T2000 drops to ok during OS install

This has been seen in two separate sites to my knowledge.
While setting up the OS on brand new T2000's, a laptop attached to the serial management port as console goes into its screensaver. When the laptop is brought out of the screensaver back to its active state (touch any key, move the pointer), the T2000 is at the ok prompt.
If the screensaver is disabled, the install process proceed to completion.
Has anyone ever determined if this is a bug or a feature? And other than saying, "Well, just disable the laptop's screensaver.", is this documented anywhere? Must everyone figure this out on their own?
Thanks!

It's a feature.
You're going to have to disable the screensaver.
You're seeing a classic symptom from various laptop systems.
When the screensaver kicks in, the rest of the system goes into a state comparable to a S1 level hibernation.
That halts most all other processes or applications that might be running.
The act of switching back, out of the screensaver, establishes the connections again.
Your Sun system is interpreting it as the same as an abrupt physical disconnect/re-connect of the cable.
Review the man pages for kbd_, although I don't think you can effect any usable changes while in the middle of the installation.

Similar Messages

  • I installed Mountain Lion so that I could sync my notes with my iPhone that already syncs notes with a specific email address I use for school, but during the install it automatically set up Notes to sync w the wrong email addy. How can I fix it?

    I installed Mountain Lion so that I could sync my notes with my iPhone that already syncs notes with a specific email address I use for school, but during the install it automatically set up Notes to sync w the wrong email addy. It looked in Mail, which had 5 email accounts set up in it, and for some reason picked the only one that I no longer use because it is for a school that I no longer attend. How can I fix it so that it syncs with the correct email account for notes and calendar? There don't seem to be any settings available other than to check if you want to use the basic features. It also said during the set up that it was setting up 'find my mac' but if I look on the iCloud website there is nothing showing there for finding my mac.
    At this point I feel like I wasted my money paying for this supposed upgrade. I got nothing for it but frustration. It even automatically set my security settings to allow only downloads from the Mac store so the first time I went to download something I had to stop what I was doing and go correct settings first. I feel like there should be a security setting to block downloads from the Mac store so I don't accidentally end up clicking the wrong thing and being charged.

    iCloud isn't syncing them on your phone.  You simply added the email account to your phone and enabled calendar and notes syncing with the email provider, and the calendar and notes appear in the calendar and notes apps on your phone.  You can do this with Gmail, Yahoo and other IMAP account.  iCloud email is just another IMAP account, but syncs notes with Apple's iCloud server just as Gmail syncs notes and calendars with Google's server.
    iCloud didnt' set up a non-iCloud account on your Mac.  When you check Mail in System Preferences>iCloud, it only creates an iCloud email account.  You can also add other email accounts to your Mac by going to System Preferences>Mail,Contacts,Calendars and clicking on the "+" sign on the bottom of the left sidebar.  If you added these other email accounts to your Mac before you upgraded to Mountain Lion, these were simply maintained on your Mac after you upgraded.

  • Ora-01031: Insufficient Privileges error during 10g install on Suse 9.1

    I have tried installing Oracle 10g on Suse 9.1 Professional several times. Although I have tried to carefully follow the instructions in the installation guide, I get the following error.
    When the Database Configuration Assistant start during the initial installation, I receive the error -> Ora-01031: Insufficient Privileges.
    I created the oinstall and dba group according to the installation guide and made oracle a member with oinstall being the primary group. I also ran -> chown -R oracle:oinstall -> on the Oracle_Base folder to which I want to install the software and oradata files. Similarly, I ran -> chmod -R 775 -> on that folder. During the install I ran the script -> oracle_base/oraInventory/orainstRoot.sh -> during the installation when prompted.
    I would really appreciate any help that any of you could provide. Thank you so much in advance.
    -Daniel

    I'm logged in as oracle when I perform the installation but as soon as the database configuration assistant tries to create the database I get this error. I had made oracle a member of oinstall and dba just as it was desribed in the instructions. (At one point I even tried giving oracle root, which didn't seem to work either. I have since reinstalled the OS.)
    Thank you for helping me with this!

  • Ora-01031: Insufficient Privileges during 10g install on Suse 9.1

    I have tried installing Oracle 10g on Suse 9.1 Professional several times. Although I have tried to carefully follow the instructions in the installation guide, I get the following error.
    When the Database Configuration Assistant start during the initial installation, I receive the error -> Ora-01031: Insufficient Privileges.
    I created the oinstall and dba group according to the installation guide and made oracle a member with oinstall being the primary group. I also ran -> chown -R oracle:oinstall -> on the Oracle_Base folder to which I want to install the software and oradata files. Similarly, I ran -> chmod -R 775 -> on that folder. During the install I ran the script -> oracle_base/oraInventory/orainstRoot.sh -> during the installation when prompted.
    I would really appreciate any help that any of you could provide. Thank you so much in advance.
    -Daniel

    I'm logged in as oracle when I perform the installation but as soon as the database configuration assistant tries to create the database I get this error. I had made oracle a member of oinstall and dba just as it was desribed in the instructions. (At one point I even tried giving oracle root, which didn't seem to work either. I have since reinstalled the OS.)
    Thank you for helping me with this!

  • Toshiba M305D : blue windows screen during the install of Windows 7 / Vista, no Audio on Windows XP

    Dear Users
    Last week I had a clean install of Windows 7 64bit on my M305D-S4830 laptop.
    I've used this OS on this machine before, and it worked fine.
    After installing Win7, the device manager showed 2 unknown devices. First I've installed the O2 multimedia card reader, and it went ok. Secondly I've installed for the unknown device "hdmi audio" a hdmi audio driver from ATi, since the notebook has AMD 780V chipset and a Radeon HD3100 (it hasn't any hdmi output, but I didn't want to have any unknown devices). 
    And my nightmare begun.
    While restarting after the driver upgrade, my brand new Win 7 boot hang on blue screen code: 0x00000124, which is common for many hardware and software faults. I ran safe mode to clean the system from the hdmi audio driver, but the catalyst install manager dind't let me to remove it. Since it was a fresh install on a formatted HDD, I took the time for another clean install (20 mins). But during the Win 7 install, the installer hang on blue screen, guess what, code: 0x00000124. I changed to the factory-backup Win Vista disks of my laptop, but Vista had the same problem, I couldn't install this OS either, blue screen during install, too.
    I took a Win XP Prof SP3 as a last option, and I could finally install it. But after the install, I had problems with the Radeon HD3100, I couldn't install the driver from the .exe, I had to make it from the device manager via properties/I choose to/graphics adapters/own disk. So I don't have the control centre, but the display works in 1280x800.
    The bigger problem is: no sound.
    The device manager in Win XP shows only one unknown audio device: the hdmi audio. I can't install the conexant drivers, because it says I don't have the device for that. When I install the ATi hdmi driver for XP, I get the blue screen with the error 0x00000124. Nice.
    I have updated bios, and made a proper format with the partititons deleted, but it didn't helped. I think the Vista/7 install crashes at the point, when it tries to install the audio driver during OS install, because the XP was running until I have tried to install it, too. But I can't configure the Vista/7 install not to try loading it.
    So my laptop is only comnpatible with XP, the install of Vista or 7 crashes. And in XP, I have got no audio devices, therefore no sound. You can imagine, how glad I am looking at my Harman/Kardon speakers right now...
    Any ideas?
    Alex

    Satellite M305D-S4830 
    Any ideas?
    Alex, restore the hard disk to its original out-of-the-box contents using Toshiba recovery media. If you didn't burn them, order the discs.
       Order Toshiba Recovery Media
    If it doesn't run properly after that, you have a hardware malfunction.
    -Jerry

  • Error during BIBeans instalation on Jdeveloper 9.0.3.3 - 1205

    I cannot install version 9.0.3.6.0 of BIBeans on Jdeveloper 9.0.3.3. During the instalation Universal
    Instaler shows this error:
    Oracle BI BEans component will not be installed since Jdeveloper files of version 9.0.3.1035 9.0.3.1.1107 9.0.3.2.0 (or higher) were not found in the current Oracle Home (C:/Oracle/JDEV903).
    I think, Jdeveloper is installed correctly, i don't why i can't install BIBeans.

    1. Save JDeveloper file %JDEV_HOME%\jdev\bin\jdev.conf as jdev.conf.old
    2. Replace the last line in file %JDEV_HOME%\jdev\bin\jdev.conf as follows.
    Old contents: AddVMOption -Dproduct.version=9.0.3.1035
    New contents: AddVMOption -Dproduct.version=9.0.3.1.1107
    Then resave file %JDEV_HOME%\jdev\bin\jdev.conf
    3. Now BIBeans 9.0.3.4.0 can be installed correctly into the Oracle JDeveloper 9.0.3.1 (Build 1107) home directory with Oracle Universal Installer 2.2.0.14.0
    4. After step 3 has finished, replace file %JDEV_HOME%\jdev\bin\jdev.conf with file jdev.conf.old (from in step 1).
    Greetings
    Damian

  • TS3694 Error Msg during iTunes install, Service (Apple Moble Device) failed to start. Verify you have sufficient privilages to start system servicess

    Error message during iTunes install onto Win-7 32 system.

    Hello DarkSideWin,
    I found a couple of resources I think will help with the error message you are getting. 
    I recommend first reviewing the following article (the title refers to Bonjour service failing to start, but the steps are relevant to the error message you are getting as well):
    "Bonjour service failed to start, verify you have sufficient privileges" error message when installing
    http://support.apple.com/kb/TS1609
    If you are still not able to install iTunes after following those steps, I recommend reviewing this article next:
    Trouble installing iTunes or QuickTime for Windows
    http://support.apple.com/kb/HT1926
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • Errors occurred during installation, install failed.

    So recently I got into a bit of trouble when my web browsers got hacked and started installing some adware on my computer... I'm still getting that sorted out, but I think while I was going through my "Common Files" folder and deleting things that looked suspicious, I accidentally deleted some kind of file for Apple's many programs that install with iTunes.  I realized my mistake when, at the next reboot, Windows gave me an error that some program could not start due to a missing .dll file and then gave me the program name, which as it turns out was Apple Application Support.  I uninstalled the support program to attempt to correct the issue, but when I did it only broke things further!  iTunes claimed that it could not work without the support software, so I tried uninstalling and reinstalling iTunes to get the Application Support program back.  Sadly, this did not work either as iTunes did not uninstall correctly, freezing windows explorer.  Then when I downloaded the install file to try again, it gives me an error almost immediately saying "Errors occurred during installation, your system has not been modified.  Run the installer again."  (I'm paraphrasing)  When I run it again, the same thing happens.
    In conclusion, it appears that by deleting one simple file, I have broken iTunes permanently and I can no longer use it on my computer.  Ugh.  Can anyone help me get it back?  I can't believe I'm even asking this... I'm not really an apple fan but I do use it to put videos and stuff on my iPad and I have a bunch of playlists in there that I've spent time organizing, so I still use it as my "main" mp3 player.  This is very inconveinent!

    Windows gave me an error that some program could not start due to a missing .dll file and then gave me the program name, which as it turns out was Apple Application Support.  I uninstalled the support program to attempt to correct the issue,
    Let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
    Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
    http://www.apple.com/itunes/download/
    Download and install the free trial version of WinRAR:
    http://www.rarlab.com/
    Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
    Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
    Does it install properly for you?
    If instead you get an error message during the install, let us know what it says. (Precise text, please.)

  • Can a applet be SELECTED during its installing?

    In the chapter 11.2 of <The Java Card 2.2 Runtime Environment (JCRE) Specification>, it depicts that
    " The Installer shall ensure that during the execution of the install() method, the
    new applet (not the Installer) is the currently selected applet. In addition, any
    CLEAR_ON_DESELECT objects created during the install() method shall be
    associated with the selection context of the new applet."
    I am confused that whether a applet can be selected while it is being installed?
    And the following paragraph cocludes that "The installation of an applet is deemed complete if all steps are completed without failure or an exception being thrown, up to and including successful return from
    executing the Applet.register method. At that point, the installed applet will be selectable." It seems the latter depiction conflicts with the former.
    Who can give me a help?
    Thanks!

    The JCRE has to call your static install() method in order for you to be able to call register(). That register() is what informs the JCRE to add your applet to the JCRE table. In order to call your install(), the JCRE has to make your applet the default selected applet .
    If you violate something or throw an exception during the processing of the install(), the applet won't be installed, neither will it be in the JCRE table, therefore not selectable because it doesn't exist.
    To try it, just throw an ISOException in your install() and see what happens. Then try calling an algorithm that's not implemented like AES and see what happens.

  • Hello Everyone. I have an older version of aperture, aperture 2, that I wanted to install on my MAC. I attempted the installation, and during the install there was a check to see if my computer was capable of installing  the software, which it was.

    Hello Everyone. I have an older version of aperture, aperture 2, that I wanted to install on my MAC. I attempted the installation, and during the install there was a check to see if my computer was capable of installing  the software, which it was. After the install completed I tried running the software, and I got a message telling me I can't run this version with my operating system. Does anyone know why I can't run the aperture software, and why I was allowed to install it without some notification.

    Hello Everyone. I have an older version of aperture, aperture 2, that I wanted to install on my MAC. I attempted the installation, and during the install there was a check to see if my computer was capable of installing  the software, which it was. After the install completed I tried running the software, and I got a message telling me I can't run this version with my operating system. Does anyone know why I can't run the aperture software, and why I was allowed to install it without some notification.

  • Error when installing patch 5983191 during SOA install

    Installing SOA Suite 10.1.3.1 with 11g database (11.1.0.6)
    Following instructions in note 465159.1 (Known Issues #2) during SOA install.
    OPatch fails with:
    MISSING_COMPONENT : oracle.j2ee, 10.1.3.1.0
    This Oracle Home does not have components/versions required by the patch.
    'opatch lsinventory -detail' reports OracleAS J2EE version as 10.1.3.0.0
    Please advise.
    Edited by: Alan3 on Dec 8, 2008 3:33 PM
    BTW, this is on Oracle Enterprise Linux R5...

    I gave this a shot not really expecting it to work.
    I used OPatch version 1.0.0.0.60 and still get the same error.
    I didn't expect it to work because in patch 5983191 the actions file (etc/config/actions) has the j2ee version requirement specified as 10.1.3.1.0.
    Here's the contents:
    <oneoff_actions>
    <oracle.j2ee version="10.1.3.1.0" opt_req="R">
    <copy name="wsil-install.xml" path="%ORACLE_HOME%/webservices/lib" file_name="webservices/lib/wsil-install.xml"/>
    </oracle.j2ee>
    </oneoff_actions>
    The SOA install includes j2ee version 10.1.3.0.0 NOT 10.1.3.1.0.
    Patch 5983191 is incompatible with this SOA install.
    What next?
    Is there a j2ee upgrade patch that I can install BEFORE installing 5983191? If so, it's not in the documentation...

  • Salve. Conìmparsi these are errors during the instalation of Creative Suite 5.5 on Win 7 pro. How ca

    Exit Code: 6
    -------------------------------------- Summary --------------------------------------
    - 0 fatal error(s), 77 error(s), 2 warning(s)
    ----------- Payload: {CFA46C39-C539-4BE9-9364-495003C714AD} Adobe SwitchBoard 2.0 2.0.0.0 -----------
    WARNING: DF029: ARKServiceControl::StartService: Service not started/stopped SwitchBoard. Current State: 0 Exit Code: 0 Service Specific Exit Code: 0(Seq 1)
    ----------- Payload: {2EE4F060-CEE6-4002-AA8B-91B791541767} Pixel Bender Toolkit 2.6.0.0 -----------
    WARNING: DF035: CreateAlias:Icon file does not exist at C:\Program Files (x86)\Adobe\Adobe Utilities - CS5.5\Pixel Bender Toolkit 2.6\windows\pb_app.icofile:\\\C:\PIXELB~1\source\winwood\Staging    0X1.8E774FP-1022rea\windows\pb_app.ico42178f80493091e8e552c84a2897e9da68fce32_32_f8049309 1e8e552c84a2897e9da68fce for icon C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Adobe Production Premium CS5.5\Adobe Pixel Bender Toolkit 2.6.lnk with target C:\Program Files (x86)\Adobe\Adobe Utilities - CS5.5\Pixel Bender Toolkit 2.6\Pixel Bender Toolkit.exe(Seq 89)
    ----------- Payload: {7202D4A7-F7E6-4e7a-B77D-7B1C4E8B5CA6} Adobe Flash Player 10 ActiveX 10.0.0.0 -----------
    ERROR: Error 1722.There is a problem with this Windows Installer package. A program run as part of the setup did not finish as expected. Contact your support personnel or package vendor. Action NewCustomAction1, location: C:\Users\Claudio\AppData\Local\Temp\InstallAX.exe, command: -install activex -msi
    ERROR: Install MSI payload failed with error: 1603 - Errore irreversibile durante l'installazione.
    MSI Error message: Error 1722.There is a problem with this Windows Installer package. A program run as part of the setup did not finish as expected. Contact your support personnel or package vendor. Action NewCustomAction1, location: C:\Users\Claudio\AppData\Local\Temp\InstallAX.exe, command: -install activex -msi
    ----------- Payload: {F194231A-13B9-45B9-9699-1B9AC6500263} Adobe Encore CS5.1 Library 5.1.0.0 -----------
    ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 2710)
    ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 2726)
    ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 2728)
    ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 2734)
    ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 2736)
    ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 2738)
    ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 2740)
    ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 2742)
    ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 2746)
    ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 2748)
    ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 2750)
    ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 2752)
    ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 2754)
    ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 2756)
    ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 2770)
    ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 2784)
    ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 2790)
    ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 2792)
    ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 2794)
    ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 2796)
    ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 2798)
    ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 2800)
    ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 2802)
    ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 2804)
    ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 2818)
    ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 2820)
    ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 2822)
    ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 2826)
    ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 2836)
    ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 2838)
    ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 2840)
    ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 2842)
    ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 2844)
    ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 2846)
    ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 2848)
    ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 2854)
    ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 2864)
    ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 2866)
    ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 2870)
    ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 2892)
    ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 2894)
    ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 2896)
    ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 2928)
    ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 2938)
    ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 2958)
    ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 2980)
    ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 2998)
    ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 3018)
    ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 3020)
    ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 3022)
    ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 3024)
    ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 3026)
    ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 3028)
    ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 3066)
    ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 3072)
    ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 3074)
    ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 3084)
    ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 3094)
    ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 3118)
    ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 3156)
    ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 3158)
    ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 3160)
    ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 3162)
    ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 3164)
    ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 3166)
    ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 3168)
    ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 3172)
    ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 3174)
    ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 3176)
    ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 3186)
    ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 3196)
    ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 3198)
    ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 3214)
    ERROR: DW050: The following payload errors were found during install:
    ERROR: DW050:  - Adobe Flash Player 10 ActiveX: Install failed

    发自我的 iPhone
    在 2013年10月14日，6:46，dell 2713 <[email protected]> 写道：
    Salve. Conìmparsi these are errors during the instalation of Creative Suite 5.5 on Win 7 pro. How ca
    created by dell 2713 in Downloading, Installing, Setting Up - View the full discussion
    Exit Code: 6

  • How to resolve this problem. During ti install the new verson in my iPhone appear "The iPhone could not be restored. An unknown error occourred (1015)

    how to resolve this problem. During ti install the new verson in my iPhone appear "The iPhone could not be restored. An unknown error occourred (1015)

    You can't resolve the issue.  Your phone is bricked. 
    This is the error message that happens when you try and update a jailbroken phone.
    Discussion of jailbroken phones is prohibited by the Terms of Use of this forum.
    You need to buy another phone.

  • Installation stuck during phase Install Database Software

    I am installing DB2 version 9.1 FP5 on Windows 2003 R2 SP2.
    During phase Install database software I get the following error
    Invalid command line argument.  Consult the Windows Installer SDK for detailed command line help.
    When i check the db2setup.log i get the following:
    MSI (s) (84:68) [13:51:05:196]: Product installation will be elevated because user is admin and product is being installed per-machine.
    MSI (s) (84:68) [13:51:05:196]: Running product '{F23620AE-7E17-4863-898E-7F191B39022D}' with elevated privileges: Product is assigned.
    MSI (s) (84:68) [13:51:05:196]: PROPERTY CHANGE: Adding REINSTALLMODE property. Its value is 'vomus'.
    MSI (s) (84:68) [13:51:05:196]: PROPERTY CHANGE: Adding REINSTALL property. Its value is 'ALL'.
    MSI (s) (84:68) [13:51:05:196]: PROPERTY CHANGE: Adding INSTALL_MODE property. Its value is 'NEW'.
    MSI (s) (84:68) [13:51:05:196]: PROPERTY CHANGE: Adding DB2_LAUNCHER_RC_FILE property. Its value is 'C:\DOCUME1\ACONTR1\LOCALS~1\Temp\12\DB21.tmp'.
    MSI (s) (84:68) [13:51:05:196]: PROPERTY CHANGE: Adding DB2_LOG_FILE_PATH property. Its value is 'C:\Program Files\sapinst_instdir\NW04S\SYSTEM\DB6\CENTRAL\AS\db2setup.log'.
    MSI (s) (84:68) [13:51:05:196]: PROPERTY CHANGE: Adding LAUNCHPAD_LOCATION property. Its value is 'D:\Basis\51034846_3_DB2_LUW_91_FP5_Windows_64bit\DB2_LUW_RDBMS_91_FP5SAP_Windows\WINDOWS_AMD64\ESE\image'.
    MSI (s) (84:68) [13:51:05:196]: PROPERTY CHANGE: Modifying DB2_COPY_NAME property. Its current value is '___NotSet___'. Its new value: 'SAPDB2TWJ'.
    MSI (s) (84:68) [13:51:05:196]: PROPERTY CHANGE: Adding DB2_COPY_NAME_OVERRIDE property. Its value is 'SAPDB2TWJ'.
    MSI (s) (84:68) [13:51:05:196]: PROPERTY CHANGE: Adding INSTPATH property. Its value is 'D:\db2\db2twj\db2_software'.
    MSI (s) (84:68) [13:51:05:196]: PROPERTY CHANGE: Adding RSP_FILE_PATH property. Its value is 'C:\PROGRA1\SAPINS1\NW04S\SYSTEM\DB6\CENTRAL\AS\win_ese.rsp'.
    MSI (s) (84:68) [13:51:05:196]: PROPERTY CHANGE: Adding SILENT_MODE property. Its value is 'ON'.
    MSI (s) (84:68) [13:51:05:196]: PROPERTY CHANGE: Adding DB2_TRACE_FILE_PATH property. Its value is 'C:\Program Files\sapinst_instdir\NW04S\SYSTEM\DB6\CENTRAL\AS\db2setup.trc'.
    MSI (s) (84:68) [13:51:05:196]: PROPERTY CHANGE: Adding DB2_INSTALL_LANG property. Its value is 'EN'.
    MSI (s) (84:68) [13:51:05:196]: PROPERTY CHANGE: Adding MSINEWINSTANCE property. Its value is '1'.
    MSI (s) (84:68) [13:51:05:196]: PROPERTY CHANGE: Modifying TRANSFORMS property. Its current value is '|:inst1.mst;D:\Basis\5103481\DB2_LU1\WINDOW1\ESE\image\db2\Windows\ESE\1033.MST'. Its new value: ':inst1.mst;D:\Basis\5103481\DB2_LU1\WINDOW1\ESE\image\db2\Windows\ESE\1033.MST'.
    MSI (s) (84:68) [13:51:05:196]: PROPERTY CHANGE: Adding SETUPEXEDIR property. Its value is 'D:\Basis\5103481\DB2_LU1\WINDOW~1  CURRENTDIRECTORY='.
    MSI (s) (84:68) [13:51:05:196]: Note: 1: 1708
    MSI (s) (84:68) [13:51:05:196]: Note: 1: 2729
    MSI (s) (84:68) [13:51:05:196]: Note: 1: 2729
    MSI (s) (84:68) [13:51:05:196]: Product: DB2 Enterprise Server Edition -- Installation failed.
    MSI (s) (84:68) [13:51:05:196]: Attempting to delete file C:\WINDOWS\Installer\ced05bae.mst
    MSI (s) (84:68) [13:51:05:196]: MainEngineThread is returning 1639
    Info 1639.Invalid command line argument.  Consult the Windows Installer SDK for detailed command line help.
    D:\BASIS\5103481\DB2_LU1\WINDOW~1\ESE\IMAGE\DB2\WINDOWS"
    MSI (c) (E0:74) [13:51:05:305]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied.  Counter after decrement: -1
    MSI (c) (E0:74) [13:51:05:305]: MainEngineThread is returning 1639
    === Verbose logging stopped: 10/12/2008  13:51:05 ===
    Please advise.

    It seems that the path from where the installation has been started is too long. So you have to shorthen the following path were the RDBMS-software was copied to. 
    Current path (might be much longer, because of ~ placeholders):
    D:\Basis\5103481\DB2_LU1\WINDOW~1\ESE\image\setup.exe
    Please copy the RDBMS-DVD to an other shorter path, so that the path to setup.exe is e.g. 
    D:\short_path\WINDOWS_I386\ESE\image\setup.exe                                                                               
    The problem here is not the lentgh of this singel path. The problem is that in several steps this path will be multiplied in length until the limit is reached. Then the installation will fail.                                                                               
    Please try again with the shorter path.

  • I cannot complete an installation of ITunes.  During the install, I receive the following error message:   Error writing to file: C:\Program Files\Bonjour\dns_sd.jar.

    I cannot complete an installation of ITunes.  During the install, I receive the following error message:
    Error writing to file: C:\Program Files\Bonjour\dns_sd.jar.

    That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
    XP instructions in the following document: How to perform disk error checking in Windows XP
    Vista instructions in the following document: Check your hard disk for errors
    Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
    Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
    Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards?

Maybe you are looking for

  • Bridge CS4 downloader won't browse to folder with Windows 7 64 bit

    I recently installed PS CS4 on a new PC with Windows 7.  I used the Bridge downloader as usual to download my photos to a particular folder.  Everything worked as expected as it did when I used Windows XP.  When I tried this the second time, the Brid

  • Do I have to activate FIN_TRAVEL_1 and FIN_TRAVEL_2?

    Hello, Please, I have a doubt in travel business functions activation. FIN_TRAVEL_1 and FIN_TRAVEL_2 are not activated. But in R/3, WDs Abap for Travel Management seem to work ok. iViews in portal are also ok (they call WDs Abap). I don't know if I n

  • Photos won't display in Parent folders or All Photographs

    After upgrading to LR4 from LR3 when I go to the library and click on "All photographs" none of my 86000 photos show up. The same thing happens in folders module....for example: 1. My photos are in folders titled 20120306                             

  • About windows 10 driver support

    hello I have a question about Driver forWindows 10 for device Z510 Laptop "ideapad"? Why is there more than Driver for Bluetooth and Modem and Camera and Card Reader and Chipset and Networking: Wireless LAN - which one i shoud be install it? and why

  • Does Expression Web produce correct html code?

    I have been using Expression Web since version 1 and never has a problem with any server. On the present server by HostGator that upload to since years, suddenly all non-standard characters turned into squares. This is across the whole website since