T 61 dead No bios get /post msg after bios upgrade /no screen

hello  all , i  have  a  problem  i  had a  issue few days ago  download  bios update tools from  lenovo  site and  click  on (from laptop not bootable cd)  upgrade  when  i launch  program  it   got  hang  and  i  even  did  not  click  on  yes i  agree  for  upgrade  and  closed  that from task managed with  end task  as it  was  hanged  so  after   restart  laptop  there  no   boot  no  screen no beep  only power  ligts  on  and  when i  try  to  put  bios  bootable cd or any bootable cd it does not  get anything  just  cd rom  is  runing   but  nothing  get  or post  please help  me if  bios  corrupted  or dead what should i do  or  are there any  way to replace  bios chip etc i live in country  side  so  no  lenovo  support  here  thanks in  advance

hi lead_org thanks for your reply   yes mate   i  did   it  also  did  try  to   remove  both  ram's and one by one  if i  take off  ram  then try to  start   it  give few beeps   but  if  put  ram back  and start   then nothing  coming  just  power  lights on and  cd rom is running  if i put any  cd  etc but  nothing  on  screen  like get or post  msg  for bios setting   etc

Similar Messages

  • DB02 Trx Error Msg After EhP5 Upgrade !!

    Hi Experts,
    I've successfully upgraded my ERP 6.0 to EhP5. When using DB02 transaction, I'm getting the error msg "ADBC SQL Error occured" ... "[IBM][CLI Driver][DB2] SAPR3S.DB2QDB02_SCHEMA IS AN UNDEFINED NAME"
    Any hint how I can fix this issue Pls.
    Rgds,
    Sheikh Saggaf
    Edited by: Sheikh Saggaf on Nov 20, 2011 5:31 PM

    Hi,
    Refer SAP Note 1236755 - DB2-z/OS: -204 DB2QWPT2P is an undefined name.
    This note defines problem similar to yours and its respective resolution.
    Regards,
    Deepak Kori

  • BIOS upgrade failed screen blank now

    Following is the problem:
    Problem started when :- Think Vintage pop up to update BIOS and I said
    yes and it could not complate it.
    Now I am getting blank screen Power , battery, (Z) indicators are working (Some sound from drive if I put cd ).
    Please help me it is very urgent
    I brought laptop T61 -7658-cto  from USA and now I am
    in UK and the notebook is not booting. I try to contact your technical
    contacts but no reply.
    Is there a way to fix this problem without sending it to US
    Thanks in advance
    Dijo

    that would probably require a motherboard replacement, not sure whether depot can reflash your bios. Since your machine is a CTO then you would have to send it back to USA for service. Call Lenovo service in USA log a service call, then courier the machine back to the depot, after fixing it they will courier it back to you i think. 

  • Post-process after the upgrade to non-Unicode

    Hello all,
    I'm doing a CU&UC and just completed the first part - non-Unicode.
    Since it will be followed immediately by a Unicode conversion, do you really need to do all the post-upgrade tasks? And if not, which are the mandatory part?
    Thanks again,
    Terry

    You can take the CU&UC Guide..... after upgrade and before unicode it's mandatory to do some steps, aall about unicode preparation.....after do it you can do the export....
    Has you begun this????.
    Regards,
    Alfredo.

  • Job E2E_HK_CONTROLLER getting canceled daily after EHP1 upgrade

    Hi, All,
    We upgraded solman system to EHP1.Since then; this job is getting canceled daily with following error:
    Job Log:
    Job started
    Step 001 started (program E2E_HK_CONTROLLER, variant , user ID SMD_RFC)
    Internal session terminated with a runtime error (see ST22)
    Job cancelled
    ST22 Dump log shows time out dump
    Current patch level is 04
    Kindly suggest how can this be solved

    Hi,
    Details are:
    Runtime Errors         TIME_OUT
    Date and Time          07.01.2010 01:30:54
    Short text
         Time limit exceeded.
    What happened?
         The program "SAPLRRSI" has exceeded the maximum permitted runtime without
         interruption and has therefore been terminated.
    What can you do?
         Note down which actions and inputs caused the error.
         To process the problem further, contact you SAP system
         administrator.
         Using Transaction ST22 for ABAP Dump Analysis, you can look
         at and manage termination messages, and you can also
         keep them for a long time.
    Error analysis
        After a specific time, the program is terminated to make the work area
        available to other users who may be waiting.
        This is to prevent a work area being blocked unnecessarily long by, for
        example:
        - Endless loops (DO, WHILE, ...),
        - Database accesses with a large result set
        - Database accesses without a suitable index (full table scan)
        The maximum runtime of a program is limited by the system profile
        parameter "rdisp/max_wprun_time". The current setting is 3600 seconds. If this
    Roll.... 16192
    EM...... 594970672
    Heap.... 0
    Page.... 16384
    MM Used. 585663104
    MM Free. 9274032
    r and Transaction
    Client.............. 100
    User................ "SMD_RFC"
    Language Key........ "E"
    Transaction......... " "
    Transactions ID..... "4B446D5B2E061DFFE10000003630905C"
    Program............. "SAPLRRSI"
    Screen.............. "SAPMSSY1 3004"
    Screen Line......... 2
    Information on caller of Remote Function Call (RFC):
    System.............. "PS1"
    Database Release.... 701
    Kernel Release...... 701
    Connection Type..... 3 (2=R/2, 3=ABAP System, E=Ext., R=Reg. Ext.)
    Call Type........... "synchron and non-transactional (emode 0, imode 0)"
    Inbound TID.........." "
    Inbound Queue Name..." "
    Outbound TID........." "
    Outbound Queue Name.." "

  • Mail very slow to get new mail after Lion upgrade

    After I upgraded from Snow Leopard to Lion my Mail application has become very sluggish. It takes ages to show new mail from my Gmail account. It seems to spend ages downloaded messages. If I access my Gmail via Safari it is virtually instant.
    Any advice most welcome!

    I had a similar problem and it was related to my wireless network settings.  The Lion upgrade had created a second wireless network setup named Apple 888.b1 on my airport/time capsule.  I deleted that second phantom one so it was just back to the one that I had setup and everything is fine again.
    So if your broadband connction is wireless you might check the wireless settings and see if a second network setup was created.

  • 661FM-L BIOS Upgrade Bad?

    I have two MSI 661FM-L motherboards installed into two new systems.  Both have new Intel P4 3.2Ghz processors with 800Mhz FSB and both have 1GB of memory.  Both booted up fine and we installed Windows XP Professional on them.  We then noticed that the PC's are booting up and only showing 2.8Ghz, so we assumed it needed a BIOS upgrade.  So we downloaded the latest BIOS at http://www.msi.com.tw/program/support/bios/bos/spt_bos_detail.php?UID=501&kind=1 (version 3.6) and now both systems will not boot.  It gets POST, but after detecting the hard disk, DVD burner, etc, it gives the error message "Not support this type CPU: 0F33" and the only option then is to go into the BIOS.  We reset the BIOS values to optimized and safe, both still not fixing this problem.

    This support page shows that board does not support a 3.2G Prescott cpu
    http://www.msi.com.tw/program/products/mainboard/mbd/pro_mbd_cpu_support_detail.php?UID=501&kind=1
    What's odd is it shows it supports every other CPU. Can you confirm if you have a Prescott CPU?

  • HP G7000 G7096EA Won't boot, no post/bios, blank grey screen

    My HP G7000 G7096EA Won't boot, no post/bios, blank grey screen - It does appear to get into windows after return is pressed, albeit with blank grey screen.
    I've reseated the RAM/harddisk, tried the power button reset method. Left it overnight with power battery/power.
    I'm at a loss now with what to try. It does look to be a dead graphics chip, which is a shame and will probably put me off HP for life!

    Ok, I've stripped it down to diagnose. Due to the piss poor cooling on the graphics chip, it's fried itself and melted the solder underneath.
    This was actually the second laptop I had off HP as the first broke within a very short time.
    Needless to say, I'll be buying from Dell in the future! What a crock of **bleep** HP are.
    Oh yeah! And HP wanted £16 + vat just to speak to some outsourced crappy call centre!

  • Premiere elements 12, new installation, serial no. accepted, installation completed and new started, but does not run. I get following msg-box: "LoadLibrary failed with error 126: Das angegebene Modul wurde nicht gefunden."

    premiere elements 12, new installation, serial no. accepted, installation completed and new started, but does not run. I get following msg-box: "LoadLibrary failed with error 126: Das angegebene Modul wurde nicht gefunden."   Installation in German Language on WIN7 professional 64bit, Samsung SSD. What can I do to run that program?

    Jurgen Freund
    Premiere Elements 12 on Window 7 64 bit. What video card/graphics card does your computer use - AMD Radeon?
    I have found this YouTube video on the subject of Error 126 with details for resolving the problem.
    How to fix the ERROR 126 when you open OpenGL programs - YouTube
    The link was contributed in an old 2013 thread here by the ID danneomarre (see post 6 of the following thread)
    LoadLibrary failed with error 126: cant find the required
    Please let us know if that worked for you.
    Thank you.
    ATR
    Add On...When all is OK and working, please update 12 to 12.1 Update using an opened project's Help Menu/Update.

  • Document not getting posted to G\L account

    when i try to release the document to G/L account using vf02 by clicking flag getting error msg : account 800000 requires an assignment to CO object & when i use t-code vfx3 in the log file the msg is incomplete due to FI/CO interface now how to proceed further to post the doc to G/L account pls guide

    Please speak to your FI Consultant.
    He will assign a relevant Cost Element the GL A/c Number 800000 in T-Code FS00 (Under Edit Cost Element Button).
    Hope this helps.. .
    Thanks,
    Jignesh mehta

  • Data getting posted on refreshing IE's refresh button..how to stop

    Hi ,
    we have beent rying to resolve this issue. the problem is when we click on submit button data getting posted on to mobile devices and in the next page "message has been sent " text will come.but if refresh button is clicked again data getting posted to mobile devices.Navigation is like this as below specified.
    1. Login---submit(html file)
    2. jsp page1 with three fields (sender name, mobile numbers, msg box), submit button. on clicking submit calling one java program for sending msgs another jsp page for displaying req is successfull or not.
    3. jsp page 2 displaying "Your message has been sent". Here our problem arises. if the user sends msg for say 10 numbers msg will go and he will come to jsp page2. but if he clicks refresh button on browser/F5 data is getting posted again to the same numbers. so wastage of 10 credits. if it is 100 numbers data will be posted again for the second time to 100 numbers on clicking refresh. which is not at all acceptable by the customer. so the data should not get posted on clicking refresh.
    so please help me in resolving this issue ... its a priority task. it would be great help for me and i would be thankful to all who ever contributing ur valuble suggestions if possible with code.

    Any browser will resend post data on refresh. Maybe store old data for one session then ignore it if its the same as next submition?

  • Keep getting error msg: iTunes has encountered a problem & needs to close.

    My iPod and computer have worked fine for a year and now....iTunes won't connect. If I plug in my iPod I get this msg...if I click on iTunes, I get this msg. Uninstalled and reinstalled...same error. Help please! I want more music and I am such a computer idiot!

    Ta, Amanda!
    When you get back to the PC, if the QuickTime problem is a BEX and the QuickTime control panel error message is:
    An exception occured while trying to run "C:\WINDOWS\system32\shell32.dll,Control_RunDLL "C:\WINDOWS\system32\QuickTime.cpl",QuckTime"
    ... (the key here is that the message shows that the QuickTime.cpl is down in the \system32\ folder), then try proceeding as per my instructions to zach in the following post:
    http://discussions.apple.com/thread.jspa?messageID=10932033&#10932033
    (If the QuickTime control panel error message says something different, post back to let us know what it says.)

  • When opening up Light room 5 i get a msg saying, :an error occurred when attempting to change modules:

    when opening up Light room 5 i get a msg saying, :an error occurred when attempting to change modules:

    Hi Shakenimages,
    Welcome to Adobe Forums
    There is a separate Forums regarding Light room, you can post the query there & the experts will reply you on this.
    Use the link mentioned below to do so.
    Photoshop Lightroom
    Let us know if that helps!
    Thanks
    Garima

  • I get a msg "The licensing subsystem has failed catastrophically"

    I get a msg "The licensing subsystem has failed catastrophically. You must reinstall or call customer support". I have my Adobe Creative Suite 3 Design Premium, PC Win 7. Last month I changed my computer hardware and Bios after a crash. I contacted the chate support and tried to solve the the problem with the solutions
    http://helpx.adobe.com/creative-suite/kb/error-licensing-subsystem-failed-catastrophically .html
    but it didn't work.
    I have got my old original box with the software and serial number.
    Could You pleas help me?

    Run the cleaner tool and reinstall.
    Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
    Mylenium

  • I'm getting a msg saying the folder "itunes" is on a locked disk or you do not have write permissions for this folder? What's going on? Won't sync when i plug in ipod shuffle or touch

    I'm getting a msg saying the folder "itunes" is on a locked disk or you do not have write permissions for this folder? What's going on? Won't sync when i plug in ipod shuffle or touch.

    Post this in the iTunes forum as it does not pertain to an iPod Shuffle.
    https://discussions.apple.com/community/itunes
    B-rock

Maybe you are looking for

  • HP Officejet Pro 8610 will not install on Windows 2003 Server 32 bit.

    When installing the 8610 with the disk, at the end it states and error occurred during the installation of the device.  The specified module could not be found. When I install using the downloaded drivers,  after the files extract and the program con

  • Apple's Mail program can't handle junk mail

    I've had this machine for almost two months now and I'm STILL having problems with Apple's mail program: 1. It doesn't recognize junk mail. Although I've been in "train" mode for almost two months, it STILL doesn't recognize ANYTHING as junk mail, ev

  • IPod delivery times?

    I ordered a new iPod Touch, since my 4th Generation Touch is completely broken. This is the first time I've ordered an item from the Apple Store. I coughed up an extra 10 bucks to get the 2-3 day shipping--I got my name engraved into it, so that sets

  • Aperture, good cataloger for Photoshop,but is there more?

    Hi, I am trying to maximize the benefits of Aperture, but there is still confusion. Aperture obviously is great at storing, cataloging, comparing, retrieving and opening images. The books and web tools are convenient and work quite well also. My prob

  • ADOBE forms and selection screen.

    Hello experts. I'm facing a problem. i need to create a pdf form based on data from a selection screen. everything works fine BUT when i navigate back from the form to the selection screen it does not clear the data - which means the gui fields are e