T.code FBZG: editing of failed payment trans .. Client 400 has state not ..

Hi All,
launching t.code FBZG, and filling in, then, the company code,
I choose the option "enter data and maintain copied data" and select the button "maintain data"
SAP gives the the pop-up with the message:
" Client 400 has status 'not modifiable "
What could it depen on?
Thanks a lot for Your advices.
Gandalf

Hello,
You have two alternatives:
1. Recommended
Call up transaction SOBJ. Click the "Maintain" button
Postion the cursor on the V_TINSO entry.
Select the field "Current Settings" (V_OBJ_H-CURSETTINGS).
Save the Entry.
If the object category of the view in your system is "APPL" change it to "CUST", before you select the "Current Settings" flag.
Please refer SAP Note No.387533.
2. Not recommended.
You can change the Client Role in Test System to "Production", it would then allow you to enter the data. Before that please consult your Basis Administrator.
Hope this will help you.
Regards,
Ravi

Similar Messages

Event booking entries created for failed payments

We accept credit card payments on our event booking forms. In the event that the customer makes an error in entering their payment information, the page correctly detects the error and reports it.
However, attempt is seen as a "failed payment" and an event booking with a status of Failed is created for this event.
Is there a way to prevent failed attempts from creating an entry in the event booking list?

I've inserted the form onto the web app item detail page using the following code which references a .tpl file where the form is located:
<div id="booking-form">{module_booking,i,{tag_booking id}
template="/ModuleTemplates/Events/{tag_payment type}.tpl"}</div>
The form has the auto-responder turned on but as mentioned, when I test the form it doesn't send the contents of the auto-responder from the form, it sends something different as mentioned in the original post.
I actually saw a tutorial on this at the following site:
Handle Paid and Unpaid Event Registrations with Business Catalyst
It didn't mention the auto-responder though.
Maybe because of the way I've set it up, perhaps it's not possible to send the auto-responder from the original form, do you think?

Preverification failed with error code 1. BUILD FAILED

Hallo Oracle,
Am learning my first J2me application and when i build it am getting this error. can some one help me understand what it means
Created dir: C:\Users\Dell\Documents\NetBeansProjects\watsdownapp\build\preverifysrc
Copying 1957 files to C:\Users\Dell\Documents\NetBeansProjects\watsdownapp\build\preverifysrc
Created dir: C:\Users\Dell\Documents\NetBeansProjects\watsdownapp\build\preverified
Preverifying 1957 file(s) into C:\Users\Dell\Documents\NetBeansProjects\watsdownapp\build\preverified directory.
Error preverifying class com.sun.activation.registries.MailcapFile
    VERIFIER ERROR com/sun/activation/registries/MailcapFile
.<init>(Ljava/lang/String;)V:
Cannot find class java/util/Map
C:\Users\Dell\Documents\NetBeansProjects\watsdownapp\nbproject\build-impl.xml:431: Preverification failed with error code 1.
BUILD FAILED (total time: 25 seconds)
this is the contents of build-impx.xml
<?xml version="1.0" encoding="UTF-8"?>

<project name="watsdownapp-impl" default="jar" basedir="..">
    
    <target name="pre-load-properties">
        <property file="nbproject/private/private.properties"/>
        <property name="user.properties.file" location="${netbeans.user}/build.properties"/>
        <available property="user.properties.file.exists" file="${user.properties.file}"/>
    </target>
    <target name="exists.config.active" unless="config.active">
        <echo level="warning" message="Active configuration (config.active property) is not set - using default."/>
        <property value="" name="config.active"/>
    </target>
    <target name="exists.netbeans.user" unless="netbeans.user">
        <echo level="warning" message="NetBeans IDE user directory (netbeans.user property) is not set. By specifying this property many properties required by the project will be automatically evaluated (e.g.: ant-ext library home, ...). You could also open this project in the NetBeans IDE - in this case this property would be set automatically."/>
    </target>
    <target name="exists.user.properties.file" unless="user.properties.file.exists">
        <echo level="warning" message="User properties file (user.properties.file) property is not set. By specifying this property many properties required by the project will be automatically evaluated (e.g.: libraries, platforms, ...)."/>
    </target>
    <target name="load-properties" depends="pre-load-properties,exists.config.active,exists.netbeans.user,exists.user.properties.file">
        <loadproperties srcfile="nbproject/project.properties">
            <filterchain>
                <containsregex pattern="^configs\.${config.active}\.(.*)" replace="\1"/>
                <concatfilter prepend="nbproject/project.properties"/>
                <containsregex pattern="^platform.active=|^deployment.method=|^deployment.instance="/>
            </filterchain>
        </loadproperties>
        <property name="deployment.instance" value="default"/>
        <loadproperties srcfile="${user.properties.file}">
            <filterchain>
                <replaceregex pattern="^platforms\.${platform.active}\." replace="platform."/>
                <replaceregex pattern="^deployment\.${deployment.method}\.scriptfile=" replace="deployment.scriptfile="/>
                <replaceregex pattern="^deployments\.${deployment.method}\.${deployment.instance}\.([^=]+)=" replace="\1="/>
            </filterchain>
        </loadproperties>
        <loadproperties srcfile="nbproject/project.properties">
            <filterchain>
                <containsregex pattern="^configs\.${config.active}\.(.*)" replace="\1"/>
                <concatfilter prepend="nbproject/project.properties"/>
            </filterchain>
        </loadproperties>
    </target>
    
    <target name="exists.platform.active" unless="platform.active">
        <echo level="warning" message="Active platform (platform.active property) in not set. If you set this and user.properties.file property, many properties required by the project will be automatically evaluated (e.g.: platform home, platform classpath, ...)."/>
    </target>
    <target name="exists.platform.configuration" unless="platform.configuration">
        <echo level="warning" message="Platform configuration (platform.configuration) is not set. Using default (CLDC-1.0) configuration."/>
        <property name="platform.configuration" value="CLDC-1.0"/>
    </target>
    <target name="exists.platform.profile" unless="platform.profile">
        <echo level="warning" message="Platform profile (platform.profile) is not set. Using default (MIDP-1.0) profile."/>
        <property name="platform.profile" value="MIDP-1.0"/>
    </target>
    <target name="basic-init" depends="exists.platform.active,exists.platform.configuration,exists.platform.profile">
        <fail unless="libs.j2me_ant_ext.classpath">Classpath to J2ME Ant extension library (libs.j2me_ant_ext.classpath property) is not set. For example: location of mobility/modules/org-netbeans-mobility-antext.jar file in the IDE installation directory.</fail>
        <fail unless="platform.home">Platform home (platform.home property) is not set. Value of this property should be ${platform.active.description} emulator home directory location.</fail>
        <fail unless="platform.bootclasspath">Platform boot classpath (platform.bootclasspath property) is not set. Value of this property should be ${platform.active.description} emulator boot classpath containing all J2ME classes provided by emulator.</fail>
        <fail unless="src.dir">Must set src.dir</fail>
        <fail unless="build.dir">Must set build.dir</fail>
        <fail unless="dist.dir">Must set dist.dir</fail>
        <fail unless="dist.jar">Must set dist.jar</fail>
        <property name="javac.source" value="1.3"/>
        <property name="javac.target" value="1.1"/>
        <property name="javac.encoding" value="${file.encoding}"/>
        <property name="deployment.number" value="0.0.1"/>
        <property name="deployment.counter" value="000002"/>
        <condition property="no.deps">
            <istrue value="${no.dependencies}"/>
        </condition>
        <condition property="no.preprocess">
            <isfalse value="${use.preprocessor}"/>
        </condition>
        <condition property="no.javadoc.preview">
            <isfalse value="${javadoc.preview}"/>
        </condition>
        <condition property="filter.excludes.evaluated" value="${filter.excludes},${filter.more.excludes},**/*Test.java,**/test,**/test/**">
            <istrue value="${filter.exclude.tests}"/>
        </condition>
        <property name="filter.excludes.evaluated" value="${filter.excludes},${filter.more.excludes}"/>
        <condition property="deployment.do.override.jarurl" value="">
            <istrue value="${deployment.override.jarurl}"/>
        </condition>
        <condition property="config.active.name" value="DefaultConfiguration">
            <length string="${config.active}" trim="true" length="0"/>
        </condition>
        <property name="config.active.name" value="${config.active}"/>
        <taskdef resource="org/netbeans/mobility/antext/defs.properties">
            <classpath>
                <pathelement path="${libs.j2me_ant_ext.classpath}"/>
            </classpath>
        </taskdef>
        <condition property="skip.deployment">
            <equals arg1="${deployment.method}" arg2="NONE" casesensitive="false" trim="true"/>
        </condition>
        <condition property="app-version.autoincrement.trigger">
            <istrue value="${app-version.autoincrement}"/>
        </condition>
        <condition property="debug.timeout" value="30000">
            <or>
                <equals arg1="${debugger.timeout}" arg2="" trim="true"/>
                <not>
                    <isset property="debugger.timeout"/>
                </not>
            </or>
        </condition>
        <property name="debug.timeout" value="${debugger.timeout}"/>
        <nb-overrideproperty name="buildsystem.baton" value="${src.dir}"/>
    </target>
    
    <target name="cldc-pre-init">
        <condition property="cldc-platform.trigger">
            <equals arg1="CLDC" arg2="${platform.trigger}" casesensitive="false"/>
        </condition>
    </target>
    <target name="cldc-init" depends="cldc-pre-init" if="cldc-platform.trigger">
        <property name="preverify.sources.dir" location="${build.dir}/preverifysrc"/>
        <property name="manifest.build.file" location="${build.dir}/manifest.mf"/>
        <property name="platform.device" value=""/>
        <property name="dist.jad.url" value="file://"/>
        <property name="run.cmd.options" value=""/>
        <condition property="evaluated.run.security.domain" value="">
            <isfalse value="${run.use.security.domain}"/>
        </condition>
        <property name="evaluated.run.security.domain" value="${run.security.domain}"/>
        <condition property="override.jarurl.trigger">
            <and>
                <istrue value="${cldc-platform.trigger}"/>
                <istrue value="${deployment.override.jarurl}"/>
            </and>
        </condition>
        <property name="deployment.jad" location="${dist.dir}/${dist.jad}"/>
        <property name="deployment.jar" location="${dist.dir}/${dist.jar}"/>
        <property name="deployment.dir" location="${dist.dir}"/>
        <patternset id="deployment.patternset">
            <include name="${dist.jad}"/>
            <include name="${dist.jar}"/>
        </patternset>
    </target>
    
    <target name="cdc-init">
        <condition property="cdc-platform.trigger">
            <equals arg1="CDC" arg2="${platform.trigger}" casesensitive="false"/>
        </condition>
        <available file="${manifest.file}" property="manifest.available"/>
        <condition property="main.class.applet">
            <equals arg1="${main.class.class}" arg2="applet" casesensitive="false"/>
        </condition>
        <condition property="main.class.xlet">
            <equals arg1="${main.class.class}" arg2="xlet" casesensitive="false"/>
        </condition>
        <condition property="manifest.available+main.class+fat.jar">
            <and>
                <isset property="manifest.available"/>
                <isset property="main.class"/>
                <istrue value="${platform.fat.jar}"/>
                <not>
                    <equals arg1="${main.class}" arg2="" trim="true"/>
                </not>
            </and>
        </condition>
        <condition property="manifest.available+main.class">
            <and>
                <isset property="manifest.available"/>
                <isset property="main.class"/>
                <isfalse value="${platform.fat.jar}"/>
                <not>
                    <equals arg1="${main.class}" arg2="" trim="true"/>
                </not>
            </and>
        </condition>
        <condition property="application.version.invalid" value="true">
            <equals arg1="${deployment.number}" arg2="" trim="true"/>
        </condition>
        <fail if="application.version.invalid" message="Property deployment.number must not be empty and must contain version in format %d.%d.%d!"/>
        <condition property="sign.jar.trigger" value="true">
            <and>
                <isset property="cdc-platform.trigger"/>
                <istrue value="${sign.enabled}"/>
            </and>
        </condition>
    </target>
    
    <target name="semc-pre-init" if="cdc-platform.trigger">
        <condition property="semc-platform.trigger">
            <equals arg1="semc" arg2="${platform.type}" casesensitive="false"/>
        </condition>
    </target>
    <target name="semc-init" depends="semc-pre-init" if="semc-platform.trigger">
        <condition property="semc.icon.invalid" value="true">
            <or>
                <contains string="${semc.application.icon}" substring="$${"/>
                <equals arg1="${semc.application.icon}" arg2="" trim="true"/>
            </or>
        </condition>
        <condition property="no.certificateorkey" value="true">
            <or>
                <isset property="no.application.uid"/>
                <equals arg1="${semc.certificate.path}" arg2="" trim="true"/>
                <contains string="${semc.certificate.path}" substring="$${semc.certificate.path"/>
                <equals arg1="${semc.private.key.path}" arg2="" trim="true"/>
                <contains string="${semc.private.key.path}" substring="$${semc.private.key.path"/>
            </or>
        </condition>
        <property name="j9.dist" location="${build.dir}/j9/${semc.application.uid}.j9"/>
        <taskdef resource="org/netbeans/modules/j2me/cdc/project/defs.properties">
            <classpath>
                <pathelement path="${libs.cdc-ant-utils.classpath}"/>
            </classpath>
        </taskdef>
        <taskdef resource="org/netbeans/modules/j2me/cdc/project/semc/defs.properties">
            <classpath>
                <pathelement path="${libs.semc-ant-utils.classpath}"/>
            </classpath>
        </taskdef>
        <property name="deployment.dir" location="${dist.dir}"/>
        <patternset id="deployment.patternset">
            <include name="*.sis"/>
            <include name="*.SIS"/>
        </patternset>
    </target>
    
    <target name="savaje-pre-init" if="cdc-platform.trigger">
        <condition property="savaje-platform.trigger">
            <equals arg1="savaje" arg2="${platform.type}" casesensitive="false"/>
        </condition>
    </target>
    <target name="savaje-init" depends="savaje-pre-init" if="savaje-platform.trigger">
        <property name="savaje.application.uid" value="TBD"/>
        <condition property="savaje.bundle.base.invalid" value="true">
            <or>
                <equals arg1="${savaje.bundle.base}" arg2="" trim="true"/>
                <contains string="${savaje.bundle.base}" substring="$${savaje.bundle.base"/>
            </or>
        </condition>
        <condition property="savaje.unsupported.main" value="true">
            <or>
                <equals arg1="${main.class.applet}" arg2="true"/>
            </or>
        </condition>
        <condition property="savaje.icon.invalid" value="true">
            <or>
                <isset property="no.application.uid"/>
                <contains string="${savaje.application.icon}" substring="$${"/>
                <equals arg1="${savaje.application.icon}" arg2="" trim="true"/>
            </or>
        </condition>
        <property name="jnlp.dist" value="${build.dir}/jnlp/bundle.jnlp"/>
        <property name="deployment.dir" location="${dist.dir}"/>
        <patternset id="deployment.patternset">
            <include name="bundle.jnlp"/>
            <include name="bundle.policy"/>
            <include name="lib/*"/>
        </patternset>
    </target>
    
    <target name="sjmc-pre-init" if="cdc-platform.trigger">
        <condition property="sjmc-platform.trigger">
            <equals arg1="sjmc" arg2="${platform.type}" casesensitive="false"/>
        </condition>
    </target>
    <target name="sjmc-init" depends="sjmc-pre-init" if="sjmc-platform.trigger"/>
    
    <target name="ojec-pre-init" if="cdc-platform.trigger">
        <condition property="ojec-platform.trigger">
            <equals arg1="ojec" arg2="${platform.type}" casesensitive="false"/>
        </condition>
    </target>
    <target name="ojec-init" depends="ojec-pre-init" if="ojec-platform.trigger"/>
    
    <target name="cdc-hi-pre-init" if="cdc-platform.trigger">
        <condition property="cdc-hi-platform.trigger">
            <equals arg1="cdc-hi" arg2="${platform.type}" casesensitive="false"/>
        </condition>
    </target>
    <target name="cdc-hi-init" depends="cdc-hi-pre-init" if="cdc-hi-platform.trigger"/>
    
    <target name="nokiaS80-pre-init" if="cdc-platform.trigger">
        <condition property="nokiaS80-platform.trigger">
            <equals arg1="nokiaS80" arg2="${platform.type}" casesensitive="false"/>
        </condition>
    </target>
    <target name="nokiaS80-init" depends="nokiaS80-pre-init" if="nokiaS80-platform.trigger">
        <property name="j9.dist" location="${build.dir}/j9/NOKIA.j9"/>
        <property name="manifest.build.file" location="${build.dir}/manifest.mf"/>
        <condition property="nokia.icon.invalid">
            <or>
                <contains string="${nokiaS80.application.icon}" substring="$${"/>
                <equals arg1="${nokiaS80.application.icon}" arg2="" trim="true"/>
            </or>
        </condition>
        <property name="deployment.dir" location="${dist.dir}"/>
        <patternset id="deployment.patternset">
            <include name="${dist.jar}"/>
        </patternset>
    </target>
    
    <target name="pre-init"/>
    <target name="post-init"/>
    <target name="init" depends="pre-init,load-properties,basic-init,cldc-init,cdc-init,semc-init,savaje-init,sjmc-init,ojec-init,cdc-hi-init,nokiaS80-init,post-init"/>
    
    <target name="conditional-clean-init">
        <uptodate property="no.clean.before.build" targetfile="${build.dir}/.timestamp">
            <srcfiles dir="nbproject">
                <include name="project.properties"/>
                <include name="build-impl.xml"/>
            </srcfiles>
        </uptodate>
    </target>
    <target name="conditional-clean" depends="init,conditional-clean-init" unless="no.clean.before.build" description="Clean project in case its meta information has changed.">
        <antcall target="do-clean" inheritall="true" inheritrefs="true"/>
    </target>
    
    <target name="deps-jar" depends="conditional-clean" unless="no.deps"/>
    
    <target name="pre-preprocess"/>
    <target name="do-preprocess" unless="no.preprocess">
        <fail unless="preprocessed.dir">Must set preprocessed.dir</fail>
        <property name="abilities" value=""/>
        <property name="debug.level" value="debug"/>
        <mkdir dir="${preprocessed.dir}"/>
        <echo message="ignore me" file="${build.dir}/.timestamp"/>
        <nb-prep destdir="${preprocessed.dir}" preprocessfor="${config.active.name},${abilities},DebugLevel=${debug.level}" encoding="${javac.encoding}">
            <fileset dir="${buildsystem.baton}" defaultexcludes="${filter.use.standard}" excludes="${filter.excludes.evaluated}"/>
        </nb-prep>
        <copy todir="${preprocessed.dir}">
            <fileset dir="${buildsystem.baton}" defaultexcludes="${filter.use.standard}" excludes="${filter.excludes.evaluated},${build.classes.excludes}"/>
        </copy>
        <nb-overrideproperty name="buildsystem.baton" value="${preprocessed.dir}"/>
    </target>
    <target name="post-preprocess"/>
    <target name="preprocess" depends="deps-jar,pre-preprocess,do-preprocess,post-preprocess" description="Preprocess project sources."/>
    
    <target name="pre-compile"/>
    <target name="do-compile">
        <fail unless="build.classes.dir">Must set build.classes.dir</fail>
        <mkdir dir="${build.classes.dir}"/>
        <javac includeantruntime="false" source="${javac.source}" target="${javac.target}" deprecation="${javac.deprecation}" optimize="${javac.optimize}" debug="${javac.debug}" destdir="${build.classes.dir}" srcdir="${buildsystem.baton}" bootclasspath="${platform.bootclasspath}" encoding="${javac.encoding}">
            <classpath>
                <path path="${libs.classpath}"/>
            </classpath>
        </javac>
        <copy todir="${build.classes.dir}">
            <fileset dir="${buildsystem.baton}" defaultexcludes="${filter.use.standard}" excludes="${filter.excludes.evaluated},${build.classes.excludes}"/>
        </copy>
        <nb-overrideproperty name="buildsystem.baton" value="${build.classes.dir}"/>
    </target>
    <target name="extract-libs" description="Extracts all bundled libraries.">
        <mkdir dir="${build.classes.dir}"/>
        <nb-extract dir="${build.classes.dir}" excludeManifest="true" classpath="${libs.classpath}" excludeclasspath="${extra.classpath}"/>
    </target>
    <target name="post-compile"/>
    <target name="compile" depends="preprocess,pre-compile,extract-libs,do-compile,post-compile" description="Compile project classes."/>
    
    <target name="pre-compile-single"/>
    <target name="do-compile-single">
        <fail unless="javac.includes">Must select some files in the IDE or set javac.includes</fail>
        <mkdir dir="${build.classes.dir}"/>
        <javac includeantruntime="false" source="${javac.source}" target="${javac.target}" deprecation="${javac.deprecation}" optimize="${javac.optimize}" debug="${javac.debug}" srcdir="${buildsystem.baton}" destdir="${build.classes.dir}" bootclasspath="${platform.bootclasspath}" includes="${javac.includes}" encoding="${javac.encoding}">
            <classpath>
                <path path="${libs.classpath}"/>
            </classpath>
        </javac>
    </target>
    <target name="post-compile-single"/>
    <target name="compile-single" depends="preprocess,pre-compile-single,do-compile-single,post-compile-single" description="Compile selected project classes."/>
    
    <target name="proguard-init" description="Up-to-date check before obfuscation.">
        <property name="obfuscation.level" value="0"/>
        <condition property="no.obfusc">
            <or>
                <equals arg1="${obfuscation.level}" arg2="0"/>
                <uptodate targetfile="${obfuscator.destjar}">
                    <srcfiles dir="${buildsystem.baton}"/>
                </uptodate>
            </or>
        </condition>
        <uptodate property="obfuscation.up-to-date" targetfile="${obfuscator.destjar}">
            <srcfiles dir="${buildsystem.baton}"/>
        </uptodate>
    </target>
    <target name="skip-obfuscation" depends="proguard-init" if="obfuscation.up-to-date">
        <fail unless="obfuscated.classes.dir">Must set obfuscated.classes.dir</fail>
        <nb-overrideproperty name="buildsystem.baton" value="${obfuscated.classes.dir}"/>
    </target>
    <target name="proguard" depends="skip-obfuscation" description="Obfuscate project classes." unless="no.obfusc">
        <fail unless="obfuscated.classes.dir">Must set obfuscated.classes.dir</fail>
        <fail unless="obfuscator.srcjar">Must set obfuscator.srcjar</fail>
        <fail unless="obfuscator.destjar">Must set obfuscator.destjar</fail>
        <property name="obfuscator.classpath" value=""/>
        <dirname file="${obfuscator.srcjar}" property="obfuscator.srcjar.dir"/>
        <dirname file="${obfuscator.destjar}" property="obfuscator.destjar.dir"/>
        <mkdir dir="${obfuscator.srcjar.dir}"/>
        <mkdir dir="${obfuscator.destjar.dir}"/>
        <jar jarfile="${obfuscator.srcjar}" basedir="${buildsystem.baton}"/>
        <property name="obfuscation.custom" value=""/>
        <nb-obfuscate srcjar="${obfuscator.srcjar}" destjar="${obfuscator.destjar}" obfuscatorclasspath="${obfuscator.classpath}" classpath="${platform.bootclasspath}:${extra.classpath}" obfuscationLevel="${obfuscation.level}" extraScript="${obfuscation.custom}"/>
        <mkdir dir="${obfuscated.classes.dir}"/>
        <unjar src="${obfuscator.destjar}" dest="${obfuscated.classes.dir}"/>
        <nb-overrideproperty name="buildsystem.baton" value="${obfuscated.classes.dir}"/>
    </target>
    
    <target name="pre-obfuscate"/>
    <target name="post-obfuscate"/>
    <target name="obfuscate" depends="compile,pre-obfuscate,proguard,post-obfuscate" description="Obfuscate project classes."/>
    
    <import file="lwuit.xml" optional="true"/>
    <target name="-lwuit-check">
        <condition property="lwuit.allowed">
            <and>
                <available file="nbproject/lwuit.xml"/>
                <isset property="is.mesdk_lwuit"/>
            </and>
        </condition>
    </target>
    <target name="-pre-lwuit-build" depends="-lwuit-check" if="lwuit.allowed"/>
    <target name="-lwuit-build" depends="-lwuit-check" if="lwuit.allowed">
        <antcall target="lwuit_build"/>
    </target>
    <target name="-post-lwuit-build" depends="-lwuit-check" if="lwuit.allowed"/>
    <target name="lwuit-build" depends="-lwuit-check,-pre-lwuit-build, -lwuit-build, -post-lwuit-build" if="lwuit.allowed"/>
    
    <target name="pre-preverify"/>
    <target name="do-preverify" if="cldc-platform.trigger">
        <fail unless="preverify.classes.dir">Must set preverify.classes.dir</fail>
        <mkdir dir="${preverify.sources.dir}"/>
        <copy todir="${preverify.sources.dir}">
            <fileset dir="${buildsystem.baton}" includes="**/*.class"/>
        </copy>
        <mkdir dir="${preverify.classes.dir}"/>
        <nb-preverify srcdir="${preverify.sources.dir}" destdir="${preverify.classes.dir}" classpath="${platform.bootclasspath}:${extra.classpath}" configuration="${platform.configuration}" platformhome="${platform.home}" platformtype="${platform.type}" commandline="${platform.preverifycommandline}"/>
        <copy todir="${preverify.classes.dir}">
            <fileset dir="${buildsystem.baton}" defaultexcludes="${filter.use.standard}" excludes="${filter.excludes.evaluated},${build.classes.excludes}"/>
        </copy>
        <nb-overrideproperty name="buildsystem.baton" value="${preverify.classes.dir}"/>
    </target>
    <target name="post-preverify"/>
    <target name="preverify" depends="obfuscate,lwuit-build,pre-preverify,do-preverify,post-preverify" description="Preverify project classes."/>
    
    <target name="set-password-init">
        <property name="sign.enabled" value="false"/>
        <condition property="skip-sign-keystore-password-input">
            <or>
                <isfalse value="${sign.enabled}"/>
                <and>
                    <isset property="sign.keystore"/>
                    <isset property="sign.keystore.password"/>
                    <not>
                        <equals arg1="${sign.keystore}" arg2="" trim="true"/>
                    </not>
                    <not>
                        <equals arg1="${sign.keystore.password}" arg2="" trim="true"/>
                    </not>
                </and>
            </or>
        </condition>
        <condition property="skip-sign-alias-password-input">
            <or>
                <isfalse value="${sign.enabled}"/>
                <and>
                    <isset property="sign.keystore"/>
                    <isset property="sign.alias"/>
                    <isset property="sign.alias.password"/>
                    <not>
                        <equals arg1="${sign.keystore}" arg2="" trim="true"/>
                    </not>
                    <not>
                        <equals arg1="${sign.alias}" arg2="" trim="true"/>
                    </not>
                    <not>
                        <equals arg1="${sign.alias.password}" arg2="" trim="true"/>
                    </not>
                </and>
            </or>
        </condition>
    </target>
    <target name="set-keystore-password" if="netbeans.home" unless="skip-sign-keystore-password-input">
        <nb-enter-password keystore="${sign.keystore}" passwordproperty="sign.keystore.password"/>
    </target>
    <target name="set-alias-password" if="netbeans.home" unless="skip-sign-alias-password-input">
        <nb-enter-password keystore="${sign.keystore}" keyalias="${sign.alias}" passwordproperty="sign.alias.password"/>
    </target>
    <target name="set-password" depends="set-password-init,set-keystore-password,set-alias-password"/>
    
    <target name="add-configuration" unless="contains.manifest.configuration">
        <nb-output file="${dist.dir}/${dist.jad}" encoding="UTF-8" append="true">MicroEdition-Configuration: ${platform.configuration}
</nb-output>
        <nb-output file="${manifest.build.file}" encoding="UTF-8" append="true">MicroEdition-Configuration: ${platform.configuration}
</nb-output>
    </target>
    <target name="add-profile" unless="contains.manifest.profile">
        <nb-output file="${dist.dir}/${dist.jad}" encoding="UTF-8" append="true">MicroEdition-Profile: ${platform.profile}
</nb-output>
        <nb-output file="${manifest.build.file}" encoding="UTF-8" append="true">MicroEdition-Profile: ${platform.profile}
</nb-output>
    </target>
    <target name="create-jad" if="cldc-platform.trigger">
        <fail unless="dist.jad">Must set dist.jad</fail>
        <mkdir dir="${build.dir}"/>
        <dirname file="${dist.dir}/${dist.jad}" property="dist.jad.dir"/>
        <mkdir dir="${dist.jad.dir}"/>
        <condition property="evaluated.manifest.apipermissions" value="${manifest.apipermissions}">
            <not>
                <equals arg1="${platform.profile}" arg2="MIDP-1.0"/>
            </not>
        </condition>
        <condition property="evaluated.manifest.pushregistry" value="${manifest.pushregistry}">
            <not>
                <equals arg1="${platform.profile}" arg2="MIDP-1.0"/>
            </not>
        </condition>
        <condition property="contains.manifest.configuration">
            <contains substring="MicroEdition-Configuration: " string="${manifest.others}"/>
        </condition>
        <condition property="contains.manifest.profile">
            <contains substring="MicroEdition-Profile: " string="${manifest.others}"/>
        </condition>
        <property value="" name="evaluated.manifest.apipermissions"/>
        <property value="" name="evaluated.manifest.pushregistry"/>
        <property name="manifest.jad" value=""/>
        <property name="manifest.manifest" value=""/>
        <nb-output file="${dist.dir}/${dist.jad}" encoding="UTF-8">${manifest.midlets}${evaluated.manifest.apipermissions}${evaluated.manifest.pushregistry}${manifest.others}${manifest.jad}</nb-output>
        <nb-output file="${manifest.build.file}" encoding="UTF-8">${manifest.midlets}${evaluated.manifest.apipermissions}${evaluated.manifest.pushregistry}${manifest.others}${manifest.manifest}</nb-output>
        <antcall target="add-configuration" inheritall="true" inheritrefs="true"/>
        <antcall target="add-profile" inheritall="true" inheritrefs="true"/>
        <property name="manifest.available" value="true"/>
    </target>
    
    <target name="do-extra-libs" if="extra.classpath">
        <property name="dist.lib.dir" value="${dist.dir}/lib"/>
        <mkdir dir="${dist.lib.dir}"/>
        <copy todir="${dist.lib.dir}">
            <path path="${extra.classpath}"/>
            <flattenmapper/>
        </copy>
    </target>
    
    <target name="nokiaS80-prepare-j9" if="nokiaS80-platform.trigger">
        <fail message="Main class is not set!">
            <condition>
                <equals arg1="${main.class}" arg2="" trim="true"/>
            </condition>
        </fail>
        <mkdir dir="${build.dir}/j9"/>
        <taskdef name="j9builder" classname="org.netbeans.modules.j2me.cdc.project.J9Builder" classpath="${libs.cdc-ant-utils.classpath}"/>
        <j9builder jvmargs="${run.jvmargs}" mainclass="${main.class}" args="${application.args}" home="${platform.home}" dist="${j9.dist}" id="NOKIA" platform="${platform.type}" xlet="${main.class.xlet}" applet="${main.class.applet}" jarname="${dist.jar}"/>
        <copy file="${manifest.file}" tofile="${manifest.build.file}" failonerror="false"/>
        <property name="manifest.available" value="true"/>
        <loadfile property="nokia.manifest.j9" srcFile="${j9.dist}"/>
    </target>
    <target name="nokiaS80-prepare-manifest" depends="nokiaS80-prepare-j9" if="nokiaS80-platform.trigger" unless="nokia.icon.invalid">
        <pathconvert property="logo.icon.name" pathsep=" ">
            <path path="${nokiaS80.application.icon}"/>
            <chainedmapper>
                <flattenmapper/>
                <globmapper from="*" to="*"/>
            </chainedmapper>


The error says class file is missing, you can try to clean and build.

Error while trying to open edge-code-quick-edit.png

Hi,
I just installed Edge Code, looks great! A couple of issues I noticed when I started using it:
1. When tried opening one of the files (edge-code-quick-edit.png) displayed in the file explorer on the left side. I get an error while trying to do so.
2. The error dialog's text doesn't seem to be selectable, will be great if error messages can be selected and copied.
thnx
-mayank

I think Peter's reply above might have been to a different thread.
Brackets doesn't support opening binary files yet. This includes images. See https://github.com/adobe/brackets/issues/148
Good point. I've filed a bug. Due to some issues with our architecture and focus management, this doesn't work currently. https://github.com/adobe/brackets/issues/1708

Help!!! T61 Blue Screen--unmountable boot volume-- error code 0000: Read verification failed

My computer is T61 (8891CT), but Blue Screen came out and reported--unmountable boot volume. I ran the diagnostic program and got the error code 0000: Read verification failed. I can’t run anything now including the restore and rescue. Has the hard drive died?
If the hard drive has died, I have to change the hard drive, but how to transfer the system (I don’t have any CD) and think vantage software? Thank you very much for you help.

Hi equalefk,
Yes, definitely sounds like it's time to replace the HDD.
Hope it helps.
Maliha (I don't work for lenovo)
ThinkPads:- T400[Win 7], T60[Win 7], IBM 240[Win XP]
IdeaPad: U350
Apple:- Macbook Air [Snow Leopard]
Did someone help you today? Compliment them with a Kudos!
Was your question answered today? Mark it as an Accepted Solution!
Lenovo Deutsche Community Lenovo Comunidad en Español
Visit my YouTube Channel

HP Officejet Pro 8610 - Error Code: " 0xc19a0013" (missing or failed printhead)

I purchased the printer (HP Officejet Pro 8610 e-All-in-one printer) in January, 2015. The printer functioned properly - copy, fax, and scan, until two days ago. Now, it does not print at all. Received an error code: "0xc19a0013" (Missing or Failed Printhead). An expanded version of the error code reads: "The Printhead appears to be missing, not detected, or incorrectly installed. Error Code: 0xc19a0013. The printer uses a removable printhead, HP Ink Cartridges 950 (black) and 951(cmy). I have used HP Support Troubleshooting recommendations: all software and firmware for this printer is installed; the HP ink cartridges are not low or empty; removed the ink cartridges from the printhead and reinstalled them.
There are multible steps in the troubleshooting recommendation, but I stopped at removing the printhead. Because of my technical inexperience, and there were too many ceveats (beware, caution, proper reinstallation, and etc.) with removing the printhead that could cause greater problems. So, I stopped at removing and cleaning the printhead. Also, used the HP Printer Scan Doctor for assistance. The tool for cleaning the printhead doesn't work. What troubles me most with the 0xc19a0013 error code is its explanation: The printhead appears to be missing, not detected, or incorrectly installed. I can use all the help I can get to understand what is going on with the error code that I have received, and how to resolve the malfunctioning printer.
This question was solved.
View Solution.

Contact HP technical support at 800-474-6836 for more options.
If you live outside the US/Canada Region, please click the link below to get the support number for your region.
Country-language selector.
Please mark the post that solves your issue as "Accept as Solution".
If my answer was helpful click the “Thumbs Up" on the left to say “Thanks”!
I am not a HP employee.

Windows Server 2012 Windows Backup failed with following error code '0x8078006B' (Windows Backup failed to create the shared protection point on the source volumes.).

The Volume Shadow Copy service initially was running under the context of System, so we thought that ‘System’ doesn’t have permissions to access network shares.
When the Volume Shadow Copy service was running under the context of System, this was the error logged:
“failed with following error code '0x8078014B' (There was a failure in creating a directory on the backup storage location.).”
Which is likely due to not having permissions to write to the network location.
This is a scheduled backup trying to write to a network location, so we changes the service to run under the context of an account that does have permissions to write to the network share.
  Then the error changed to this:
“failed with following error code '0x8078006B' (Windows Backup failed to create the shared protection point on the source volumes.).”
HRESULT 0x8078006b
DetailedHRESULT 0x8004230f
ErrorMessage %%2155348075
BackupState 12
VolumesInfo <VolumeInfo><VolumeInfoItem Name="C:" OriginalAccessPath="C:" State="15" HResult="-2139619228" DetailedHResult="0" PreviousState="0" IsCritical="1" IsIncremental="0"
BlockLevel="0" HasFiles="1" HasSystemState="0" IsCompacted="0" IsPruned="0" IsRecreateVhd="0" FullBackupReason="0" DataTransferred="0" NumUnreadableBytes="0" TotalSize="0"
TotalNoOfFiles="0" Flags="1604" BackupTypeDetermined="0" SSBTotalNoOfFiles="0" SSBTotalSizeOnDisk="0" /><VolumeInfoItem Name="D:" OriginalAccessPath="D:" State="15" HResult="-2139619228"
DetailedHResult="0" PreviousState="0" IsCritical="0" IsIncremental="0" BlockLevel="0" HasFiles="1" HasSystemState="0" IsCompacted="0" IsPruned="0" IsRecreateVhd="0"
FullBackupReason="0" DataTransferred="0" NumUnreadableBytes="0" TotalSize="0" TotalNoOfFiles="0" Flags="68" BackupTypeDetermined="0" SSBTotalNoOfFiles="0" SSBTotalSizeOnDisk="0"
/></VolumeInfo>
We aren’t really seeing anything that gives any hint on what the issue is.
Any ideas? Thanks in advance!

We are trying to back up folders/files from 2 local drives (C: & D:), both of which have only 10% space used, and 100 GB free.
We are attempting to back the files up to a Remote Shared File (and there is 100+ GB free space out there).
  If we try another network location, we receive the exact same error.
This is Windows Server 2012, not running Hyper-V and is a physical server not a VM.
Thank you for the link.
Looking in:
Event Viewer / Application and Service Logs / Microsoft / Windows / Backup / Operational
But it doesn’t seem to give any more details:
Log Name:
Microsoft-Windows-Backup
Source:
Microsoft-Windows-Backup
Date:
7/8/2013 8:00:12 PM
Event ID:
5
Task Category: None
Level:
Error
Keywords:
User:
SYSTEM
Computer:
servername.edu
Description:
The backup operation that started at '‎2013‎-‎07‎-‎09T02:00:06.273000000Z' has failed with following error code '0x8078006B' (Windows Backup failed to create the shared protection point on the source volumes.).
Please review the event details for a solution, and then rerun the backup operation once the issue is resolved.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-Backup" Guid="{1DB28F2E-8F80-4027-8C5A-A11F7F10F62D}" />
<EventID>5</EventID>
<Version>3</Version>
<Level>2</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x4000000000000000</Keywords>
<TimeCreated SystemTime="2013-07-09T02:00:12.872602100Z" />
<EventRecordID>30</EventRecordID>
<Correlation />
<Execution ProcessID="3028" ThreadID="3996" />
<Channel>Microsoft-Windows-Backup</Channel>
<Computer>servername.edu</Computer>
<Security UserID="S-1-5-18" />
</System>
<EventData>
<Data Name="BackupTemplateID">{A421E864-A115-4288-8D12-F4878CF8A248}</Data>
<Data Name="HRESULT">0x8078006b</Data>
<Data Name="DetailedHRESULT">0x8004230f</Data>
<Data Name="ErrorMessage">%%2155348075</Data>
<Data Name="BackupState">12</Data>
<Data Name="BackupTime">2013-07-09T02:00:06.273000000Z</Data>
<Data Name="BackupTarget">\\servername\BACKUP</Data>
<Data Name="NumOfVolumes">2</Data>
<Data Name="VolumesInfo"><VolumeInfo><VolumeInfoItem Name="C:" OriginalAccessPath="C:" State="15" HResult="-2139619228" DetailedHResult="0" PreviousState="0" IsCritical="1" IsIncremental="0" BlockLevel="0" HasFiles="1" HasSystemState="0"
IsCompacted="0" IsPruned="0" IsRecreateVhd="0" FullBackupReason="0" DataTransferred="0" NumUnreadableBytes="0" TotalSize="0" TotalNoOfFiles="0" Flags="1604" BackupTypeDetermined="0" SSBTotalNoOfFiles="0" SSBTotalSizeOnDisk="0" /><VolumeInfoItem
Name="D:" OriginalAccessPath="D:" State="15" HResult="-2139619228" DetailedHResult="0" PreviousState="0" IsCritical="0" IsIncremental="0" BlockLevel="0" HasFiles="1" HasSystemState="0" IsCompacted="0" IsPruned="0" IsRecreateVhd="0" FullBackupReason="0" DataTransferred="0"
NumUnreadableBytes="0" TotalSize="0" TotalNoOfFiles="0" Flags="68" BackupTypeDetermined="0" SSBTotalNoOfFiles="0" SSBTotalSizeOnDisk="0" /></VolumeInfo></Data>
<Data Name="SourceSnapStartTime">2013-07-09T02:00:06.289250300Z</Data>
<Data Name="SourceSnapEndTime">1601-01-01T00:00:00.000000000Z</Data>
<Data Name="PrepareBackupStartTime"><TimesList><Time Time="1601-01-01T00:00:00.000Z" /><Time Time="1601-01-01T00:00:00.000Z" /></TimesList></Data>
<Data Name="PrepareBackupEndTime"><TimesList><Time Time="1601-01-01T00:00:00.000Z" /><Time Time="1601-01-01T00:00:00.000Z" /></TimesList></Data>
<Data Name="BackupWriteStartTime"><TimesList><Time Time="1601-01-01T00:00:00.000Z" /><Time Time="1601-01-01T00:00:00.000Z" /></TimesList></Data>
<Data Name="BackupWriteEndTime"><TimesList><Time Time="1601-01-01T00:00:00.000Z" /><Time Time="1601-01-01T00:00:00.000Z" /></TimesList></Data>
<Data Name="TargetSnapStartTime">1601-01-01T00:00:00.000000000Z</Data>
<Data Name="TargetSnapEndTime">1601-01-01T00:00:00.000000000Z</Data>
<Data Name="DVDFormatStartTime"><TimesList></TimesList></Data>
<Data Name="DVDFormatEndTime"><TimesList></TimesList></Data>
<Data Name="MediaVerifyStartTime"><TimesList></TimesList></Data>
<Data Name="MediaVerifyEndTime"><TimesList></TimesList></Data>
<Data Name="BackupPreviousState">2</Data>
<Data Name="ComponentStatus"><ComponentStatus></ComponentStatus></Data>
<Data Name="ComponentInfo"><ComponentInfo></ComponentInfo></Data>
<Data Name="SSBEnumerateStartTime">1601-01-01T00:00:00.000000000Z</Data>
<Data Name="SSBEnumerateEndTime">1601-01-01T00:00:00.000000000Z</Data>
<Data Name="SSBVhdCreationStartTime">1601-01-01T00:00:00.000000000Z</Data>
<Data Name="SSBVhdCreationEndTime">1601-01-01T00:00:00.000000000Z</Data>
<Data Name="SSBBackupStartTime">1601-01-01T00:00:00.000000000Z</Data>
<Data Name="SSBBackupEndTime">1601-01-01T00:00:00.000000000Z</Data>
<Data Name="SystemStateBackup"><SystemState IsPresent="0" HResult="0" DetailedHResult="0" /></Data>
<Data Name="BMR"><BMR IsPresent="0" HResult="0" DetailedHResult="0" /></Data>
<Data Name="VssFullBackup">false</Data>
<Data Name="UserInputBMR">false</Data>
<Data Name="UserInputSSB">false</Data>
<Data Name="BackupSuccessLogPath">
</Data>
<Data Name="BackupFailureLogPath">
</Data>
<Data Name="EnumerateBackupStartTime"><TimesList><Time Time="1601-01-01T00:00:00.000Z" /><Time Time="1601-01-01T00:00:00.000Z" /></TimesList></Data>
<Data Name="EnumerateBackupEndTime"><TimesList><Time Time="1601-01-01T00:00:00.000Z" /><Time Time="1601-01-01T00:00:00.000Z" /></TimesList></Data>
<Data Name="PruneBackupStartTime"><TimesList><Time Time="1601-01-01T00:00:00.000Z" /><Time Time="1601-01-01T00:00:00.000Z" /></TimesList></Data>
<Data Name="PruneBackupEndTime"><TimesList><Time Time="1601-01-01T00:00:00.000Z" /><Time Time="1601-01-01T00:00:00.000Z" /></TimesList></Data>
<Data Name="BackupFlags">0x9</Data>
<Data Name="ComponentInfoSummary"><ComponentInfoSummary ComponentInfoArrayPresent="1" TotalComponents="0" SucceededComponents="0" /></Data>
</EventData>
</Event>

Error in Webservice Call HTTP error (return code 404, message conn failed)

Hi
We wish to call a standard EP7 webservice through ABAP.
When we try to create consumer proxy , we get the following error.
HTTP error (return code 404, message "conn failed")
Message no. SPRX090
==> Display Error Document
If you want to generate a proxy for an external WSDL document by specifying a URL, check that the proxy settings of the system are correct (transaction SICF - Client - Proxy Settings). If you want to generate a proxy for an XI Repository object, check the connection to the Enterprise Services Builder as follows:
Check List for Setting Up a Connection to the Service Repository
1. The address of the Enterprise Services Repository must be known in the SAP system
Check with report SPROX_CHECK_IFR_ADDRESS
The address is taken from the following parameters in the exchange profile ('Connections' section):
com.sap.aii.connect.repository.name: Server (for example,pwdf0436)
com.sap.aii.connect.repository.httpport: Port (for example, 1080)
com.sap.aii.connect.repository.contextroot: Root (for example,rep)
The logon data is also read from the exchange profile ('ApplicationSystem' section):
com.sap.aii.applicationsystem.serviceuser.name: User
com.sap.aii.applicationsystem.serviceuser.pwd: Password
As an alternative to using the exchange profile, you can maintain the RFC destination SAP_PROXY_ESR. If this RFC destination is maintained it will be used by the proxy generation in place of data from the exchange profile to access the Service Repository. In this case, the Exchange Profile will even not be read.
The RFC destination has to be set up using transaction SM59 and should look like this:
RFC Destination: SAP_PROXY_ESR
Connection Type: G (HTTP Connection to External Serv)
Description1: ESR for Proxy Generation
Target Host: esr_host
Service No: 1080
Path Prefix: rep
Logon and Security:
Basic Authentication: active
User: esr_user
Password: esr_password
2. The HTTP Framework of the Web Application Server must function
Check with report SPROX_CHECK_HTTP_COMMUNICATION
If necessary, contact your system administrator. Please be aware of the fact, that the HTTP framework is depending on the application server. Thus the result of the report may differ for different application servers.
3. Proxy generation must interpret the data of the Enterprise Services Repository correctly
Check with report SPROX_CHECK_IFR_RESPONSE
you can also login in dev and go to Xn se91
enter msg id SPRX and msg no 090
select the message and click on long text..
you get the same message in a formatted manner..
How to get rid of this ?
Regards
Rajendra

Hi
we have given the correct path as we have tested the webserive from
other technology (.net) by providing the same path.
regards
Rajendra

The request to execute code in the sandbox failed

I have developed a webpart for a client which is hosted on
O365.
While saving the webpart properties I am Getting the error"Web Part Error: The request to execute code in the sandbox failed."
The same web part works on a different O365 site perfectly fine.

Try below article
http://social.msdn.microsoft.com/Forums/sharepoint/en-US/70b13a7f-c9f8-4bf9-8229-670472959e60/web-part-error-sandboxed-code-execution-request-failed?forum=sharepointdevelopmentprevious

T-code to edit the name of company

T-code to edit the name of company-
I have a smartform which picks the name of a company. But it is too long.
I want to edit the company name so that is is shown in the form.

Hi Malvika,
if company name is too big than you can use split command in your code to split company name and display in smartform.
Examples
DATA: NAMES(30) TYPE C VALUE 'Charly, John , Peter',
NAMES2 TYPE STRING,
ONE(10) TYPE C,
TWO(10) TYPE C,
THREE TYPE STRING,
FOUR(4) TYPE C VALUE 'FOUR',
DELIMITER(2) VALUE ','.
SPLIT NAMES AT DELIMITER INTO ONE TWO.
ONE contains 'Charly' and TWO contains 'John , Pet'.
SY-SUBRC is 4, because TWO was not large enough to
accommodate the whole of the remaining string
SPLIT NAMES AT ',' INTO ONE TWO THREE.
ONE contains 'Charly', TWO contains ' John',
THREE contains ' Peter'.
SPLIT NAMES AT ', ' INTO ONE THREE TWO.
ONE contains 'Charly', THREE contains 'John',
TWO contains 'Peter'.
CONCATENATE NAMES '' INTO NAMES2 SEPARATED BY SPACE.
SPLIT NAMES2 AT DELIMITER INTO ONE TWO THREE FOUR.
ONE contains 'Charly', TWO contains 'John',
THREE contains 'Peter ', FOUR is empty.
SPLIT NAMES2 AT DELIMITER INTO ONE FOUR THREE.
ONE contains 'Charly', FOUR contains 'John',
THREE contains 'Peter', SY-SUBRC is 4, since
FOUR was not large enough (spaces are significant
characters!)
Thanks
Ankur Sharma

I have a problem with buying apps in itunes Store. When you purchase the application fails payment. Asked to update the map. I have 2 credit cards with a positive balance. In what could be the reason?

I have a problem with buying apps in itunes Store.
When you purchase the application fails payment.
Asked to update the map.
I have 2 credit cards with a positive balance.
In what could be the reason?

contact itunes support

Creating a validation (OB28) for t.code FBZG and the doc. type

Hi All,
I've created a validation:
Prerequisite:   SYST-TCODE = 'FBZG'
Check:           BKPF-BLART = 'IN'
It doesn't work ...
The t.code FBZG is linked to the program RFBITB01: should I indicate, in the validation, the name of this program instead of the t.code? Which abap code should I use in this case?
Could anyone help me?
Thanks
Gandalf

HI,
    The Tcode for executing a transaction is (in FI) rarely the required Syst-Tcode.
Make a Posting through FBZG, and then check the document header for the actual Transaction used.
Use this as your Syst-tcode, but be aware that this will validate all postings using this code and not just FBZG.
Kind regards

T-code F-28 (Post Incoming Payments) - only 16 lines to enter invoice doc

Hope someone can help me on the following issue:
Issue is pertaining to t-code F-28 (Post Incoming Payments). There are only 16 lines for user to enter invoice documents when we select Document Number for the Additional Selection. For some cases, we do need to enter more than 16 lines.
Question:
1. Anyway to increase number of lines for user to enter invoice documents
2. Any workaround if the number of lines cannot be increased.
Thank you very much.
Wilson

Hi,
That is standard SAP screen defination.
You can use "Page Down" button to enter additional 16 document numbers and so on. Or can give the document numbers in ranges.
If you have a huge list of invoice numbers to be given which can not be met by above, then you need to develop a custom program to call BDC or BAPI_ACC_DOCUMENT_POST
Regards,
Gaurav

Sample code to edit master detail records

Hi,
Could anybody please sned me the sample code to edit master and detail records.
Thanks,
Kavitha

Arjuna,
Thanks for your reply. Unfortunately the 'switcher' code which makes an attribute editable, works on a 'Read-Only table' page but not on 'Master-Detail table' page. The switcher code is:
<switcher childName="${uix.current.RowID.inputValue == bindings.RowID.inputValue ? 'selected' : 'notselected'}">
<case name="selected">
<textInput model="${bindings.RequestedBudget}" columns="14" readOnly="false"/>
</case>
<case name="notselected">
<textInput model="${uix.current.RequestedBudget}" columns="10" readOnly="true"/>
</case>
</switcher>
We do have individual bindings for all table attributes. Any suggestions will be much appreciated.
Thanks, Ali.

IPhoto 11 - Edit tools fail after initial use of program

Running 10.6.8 (all updates complete) on new MacBook. Began editing newly imported photos - edit features failed after first 50 photos. I have tried...
* updated all Mac Software
* deleted user iPhoto preferences, emptied trash, reopened
* repaired iPhoto library, etc....
Has this happened to anyone else? Any suggestions for repair/recovery?

Try this: launch iPhoto with the Option key held down and create a new, test library. Import some photos and check to see if the same problem persists. If it does then a reinstall of iPhoto seems warranted. To do so you'll have to delete the current application and all files with "iPhoto" in the file name with either a .PKG or .BOM extension that reside in the HD/Library/Receipts folder and from the /var/db/receipts/ folder,
Click to view full size
Then install iPhoto from the disk it came on originally.
OT

T.code FBZG: editing of failed payment trans .. Client 400 has state not ..

Similar Messages

Maybe you are looking for