T.code FEBC: setting the report RFEBIT00, by default.

Hi All,
when I launch the t.code FEBC, SAP provides me a list of report among which I've to choose the one I need.
But the list doesn't contain the report RFEBIT00..... How to add it to the list?
Thanks
Gandalf

Hi Wolfgang
I've been looking this table and i have here standar tcodes pointing to Z programs for example:
FF.5--> ZRFEBKA00
So maybe you know if there is any other tables like this where you can customize tcodes to run with Z programs.
Thanks in advance.
Regards
Alvaro

Similar Messages

  • T.code FEBC: the repport list doesn't contain the report RFEBIT00

    Hi All,
    when I launch the t.code FEBC, SAP provides me a list of report among which I've to choose the one I need.
    But the list doesn't contain the report RFEBIT00..... How to add it to the list?
    Thanks
    Gandalf

    Hi,
    Please do coordinate with your technical consultant(ABAP) for the reolution.

  • How to set the report path in a model plugin

    I am trying to figure out how to set the report path in a process model plug-in. I can seem to figure out how to get access to it. It seems like this would be a reasonable thing to do since the plug-ins are for results processing. Does anyone know how to do this? We typically use the Sequential process model but I am trying to keep my plug-in as independent of that as possible. 
    Thanks.
    Solved!
    Go to Solution.

    If I understand, you want your plug-in, when enabled, to alter the settings of any other instances of the NI report plug-in such that their reports share the same directory as your plug-in is configured to use.
    If so, your plug-in can access and modify the settings of all other plug-in instances. All instances are passed to all plug-in entries point in the plugins array sub-property of the ModelConfiguration parameter. You can iterate through this array. Any element of the array with a Base.SequenceFilename equal to "NI_ReportGenerator.seq" is an instance of the NI report plug-in. Its report options are stored in the element under PluginSpecific.Options.
    You can change the report options to what ever you want. Note that the ReportOptions model callback is called from the Initialize model-plugin entry point, so you might want to ensure that your changes are applied after that, so they aren't overwritten. To do that, you could make your changes in the the Initialize entry point of your plug-in, and ensure that your plugin runs last. To make it run last, you could set the FileGlobals.ModelPluginComponentDescription.Default.Base.RunOrder in your plug-in file to a value greater than 0, such as 1.0 (see TestStand Help>>Fundamentals>>Process Model Architecture>>Process Model Plug-in Architecture>>Structure of Plug-in Sequence Files>>Model Plug-in Entry Points>>Order of Entry Point Execution at Run Time).

  • T-code to see the report generated by a Report Writer.

    Hi,
    I  am new to report writer and need your help.
    I have a output which is generated  through a report writer.
    I need to compare the code that generated this output in development and production systems.
    The only information I have is  the library name and a z report name which gives the output.(throgh t-code GR33)
    But when I try to execute the same report in Se 38, it says that te report does not exists .
    Please suggest what is the t-code to see the report generated by a report writer , so that I can compare the codes in different systems.
    Thanks,
    Suchi.

    Hi,
    Thanks for the replies.
    The actual issue is :
    I have  a report created by report writer in 2 languages in Chineese and in English.
    In the selection screen of the chineese report some of the labels are missing.
    It is getting printed as ####### instead of fiscal year , Period etc.
    This is happening only in production while in the development system it is correct (Both the chineese and the English selection screen ).
    I guess this is a transportation issue.
    Please suggest.
    I am ot able to see the Transport Requests associated with it .
    Can you please guide me for the same.
    Where can I see the TRs associated with this report.

  • How to write the code to send the report output to the local file.

    dear all,
    how to write the code to send the report output to the local file.
    Thanks & Regards,
    Jyothi.

    Hi,
    Try this , it will display report and download the file as well. Just vhange the path and execute
    TYPE-POOLS : SLIS.
    DATA : IT_SCARR TYPE TABLE OF SCARR,
           IT_FCAT  TYPE SLIS_T_FIELDCAT_ALV.
    SELECT *
    FROM SCARR
    INTO TABLE IT_SCARR.
    CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
    EXPORTING
    *   I_PROGRAM_NAME               =
    *   I_INTERNAL_TABNAME           =
        I_STRUCTURE_NAME             = 'SCARR'
    *   I_CLIENT_NEVER_DISPLAY       = 'X'
    *   I_INCLNAME                   =
    *   I_BYPASSING_BUFFER           =
    *   I_BUFFER_ACTIVE              =
      CHANGING
        CT_FIELDCAT                  = IT_FCAT
    * EXCEPTIONS
    *   INCONSISTENT_INTERFACE       = 1
    *   PROGRAM_ERROR                = 2
    *   OTHERS                       = 3
    IF SY-SUBRC <> 0.
    * MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
    *         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
    EXPORTING
    *   I_INTERFACE_CHECK              = ' '
    *   I_BYPASSING_BUFFER             =
    *   I_BUFFER_ACTIVE                = ' '
    *   I_CALLBACK_PROGRAM             = ' '
    *   I_CALLBACK_PF_STATUS_SET       = ' '
    *   I_CALLBACK_USER_COMMAND        = ' '
    *   I_STRUCTURE_NAME               =
    *   IS_LAYOUT                      =
       IT_FIELDCAT                    = IT_FCAT
    *   IT_EXCLUDING                   =
    *   IT_SPECIAL_GROUPS              =
    *   IT_SORT                        =
    *   IT_FILTER                      =
    *   IS_SEL_HIDE                    =
    *   I_DEFAULT                      = 'X'
    *   I_SAVE                         = ' '
    *   IS_VARIANT                     =
    *   IT_EVENTS                      =
    *   IT_EVENT_EXIT                  =
    *   IS_PRINT                       =
    *   IS_REPREP_ID                   =
    *   I_SCREEN_START_COLUMN          = 0
    *   I_SCREEN_START_LINE            = 0
    *   I_SCREEN_END_COLUMN            = 0
    *   I_SCREEN_END_LINE              = 0
    *   IR_SALV_LIST_ADAPTER           =
    *   IT_EXCEPT_QINFO                =
    *   I_SUPPRESS_EMPTY_DATA          = ABAP_FALSE
    * IMPORTING
    *   E_EXIT_CAUSED_BY_CALLER        =
    *   ES_EXIT_CAUSED_BY_USER         =
      TABLES
        T_OUTTAB                       = IT_SCARR
    * EXCEPTIONS
    *   PROGRAM_ERROR                  = 1
    *   OTHERS                         = 2
    IF SY-SUBRC <> 0.
    * MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
    *         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    CALL METHOD CL_GUI_FRONTEND_SERVICES=>GUI_DOWNLOAD
      EXPORTING
    *    BIN_FILESIZE              =
        FILENAME                  = 'C:\Documents and Settings\sap\Desktop\Hi.xls' " Change path
    *    FILETYPE                  = 'ASC'
    *    APPEND                    = SPACE
    *    WRITE_FIELD_SEPARATOR     = SPACE
    *    HEADER                    = '00'
    *    TRUNC_TRAILING_BLANKS     = SPACE
    *    WRITE_LF                  = 'X'
    *    COL_SELECT                = SPACE
    *    COL_SELECT_MASK           = SPACE
    *    DAT_MODE                  = SPACE
    *    CONFIRM_OVERWRITE         = SPACE
    *    NO_AUTH_CHECK             = SPACE
    *    CODEPAGE                  = SPACE
    *    IGNORE_CERR               = ABAP_TRUE
    *    REPLACEMENT               = '#'
    *    WRITE_BOM                 = SPACE
    *    TRUNC_TRAILING_BLANKS_EOL = 'X'
    *  IMPORTING
    *    FILELENGTH                =
      CHANGING
        DATA_TAB                  = IT_SCARR
    *  EXCEPTIONS
    *    FILE_WRITE_ERROR          = 1
    *    NO_BATCH                  = 2
    *    GUI_REFUSE_FILETRANSFER   = 3
    *    INVALID_TYPE              = 4
    *    NO_AUTHORITY              = 5
    *    UNKNOWN_ERROR             = 6
    *    HEADER_NOT_ALLOWED        = 7
    *    SEPARATOR_NOT_ALLOWED     = 8
    *    FILESIZE_NOT_ALLOWED      = 9
    *    HEADER_TOO_LONG           = 10
    *    DP_ERROR_CREATE           = 11
    *    DP_ERROR_SEND             = 12
    *    DP_ERROR_WRITE            = 13
    *    UNKNOWN_DP_ERROR          = 14
    *    ACCESS_DENIED             = 15
    *    DP_OUT_OF_MEMORY          = 16
    *    DISK_FULL                 = 17
    *    DP_TIMEOUT                = 18
    *    FILE_NOT_FOUND            = 19
    *    DATAPROVIDER_EXCEPTION    = 20
    *    CONTROL_FLUSH_ERROR       = 21
    *    NOT_SUPPORTED_BY_GUI      = 22
    *    ERROR_NO_GUI              = 23
    *    others                    = 24
    IF SY-SUBRC <> 0.
    * MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
    *            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    CALL METHOD CL_GUI_FRONTEND_SERVICES=>EXECUTE
      EXPORTING
        DOCUMENT               = 'C:\Documents and Settings\sap\Desktop\Hi.xls' "Change path
    *    APPLICATION            =
    *    PARAMETER              =
    *    DEFAULT_DIRECTORY      =
    *    MAXIMIZED              =
    *    MINIMIZED              =
    *    SYNCHRONOUS            =
    *    OPERATION              = 'OPEN'
    *  EXCEPTIONS
    *    CNTL_ERROR             = 1
    *    ERROR_NO_GUI           = 2
    *    BAD_PARAMETER          = 3
    *    FILE_NOT_FOUND         = 4
    *    PATH_NOT_FOUND         = 5
    *    FILE_EXTENSION_UNKNOWN = 6
    *    ERROR_EXECUTE_FAILED   = 7
    *    SYNCHRONOUS_FAILED     = 8
    *    NOT_SUPPORTED_BY_GUI   = 9
    *    others                 = 10
    IF SY-SUBRC <> 0.
    * MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
    *            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.

  • What is the transaction code to set the download directory?

    What is the transaction code to set the download directory?

    SO21 is the Maintain PC Work directory transaction
    Cheers,
    Ben

  • Is there a way in Captivate to set the reporting for a quiz so it saves/keeps the highest score

    Is there a way in Captivate to set the reporting for a quiz so it saves/keeps the highest score despite how many attempts a user takes?

    There is currently no built-in functionality to do this in Captivate. 
    If you are using an LMS, this sort of thing is normally handled there.   For example in Moodle there is an option to use the highest score out of all attempts on a course.

  • [svn:osmf:] 15984: FM-848: adding unit test that holds the code to reproduce the reported bug.

    Revision: 15984
    Revision: 15984
    Author:   [email protected]
    Date:     2010-05-10 05:50:23 -0700 (Mon, 10 May 2010)
    Log Message:
    FM-848: adding unit test that holds the code to reproduce the reported bug.
    Ticket Links:
        http://bugs.adobe.com/jira/browse/FM-848
    Modified Paths:
        osmf/trunk/framework/OSMFTest/org/osmf/elements/compositeClasses/TestCompositeMetadata.as

    My apologies about the wall of text. After I made my original post, I thought maybe it would better to go back and put it in a pastebin instead. I was not able to edit that post once I sent it.
    In regards to your question, the  permissions on the
    /Library/LaunchAgents/com.adobe.AAM.Updater-1.0.plist file is "read and write" for system, wheel and everyone.

  • Setting the Report's Previewer title programtically

    Hi All, I am using Reports 6 and I want to set the Report's previewer title dynamically with PL/SQL.
    Thank you

    Hi Alfred
    You can only set the Previewer Title from the Property Palette.
    Regards
    Sripathy

  • Can I set the Ipad 2 to default to wifi?

    Can I set the Ipad 2 to default to wifi?

    It is set that way by default, if it finds a trusted WiFi site it will connect with it.
    If it goes to sleep the WiFi connection will be cut. If 3G is on and a push notification or email is received it will be via 3G.

  • How do I set the settings back to default?

    Inherited my photoshop from previous employee.  How do I set the settings back to default like the keyboard shortcuts and anything else in the preferences?  Would like to do this without reinstal as finding the original disc will probably be a hassle.
    Thanks

    you can reset the Photoshop preferences in the following way
    Windows: Shift + Ctrl + Alt
    Mac: Shift + Command + Option
    Hold down the above keyboard combinations while starting photoshop.
    You will be asked if you want to reset preferences -answer yes.
    Cheers
    John

  • The Outlook links do not connect to Firefox even after setting the customize option in Default Programs. Please help.

    The''' Outlook links do not connect to Firefox '''even after setting the customize option in Default Programs. Please help.

    Message to Toad-Hall
    Thank you, for that. To be sure, I tried your suggestion, and selected "System Proxy" as the choice, for Thunderbird and Firefox. Rebooted, and looked at the outcome.. NO Joy.. :-(
    I believe that I shall send the output of the Error Log in my next post. Perhaps someone can point me in the right direction after looking at the Error.log.
    Thank you...Toad Hall. If you think of something else to try, I am ALL ears.. I shall keep trying..

  • Setting the 'reportable' flag for a very large ODS

    Hello Community,
    I am working on a very large BW system (6 Tb), and we recently have the need to set the 'BEx Reporting' flag on some very large ODS objects.
    It was my impression that setting this flag would be easy to do.  But the transport that contains this flag for six large ODS objects has already been running for more than 16 hours.
    Can you tell me, what actually happens in the database when the 'BEx Reporting' flag is turned on for an ODS ?
    Thanks !
    Keith

    Hello Bhanu,
    Thanks for the quick response.  Are you able to provide some more information ?
    are the SID values created in a new SID table ?
    if the ODS was already very large, then would you expect the new SID table to also be very large ?
    what about the case if a SID value already exists for the characteristic ?
    Thank you !
    Keith

  • Seeking for VB code to run the report conect to ODBC system DSN

    I use the VBcode to run the CR report from VB application.
    Works great when the report connect to mdb through DAO engine..
    Set CrxReport = apps.OpenReport(App.Path & "/" & Reportfile & ".rpt")
    CrxReport.Database.Tables(1).ConnectionProperties.Item("Database Password") = "syspass"
    Now I make my report connect Access 2007 through System DSN in ODBC.
    Set CrxReport = apps.OpenReport(App.Path & "/" & Reportfile & ".rpt")  -- works.
    CrxReport.Database.Tables(1).ConnectionProperties.Item("Database Password") = "syspass"
    -- Get Crystal error-214726270.
      Any help?
    Many Thanks!
    Daphne

    Moved to Legacy SDK forum.
    Need more info. What version of CR and which report engine are you using?
    Thank you
    Don

  • Setting the report layout for HTML format

    hi friends
    when I generate my report to HTML file and open it to Internet Explorer it disturbs the actual report little bit like enlarging the fonts, hiding some graphical objects like Lines and wrapping the report. so can u tell me that how can I take the same output format in Internet Explorer as in reports previewer? I'm using Reports 6i and Micrsoft Internet Explorer 6.0. thanx.

    I think you should make some modification into main section
    e.g. increase height and width of the report....and then see...
    I had same problem with text output but this method solve my problem hope
    this will help u...
    Enjoy Oracle...

Maybe you are looking for