T006-Decan change after users have used the TO unit of measure
Currently in our system for TO (tonnes) it has T006-Andec as 3 and T006-Decan as 0 and it issues the users a warning message "Order quantity violates rounding rule" if they type in decimals in the purchase order quantity. We have been asked to change T006-Decan to a 3 and do away with the warning message. What happens if you change T006-Decan from 0 to 3 after users have already used the unit of measure (TO) in the R/3 SAP_APPL 470 system on materials, purchase orders, sales documents, receipts, etc...? I don't want to impact our users in production since I do not where this unit of measure has been used. Any advice is welcomed. Thank you.
Hi
If you are changing the decimal places in T006 - DECAN , the number which was 1000 would show as 1,000... so previously it was 1000 tonnes now it will show as 1 tonne.... such things happen....Check with SAP before doing changes to the Standard UOM's...
I am not able to find the correct SAP note for this.... but its there hope you get it
Thanks & Regards
Kishore
Similar Messages
-
iif I import a photo into my website and make it a small size then when I create a slideshow and add that photo from my computer it comes in too small every time. It's as though Muze is optimizing the original photo and that is very frustrating. I have to open that photo in Photoshop and save it again to fix it. Very annoying. Will this be fixed?
Muse does not touch the original image, but it does maintain an optimized copy of the original. You can verify by locking the original image file to prevent Muse from touching it.
Muse performs the optimization at export/publish time based on the largest instance of the image in the project. In this case, when you re-import the image, Muse is incorrectly assuming you want the new image at the same size as the first instance that you resized smaller. We'll look at fixing this behavior in the next release, but in the mean time there is a workaround.
Instead of opening the image in Photoshop and re-saving, which changes the modification date of the image and signals Muse to re-import the image, try double-clicking until the image is selected. The selection handles will be smaller and solid if you have the image selected. The handles will be larger and hollow if a container is selected. Then resize the image to the dimensions you want. Initially, the image will be pixelated because Muse is still using the previously optimized copy. However, if you choose File->Preview Page in Browser, the image will be re-optimized for the new dimensions and you should see a higher resolution version in both the browser and on your page within Muse.
You can more easily verify the optimization behavior as follows:
1. Place an image at 25% of its original size.
2. Select File->Preview Page in Browser, which will optimize the image at the 25% size.
3. Duplicate the placed image and resize the duplicate to be twice as big (i.e. 50% of the original). Initially, this duplicate will be blurry after the resize.
4. Select File->Preview Page in Browser, which will re-optimize the image and redraw at the higher resolution. -
I have used the resume tablet and put my resume into format but when emailing it, it will not open on windows. How can I change the format to where they will be able to open and view it?
I guess you mean one of the resume templates.
What "format" have you saved your finished resume in?
The only formats a Windows user will be able to open are .doc (Word), .pdf and rtf. The 1st 2 are usually the best.
There is no Windows version of Pages.
Peter -
ftp.oxbow.fr This is the file I have log on and I have used the correct password and user's name and this is what comes up:
Alert 530 Authentication Failed!This is a user to user forum. Apple is not here. Apple does not answer questions here.
iTunes Support -
http://www.apple.com/support/itunes/
Mac App Store Support -
http://www.apple.com/support/mac/app-store/ -
I have a pc that is one year old and the hard drive is crashing we use it only for quick books to run our small business I would like to buy a macmini and install the OS from the pc to the apple product i will not use the pc after, can i use the OS off the pc or do I have to purchase another?
I think you can get Windows 7 for around $99. Install the 64bit version as the 32bit version will not be able to use all your new computer's ram if you have more than about 3.5gb.
Back up your quick books data now before the old hard drive dies. You can copy your data over to your new installation of Windows and quick books.
By the way, there is quick books for Mac http://quickbooks.intuit.com/mac/?sc=BNR-000-COR-quickbooks&priorityCode=4902000 000&cid=ppc_google_QB-Intuit-Core-Brand-Mac_quick-books-for-mac_exact&site=&ad_i d=9347918288&raw_keyword=quick%20books%20for%20mac
So you may not need to install Windows at all. -
after recording text using the Dragon dictation app, it can be copied to the iOS systme clipboard for use in any app, how does the user access the clipboard to retrive this information if it is no longer on the screen?
You need to do a long-press in any data entry field, then select Paste.
-
i havnt changed my passcose and using the same passcode which i have been using since ages , its still not working, and i am 100 percent sure i am using the correct passcode ?.,
Either way the result is the same... if you forgot (or don't know) your passcode, restore the device from backup on the last computer it was synced with when the passcode was turned on... this will remove the passcode. If you do not have access to the last computer it was synced with, you will have to force it into recovery mode & restore as a new device.
-
How to use RZ10 after I have imported the langugage package!
Hi experts!
I meet a problem with T-code RZ10 . After I have imported the language package with T-code SMLT, then I want to modify the language setting of logon screen , so I go to the T-code RZ10, The proble is that after I active the new profile, and stop then startup my SAP ,my GUI can not log on to SAP. the profile I have actived is as follows:
SAPSYSTEMNAME = TAL
SAPGLOBALHOST = SAPECC6
SAPSYSTEM = 00
INSTANCE_NAME = DVEBMGS00
DIR_CT_RUN = $(DIR_EXE_ROOT)\$(OS_UNICODE)\NTI386
DIR_EXECUTABLE = $(DIR_INSTANCE)\exe
PHYS_MEMSIZE = 512
rdisp/wp_no_dia = 6
rdisp/wp_no_btc = 3
icm/server_port_0 = PROT=HTTP,PORT=80$$
**********add on parameters**************
zcsa/system_language = 1
zcsa/installed_languages = 1DE
**********add on parameters**************
SAP Messaging Service parameters are set in the DEFAULT.PFL
ms/server_port_0 = PROT=HTTP,PORT=81$$
rdisp/wp_no_enq = 1
rdisp/wp_no_vb = 1
rdisp/wp_no_vb2 = 1
rdisp/wp_no_spo = 1
DIR_CLIENT_ORAHOME = $(DIR_EXECUTABLE)
New parameter creating by myself is including "add on parameters" above, after I active the new profile, the menu "Utilities -->Check all profile ---> of active server " , result is no error .
I don't know how to log on the SAP with my new language imporing by SMLT.
Best Regards
RichardHi!
I have actived the three language in RSCPINST, but after I run the report , I find out that something is strange as follows:
S e l e c t e d S e t t i n g s :
Language(s):
ZH (1 ) Chinese
EN (E ) English
DE (D ) German
Country code:
RSCPINST will update TCP0D entries when activated.
No country selected
R e s u l t s :
Code page configuration type:
Unicode configuration
Processed language entry:
RSCPINST will update TCP0I entry when activated.
1DE
TCPDB for Unicode configuration (should be empty):
RSCPINST will update TCPDB entries when activated.
<Empty>
T a s k s :
Required OS locales and their current status:
Off Locale check not required for Unicode
Required profile parameter modifications:
RSCPINST does NOT change the value of profile parameter.
Please check the value of below parameter(s) after activation.
1) Please update zcsa/installed_languages.
e.g. Copy the new value and paste it into a field in transaction RZ10
New: 1DE
Current (sorted):
SAPECC6_TAL_00 1DE
2) Please proceed with Check result for below parameter(s):
OK Checked and no inconsistency found.
then I go to the SE11 ,Input table name TCP0D , I find out that there is only one entry: the "COUNTRY" field is blank and the "DBLANGU" is "E".
I have no idea what it means : Required OS locales and their current status:
Off Locale check not required for Unicode -
After updating to OS X Mavericks, internet USB dongles topped working. Many other users have faced the same problems. Can someone please help me out? I am unable to find online help.
Sourcing Drivers for dongles when upgrading OS is a nightmare whether its osx or windoze. It takes the likes of Huawei ages to produce new versions. I strongly recommend getting a portable wifi (mifi) which will work with any device and sits in your pocket not sticking out the usb port where it gets broken. Recommend Huawei E5756
-
after a few uses, the program will not load, the only way to fix it is to completely uninstall the CS suite wipe the drive and reinstall the software, then after a few uses it stops working, how do i fix this?
Not sure of an answer to your basic question, but it may be that you can run a repair (on Windows --> Control Panel>Programs & Features and run the repair on Acrobat). If that fixes the issue, at least temporarily, at least you will not be reinstalling everything -- a real pain.
Next, open Acrobat and go to the Help to run the updates and be sure you are current. On some OSs, the updates are critical. -
I have a iPad and iPhone with the same Apple ID, but on Game Center I have used the same id for both devices and they are two different profiles and I was wondering how to have one of the accounts on both devices.
Hi Jamesdwills,
Welcome to the Support Communities!
If you are using the same Apple ID on both devices, the Game Center profile should be the same.
Check out this information from the iPad User Guide. Try signing out of the Game Center on both devices and then sign back in with the correct Apple ID:
Using Game Center
http://support.apple.com/kb/ht4314
Game Center settings - iPad User Guide
http://help.apple.com/ipad/7/#/iPad9a13d039
Game Center settings
Go to Settings > Game Center, where you can:
Sign out (tap your Apple ID)
Allow invites
Let nearby players find you
Edit your Game Center profile (tap your nickname)
Get friend recommendations from Contacts or Facebook
Specify which notifications you want for Game Center. Go to Settings > Notifications > Game Center. If Game Center doesn’t appear, turn on Notifications.
Change restrictions for Game Center. Go to Settings > General > Restrictions.
Cheers,
- Judy -
I have Windows 7, Microsoft Outlook and PSE 13. I have used the "Share photos as embedded images" feature frequently, but today when I went to use it, it wasn't there, only the option to send email with files attached. How do I get back the ability to send emails with photos embedded. I like adding the frames and backgrounds and I think it's easier for recipients to look at the photos. Thanks for any suggestions of things to try.
GailI had a similar problem in that my wife's iphone 5 could not send pics with imessage. Had to set the settings to default to SMS or whatever. After laboring many hours on the web I coincidentally was on the phone with the internet people to question my internet speed. They changed the router channel, which is something that I am capable of doing myself. After that, the pics go over imessage. My own Iphone didn't have the problem. We are both latest IOS 7.0.6.
-
Hi,
After speaking with a Microsoft engineer over the phone, I've been told that there is no way to prevent users to go to their OWA and manually Purge specific items from the ''Recover deleted items''. The Microsoft tech told us to place the desired mailboxes
on a litigation-hold and that all data will be recoverable... but only from the time you place the mailbox onto Litigation-Hold and previous items, which doesn't take effect for new-coming emails.
1- From what I understand, any new items coming in the mailbox after the Litigation-Hold is put in place will still be ''purgeable'', right?
2- Is there a way (PowerShell, Security group, etc.) that can prevent a user from using the Purge option?
We are very surprised that there is absolutely no thread that talks about this issue, which in our opinion, is a major legal and security flaw from Office 365. This is a main concern for us to actually go with Office365. For instance, this means that at
any given time, if a user exchanges emails with a competitor, they can manually purge emails sent and receive as soon as it is sent/received, even after Litigation-Hold is in place.
Thank you for your reply and let us know if you have more questions.
Normand Bessette, IT support technician, Newad MediaThank you for the reply.
Is there still a way to prevent users from using the Purge option, like with a Powershell script to disable Purge? -
Can I UNINSTALL the OLD VERSION of FIREFOX after I have installed the NEW ONE?
''locking - duplicate - https://support.mozilla.com/en-US/questions/862779''
Can I UNINSTALL the OLD VERSION of FIREFOX after I have installed the NEW ONE?Download latest Firefox version:
* http://www.mozilla.com/en-US/firefox/new/
* http://www.mozilla.com/en-US/firefox/all.html
Uninstalling Firefox
* https://support.mozilla.com/en-US/kb/Uninstalling%20Firefox
* DO NOT SELECT TO REMOVE USER DATA AND SETTINGS
Installing Firefox on Windows (use the Downloaded latest Firefox installer)
* https://support.mozilla.com/en-US/kb/Installing%20Firefox%20on%20Windows
Check and tell if its working. -
I changed my password and used the new computer, next time I tried to log in it wouldn't accept the password. I tried the old one as well but that doesn't work either. Can anyone help?
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
When the menubar appears select Terminal from the Utilities menu. Enter resetpassword at the prompt and press RETURN. Follow instructions in the dialog window that will appear.
Or see Reset a Mac OS X 10.7 Lion Password and OS X Lion- Apple ID can be used to reset your user account password.
Be sure to open Keychain Access and repair the keychain:
Assuming that you are using a recent build of OS X, go to /Applications/Utilities and launch the app called Keychain Access. Go to the Window pulldown menu and select "Keychain First Aid". Enter your password, set the radio button to "Repair", and click "Start".
Maybe you are looking for
-
TypeError: Error #1009: Cannot access a property or method of a null object reference.
Hi all, I am new to ActionScript and Flash, and I am getting this error: TypeError: Error #1009: Cannot access a property or method of a null object reference. at jessicaclucas_fla::MainTimeline/stopResumescroll() I have several different clips in on
-
RE: HP XP Media Center 2005 Ed will not boot from HP System Restore CD's
RE: HP XP Media Center 2005 Ed will not boot from HP System Restore CD's. The following instructions about the "Code Purple" error FAILED. Error is still present. ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ ***PLAIN EN
-
I have PSE 7 it has stopped lauching - Why? I've had it for years and no problem with it. I have tried all round about ways to launch it (like rt clicking a jpeg and saying for PSE 7 to edit it) nothing works. I've gone directly to the shortcuts targ
-
Need to do a remote wipe of my iphone - stolen 24 hrs ago Need urgent help on this. Thanks - Pinaki < Personal Information Edited By Host >
-
Please tell me what is the problem with this code
Hai, Iam new to Swings. can any one tell what is the problem with this code. I cant see those controls on the frame. please give me the suggestions. I got the frame ,but the controls are not. this is the code: import javax.swing.*; import java.awt.*;