T400 WWAN Adapter Issue

I've successfully utilized WWAN capability on a T400 for a long time. So, now it's not working all of a sudden??? Device Manager says "Device Working Properly", radio is visible along with Wi-Fi and Bluetooth. Just doesn't show Broadband connections available at all??? I've tried disable/enable thing. Prior to this problem, i completely removed battery, since it's worn out. Can that affect behavior of WWAN adapter??? Has anyone encountered similar thing??

Open command prompt window and type in the following string:
netsh mbn sh read int=*
...copy and past output here (replace the values with ***, for instance, for your privacy, but confirm if they persist)
And another one command:
netsh mbn sh rad int=*
x220 | i5-2520m | Intel ssd 320 series | Gobi 2000 3G GPS | WiFi
x220 | i5-2520m | hdd 320 | Intel msata ssd 310 series | 3G GPS | WiFi
Do it well, worse becomes itself
Русскоязычное Сообщество English Community Deutsche Community Comunidad en Español

Similar Messages

Video Adapter Issues?

I just went through a download of recommended Lenovo updates and now have problems starting up the computer. I get consistent blue screen telling me that I may have memory or video adapter issues. Is this a video adapter or is there another cause? I wasn't getting this prior to the update at the end of July...

What ThinkPad exactly are we discussing here?
Cheers,
George
In daily use: R60F, R500F, T61, T410
Collecting dust: T60
Enjoying retirement: A31p, T42p,
Non-ThinkPads: Panasonic CF-31 & CF-52, HP 8760W
Starting Thursday, 08/14/2014 I'll be away from the forums until further notice. Please do NOT send private messages since I won't be able to read them. Thank you.

T410 Network Adapter Issue

I have a Lenovo Thinkpad T410 with WIndows 7 . It has "Intel 82577LM Gigabit " network adapter. The issue is that , sometimes, my laptop doesn't connect to the internet. The problem is very intermittent. There is no issue with my wired network connectivity , as I'm able to connect to my Sony Vaio Windows 7 laptop without any problem.
I have tried everything I could get on Internet forums. I updated the network driver also. But the issue still occurs sometimes, and after a few hours , inexplicably, it starts working fine.
Any help would be most appreciated.
Thanks,
Suraj

If you're talking about wired connection, try this:-
1. Click the "Start" button and choose "Control Panel" from the Start menu.
2. Click "Device Manager" on the "Control Panel."
3. Click the arrow icon next to "Network Adapters" to extend the category.
4. Right-click on your network card and choose "Properties" from the menu.
5. Navigate to the "Power Management" tab.
6. Remove the check in the box next to "Allow the computer to turn off this device to save power."
7. Click the "OK" button to confirm the new settings.
Let us know how it goes.
Maliha (I don't work for lenovo)
ThinkPads:- T400[Win 7], T60[Win 7], IBM 240[Win XP]
IdeaPad: U350
Apple:- Macbook Air [Snow Leopard]
Did someone help you today? Compliment them with a Kudos!
Was your question answered today? Mark it as an Accepted Solution!
Lenovo Deutsche Community Lenovo Comunidad en Español
Visit my YouTube Channel

Sender Mail Adapter issue

Hi All,
We are getting this error in Sender Mail adapter.
"exception caught during processing mail message; java.net.ConnectException: A remote host refused an attempted connect operation"
It is a (Lotus Notes) Mail to File scenario.
Used POP3, and gave the URL as POP:// ** .
I have tried pinging the server and getting a good response.
I have also tried the OS01 ans it returned a response : Program Terminated.
I am not sure if the POP3 port is enabled.
Are there any check points we are missing ?
Please throw some light on this as we need to solve this asap ..
Yashwanth
Edited by: YashwanthSVK on Aug 2, 2011 7:18 PM

Shabarish is right.
This seem a connectivity issue. Try to ping Mail server from your PI System and check pop3 port.
This document can be helpful for you:
http://wiki.sdn.sap.com/wiki/display/XI/SMTPConfigurationinSAPXI

Magsafe adapter issue

I purchased a non apple 60 watt magsafe adapter after my 2 year old macbook pro was having issues, I replaced the battery with a apple battery and the non charging issue continued, I would have to wiggle or place a phone on adapter where it magnetically attaches to laptop to get it to charge. The light goes on and off at will, and in order to chjarge it I have to play with it. The second adapter I bought worked great for 67 cycels and is now doing the same thing.. IS it the adapter or something more sinister? I tried to inform apple of the issue a few years ago and did not get anywhere. Any advice?
Thanks

These kinds of problems lend themselves really well to analysis at the genius Bar, if you can get to one. The guys there put their hands on Macs all day every day, and the physical stuff is what they know best.
Your appointment at the genius Bar is free, in warranty or out.

AC Power Adapter issue with new (refurbished) ibook...

I just got my refurbished ibook today and went to plug it in and test it, and then wanted to charge the battery on it. At first I thought it wasn't doing anything when I went to turn it on (it made the starting sound but the power button didn't turn on or anything), but then after trying a couple times, I noticed that the black screen had a faint image of an apple on it. I had the screen too far to the front for me to see it clearly (as it's an lcd screen) and later when setting my preferences, I had noticed the brightness was just too dim which I adjusted...
So the power button never did glow when it was turned on (at least I didn't notice it after I got it booted up). My adapter's plug fits loosely in the socket on the laptop but still glows green, but all the time... Isn't it supposed to glow orange when charging??? Well I was setting up everything and did my power management settings as well, and as I have it set up to show me my battery level on the desktop, I was noticing that it was depleting (at what I would guess is a normal pace for my current settings), it started off around 83% and had gone down to 58% or so after about 1 and a half hours with highest settings basically. But my power adapter was plugged in the whole time... Shouldn't it be using my AC power and not the battery's?
So I turned it off and now it is sitting there (hopefully charging), but that little green light on the adapter where it plugs into the laptop is just that, still green...
Does all this mean that there is a problem with the power adapter and its ability to actually charge my laptop? I got this refurbished (from TigrfDirect) with a 1 year warranty (from Apple) so this should be covered, but as I just received the thing today, I really don't want to have to deal with a messed up AC Adapter...
Also, I haven't even yet checked the battery itself to see what # it is and if it is one of the ones that is part of the recall or not... I would hate to have to do that and not have a working AC Adapter, though of course if the adapter is't working, I can't charge the thing anyways, so I guess I would have to wait another few weeks with dealing with Apple and the warranty issues anyways.
I looked in the help section and the only suggestion they had for if your battery doesn't charge is to take it out and put it back in and then attach the adapter again. I guess I could do that at the same time I check on the battery's recall status, I just hate opening my computer up as soon as I get it. Also the battery cover is not totally flush with the rest of the case, one corner sticks up a bit, and I think it was a replaced item as it doesn't have the little LED lights that the computer says should be there to tell me how much the battery is charged (unless this is UNDER the cover for some reason, but the cover is bright white compared to the rest of the ibook coloring, so it seems as it was just a basic replacement cover used)...
Ok, so thanks for any input you might have. I will let people know in a couple hours if the ibook has actually charged at all during that time or not...

So I did the reset button thing and it didn't do anything at all... If I plug in the power adapter without the battery the laptop will not turn on at all, so I am guessing that it definitely is the adapter and will have to contact Apple to somehow get a new one. Oh great, tomorrow's Friday and isn't this a holiday weekend? Which means it will probably take even longer to get them to send me a replacement adapter... You think that buying a refurbished mac would mean that they would have tested out all the parts/components first before reselling it...
And so while I was at it, I checked on my battery's model # and serial # and it is one of the ones on the recall list. I think I was right that it had been replaced (now that I know that the battery is part of the back cover) which would probably explain the recall battery as this is one of the older ibooks and should have been one of the lucky ones made before the ones on the list... I did get to see the lights (only 3 though) flash solid green for about 3 seconds when replacing the battery back into the laptop.
One good thing did come out of this... As I was taking the keyboard out to find the computers serial # (I already filled out my form for the new battery), I was surprised to see an Airport card. Not that it would have surprised me too much in the first place except that it wasn't listed in the details/parts list when I bought the laptop. It was also listed that my laptop had a 10GB hard drive (while the picture on the website showed a 30GB one). The box it came in said 30GB as well, but I just dismissed that. I had went to see how much space I had left on the HD to see that it had 13.99GB and this is after any formatting, and the install of OS 10.2.8 including OS 9.2.2... So a few added bonuses to help make up for the fact that it is NOT is as good shape as I was expecting (or should be to even be sold as a refurb IMO), and the fact that the AC adapter is completely faulty.
I just hope that I can get a new AC Adapter soon, so that I can at least be able use my laptop with some kind of power until the new replacement battery shows up. This must be some kind of terrible joke. I get the laptop to be able to use it for a few hours and then have it be without ANY kind of power for posibly up to 2 months? I seem to have the worst luck with Macs, which makes it strange as I have never had any problems with all the PC's I have ever used (and I started using computers when I was 4) but I have now had an imac die (possibly the HD), an Apple studio monitor start flashing on the screen possibly due to connector problems, and now this (and all within 2 months). I am almost ready to just give up, but I have spent too much time and money on all this mac stuff (and all for my obsession with OS X) to do it just yet.
So please tell me macs aren't always this horrible, or else I will have to make up my own commercials where PCs are better because at least they turn on and boot up for more than 1 week (I think I had the imac working for about 5 days total before it would boot with errors).
Or some kind soul could also mail me a working AC Adapter that would work with my ibook (if you happen to have a spare), so I could get to do more on it other than changing it's settings... I now only have 40% battery life left. I don't think I should even turn it on again as the boot up alone would drain away too much precious juice...

2011 Mac Mini and Acer x222w monitor incompatible? HDMI to DVI adapter issue

I am totally bummed because I just bought a new Mac Mini thinking I'd be able to use the display from my old system, an Acer x222w, which has both DVI-D and VGA connections. I hooked the monitor up using the HDMI to DVI adapter included in the box with the Mini. On boot, I could see the Apple logo, though it was not centered, and when the set up screen came up to the select language screen, it flashed quickly and then turned to snow.
I was on the phone with Apple support for over an hour trying to troubleshoot this issue. I was a little disappointed that tech support didn't even seem to be aware that the Mini came with an HDMI to DVI adapter. It was then recommended that I try an adapter for the mini display port, which the 2011 Mini doesn't have.
I was able to borrow another monitor, a Dell with DVI-D, and it worked.
I have searched for specs/requirements that might explain why the Acer monitor doesn't work while the Dell one does. I cannot find anything from Apple. I just assumed any DVI connection would work. Has anybody else encountered this problem? Most of the issues I've found on the forums involve trying to hook up to a home theater LCD TV, which I'm not trying to do. If I had known my monitor wouldn't work, I probably would have just saved up for an iMac.
Thanks in advance for any thoughts or tips!

Try resetting the SMC andNVRAM
Intel-based Macs: Resetting the System Management Controller (SMC)
About NVRAM and PRAM
Next call Apple since yo have 90 days of free telephone support
Complimentary Support (USA)

T400 LCD dim issue - Need help!!

I'm having a LCD dim issue with a T400. Have changed the LCD panel, LCD cable and systemboard but still having same issue. If i removed the lcd card, then the display is working fine. I've tested the lcd card in another working unit and it's working as well (means the lcd card is working). I use a working lcd card and plug into this T400 but LCD still dim.
I've try to switch the problematic lcd cable and lcd panel to a working systemboard and it kills the systemboard. Have try to switch a few things but still unable to find the root cause. Urgently need help on this. Any advice will be appreciated.
Model : 6475-RM5

hey bhoh
i suggest uninstalling your current graphic card driver, let windows install its own generic drivers and see if that makes any difference
WW Social Media
Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
Follow @LenovoForums on Twitter!
Have you checked out the Community Knowledgebase yet?!
How to send a private message? --> Check out this article.

Receiver RFC adapter issue! Please help!

Hi Experts,
I have 4 XI interfaces. All of these are Webservice to RFC scenarios. Moreover all of them are synchronous.
Request message: Webservice (SOAP Adapter) ---> XI -
> RFc Adapter ---> ECC Function modules
Response message: Webservice (SOAP Adapter) <- XI < RFc Adapter <- ECC Function modules
As you can see above, external system calls XI web service via SOAP Adapter. The input data is then sent from SOAP Adapter to RFC adapter to call RFC function module in the receiving side. The receiving system is SAP ECC system.
The receiver ECC system has two instances. For example SP0 ad SP1.
In the receiver determination step we have maintained a rule such that if the Plant value in the input message is XYZ then send data to SP0. But if the plant value in ABC then send data to SP1.
This Conditional rule is working fine.
However we are getting couple of issues with only one instance of ECC (SP0).
1. com.sap.engine.interfaces.messaging.api.exception.MessageExpiredException: Message badfa070-b163-11de-a4c1-001cc495e48a(INBOUND) expired
2. NO_MAPPINGPROGRAM_FOUND. Mapping program is not available in runtime cache: Object ID C2B41FFDFD4635BAB1E41AE53C0D10CE Software Component 5394F420463611DAC1CFFBBC0A01BC16
3. com.sap.engine.interfaces.messaging.api.exception.MessagingException: No response available
The above listed errors are generated occasionally. Sometimes no errors are generated even when the same input data is sent again and message is successfully processed.
I have verified the input data and everything is OK with that.
Mapping object is available in XI and cache was also refreshed. I additionally reactivated the objects in XI as well.
So what could be the real root cause of this? Please help!
Thanks
Gopal

1. com.sap.engine.interfaces.messaging.api.exception.MessageExpiredException: Message badfa070-b163-11de-a4c1-
001cc495e48a(INBOUND) expired
Check the Timeout parameter of your adapter.....for requests which expire with this error confirm from the SAP end that the message processing is done well within the Timeout period of the adapter.
Refer this note for more info on the above occuring error and the possible way to avoid it: https://service.sap.com/sap/support/notes/791379
Update:
Even problem 3 seems to be occuring due to insufficient Timeout specified for the adapter.....if possible try increasing the Timeout in VA
Regards,
Abhishek.
Edited by: abhishek salvi on Oct 6, 2009 1:42 PM

File adapter issue in Linux enviornment

hi'
I am deploying BPEL in Linux enviornment, and with the file adapter read operation I am reading a test.xml file this file is internally refering to emp.xsd (files are below), now the issue is the file adapter is reading XML file even if it is invalid, this was not the case in windows XP enviornment, please advice why it is behaving like this.
Also the path of my XSD is "/home/wsfbpel/public_html/XSD" and the file has all read write permission (chmod 777 filename)
XSD
*<?xml version="1.0" encoding="windows-1252" ?>*
*<xsd:schema xmlns:xsd="http://www.w3.org/2001/XMLSchema"*
xmlns="http://www.example.org"
targetNamespace="http://www.example.org"
elementFormDefault="qualified">
*<xsd:element name="readfile">*
*<xsd:complexType>*
*<xsd:sequence>*
*<xsd:element name="name" type="xsd:string"/>*
*<xsd:element name="empid" type="xsd:string"/>*
*</xsd:sequence>*
*</xsd:complexType>*
*</xsd:element>*
*</xsd:schema>*
XML (this is clearly invalid with respect to XSD it is refering to)
*<?xml version="1.0" encoding="utf-8"?>*
**
*<tns:readfile xmlns:tns="http://www.example.org"*
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="http://www.example.org /home/wsfbpel/public_html/XSD/emp.xsd">
* <tns:name>yatanveersingh</tns:name> *
* <tns:empidname>6499</tns:empidname>* +(incorrect element name)+
*</tns:readfile>*
thanks
Yatan

Hi,
My problem got resolved.
There was some access issue to see the txt files at the File Directory.
Thanks.

DataBase Adapter Issue

Hi all,
When i try to query the table using the Database adapter , i m getting the following error message
*" ORA-04030 : out of process memory when trying to allocate 2024 bytes( kxs-heap-c,kghsstk)* "
Experts please post the possible resolution for this issue..
Thanks in Advance,
Karthik

Hi-
Is the Database and Weblogic installed on same machine ??
When you execute queries from SQL worksheet this is the only program that is consuming memory..
But when you run from DB Adapter both your adapter and database consumes the memory and datbase is not able to get the required memory to run the script..
I am not quite sure of the issue, u can check the task manager and find it out when executing the program

Standalone (J2SE) adapter - axis SOAP adapter - issue duplicate messages

All,
Perhaps you can help me. I've setup a scenario where an standalone (J2SE) adapter sends a file to SAP XI channel, configured on the central adapter engine, of type SOAP configured to use Axis servlet.
The connection is setup and the standalone adapter channel logs thre response from the SOAP channel which reads HTTP error 500, indicating a duplicate message.
SAP has identified this problem and proposes in the FAQ for Axis (note 1039369) to set on the SOAP channel module CallSapAdapter property ignoreDuplicate to true in the module processor.
I've implemented this as suggested however found the problem persists. I'm still receiving an HTTP 500 error.
Your help is much appreciated solving this problem.
Thanks
Harald

As there was a bugfix recently, make sure that you have installed the latest patch.
If this does not work, open an OSS ticket for this issue.
Stefan

Decentralized J2se adapter issue

Dear Gems,
My J2se adapter is configured to pick a file and archive to a different folder.My current issue is
Adapter pics the file posts to Integration server and while archiving it creates 0kb file with the below error.
This is not happening all the time. can any one guess?
Log:
Oct 14, 2010 1:42:30 PM ...i.messaging.adapter.File2XMBProcessor [Thread[nterface,5,main]] Error: Confirmation failed: Moving sent file 'sample file path.xml' to archive failed
java.io.FileNotFoundException: Sample file path.xml (No such file or directory) at java.io.FileInputStream.open(Native Method) at java.io.FileInputStream.<init>(FileInputStream.java:135) at com.sap.aii.messaging.adapter.File2XMBProcessor.archiveFile(ModuleFile2XMB.java:2123) at com.sap.aii.messaging.adapter.File2XMBProcessor.processFileAccess(ModuleFile2XMB.java:1928)at com.sap.aii.messaging.adapter.File2XMBProcessor.run(ModuleFile2XMB.java:1009) at java.lang.Thread.run(Thread.java:811)
Thanks
Prabhakar Teegavarapu

Hello Prabhakar,
This problem is solved in a patch.
Please read this SAP note:
1492379 - Archived file in FTP Sender Communication Channel is empty
This note may also be helpfull, even though the description of it doesn't match your issue.
SAP note 1225693.
Enjoy the weekend!
Jorge Eidelwein

FTP Adapter : Issue with Non English Text.

Dear All,
We are trying to read a file which contains Korean Language and write into a different folder in a CSV format.
The output file contains "???" inplace of Korean text.
We can see the invoke to FTP adapter contains Korean text as part of it's input. But the CSV file contains "???"
<FinalTradeCardList>
<imp1:FinalRows>
<imp1:C1>NO</imp1:C1>
<imp1:C2>사이트코드</imp1:C2>
<imp1:C3>사이트명</imp1:C3>
<imp1:C4>승인일자</imp1:C4>
<imp1:C5>주문번호</imp1:C5>
<imp1:C6>주문자</imp1:C6>
<imp1:C7>주문자연락처</imp1:C7>
<imp1:C8>카드종류</imp1:C8>
<imp1:C9>승인번호</imp1:C9>
<imp1:C10>거래상태</imp1:C10>
<imp1:C11>거래상태일시</imp1:C11>
<imp1:C12>할부</imp1:C12>
<imp1:C13>거래금액</imp1:C13>
<imp1:C14>비과세공급가액</imp1:C14>
<imp1:C15>과세공급가액</imp1:C15>
</imp1:FinalRows>
</FinalTradeCardList>
What needs to be done in BPEL to get Korean Language text in CSV file.
Thanks,
Sid.

Thanks for your reply.
I used the character set as you suggested.But it is not getting converted correctly.
Actual Value : (유)라이프테크놀로지스코리아
Converted Value : ( $)C @/ ) 6s@LGAEWE)3n7NAv=:DZ8.>F
I tried all others that are mentioned in the document. Still i am seeing different values. I am not getting the actual value.
But in BPEL i see correct value getting passed to FTP Adapter.
The character set is in XSD. Please find it below..
<?xml version="1.0" encoding="UTF-8" ?>
<xsd:schema xmlns:xsd="http://www.w3.org/2001/XMLSchema"
            xmlns:nxsd="http://xmlns.oracle.com/pcbpel/nxsd"
            xmlns:tns="http://TargetNamespace.com/DeleteMe"
            targetNamespace="http://TargetNamespace.com/DeleteMe"
            elementFormDefault="qualified"
            attributeFormDefault="unqualified"
            nxsd:version="NXSD"
            nxsd:stream="chars"
            nxsd:encoding="ISO-2022-KR">
<xsd:element name="Root-Element">
    <xsd:complexType>
      <xsd:sequence>
        <xsd:element name="Row" minOccurs="1" maxOccurs="unbounded">
          <xsd:complexType>
            <xsd:sequence>
              <xsd:element name="C1" type="xsd:string" nxsd:style="terminated" nxsd:terminatedBy="," nxsd:quotedBy=""" />
              <xsd:element name="C2" type="xsd:string" nxsd:style="terminated" nxsd:terminatedBy="${eol}" nxsd:quotedBy=""" />
            </xsd:sequence>
          </xsd:complexType>
        </xsd:element>
      </xsd:sequence>
    </xsd:complexType>
</xsd:element>
</xsd:schema>
Please review the above and help me in resolving this issue.
Thanks,
Sid.

Receiver AS2 Adapter issue.....Failed to get configuration from DATABASE. S

Hi,
Iam doing prototyping for File -AS2 adapter and ended up with below erros.
Error type: COMPONENT_ERROR >> Error date: 6/17/11 8:04 AM >> Description: AS2 Adapter failure Outbound configuration error: Failed to get configuration from DATABASE. Sender configuration incomplete - perhaps AS2ID missing.. com.seeburger.as2.AS2Plugin.execute(AS2Plugin.java:379) [6/17/11 8:04 AM]
and
Message processing failed. Cause: javax.resource.ResourceException: Fatal exception: javax.resource.ResourceException: SEEBURGER AS2: AS2 Adapter failure # Outbound configuration error: Failed to get configuration from DATABASE. Sender configuration incomplete - perhaps AS2ID missing.., SEEBURGER AS2: AS2 Adapter failure # Outbound configuration error: Failed to get configuration from DATABASE. Sender configuration incomplete - perhaps AS2ID missing..
The setting i have made during configation are :
1> Reciver Party with Agency,Schema and Name entered.
2>Identifiers for both Sender and reciver channel fileld with values seeburger and AS2ID.
3>Used Sender uses Virtual reciver in sender aggremnet.
4> Reciever CC have modules localejbs/Seeburger/solution/as2 and localejbs/ModuleProcessorExitBean in sequence.
Please provide solutions to overcome the issue.
As this is prototyping, i have downloaded Free As2 client and trying to send files to that client from PI.

Hi Dinesh,
make sure to also configure a report channel (refer to the sample chapter in the SEEBURGER AS2 documentation) in order to receive AS2 MDNs for your sent message. Additionally report channels are needed if the SEEBURGER specific TransmissionReports are requested.
Hope that helps
Greetings
-Sascha-

T400 WWAN Adapter Issue

Similar Messages

Maybe you are looking for