T-Code for how to check depriciation month wise

Hi,
Please provide a T-Code or information how to check depriciation month wise and asset wise on a monthly basis.
Thanks..

Thanks for reply...
My Requirement is this:----
Suppose My Asset value is 50,00,000 in march 2009 and in April 2009, it is 30,00,000 (below 20,00,000 from March)...we are unable to identify, how that huge diff. comes in it... and in May it is 32,00,000 (only 2,00,000 diff.)...
So, we want to examine that diff. b/w March and April months....
How can we check the depreciation month wise.....
regards....

Similar Messages

Code for how to read an integer array from the command prompt...

hello,
Could anyone give me the code for how to read an integer array from the command prompt...its very urgent!..

If you are using a recent version of Java (5 or later) you can use Scanner:
http://java.sun.com/javase/6/docs/api/java/util/Scanner.html
That page has some example code on it, too.

How to find the month wise Overall result

Hi,
calculating share percentage of order quantity based on Overal result.
if given the fiscal period range in the variable(for ex 001.2006 to 009.2006) Overall result considering sum of all Order quantity data between this range.
But need to calculate share percentage based on month wise in this fiscal period range,for this regard should consider the sum of overal result in month wise.
How to calculate the month wise overall result?
regards,
Hari.

Hi Hari,
You need to enable the results row for your Month char in the query. Then use a new formula with the function %CT to get the percentage share of individual values wrt to overall result of that month.
Hope this helps...

Is there a noka code for lumia to check life timer...

In symbian we use to check life time using *#92702689# to see how many hours we have spoken on the phone. is there a similar code for lumias? i have lumia 900.

93tid wrote:
##634# does the job on a 920, not sure about Lumia 900.
Whilst this code will access "Diagnostics" tests upon 900, think that this is limited to:-
Accelerometer
ALS
Audio Loopback
Bluetooth
Camera
Battery Status
DTMF
Hardware Buttons
Headset Detection
LCD White
Lights
Magnetometer
Power Source
Proximity
Speaker
Touch
Vibra
Happy to have helped forum with a Support Ratio = 42.5

How to write the dynamic code for RadioGroupByKey and Check Boxes?

Hi,
Experts,
I have created a WD ABAP application in that i have used RadioGroupByKey and CheckBox Ui elements but i want how to write the dynamic code to that i want to display male and female to RadioGroupByKey and 10 lables to check boxs.
Please pass me some idea on it and send any documents on it .
Thanks in advance ,
Shabeer ahmed.

Refer this for check box:
Do check :
bind_checked property is bind to a node with cardinality of 1:1
CHECK_BOX_NODE <---node name
-CHECK_BOX_VALUE <--attribute name of type wdy_boolean
put this code under your WDDOMODIFYVIEW:
DATA:
lr_container TYPE REF TO cl_wd_uielement_container,
lr_checkbox TYPE REF TO cl_wd_checkbox.
get a pointer to the RootUIElementContainer
lr_container ?= view->get_element( 'ROOTUIELEMENTCONTAINER' ).
lr_checkbox = cl_wd_checkbox=>new_checkbox(
text = 'WD_Processor'
bind_checked = 'CHECK_BOX_NODE.CHECK_BOX_VALUE'
view = view ).
cl_wd_matrix_data=>new_matrix_data( element = lr_checkbox ).
lr_container->add_child( lr_checkbox ).
Refer this for Radiobutton :
dynamic radio button in web dynpro abao
Edited by: Saurav Mago on Jul 17, 2009 10:43 PM

How to check remaining monthly phone use time?

I've had the iPhone a week but one thing I haven't quite figured out is the "usage amount level". iPhone checks email every so often, am I paying for this connection time? If so, can I change it to manual check? Where can I see how much time I have used? I have found call time, but is this separate to email / internet time? Hope you can help!

Hello Ben
If your using iPhone with AT&T you automatically get Unlimited Data, So you can never go over your data limit with the iPhone
The only things that have a Limitation on AT&T are SMS and Voice. For example the cheapest SMS package on AT&T is 200 SMS per month. But you get get Unlimited SMS for an extra $20
And of course voice is also limited based on your plan, And this can be upgraded if you feel you need more talk time.
If your not with AT&T then yes please consult your Cell provider to find out more info on how to pick a package that may suite your needs better.
And yes you can certainly tell Mail to Manually check to save on Data cost.
And yes Call time is different from Data.
I know on at&t if you dial *646# you get an SMS that tells you
*Min Remaining etc. To view current data usage *3282#
Keep in mind this data may not be 100% up to data when it comes in. So please access your Online account with your cell provider for possible up to date data reports, or Contact Cell Provider who may have a more up to data result.

Need help with API and sample code for checking a user's rights on a folder

Hi All,
I am working on an UCM integration where user supplies a folderpath (ucm folders), and a file is later uploaded to this location.
Since a user can provide a folderpath where he has only Read Access or no access at all, we are trying to work out a way to pre-check his permissions on the folder.
Since we have Entity Security enabled, we have 5 security fields to rely on Account, Security Group, User Access List, Group Access List, Role Access List.
Writing custom code for this security check is second on our agenda.
Firstly, we wish to know the API and sample code that typically performs this Security Check in UCM.
We could find intradoc.shared.SecurityUtils which has methods to check security on SGroup and Account, but we couldn't find anything for:
1) Overall security check
2) ACL security check on top of sgroup and account security check

Any ideas anyone?!
I am looking forward to some pointers here. :(

Need sample code for Using BADI ME_PROCESS_REQ_CUST

Dear all,
Initially my requirement is to Validate the Document Type of Purchase Request ion as per material.
I have created a implementation for BADI : ME_PROCESS_REQ_CUST .
im new to OOPS-ABAP, so pls send *sample code for how to use these methods PROCESS_ITEM,
like declarations, assignment of data into internal table for further validation*.
Regards,
NIranjan.G

Hi,
get the item data ....
     *DATA : lt_item TYPE MEREQ_ITEM,
                   ls_item liek line of it_item*
         CALL METHOD im_item->GET_DATA
           RECEIVING
             RE_DATA = lt_item .
you will get the data in lt_item.. table
Thanks,
Shailaja Ainala.

How to check deleted record in a table

Hi to all,
any one can do need ful to me for how to check last deleted record in a table.

Since you are on 8i,
AUDIT DELETE TABLE AUDIT
and Using LogMiner
are your best chance to find out last deleted records.
If you are on 9i and later, you can also use flashback query to join current table with table image few minutes back to find out the difference.

Required Outbound Process Code for MessageType LOIPRO (Basic type-LOIPRO01)

Hi EDI Gurus,
I need to know the outbound Process Code for MessageType LOIPRO (Basic type-LOIPRO01).

Hi,
there is no process code for MessageType LOIPRO .
check the below link u will get the clear idea.
Re: Process Code for Outbound Production Order??
Reward if helpful.
Regards,
Nagaraj

Process Code for Message Type LOIPRO(in ALE/IDOCS)

Hi all,
I have to implement Production order Interface(create Production order,change Production order etc).The requirement is for eg:,I created one production order and posted it;it should get reflected in the recieving system.Does anyone know the process code for LOIPRO.I checked it in we42,WE64 and even the tables TEDE1 and TEDE2.But its not available.Process code and function module is necessary to continue with WE20.
Thanking you in advance,
anjaly

Hi
it may sound like not good news, but I think the answer is described in OSS Note 198252 - Special features of POI message category LOI*.
There all LOI* idocs are mentioned and then they say:
The message categories named are part of the POI (Production Optimization interface) interface.This interface and the message categories contained in it were developed for the transfer to non-R/3 systems.Therefore, an inbound processing in the R/3 system is not planned.The message categories are transferred via separate transactions / reports of the POI interface (Transactions POIM, POIT).Functions which exceed these transactions are not supported.For this reason, the above-mentioned ALE functions cannot be used for the message categories described.
So, in short, there is no inbound process code for LOIPRO.
Inbound processing then should be done through self-developed programs / idocs, calling BAPI-s (for example).
Regards,
Joe
Edited by: Joseph Yasman on Jun 30, 2009 1:46 PM

Why am I suddenly getting this message from a page I have been using for 6 months(Error code: sec_error_unknown_issuer) how do I get my page back?

Why am I suddenly getting this message from a page I have been using for 6 months(Error code: sec_error_unknown_issuer) how do I get my page back?

Did you reset Firefox recently?
*https://support.mozilla.org/kb/reset-firefox-easily-fix-most-problems
If that is the case then you may have lost intermediate certificates that were stored in the cert8.db file in the Firefox profile folder.
Check out why the site is untrusted (see the Technical details) and if this is caused by a missing intermediate certificate then see if you can install this intermediate certificate from another source.
Some firewalls monitor secure (https) connections and send their own certificate instead of the website's certificate.
You can retrieve the certificate and check details like who issued certificates and expiration dates of certificates.
*Click the link at the bottom of the error page: "I Understand the Risks"
Let Firefox retrieve the certificate: "Add Exception" -> "Get Certificate".
*Click the "View..." button and inspect the certificate and check who is the issuer.
You can see more Details like intermediate certificates that are used in the Details pane.

How to Find unused programs / T-codes for the past three months

How to find the unused programs / transaction codes for the past three months,
I tried with the ST03 Transaction but it gives only the Tcodes, program used in last one monthu2026
Regards,
Purshoth

This depends on the data retention time (in days) maintained in your system. In ST03, on the right hand side, check "Collector" tab, under that "Performance Database" and then "Reorganization" which will give you the details retention times (in days).
Also please check the link http://inet.tamko.com:8081/saphelp/helpdata/EN/c4/3a68d5505211d189550000e829fbbd/frameset.htm for more details.
Thank You.

How to check the tran code for specific activity.

Hello friends ,
could you please let me know how to check the tran code for specific activity . AS in table , i can check , what transaction does what ? But now i need to check the transaction for specific activity .
E.g , For Administrator workbench , there is transcation like RSA1 .
thanks in advance
Regards

Hi,
try the TSTC table with SE16.
Hope it helps,
MG

How to check code for syntax errors

How do I check or validate my html code in dreamweaver. I wish to see if all the braces and tags are closed or not
please guide me

Hi There:
You can check to make sure the tags, parentheses (( )), braces ({ }), and square brackets ([ ]) in your page are balanced. Balanced means that every opening tag, parenthesis, brace, or bracket has a corresponding closing one, and vice versa.
Check for balanced tags
Open the document in Code view.
Place the insertion point in the nested code you want to check.
Select Edit > Select Parent Tag.
The enclosing matching tags (and their contents) are selected in your code. If you keep selecting Edit > Select Parent Tag, and your tags are balanced, eventually Dreamweaver will select the outermost html and /html tags.
Check for balanced parentheses, braces, or square brackets
Open the document in Code view.
Place the insertion point in the code you want to check.
Select Edit > Balance Braces.
All of the code between the enclosing parentheses, braces, or square brackets is selected. Choosing Edit > Balance Braces again selects all of the code inside the parentheses, braces, or square brackets that enclose the new selection.
And also make sure to validate your HTML code at - http://validator.w3.org/
Regards
Vinay

T-Code for how to check depriciation month wise

Similar Messages

Maybe you are looking for