T-code SEGW doesn't exist!!

Dear Experts,
I'm trying to access Netweaver Gateway Service Builder ( T-code : segw ) on my IDES but i get an information message that this transaction doesn't exist, but in DEV environment i can found it.
what should I do to get access to it on my IDES.
Thank you in advance.

Hai,
The netweaver gateway system must be having the required components like IW_FND & GW_CORE. Also a addon is required fir the Gateway builder to work.
SAP NW Gateway 2.0 system with SP04.
Thanks,
SK

Similar Messages

TypeError: Error #1010 on code that doesn't exist.

Hello all,
I have a drop down menu with 7 options. The menu is a movie clip with a mask that reveals each of the buttons when a person mouse_overs the menu button. Each menu option does the same thing, it will call a function based on the button clicked. The function for each button does the same thing:
function INDEX_Safety (e:MouseEvent):void
          play();
          INDEX_SAFETY=true;
          Sound_Stopper ();
Each of the functions will change the value of its respecive boolean variable. One for each button. Sound Stopper is a function that stops any FLV Sound that is currently playing.
When it goes through play() it will come to a particular frame that has:
Index_Jumper ();
this function determines which boolean has been set to true, and does a gotoAndPlay("Label Name") based on the boolean that has been set to true. Then sets the boolean back to false.
function Index_Jumper ():void
          if (INDEX_SAFETY==true){gotoAndPlay("Safety"); INDEX_SAFETY=false;}
          if (INDEX_TOOLS==true){gotoAndPlay("Tools and Positions"); INDEX_TOOLS=false;}
          if (INDEX_METHODS==true){gotoAndPlay("The Methods"); INDEX_METHODS=false;}
          if (INDEX_METHOD1==true){gotoAndPlay("Method 1"); INDEX_METHOD1=false;}
          if (INDEX_METHOD2==true){gotoAndPlay("Method 2"); INDEX_METHOD2=false;}
          if (INDEX_TDBL==true){gotoAndPlay("Installing TDBL"); INDEX_TDBL=false;}
          if (INDEX_RAISING==true){gotoAndPlay("Raising the Stand"); INDEX_RAISING=false;}
The issue i am having: When i click on the 6th option, TDBL, i get the error:
TypeError: Error #1010: A term is undefined and has no properties.
          at RaisingtheOperatorsPlatform_fla::MainTimeline/frame147()[RaisingtheOperatorsPlatform_fla. MainTimeline::frame147:10]
It says frame 147:10
From my understanding this means the 10th line on Frame 147.
This is my frame 147:
1. stop ();
2. Caption ();
3. IndexMC.Safety_Menu_Button.addEventListener(MouseEvent.CLICK, INDEX_Safety);
4. IndexMC.Tools_Menu_Button.addEventListener(MouseEvent.CLICK, INDEX_Tools);
5. IndexMC.Methods_Menu_Button.addEventListener(MouseEvent.CLICK, INDEX_Methods);
6. IndexMC.Method1_Menu_Button.addEventListener(MouseEvent.CLICK, INDEX_Method1);
7. IndexMC.Method2_Menu_Button.addEventListener(MouseEvent.CLICK, INDEX_Method2);
8. IndexMC.TBDL_Menu_Button.addEventListener(MouseEvent.CLICK, INDEX_Tdbl);
9. IndexMC.Raising_Menu_Button.addEventListener(MouseEvent.CLICK, INDEX_Raising);
I dont have a 10th line.
also, when i click the 7th option, nothing happens. However, options 1 - 5 on the drop down menu work just fine.
Thanks for any insight.

Right after posting that, I got an idea to try adding the following to frame 1:
addEventListener(Event.ENTER_FRAME, Frame_147);
function Frame_147 (event:Event):void
          if (currentFrame==147)
                    stop ();
          Caption ();
          IndexMC.Safety_Menu_Button.addEventListener(MouseEvent.CLICK, INDEX_Safety);
          IndexMC.Tools_Menu_Button.addEventListener(MouseEvent.CLICK, INDEX_Tools);
          IndexMC.Methods_Menu_Button.addEventListener(MouseEvent.CLICK, INDEX_Methods);
          IndexMC.Method1_Menu_Button.addEventListener(MouseEvent.CLICK, INDEX_Method1);
          IndexMC.Method2_Menu_Button.addEventListener(MouseEvent.CLICK, INDEX_Method2);
          IndexMC.TDBL_Menu_Button.addEventListener(MouseEvent.CLICK, INDEX_Tdbl);
          IndexMC.Raising_Menu_Button.addEventListener(MouseEvent.CLICK, INDEX_Raising);
I then commented-out frame 147.
the error i got pointed to line 36 of frame 1, which is:
IndexMC.TDBL_Menu_Button.addEventListener(MouseEvent.CLICK, INDEX_Tdbl);
Being able to focus on this, i see that i have IndexMC.TBDL instead of IndexMC.TDBL, i think this was one of those "been looking at this thing for too long" errors. Thank you for looking into this, the problem is now solved. As for the error pointing to a line that doesn't exist:
I still have no idea why it would say the issue was frame 147:10

Adding T-code to Role Area Menu which doesn't exist in box

Hello,
We are using a SAP system called QIM which has "jumplink" functionality, which is a web based linked (NWBC) which will launch you into a ERP system transaction when clicked. For example, in QIM we will display a outbound delivery, and if we click on the link it launches VL03N from the ERP system and displays as web UI.
In PFCG under area menu, this transaction code appears under the menu, but VL03N doesn't actually existing in the system... The issue is we created a custom object for inbound delivery and we need ot add it under this area, but when we attempt to add a transaction code under the Role Area, the system says the t-code doesn't exist... Even when we try this with an existing t-code showing in the menu (Vl03N) it says it doesnt exist. Same if we look at the authorization object S_TCODE. These t-codes exist in here, but when you try to readd them they system says it doesn't exist.
Please find the attachments with some screen shots... Any idea how we can do this?

You can create a role menu as remote enabled remote menu.
The authority checks will happen on the remote side, also against objects which don't exist in the calling system as the music is on the other side.
On the RFC client system side, you only need the parameter transaction to start the remote transaction in the remote system.
See the documentation on SYST function module ABAP4_CALL_TRANSACTION.
This is however a rather antiquated technology... it is more popular to use a SAP Portal or webdynpro applications for this sort of thing (the user does not notice the difference) or later versions of such integration such as Fiori UIs or imbedded links within the Business Client.
I don't want to lean out the window too far, but the buggy phase of these new things is approaching an end and they are usable if you are on newer releases. Then you can pool the menu and use APIs for navigation and no more irritating S_TCODE checks.
Cheers,
Julius

Error message Address doesn't exist 24593 in t-code va01,va02,va03

Hi Friends,
After entering order in T-code va03 i get the error message Address doesn't exist 24593 .
please guide
thanks in advance,
regards.
Bhaskar

Check your ship-to Party.
Also read the S-note 865271

Error code ws-36787-1 doesn't exist??? *****?

So i linked my Facebook account and uploaded my profile pic,After a week i lost all real names and pictures from all my friends and i cant use my own anymore.Got an email from scee saying it doesn't warrant a punishment, yet i constantly get error code ws-36787-1 whenever i even try to send a real name or close friend request and when i search the error code pages on here the code doesn't exist???? I've sent a message to sony but they just ignore me.Can any1 help a desperate girl out, please.?

Ask Playstation said this about it to someone else - https://twitter.com/askplaystation/status/582793804635377664 It's worth a try I guess, it can't hurt anyway. Did you get the email from sony as a reply to one you'd sent or they just emailed you? (OP)

Enhancing existing Abap code: using values that doesn't exist in table

Hi, 
I would like to enhance this code . My requirement is as follows. 
I have two tables customer and product 
<pre>KNVP customer master data table
Customer PF Person
700008 YF 45555
700008 YQ 46666
700008 ZF 46666
700008 YM 49999
700008 ZQ 44444
700008 ZM 43333
T179 product hierarchy table*
product hier PF
1000014000 ZM
1000015000 ZF
1000033000 ZQ
The current extractor is showing YM for all YPF values
Customer Zperson ZPF YPF YPerson
700008 46666 ZF YM 49999
700008 43333 ZQ YM 49999
700008 44444 ZM YM 49999</pre>
 
Case 1:IF customer doesn't have Partner function value YQ in master data then partner function YF person and partner function should be use.
 
case 2: IF customer doesn't have Partner function value YF in master data then partner function YQ person and partner function should be use.
 
case3:IF customer doesn't have Partner function value YQ and YF in master data then partner function YM person and partner function should be use.
 
The tricky part is that YQ doesn't exist in T179 table
 
<pre>
LOOP AT T_DATA.
 ZIDX = SY-TABIX.
 CLEAR T179.
 Select partner function, assigned to current
 product hierarchy level 2
 SELECT * FROM T179
 WHERE STUFE = '2'
 AND PRODH = T_DATA-PRODH.
 ENDSELECT.
 Replace value with new partner function.
 by replacing first letter to 'Y'
 CONCATENATE 'Y' T179-ZZPARVW+1(1) INTO NEWPF.
 Try to find new sales employee with this new partner function
 CLEAR KNVP.
 SELECT * FROM KNVP UP TO 1 ROWS
 WHERE KUNNR = T_DATA-KUNNR
 AND VKORG = T_DATA-VKORG
 AND PARVW = NEWPF.
 ENDSELECT.
 IF SY-SUBRC EQ 0.
 New partner found with this partner function
 T_DATA-ZPARVW = NEWPF.
 T_DATA-ZPERNR = KNVP-PERNR.
ELSE.
 NEWPF = 'YM'.
 Try to find new sales employee with partner function 'YM'
 CLEAR KNVP.
 SELECT * FROM KNVP UP TO 1 ROWS
 WHERE KUNNR = T_DATA-KUNNR
 AND VKORG = T_DATA-VKORG
 AND PARVW = NEWPF.
 ENDSELECT.
 T_DATA-ZPARVW = NEWPF.
 T_DATA-ZPERNR = KNVP-PERNR.
 ENDIF.
 MODIFY T_DATA INDEX ZIDX TRANSPORTING ZPARVW ZPERNR.
</pre>
 Edited by: Matt on Aug 24, 2010 9:31 AM - fixed formatting

Hi,
thanks for your input, I have written it like this and it is working well for YQ and YF partner functions but YM is not showing when both are missing.
LOOP AT T_DATA.
 ZIDX = SY-TABIX.
 CLEAR T179.
* Select partner function, assigned to current
* product hierarchy level 2
 SELECT * FROM T179
 WHERE STUFE = '2'
 AND PRODH = T_DATA-PRODH.
 ENDSELECT.
* Replace value with new partner function.
* by replacing first letter to 'Y'
 CONCATENATE 'Y' T179-ZZPARVW+1(1) INTO NEWPF.
IF SY-SUBRC EQ 0.
IF NEWPF EQ 'YF'.
 READ TABLE T_KNVP WITH KEY PARVW = 'YF'.
 IF SY-SUBRC EQ 0. "YF exists in master data
 CLEAR KNVP.
 SELECT * FROM KNVP UP TO 1 ROWS
 WHERE KUNNR = T_DATA-KUNNR
 AND VKORG = T_DATA-VKORG
 AND PARVW = 'YF'.
 ENDSELECT.
 T_DATA-ZPARVW = 'YF'.
 T_DATA-ZPERNR = KNVP-PERNR.
 ELSE.
 READ TABLE T_KNVP WITH KEY PARVW = 'YQ'.
 IF SY-SUBRC EQ 0. "YQ exists in master data
 CLEAR KNVP.
 SELECT * FROM KNVP UP TO 1 ROWS
 WHERE KUNNR = T_DATA-KUNNR
 AND VKORG = T_DATA-VKORG
 AND PARVW = 'YQ'.
 ENDSELECT.
 T_DATA-ZPARVW = 'YQ'.
 T_DATA-ZPERNR = KNVP-PERNR.
ENDIF.
ENDIF.
ENDIF.
IF NEWPF EQ 'YQ'.
 READ TABLE T_KNVP WITH KEY PARVW = 'YQ'.
 IF SY-SUBRC EQ 0. "YQ exists in master data
 CLEAR KNVP.
 SELECT * FROM KNVP UP TO 1 ROWS
 WHERE KUNNR = T_DATA-KUNNR
 AND VKORG = T_DATA-VKORG
 AND PARVW = 'YQ'.
 ENDSELECT.
 T_DATA-ZPARVW = 'YQ'.
 T_DATA-ZPERNR = KNVP-PERNR.
 ELSE.
 READ TABLE T_KNVP WITH KEY PARVW = 'YF'.
 IF SY-SUBRC EQ 0. "YF exists in master data
 CLEAR KNVP.
 SELECT * FROM KNVP UP TO 1 ROWS
 WHERE KUNNR = T_DATA-KUNNR
 AND VKORG = T_DATA-VKORG
 AND PARVW = 'YF'.
 ENDSELECT.
 T_DATA-ZPARVW = 'YF'.
 T_DATA-ZPERNR = KNVP-PERNR.
ENDIF.
ENDIF.
ENDIF.
 ELSE.
 NEWPF = 'YM'.
* Try to find new sales employee with partner function 'YM'
 CLEAR KNVP.
 SELECT * FROM KNVP UP TO 1 ROWS
 WHERE KUNNR = T_DATA-KUNNR
 AND VKORG = T_DATA-VKORG
 AND PARVW = NEWPF.
 ENDSELECT.
 T_DATA-ZPARVW = NEWPF.
 T_DATA-ZPERNR = KNVP-PERNR.
 ENDIF.
 MODIFY T_DATA INDEX ZIDX TRANSPORTING ZPARVW ZPERNR.
 ENDLOOP.
thanks
Edited by: Bhat Vaidya on Aug 30, 2010 1:31 PM

In SARP t.code its saying that the tree SD01 doesn't exist............

hi,
sap gurus,
good morning to all,
i have gone to t.code SARP and in reporting tree i have given SD01 it is saying that reporting tree
SD01 doesn't exist and every report is existing there.
what might be the reason for that.
its a basis problem or not
plz any body confirm
regards,
balaji.t
09990019711

Hi,
I think you entered SDo1, try with SD01(zero) in SARP.
Goto SARP and enter SD01 ( or F4) in Report tree field and choose display. it will show you report tree for SD01.
I am able to see SD01 in possible entries in SARP.
If you are able to access SARP,then i think you should have access to SD01 also.
Reward if it is useful
Regards,
Chandra
Edited by: chandra sekhar S on Jun 2, 2008 11:30 AM

Table 'sitv.a' doesn't exist. vendor code 1146

Post Author: pattyg
CA Forum: Crystal Reports
I need help with a sql statement that I am using in Crystal reports. The table that I am using is sitv and I get an error that
it doesn't exist.
Here is the statement:
SELECT a.UID, a.fid, b.fname , c.lname, d.genderFROM a as profile_values LEFT OUTER JOIN (SELECT uid,fid, cast(value as char (20)) as 'Fname' FROM profile_values WHERE profile_values.fid =1) as bON a.UID = b.UIDLEFT OUTER JOIN(SELECT uid,fid, cast(value as char (20)) as 'lname' FROM profile_values WHERE profile_values.fid =2) as cON a.UID = c.UIDLEFT OUTER JOIN(SELECT uid,fid, cast(value as char (20)) as 'gender' FROM profile_values WHERE profile_values.fid =3) as dON a.UID = d.UID
Any help will be greatly appreciated. Thanks in advance.

Post Author: pattyg
CA Forum: Crystal Reports
I figured it out after I went though my statements more closely. The second line was reversed.
FROM a as profile_values
It should be From provile_values as a.

TAX CODE doesn,t exist for jurisdictin code

hi
while posting the GR, when selecting taxcode it is giving message " TAX CODE V1 DOES NOT EXIST FOR JURISDICTION CODE 2200 "
i have defined jurisdiction code under costing sheet( tax procedure) and tax code for jurisdiction code. then entered in screan in excise invoice detail in header and item tabs (in head in invoice tab, no excise invoice showing )
thank you
sowmya

hi all
i have already did all the things you people said.
1. I have already assigned company code to tax code.
    in "tax on goods movements"
2. I have already defined "MWVS" condition type in "FV11"
      which is the link between taxcode and country.
3. And "JMOP" offcourse, is the basic excise duty condition, I have already
    defined in "FV11"
But still getting the error
please help me
regards
anand.

Form doesn't exists after calling driver program

Hi,
 I had created a invoice form, and i called through driver program in se38.After executing i m getting as 'Form doesn't exists'.
'zinvoice1' is the name of the smartform.
Code as follows:
REPORT ZINVOICE1.
tables: kna1,vbrp,vbrk.
parameters: p_kunnr like vbrk-kunag,
 p_vbeln like vbrk-vbeln.
data : fm_name type rs38l_fnam.
data: t_vbrp like standard table of vbrp,
 t_vbrk like standard table of vbrk.
data: fs_kna1 type kna1,
 fs_vbrk like line of t_vbrk,
 fs_vbrp like line of t_vbrp.
start-of-selection.
select single * from kna1 into fs_kna1
 where kunnr eq p_kunnr.
select * from vbrk into table t_vbrk
 where kunag eq p_kunnr and vbeln eq p_vbeln.
select * from vbrp into table t_vbrp for all entries in t_vbrk
 where vbeln = t_vbrk-vbeln.
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
 EXPORTING
 FORMNAME = 'zinvoice1'
 VARIANT = ' '
 DIRECT_CALL = ' '
 IMPORTING
 FM_NAME = fm_name
EXCEPTIONS
 NO_FORM = 1
 NO_FUNCTION_MODULE = 2
 OTHERS = 3
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION '/1BCDWB/SF00000050'
EXPORTING
 ARCHIVE_INDEX =
 ARCHIVE_INDEX_TAB =
 ARCHIVE_PARAMETERS =
 CONTROL_PARAMETERS =
 MAIL_APPL_OBJ =
 MAIL_RECIPIENT =
 MAIL_SENDER =
 OUTPUT_OPTIONS =
 USER_SETTINGS = 'X'
 IM_FS_KNA1 = fs_kna1
 IM_T_VBRP = t_vbrp
IMPORTING
 DOCUMENT_OUTPUT_INFO =
 JOB_OUTPUT_INFO =
 JOB_OUTPUT_OPTIONS =
 TABLES
 IM_T_VBRK = t_vbrk
EXCEPTIONS
 FORMATTING_ERROR = 1
 INTERNAL_ERROR = 2
 SEND_ERROR = 3
 USER_CANCELED = 4
 OTHERS = 5
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.

CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
EXPORTING
FORMNAME = 'ZINVOICE1'
VARIANT = ' '
DIRECT_CALL = ' '
IMPORTING
FM_NAME = fm_name
EXCEPTIONS
NO_FORM = 1
NO_FUNCTION_MODULE = 2
OTHERS = 3
IF SY-SUBRC 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION fm_name
EXPORTING
ARCHIVE_INDEX =
ARCHIVE_INDEX_TAB =
ARCHIVE_PARAMETERS =
CONTROL_PARAMETERS =
MAIL_APPL_OBJ =
MAIL_RECIPIENT =
MAIL_SENDER =
OUTPUT_OPTIONS =
USER_SETTINGS = 'X'
IM_FS_KNA1 = fs_kna1
IM_T_VBRP = t_vbrp
IMPORTING
DOCUMENT_OUTPUT_INFO =
JOB_OUTPUT_INFO =
JOB_OUTPUT_OPTIONS =
TABLES
IM_T_VBRK = t_vbrk
EXCEPTIONS
FORMATTING_ERROR = 1
INTERNAL_ERROR = 2
SEND_ERROR = 3
USER_CANCELED = 4
OTHERS = 5
IF SY-SUBRC 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.

Business System doesn't exist in the SLD

Hi,
 Im trying to import XI content into the Integration directory. when i logged into Integration directory I clicked Tools -> Import Configuration Objects.
 Im getting a dialog window saying "Business System <Business system name> doesn't exist in the SLD.
 but when i gave t-code SLDCHECK in the PI system, i could see that business system as maintained in the SLD.
 also i could successfully import the XI content for Integration Repository.
 Any suggestion is highly appreciated
Thanks
Sourav

Hi ,
we have done a migration from AAIX to HPUX. I have performed some post installation steps as part of this.
 As partof this i have followed the post installation steps for PI usage type. I have changed some com.sap.aii parameters to reflect to the current target systems.
also *** a part of this i refreshed the CPAcache b giving the follwing URL http://<host>:<Java-Port>/CPACache/refresh?mode=full with login id as PIDIRUSER and password. but its gving something like below...
The XML page cannot be displayed
Cannot view XML input using style sheet. Please correct the error and then click the Refresh button, or try again later.
Invalid at the top level of the document. Error processing resource 'http://sapdxh:54000/CPACache/refresh?mode=full'. Line...
CPA cache refresh (mode=full) successfully executed in 62009 milliseconds.
^
so is this causing the problem or are there any connection parameters in XI profile to be looked at more spsecifically ??
please suggest as im not able to find out this error and its on high priority to solve.
Thanks
Sourav

The Vertical FlowLayout that doesn't Exist?

Ok, I've looked through the forum, and checked on a popular search engine, and it seems to me that there is no such thing as a vertically oriented FlowLayout. But why not? Is it difficult/impossible to implement? Please, someone, explain.
Some suggested solutions to this involve using a vertical BoxLayout, but that just seems ugly, what with the way components get stretched to fit the entire height of the window. Of course one can set the maximum sizes of the components and so on, but it seems to me that that's just making things more complicated than (I think) they ought to be. And to make matters worse the components are all crushed together with no gaps in between..
Surely a LayoutManager that stacks components vertically at their preferred sizes by default would be a fundamentally useful thing?
Well anyway... not much of a question (more of a moan), never-the-less, if anyone knows why a vertical FlowLayout doesn't exist as standard please let me know... Then later I'll have a moan about the GridLayout asking why it doesn't keep each row and column only as tall and as wide as it needs to be.
Regards
-- Mick

and it seems to me that there is no such thing as a vertically oriented FlowLayoutCheck out the [Relative Layout|http://www.camick.com/java/blog.html?name=relative-layout]. I know from the name you would never guess it could do a vertical FlowLayout, but it turned out to be far more flexible than I ever imagined it would be. In your case the code would be something like:
RelativeLayout rl = new RelativeLayout(RelativeLayout.Y_AXIS, 5);
//rl.setAlignment(RelativeLayout.LEADING);
rl.setAlignment(RelativeLayout.CENTER);
JPanel panel = new JPanel( rl );
panel.add(component1);
panel.add(component2);
...

Content Repository Doesn't Exist Message CMS106

I am facing trouble while configuring a content repository in SAP Netweaver/MiniSAP.
I created a content repository using the transaction code oac0.
I want to create my content repository to HTTP Content Server which is not a SAP Content Server rather a third party Content Server.
When I provide URL and start the server it does recongnise the server however it gives message that content repository doesn't exist.
Understood that this is a logical repository. do i need to map it to some physical storage location.
Please help and suggest .....
Thanking you

Hi,
if this is a 3rd party content server, then you have to contact the vendor.
The thing is that creating the repository in OAC0 only creates the definition in SAP, but the content repository must be created physically in the content server too.
If this was a SAP Content Server, then this function is possible using transaction CSADMIN, but this will not work with 3rd party servers. I suppose that 3rd party content servers have admin tools to do this...
cheers,
juan

Tax code EA does not exist for jurisdiction code QC000000

Hi All,
We are getting this error "Tax code EA does not exist for jurisdiction code QC000000".
Can anyone suggest on this ?

Hi All,
I am still working on this issue and want to add some information based on my analysis and if at all some could suggest something on that it would be very helpful.
I tried to debug the IDOC which was giving this error and also simultaneously debugged the other IDOC which was successful.
I found that the failed IDOC is giving this error as when SD_COND_ACCESS Fm is called in the satndard code , the failed IDOC scenario doesn't return any values in condition records table for one of the condition types ZIR1.
Where as the successful IDOC returns values for condition records table when FM SD_COND_ACCESS is called for condition type ZIR1.
Any suggestion ??
Thanks !
MK

Subcontracting Challan Error *showing error "The document doesn't exist"*

Dear Gurus,
When i run T-code j1ifq for quantity reconcilation for subcontracting challan .then i enter Mat. Doc(GRN document) and fiscle year 2009 and run F8 it's
showing error "The document doesn't exist" but it exist in system.How to resolve this problem pl provide needful method to solve this issue.
Thanks
Abhinav

hi,
have you typed the challan no or selected from the F4 list? please check that and the year of the challan document. then you should not have this error.

T-code SEGW doesn't exist!!

Similar Messages

Maybe you are looking for