true );
parser.setFeature( "http://xml.org/sax/features/validation",true);
parser.setFeature( "http://xml.org/sax/features/namespaces",true );
parser.setFeature( "http://apache.org/xml/features/validation/schema",true );
parser.setFeature( "http://apache.org/xml/features/validation/schema-full-checking",true );
Document document = parser.parse(cfgFileName);
System.out.println("Vijay .. code .. damar\n");
}catch (org.xml.sax.SAXParseException spe) {
} catch (org.xml.sax.SAXNotRecognizedException ex ){
} catch (org.xml.sax.SAXNotSupportedException ex ){
} catch (org.xml.sax.SAXException se) {
if (se.getException() != null)
se.getException().printStackTrace(System.err);
else
se.printStackTrace(System.err);
}catch (Exception e) {
System.out.println("Caught unknown exception : \n");
e.printStackTrace(System.err);
System.out.println("Vijay .. code .. success\n");
DocumentBuilderFactory docBuilderFactory = DocumentBuilderFactory.newInstance();
DocumentBuilder docBuilder = docBuilderFactory.newDocumentBuilder();
//docBuilder.setErrorHandler(myErrorHandler);
cfg = docBuilder.parse(new File(cfgFileName));
cfg .getDocumentElement ().normalize ();
} catch (Exception e) {
e.printStackTrace();
In the above code I am parsing the xml file and i am doing schema validation. Schema validation is proper and it is validating correctly. Only problem is that, It is validating and showing error correctly correctly but it is not catching that error.
For clear understanding I am printing one statement before parsing and after parsing.
SYSTEM.OUT.PRINTLN("Vijay .. code .. damar\n") this is before parsing
SYSTEM.OUT.PRINTLN("Vijay .. code .. success\n") this is after parsing
Here what is happening means, It is validating correctly and showing error :
[Error] nw_layout-new.xml:800:97: Datatype error: Value 'y' does not match regular expression facet 'yes|no'..
Vijay .. code .. damar
Vijay .. code .. success
Here it is showing error and still continueing not catching.
Plz give solution for this.
Thanks
vijay K

Hello dipthebe,
Check out the articles below go through troubleshooting steps for your iPhone when the screen is unresponsive. You may want to try and restore your iPhone as a new device and then test out what happens when you miss a call to see if the issue is still present afterwards.
iPhone, iPad, iPod touch: Troubleshooting touchscreen response
http://support.apple.com/kb/ts1827
Use iTunes to restore your iOS device to factory settings
http://support.apple.com/kb/HT1414
Regards,
-Norm G.

After Redirected Restore with different schema problems with db13

Hello, we made a redirected restore. We have different schema between production and quality system.
According to note 713524 we made the following changes:
create db connect user from the source system in the target system (unix user, sap<sid>)
set parameter dbs/db6/schema=sap<sid> in the instance profile
set dbs_db6_schema = sap<sid> in the environment for <sid>adm and db2<sid> (dbenv...)
add user sap<sid> into /sapmnt/<SID>/global/dscdb6.conf and set password with dscdb6up sap<sid> <password>
The system is now up and running. But transaction db13 is not working
SQL0443N Routine "*SHOT_DBM" (specific name "")
has returned an error SQLSTATE with diagnostic
text "SQL1092 Reason code or token: SAPR3
". SQLSTATE=38553
Regards,
Alexander

Hi Alexander
sorry , forget the grants , they should come from the source system .
If you have multiple App-Servers , did you perform the above mentioned action in all affected profiles and environments of your Q-System ?
Please check , if you can limit this issue to an separate App-Server or to all App-Servers .
Best regards
dirk

Unexpected problem with authorization scheme of type plsql function

Hi,
I have created one authorization scheme of type plsql function returning boolean. Authorization scheme is for pages only. p2_user_priviledge is a textbox on home page which extract privilege (list of pagenos) for login user from database. Home page has no authorization required. AUTHORIZATION SCHEME always returns false. I am not able to trace problem in my code. same code works fine for a textbox's default returning 'c'.
----- CODE FOR AUTHORIZATION SCHEME------------------------------------------------------------
declare
pageid varchar2(10);
privilege varchar2(300);
c number(3);
begin
pageid := ':P'||to_char(:app_page_id)||':' ; ---Pageno get stored in format *:P2:*
privilege := trim(:p2_user_priviledge); ++------Contain list of privilege like :P2:P13:P67:P23: etc+++ select instr(privilege,pageid) into c from dual;
if c>0 then
return true;
else
return false;
end if;
end;
One more problem is again related to authorization scheme.
I created one application and one authorization scheme (auth_aug) which worked finely. Then after some days i added 10 more pages to same application, But now autho_aug was always returning false for new pages. So i copied code from 'autho_aug' to new scheme 'autho_sept', & it worked for new pages. I don't understand if code is same for both scheme, why required to use two different schemes.
Now i have added few more pages to application, and facing problem mentioned earlier.
any solution for both the problems.....

Hi,
Let me clear my problem once again.
-->Home page i.e. P2 does not use authorization, So it is displayed along with text item :p2_user_privilege.
-->Then user click on one of the links , Now page :P70: should get displayed.
P70 is using authorization scheme.
-->But :p2_user_priviledge value is not accessible at authorization scheme, I dont know why.
I could not find out where to create Application item , as suggested by you.
& not able to find Developer menu , session at home page as suggested earlier.
And one more question, my application at runtime display
X en us
at bottom
How to make it
USER: X Language: en us
Like in development environment.
Hope I have cleared my problem, waiting for reply.
Edited by: TEJU on Nov 17, 2008 9:25 AM

Problem with table called User?

Hi!
I get the following error message. The error is that there should be a
space after the table name.
com.solarmetric.kodo.runtime.FatalDataStoreException:
com.solarmetric.kodo.impl.jdbc.sql.SQLExceptionWrapper:
[SQL=INSERT INTO User(COUNTRYX, EMAILX, FIRSTNAMEX, JDOCLASSX, JDOIDX,
JDOLOCKX, LASTNAMEX, PASSWORDX, PREFERREDLANGUAGEX, STATEX, USERNAMEX,
WANTSNEWSX) VALUES (null, '[email protected]', 'Mr.',
'com.everwhere.idiomatica.app.security.User', 0, 0, 'Admin', '**admin**',
0, null, 'admin', 0)]
[PRE=INSERT INTO User(COUNTRYX, EMAILX, FIRSTNAMEX, JDOCLASSX, JDOIDX,
JDOLOCKX, LASTNAMEX, PASSWORDX, PREFERREDLANGUAGEX, STATEX, USERNAMEX,
WANTSNEWSX) VALUES (?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?)]
Syntax error or access violation: You have an error in your SQL syntax.
Check the manual that corresponds to your MySQL server version for the
right syntax to use near 'User(COUNTRYX, EMAILX, FIRSTNAMEX, JDOCLASSX,
JDOIDX, JDOLOCKX, [code=1064;state=42000]
Shouldn't the
com.solarmetric.kodo.impl.jdbc.DictionaryClass:
com.solarmetric.kodo.impl.jdbc.schema.dict.MySQLDictionary
setting know how to write the sql statement? or is it a problem with the
table being called user?
Thanks,
Nic.

It is fully dependent on your kodo.properties file:
See:
http://solarmetric.com/Software/Documentation/2.5.0/docs/ref_guide_conf_kodo.html#com.solarmetric.kodo.impl.jdbc.DictionaryProperties
On Wed, 18 Jun 2003 14:52:02 +0000, Nic Cottrell wrote:
Hi Stephen!
I changed the table name and everything works. As far as the InnoDB table
type goes - why does the schematool with ant build MyIsam tables if we
should be using InnoDB type tables?
Nic.
Stephen kim wrote:
I'm not 100% sure as I personally haven't played with mysql recently,
but I would suggest moving to a different table name as IIRC, it is
reserved for MySQL access info. If that doesn't resolve the problem, we
can reinvestigate the situation.
Also, be sure to use InnoDB table type if you expect any transactional
integrity in MySQL (see our docs)
On Wed, 18 Jun 2003 09:54:10 +0000, Nic Cottrell wrote:
Hi!
I get the following error message. The error is that there should be a
space after the table name.
com.solarmetric.kodo.runtime.FatalDataStoreException:
com.solarmetric.kodo.impl.jdbc.sql.SQLExceptionWrapper: [SQL=INSERT
INTO User(COUNTRYX, EMAILX, FIRSTNAMEX, JDOCLASSX, JDOIDX, JDOLOCKX,
LASTNAMEX, PASSWORDX, PREFERREDLANGUAGEX, STATEX, USERNAMEX,
WANTSNEWSX) VALUES (null, '[email protected]', 'Mr.',
'com.everwhere.idiomatica.app.security.User', 0, 0, 'Admin',
'**admin**', 0, null, 'admin', 0)]
[PRE=INSERT INTO User(COUNTRYX, EMAILX, FIRSTNAMEX, JDOCLASSX, JDOIDX,
JDOLOCKX, LASTNAMEX, PASSWORDX, PREFERREDLANGUAGEX, STATEX, USERNAMEX,
WANTSNEWSX) VALUES (?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?)] Syntax error
or access violation: You have an error in your SQL syntax. Check the
manual that corresponds to your MySQL server version for the right
syntax to use near 'User(COUNTRYX, EMAILX, FIRSTNAMEX, JDOCLASSX,
JDOIDX, JDOLOCKX, [code=1064;state=42000] -----------
Shouldn't the
com.solarmetric.kodo.impl.jdbc.DictionaryClass:
com.solarmetric.kodo.impl.jdbc.schema.dict.MySQLDictionary
setting know how to write the sql statement? or is it a problem with
the table being called user?
Thanks,
Nic.
Steve Kim
[email protected]
SolarMetric Inc.
http://www.solarmetric.com
Steve Kim
[email protected]
SolarMetric Inc.
http://www.solarmetric.com

Problem with iTunes multiple users

My wife and I both have an iphone4. Previously we both synced to my itunes under my username on our shared PC.Now I want her to be able to sync to her own itunes account under her own username on our PC. I have downloaded itunes to her account on the PC and then changed the AppleID to her ID so she could download past purchases.
When I logged onto my username on our PC I now get a message saying "This computer is already associated with an AppleID. You can auto download purchases on this computer with just one AppleID every 90 days. You cannot associate this computer with a different AppleID for 81 days".
Originally when I was setting up her iTunes account under username I got a message saying that if I switched account I would not be able to log in again for 90 days. So I went to the Apple store and enquired about this. I was told that was probably just incorrect language used and Apple would know that two separate accounts were running from one PC but with different usernames. Clearly this is not the case.
Obviously this is a problem as it means purchases I am making on my phone, podcasts etc also, are not being transferred to my iTunes account on my computer.
I assume Apple is only recognising this computer, not the fact that we have two separate users.
There are plenty of posts on this site, and other websites, saying it is perfectly possible to run two separate iTunes accounts from one computer, so long as you have separate user accounts on the computer. But it's not working for me.
By the way I have Windows 7 Starter version 6.1.
Does anybody know any fixes for this?
Sorry if this is not clear, I am not technical in any way so I may not have explained this very well.
Any help would be much appreciated. Thank you for your help.

Was your wife logged into the libray at the time you tried to log in? I have had a similar problem and it was because another user was logged into the library when I attempted to. I got the permission denied banner.

Problem with different execution paths in hierarchical query

Hello,
I have problems with the following query:
SELECT DISTINCT P.ID FROM PRODUCTELEMENTIMPL P WHERE ( ( LABEL = 'SomeLabel' AND PRODUCTELEMENTTYPE = 'SomeText' AND ( STATE = 'created' OR STATE = 'stored' OR STATE = 'archived' OR STATE = 'archivedRestored' ) ) ) START WITH P.ID = 42 CONNECT BY PRIOR P.ID = P.PARENT
We have two databases (an Oracle 10g XE and Oracle10g Enterprise). In the XE Database the query is executed very fast, but in the main installation it takes minutes. If I "explain" the query I get two different execution paths:
The fast:
ID      PARENT_ID      LEVEL      SQL      Kosten      Anzahl Zeilen
0      -      1      SELECT STATEMENT      20      49
1      0      2      HASH UNIQUE      20      49
2      1      3      FILTER      -      -
3      2      4      CONNECT BY WITH FILTERING      -      -
4      3      5      TABLE ACCESS BY INDEX ROWID PRODUCTELEMENTIMPL (TABLE)      -      -
5      4      6      INDEX UNIQUE SCAN SYS_C0072201 (INDEX (UNIQUE))      2      1
6      3      5      NESTED LOOPS      -      -
7      6      6      BUFFER SORT      -      -
8      7      7      CONNECT BY PUMP      -      -
9      6      6      TABLE ACCESS BY INDEX ROWID PRODUCTELEMENTIMPL (TABLE)      19      49
10      9      7      INDEX RANGE SCAN PRODUCTELEMENTIMPL_IDX1 (INDEX)      3      49
11      3      5      TABLE ACCESS FULL PRODUCTELEMENTIMPL (TABLE)      19      49
Slow:
ID PARENT_ID LEVEL SQL Kosten Anzahl Zeilen
0 1 SELECT STATEMENT 1 1
1 0 2 HASH UNIQUE 1 1
2 1 3 FILTER
3 2 4 CONNECT BY WITHOUT FILTERING
4 3 5 TABLE ACCESS BY INDEX ROW 3 1
ID PRODUCTELEMENTIMPL (TABLE)
5 4 6 INDEX UNIQUE SCAN SYS_C0 2 1
020528 (INDEX (UNIQUE))
6 3 5 TABLE ACCESS FULL PRODUCT 6628 1100613
ELEMENTIMPL (TABLE)
Any ideas how to avoid this full table scan?
bye
Roland Spatzenegger

Hello,
thank you for your replies. The indices and table schemas are the "same", but only the content for the tables was mirrored.
We made some tests with dropping and/or analyzing the tables, but it didn't change anything.
The main problem is that the query takes 33s in the productive environment for searching in a couple of rows. At the moment it's faster to make
SELECT DISTINCT P.ID, P.STATE FROM PRODUCTELEMENTIMPL P WHERE ( ( LABEL = 'SomeLabel' AND PRODUCTELEMENTTYPE = 'SomeText' ) ) START WITH P.ID = 42 CONNECT BY PRIOR P.ID = P.PARENT
and to test in the application if the state-values match ;-)
If I add the hint /*+ no_filtering */ in the test environment, I get the same "slow" execution path as in the production environment. So the question is, what prevents the filtering in "connect by"?
(I think in the fast version it filters only the results of the hierarchical query, in the slow version it first filters the whole table and joins/merge it with the hierachical result).
bye
Roland Spatzenegger

Problem with different Labview platform

Maybe this issue must be address to NI.
I have this library calling a register DLL. The purpose of the library is to convert a type of movie file from hard drive(*.mcf type) to image stream then to show and eventualy to save it.
The DLL is designed by NAC camera designer, which is a high speed camera. The code is based on properties, methodes and events from DLL.
Code works well in Labview 8.6.1, in Labview 11.0.1, Labview 12.0f3. Unfortunately code does not work in Labview 11.0.1f2 which happens to be the one I am developing my applications.
I will post the code developed by NI Japan (camera also is designed in Japan) and the mcf file as well as the DLL which must be registered.
The code is compiled in 8.6.1.
Register first the dll then open the NAC MCFF Control_E.vi.
Brows the mcf file
Press Open button
Slide the frames one by one for showing the images content of the mcf.
If you want to open under other labview then 8.6.1 then copy the folder and run a mass compile under that version then open the same top vi.
Please, show me what is different for different versions of labview then in my version does not work.
Than you,
Virginia
Solved!
Go to Solution.

Just because it doesn't crash does not mean automatically that everything is alright. You just might be unlucky that the memory corruption does not happen in a vital part of the LabVIEW memory.
Now, when loading your LLB in LabVIEW on my machine, the first indication that something is wrong would be the error message that C:\Windows\System32\gdi32.dll could not be found. And indeed this is a system DLL that should never be referenced by the full path but simply by the DLL name alone. So change the Library Name or Path in the CLN inside the nac_NI_BitmapRead.vi to just "gdi32.dll" (without quotes). And when you are at it, change the first parameter to be a pointer sized integer too, since this IS a pointer.
Now look in the configuration dialog in the Function tab a bit further down and notice that the Calling convention is set to C. 99% of all Windows userspace APIs are really stdcall under Win32 and fastcall under Win64. A "bug" in LabVIEW versions before 2009 attempted to automatically fix wrong calling conventions from C to stdcall, based on certain naming attributes of the actually exported function in the DLL (and no, LabVIEW does not show those decorated names but the human readable name). The problem with this fix was that it did not allow for calling (admittingly seldom but nevertheless possible configurations) of DLL functions that happen to follow this naming scheme but were explicitedly declared cdecl by the programmer.
Try it and tell us if that will help.
Rolf Kalbermatter
CIT Engineering Netherlands
a division of Test & Measurement Solutions

[SOLVED] Problem with .htaccess and user dirs.

Hi!..
I write here because i have a problem with .htaccess files and url rewrites.
I deployed a Cakephp[1] app in my /home/~asmerkin/public_html/books directory. This folder contains a .htaccess file with the following directives:
<IfModule mod_rewrite.c>
RewriteEngine on
RewriteRule ^$ app/webroot/ [L]
RewriteRule (.*) app/webroot/$1 [L]
</IfModule>
My server works well in user directories but it fails to rewrite urls. When i go to http://localhost/~asmerkin/books/ apache returns 404 error. If i go to apache log i find this:
[Sat Sep 04 02:02:02 2010] [error] [client 127.0.0.1] File does not exist: /srv/http/home
So the .htaccess is working but the url it rewrites is not correct. My httpd.conf file is this file[2] and my httpd-userdir.conf is this one[3].
So i'd like to know if somebody can help me with this issue. I tried everything without results.
Thank you!
[1]: Cakephp.org
[2]: http://perkin.pastebin.com/g0dbbW2P
[3]: http://perkin.pastebin.com/fprNYCRY
Last edited by Perkin (2010-09-06 11:24:55)

Finally i had to edit my .htaccess file adding a RewriteBase rule to it.

Problem with role and user; user can't see the table

Hello forum,
I've created a role:
CREATE ROLE enr_service;
GRANT CONNECT TO enr_service;
GRANT ALL ON Locataires TO enr_service;
GRANT ALL ON Batiments TO enr_service;
GRANT ALL ON Sportifs TO enr_service;
GRANT SELECT ON Epreuves TO enr_service;
and also a user:
CREATE USER ENR1 IDENTIFIED BY password QUOTA UNLIMITED ON USERS;
GRANT enr_service TO ENR1;
ALTER USER ENR1 DEFAULT ROLE enr_service;
ALTER USER ENR1 DEFAULT TABLESPACE USERS;
I can connect to the database with this user but when I try to query a table he's been granted access to I get an error message:
SELECT * FROM Sportifs;
ORA-00942: table or view does not exists
I can't see what I've done wrong. Any help is appreciated.
Sebastian

user2019788 wrote:
Hello forum,
I've created a role:
CREATE ROLE enr_service;
GRANT CONNECT TO enr_service;
GRANT ALL ON Locataires TO enr_service;
GRANT ALL ON Batiments TO enr_service;
GRANT ALL ON Sportifs TO enr_service;
GRANT SELECT ON Epreuves TO enr_service;
and also a user:
CREATE USER ENR1 IDENTIFIED BY password QUOTA UNLIMITED ON USERS;
GRANT enr_service TO ENR1;
ALTER USER ENR1 DEFAULT ROLE enr_service;
ALTER USER ENR1 DEFAULT TABLESPACE USERS;
I can connect to the database with this user but when I try to query a table he's been granted access to I get an error message:
SELECT * FROM Sportifs;
ORA-00942: table or view does not exists
I can't see what I've done wrong. Any help is appreciated.
SebastianThat's probably because ENR1 doesn't have any table named SPORTIFS and he didn't qualify the table name with the schema name ...

Systemcopy: problems with different schema users

Similar Messages

Maybe you are looking for