T400 restarts automatically after shutdown

Hello!
This kind of problem in hand.
When I shutdown T400, it shuts but after 3 sec. it starts automatically. I have check bios settings and disabled wake on LAN settings.
I have uncheck Wake On's from Power Management settings refering to network adapters.
Any other T400 laptop I work with works perfect.
I went used regedit to change Autorestart Shell 1 -> 0
Any ideas how to get this baby to shut down.. without taking battery out??
-zambo

zambo, jibat, welcome to the forum,
it would be helpful if you could post which T400 (and Operating System) you have, even better post the Type and Model Number this will help members to help you. If it ends in CTO please provide some details about the hardware config; e.g. smart card reader etc? Please do NOT post your s/n.
Andy ______________________________________
Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
Deutsche Community Comunidad en Español English Community Русскоязычное Сообщество
PepperonI blog

Similar Messages

Print HTML Report Automatically after Each UUT

Hello
I saw the document on NI site called "Print HTML Report Automatically after Each UUT". That's exactly what I want to do with XML files. So I put it in my sequence file and it works fine, but when it opens the xml file at the first step, there's a pop-up from IE who say that "Scripts are generally safe, do you want to authorise this script" (This message is also displayed when I open my file in files explorer).
So, the print is not automatically anymore as I must answer to this pop-up. does anybody has a solution to bypass this pop-up ?
I tried to use the property silent on the class IWebBrowser2. Inded, the pop-up doesn't appear anymore, but my XML file isn't correctly printed. I supposed the default response of the pop-up (which is no) is applied. So the script isn't executed.
I also tried to configure IE to not display this pop-up : No result
Regards
Laurent

Hello,
I think that you need to configure your browser, can you take a look a this article:
http://www.maxi-pedia.com/scripts+are+usually+safe+do+you+want+to+allow+scripts+to+run
Regards,
Nacer M. | Certified LabVIEW Architecte

Tungsten E2 - Unit powers on automatically after 10 seconds

This is my wifes Palm and the battery drains quickly. The reason: If I power off the unit it powers on automatically after about 10 seconds. Looked in all the settings and tried to disable anything that could power on the unit but nothing worked. The one thing that I did is I replaced the original flap that came with the unit with a little leather case. The power button at the top is not being touched by anything however.
What could be causing the E2 to power on automatically?
Post relates to: Tungsten E2

The case could be touching a button on the device to wake it up. Take it out of the case and see if you have the same issue. If you do, then it is a problem with the E2.
Are you sync'ing the E2 to the same username in Palm Desktop as an older Palm device?
If you are, this will cause problems on the new device. When you sync the device, it saves the device settings, 3rd party apps, preferences, etc. in the backup folder in the username folder on the PC. When you sync the new device it copies the contents of the backup folder for the old device to the new device. This will cause corruption in the settings for the new device thus causing erratic behavior of the new device.
Do you have any 3rd party apps. installed on the E2?
For reference purposes, click on the following link for the support page for your device on the kb.palm.com webpage.
http://kb.palm.com/wps/portal/kb/na/tungsten/e2/unlocked/home/page_en.html
There are links on the page to the user guide, troubleshooting, how to's, downloads, etc.

Restarting automatically

Good day how to fix this problem I am having with my phone.it restart attomatically and keeps on restarting every minute.should I replace my battery?thanx in advance
Solved!
Go to Solution.

First, try placing a folded piece of paper or a cut business carrd, over the battery and put the back cover back on.
If it is a loose battery issue, that might help.
If it does not, please post back.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

PSL40E xp restart after shutdown only on AC power supply

uncheck automatically restart in the system failure section
disable wake up on lan
clear installation
sp2 or sp3, same problem
all drivers install
the microsoft knowledge base (Roxios Easy CD...) same problem, restart after shutdown
flash bios, hm bios only for vista and win 7 but no for xp on toshiba drivers page...

Does this happen when LAN cable is connected to your notebook only?

G5 dual 2ghz. Been unplugged for a while. Powers up but no video or power to usb keyboard. Boots up fine in safe mode, restart into normal mode ok. After shutdown, back to same issue. What's happening?

G5 dual 2ghz. Been unplugged for a while. Powers up but no video or power to usb keyboard. Boots up fine in safe mode, restart into normal mode ok. After shutdown, back to same issue. What's happening?

I keep seeing people ask and the advice to replace if it has been unplugged, but really have nothing to confirm that from my experiences.
My experience is that a weak or dead battery can cause much more than date and time issues.
I have seen it time and time again.
Deal with used machines and you will quickly learn....
I'll give no "recipe" or set list of symptoms, but the range of irregularities that can occur make it a quick and easy first line of troubleshooting, especially when the machine has been off the mains for a few months.
Why fight mysterious maladies and troubleshoot with the knowledge that the PRAM battery is beyond it's useful life.
Maybe they recharge?
Not likely. They are chemically nasty, disposable, one way discharge batteries.
They aren't Lithium-ion batteries

ITunes RADIO is not working. "iTunes could not connect to the iTunes Store. Make sure your internet connection is active and try again." Try as I may, as many as ten attempts, trying to connect after restart, after shutdown, nothing works. Just so - iTu

iTunes RADIO is not working.
“iTunes could not connect to the iTunes Store. Make sure your internet connection is active and try again.” Try as I may, as many as ten attempts, trying to connect after restart, after shutdown, nothing works. Just so …
iTunes STORE not “connectable” with my otherwise perfectly-working internet connection, viable, up and running for all other uses.
Simply put, firstly, I can't connect to the internet when I click on Radio. People are quite suspicious that this is Apple incompetence or your company's famous arrogance for this commonly-suffered problem that you won't or “can’t” fix.
Read the many web comments and you won’t be pleased with yourselves: the suspicion is that if you ruin internet radio on iTunes, Apple will somehow make more money on music downloads, etc. Bull.
Also, thirdly, my old playlist of 20 or so internet radio stations in the Ambient category STILL PLAYS !
Then fourth, I installed the latest available version of QuickTime Player 7.app Version 7.6.6 but it didn’t solve the problem either. I had QuickTime Player.app Version 10.2, but substituted what Apple website said was the latest, LOWER NUMBERED QuickTime Player version of 7.6.6
Fifth, I can't connect to iTunes store no matter what I do or what user group's advice I try. So I can’t buy or download anything from iTunes. Bad for business.
Sixth, I updated to the latest version of iTunes but this weird problem remains. All suggested Apple fixes or user group fixes are useless. Where is Apple’s famous technical competency, vaunted customer support?, and user-friendly product reputation? Get it back, please.
Solve this problem of yours ASAP for us, your numerous disgruntled, dissatisfied customers of iTunes. You can do better, should, and really –in all fairness- must.
===============================================================
NOTE: no password for iTunes exists in my Keychain. Is this a problem?
Apple ACCOUNT ID, and iTunes ID password, works but not to access iTunes with my healthy internet connection.
Apple store id It works via direct internet connetion but not through iTunes. Very strange.
===============================================================
FYI, Hardware Overview:
Model Name:                       MacBook Pro
Model Identifier:                 MacBookPro8,2
Processor Name:               Intel Core i7
Processor Speed:               2 GHz
Number of Processors:    1
Total Number of Cores:    4
L2 Cache (per Core):         256 KB
L3 Cache:                            6 MB
Memory:                              16 GB
Boot ROM Version:            MBP81.0047.B27
SMC Version (system):      1.69f4
Serial Number (system):   C0*******F8V
Sudden Motion Sensor:
State:   Disabled
Intel 6 Series Chipset:
Vendor: Intel
Product:            6 Series Chipset
Link Speed:       6 Gigabit
Negotiated Link Speed:           6 Gigabit
Description:      AHCI Version 1.30 Supported
M4-CT512M4SSD2:
Capacity:           512.11 GB (512,110,190,592 bytes)
Model: M4-CT512M4SSD2
Revision:           040H
Serial Number: 0000000012330912E75A
Native Command Queuing:    Yes
Queue Depth:   32
Removable Media:        No
Detachable Drive:        No
BSD Name:         disk0
Medium Type:      Solid State
TRIM Support:     Yes
Partition Map Type:     GPT (GUID Partition Table)
S.M.A.R.T. status:         Verified
Volumes:
disk0s1:
Capacity:           209.7 MB (209,715,200 bytes)
BSD Name:         disk0s1
Content:            EFI
disk0s2:
Capacity:           511.25 GB (511,250,432,000 bytes)
BSD Name:         disk0s2
Content:            Apple_CoreStorage
Recovery HD:
Capacity:           650 MB (650,002,432 bytes)
BSD Name:         disk0s3
Content:            Apple_Boot
Volume UUID:   600737FB-7A29-3BAE-859E-CBFE2E90C39A
<Edited by Host>

This my sound too simple, but I just kept clikning on the arrow next to the selected music and it finally "Kicked" in.
I live in Europe ,So Be persistent and don't give up ! Aug. 2013

Post 10.4.11 update, iMac restarts 30min after shutdown

Hi everyone,
Sorry if someone else has posted this, but I couldn't find a similar problem on the forum.
Since updating a few days ago, my mac no longer stays permanently shutdown, but restarts itself around 30min after shutdown.
I have run the combo update, verified disk (no problems), verified and repaired permissions, checked all the energy saver preferences were correct etc., but the problem is still occurring.
Can anyone advise what might be done to remedy this?
Thanks very much.
Mike

What you are descrbing is a kernel panic, a good number of kernel panics are caused by bad RAM. Combined with your spontaneous reboots that sounds like it might be the issue. I'd get it on the bench somewhere (Apple Store, local reseller) and have the memory tested.
And no, random reboots and shutdowns are not typical.
iMac Core 2 Duo 2.16 gHz Mac OS X (10.4.8) | Apple BT Keyboard & MM | AE Base Station |

Boot issue after shutdown plus power - no problem after restart or after removing power cord

Hello,
I have a Pavilion Elite m9275.nl desktop. I experience boot issues after a regular shut down.
After a regular shut down and pressing the power button within a few seconds/minutes, it keeps hanging in the HP startup / BIOS screen, Windows 8 won't boot, the hard drive light doesn't flash;
After a restart from Windows (instead of shut down) it boots correctly from the c-drive. No hard-drive problems at all;
After a shut down and removing the power cord for 10-15 minutes, it boots correctly from the c-drive. No hard-drive problems at all.
When the PC does not boot, F10 (to enter BIOS settings) does not work neither, so it seems to be a hardware or BIOS issue.
I already replaced the CMOS battery and already loaded default BIOS settings.
During a succesful boot or after pressing F10 (to enter BIOS settings) the screen shows some disk information right after the BIOS. This is the screen that says something like "press CTRL-I to start configuration utility". During a succesful boot the hard disk light flashes shortly before displaying that screen. During an unsuccesful boot the hard disk doesn't flash.
Before replacing a hardware component, I need to know what to replace...
Could it be the hard disk controller or hard disk is defect?
Where is the hard disk controller stored?
Can I upgrade the firmware of the hard disk controller?
BUT: why does it work when I remove the power cord for 15 minutes or after a restart (instead of a shutdown and than pressing power)?
Many thanks in advance,
Sjoerd-Jaap Westra

sjwestra
I apologize for the delay in responding to your post. First I am glad you were able to resolve your initial issue and to help I have included a link to a document 'Bios Setup Utility Information and Menu Options' that will provide you with instructions on how to enter the Bios and provides additional information on navigating it as well.
http://goo.gl/HIclUV
If you need any further information please re-post.
Thank you for your post.
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

I am having problems shutting down my MacBook Pro. I go to the apple and click shutdown or restart, it appears the shutdown process starts, the screen goes blue and the little circle keeps going round and round, but nothing happens even after 30 minutes.

I am having problems shutting down my MacBook Pro. I go to the apple and click shutdown or restart, it appears the shutdown process starts, the screen goes blue and the little circle keeps going round and round, but nothing happens even after 30 minutes.

Make sure you quit all your applications before shutting down.
And try resetting the SMC.
Intel-based Macs: Resetting the System Management Controller (SMC)

My iMac restarts directly after shutdown

When I shutdown my iMac 24'' (alu), it restarts after some seconds.
Is there any my way to find out, if there are some scheduled starts, which may be responsible for
for the start of my iMac after shutdown. This bug occured after update to 10.6.2 and update of eyeTv to 3.2. I don't know, who is responsible for this.

EyeTV 3.2.1 is crashing when I reload pages in Safari, sometimes, but no restarts.
What happens if you boot from the SL DVD...try that and check with Disk Utility, etc.
Did you update via Software Update or did you download the combo? If you used Software Update, get the Combo updater instead and re-apply:
http://support.apple.com/kb/DL959

Pbook restarts alone after shutdown !!!!

Pbook automaticaly restarts after shutdown
It doesn't happen if I shutdown from another system on an external HD.
What can I do ?

HI and Welcome to Apple Discussions...
Might be a good idea to boot from your install disc, run Disk Utility to Verify and if necessary, repair any errors on the startup disk.
Insert your install disk and Restart, holding down the "C" key until grey Apple appears.
Go to Installer menu and launch Disk Utility.
Select your HDD (manufacturer ID) in the left panel.
Select First Aid in the Main panel.
*(Check S.M.A.R.T Status of HDD at the bottom of right panel. It should say: Verified)*
Click Repair Disk on the bottom right.
If DU reports disk does not need repairs quit DU and restart.
If DU reports errors Repair again and again until DU reports disk is repaired.
When you are finished with DU, from the Menu Bar, select Utilities/Startup Manager.
Select your start up disk and click Restart
While you have the Disk Utility window open, look at the bottom of the window. Where you see Capacity and Available. Make sure there is always 10% to 15% free disk space.
Carolyn

After shutdown I have to log in twice. The first time it starts to load, then goes black, then gives me login page again. Do you think I have a virus? Or is this Yosemite bug?

Just updated to Yosemite on my MBP. After shutdown now when I login, it starts the process (the bar starts to move), then the screen goes black, then it asks me to login again and this time it is a successful startup. Is this a Yosemite bug or do I have a virus? I also have some funny tiling on the screen at youtube and some other websites. Another bug?

Reinstalling OS X Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall OS X: Select Reinstall OS X and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
Also see:
Reinstall OS X Without Erasing the Drive
OS X Yosemite- Reinstall OS X
OS X Mavericks- Reinstall OS X
OS X Mountain Lion- Reinstall OS X
OS X Lion- Reinstall Mac OS X
Note: You will need an active Internet connection. I suggest using Ethernet
if possible because it is three times faster than wireless.

Startup open ORA_12514 error after Shutdown, just upgraded 9i to 10g

Hi,
Noobe here, again! Cheers and happy New Year to all!
How should I edit script to start db that has been shutdown prior to backup?
We are having a problem with backups, failure is occurring executing SQL*Plus startup after shutdown. I successfully upgraded our 9i to 10g, 10.2.0.5.0 on Windows server 2003, 32-bit. We have a back_script.bat that runs all this, the only edits that I had to make within this were the names for the new Oracle services, but that is not a problem. When I run through the actions in the batch file, it fails at the sql>startup open; action, throws the error "ORA-12514 TNS:listener does not currently nkow of service requested in connect descriptor" What is different here between 9i and 10g that now this doesn't work? By commenting out the line calling our oracle_stop_start.sql I am getting successful >exp dumps, but there could be processes running 'cause I'm not stopping everything before proceeding with the export.
I have a complete image of the physical server running in a virtual that I am able to test on. Hopefully I'll not put too much info in here, but here is some background! Both the batch file and little stop_start script predate my involvement.
Here are the pertinent statements in our backup_script.bat:
SET NLS_LANG=AMERICAN_AMERICA.UTF8
SET ORACLE_SID=wind
net stop Windchill3_MethodServer (the third party application that uses the database wind)
sqlplus "system/manager@wind as sysdba" @D:\ptc\windchill\backups\oracle_stop_start
exp system/manager@wind owner=guest file=......\oracle_backup.dmp.....etc, etc, etc
Here is oracle_stop_start.sql
shutdown immediate;
startup open;
quit
As stated earlier, this has worked at least since 2007 when the last edits were made to the batch file. Now it fails at the sql>startup open; throwing the error ORA-12514. I can duplicate this executing each statement in a dos shell. The shutdown command closes, dismounts and shuts down the database. I have tried changing the startup statement to sql>STARTUP OPEN wind; but that makes no difference. I have found that if I exit sql*plus and log back in /nolog (in the same shell window) then I can restart the instance, what I do is:
sqlplus /nologsql>connect sys/* as sysdba;
sql>startup open wind;
This does successfully start the Oracle instance, mount and open the database. How else might I do this? I can certainly duplicate these actions, adding the necessary lines to oracle_start_stop.sql, but is there a better & cleaner way to do this? Right now I just want to make these existing scripts work. Once that is done, then I'm going to investigate and learn more about RMAN and datapump export/import and update our backup procedures.
Any thoughts & suggestions?
Thank you,
Tom

It might be a difference in behaviour between 9i and 10g. It looks like you are connecting through sql*net (sqlplus "system/manager@wind as sysdba), so the ORACLE_SID setting is not part of your connection. When the database is shutdown you are no longer connected to any database. When you issue the startup command the ORACLE_SID is not set so there is no service specified.
If you are running this on the database server, try setting the ORACLE_SID then running your script like:
{code}sqlplus "system/manager as sysdba" @D:\ptc\windchill\backups\oracle_stop_start{code}
and you should still have the service set for your connection.
John

N95 time and data loss after shutdown

Hi! I own an unlocked N95 mobile phone with firmware version 12.0.013. The problem is that after shutdown and restarts the time and date is lost. I have disabled the option to get the time from the network operator. I have read on other forums that many other users have this problem too. Is this hardware or a firmware problem? If it's a firmware problem, when can I expect a firmware update that will fix it? My second question: are there different firmware versions for each language, because the T9 dictionary is very unusefull in the Romanian language. Many frequent words are not recognized, other are misspell. Does a firmware include an updated dictionary too? In advance, thank you very match.

Hi,
I have the same problem. Am also on firmware V12.0.0.13 (what ever it is).
I dont know exactly when my problem with lossing the date and time started but I dont think it was after i changed firmware.
I think the problem started when I had to formated my phone. It was running slow and getting temprimental. In fact am sure the date and time loss thing all started after I formated the phone.
The date and time is the only info I loss when I remove the battery every thing else is ok.

T400 restarts automatica​lly after shutdown

Similar Messages

Maybe you are looking for

T400 restarts automatically after shutdown