T410 lots of case problems

Hi, in advance i'm sorry for my language misstakes, i'm from poland.
I'm new user of ThinkPad T410. laptop got to my hands about 2 weeks ago and only few days ago I spotted that there are 2 or 3 places on the lower part of case that are flexing under pressure - under touchpad, whole edge of the case is bending. but the worst thing is that lock from opening the case is giving annoying sound when moved, it's sound of stretched small spring. does anyone have such problems? is it classifing under quarranty? thanks for any help and tips. sorry for misstakes once again. cu

This kind of problem must to be solved by warranty. Call customer service and they will inform you how to proceed.
Regards.
IPnaSh
First Spanish Community Guru - Colaborador ad honorem

Similar Messages

Is Mavericks good to go, or are there lots of teething problems to be sorted yet?

Is Mavericks good to go, or are there lots of teething problems to be sorted yet?

Donald Morgan wrote:
There are normally very small bugs but at this point will not affect the operation of Mavericks. I might add is the most stable and smoothest Operating System since OS9-2
Good to know! OS 9.1 is my favorite OS to date. Tiger & SL running in close 2nd.
Me personally, I will not upgrade until OS 10.9.02 is released.

Personal hotspot missing and music volume not working and lots of other problem after updated 4s to ios8 ? Apple disappointed this time badly.

Personal hotspot missing and music volume not working and lots of other problem after updated 4s to ios8 ? Apple disappointed this time badly.

GO to Setting > Cellar Data > VPN Settings > Add any user and password under Personal Hotspot, then you will see it's activated again as usual

Yoga 13 - Lot's of problems and no answers from Lenovo

Hi everyone
Just wanted to post my experiences with the Yoga 13 issues and explain the problems and what Lenovo is doing (or mostly not doing) in relation to these. I have been dealing with this for 9 weeks now already, for the first 7 weeks I remained quite calm with them about it. After that I’m afraid the situation has had to be escalated considerably. I won’t go into the full details of everything that has happened as it would take all day. Suffice to say that Lenovo have been terrible to deal with, lied continually and ignore anything they don’t want to do (much like on this forum).
I appreciate that not everyone seems to be having all of these issues. But each of them is widely reported on Lenovo’s forums here. Lenovo accept it conversations with me that these are all valid issues with the Yoga and justify it by saying that Ideapad laptops are not as good quality as Thinkpads.
Also worth stating is that my work is in an advisory role for a company that is a large Lenovo customer. This should never have been a consideration as the Yoga was a personal purchase. Unfortunately Lenovo chose to involve their sales people and teams who I deal with for work related issues. This only really meant that internal communication at Lenovo between departments was even worse than usual and it meant different departments offered different things and gave different explanations. I wanted to be treated as any other customer would be who had purchased a Yoga 13.
Wifi card, range and signal strength are terrible. It also drops connections and sometimes won’t wake from sleep. During general usage the low quality, cheap realtek wifi card proves to be very poor. It is connected via an internal USB hub which goes someway to explain why it has sleep issues. For some reason Lenovo decided to design this computer with the antennas beneath the keyboard under a layer of metal shielding. This already provides a terrible level of signal. Couple this with the two additional layers of metal on the top and bottom of the machine and turning it into tablet mode seriously reduces the wifi strength even further. This is a flawed design decision and I consider it a fault, especially considering the pricing of this computer. Due to the wireless issues the computer drops connections often and many times won’t reconnect. I set up the yoga after it’s replacement wifi card next to a Thinkpad, Macbook Pro and Sony Vaio, all of the other computers connected at more than twice the speed that the Yoga is able to even at only 6ft from the wifi access point. If Lenovo wish to charge so much for a laptop and advertise it as having ‘n speed’ wifi then it should be comparable to other similarly priced laptops. While not a fault, I also find the inclusion of only a single band 2.4ghz wifi card to be quite unacceptable considering the price of the computer, no other competing products choose to go for such low quality components in their premium priced products, it is simply not fit for purpose. Lenovo accepted the wifi as a major issue with the U310 and U410 models but of course making any kind of statement of a known problem will be costly for them, so they choose to ignore customers as it is less expensive to deal with.
I find it interesting that some users report their wifi as being perfect. I would ask anyone who claims this to connect it along with another laptop to the same network and move more than 15 ft from the router and try to copy some files across the network. Compare the two and see the difference. If you already have less than a 20Mbps internet connection and don’t use your wireless network for anything other than internet access quite close to the router then you’ll probably not have the same problem as much.
Solution: There is none. Lenovo will replace the wifi card for another one under the warranty but it won’t fix the problem and the flawed design. For a proper solution to this problem then read at the bottom of this post regarding replacement/refund options that Lenovo are offering in this situation. Fiddling with wifi settings and routers is not a solution when every other computer (including Lenovo ones) works perfectly on that network.
The touchscreen cuts out and requires a reset to start working again. During operation the touchscreen simply stops responding. A full reset is required to make it work again. The fact that a reset fixes it instantly shows to me that this isn’t a hardware fault. It is a further example of Lenovo’s flawed design and also perhaps a software issue. The touchscreen is also attached to the internal USB hub, whether this is related to the wifi problem above I am unsure. This is completely unacceptable on a touch based device and is not fit for purpose.
Solution: There is none. Lenovo will replace the touchscreen under the warranty but it won’t fix the problem and the flawed design. For a proper solution to this problem then read at the bottom of this post regarding replacement/refund options that Lenovo are offering in this situation.
The autorotate stops responding. Again as a tablet device the autorotate is an important feature. Since coming back from repair with Lenovo it has started occasionally not responding. I was told to flip the machine over, open and close and press the ‘autorotate on/off’ button a few times as a solution. This is not an acceptable solution on an expensive machine and is not fit for purpose on a tablet based machine.
Solution: Lenovo recommend pressing the button a few times and opening and closing the lid. Restarting also might help. This is not a solution.
The keyboard is extremely low quality, bounces and is uncomfortable to use over an extended period. Lenovo have always been well known for producing great quality keyboards. However the cheap one they decided to put on the Yoga is really not fit for purpose. It is a simple panel keyboard that is secured in place using double sided sticky tape. Seriously, a taped down keyboard on a premium priced computer! It started to come up in one corner and pivots around several of the keys in the upper right corner. I added more double sided sticky tape under it to better secure it (as recommended on Lenovo’s customer support forums), this worked for a short while to hold it down better. The keyboard was replaced by lenovo as part of the repairs. It is still bouncy though, low quality and uncomfortable to type on for extended periods.
Solution: Lenovo will replace the keyboard under warranty. But the new one is still stuck down with double sided sticky tape.
The touchpad sticks and occasionally stops working. As the touchpad is the same as others used in competing products I can only assume this is a driver related issue. However, as the Yoga has been released for 6 months now it should have been addressed with a driver update by now. Lenovo don’t seem to care about this. They will replace it under warranty, but it won’t fix anything.
Solution: Lenovo will replace the touchpad under warranty. The new one will still be the same.
The paint peels off the corners of the device’s metal top and bottom. Due to the soft touch paint finish applied to the metal top and bottom of the machine then it rubs of in high usage areas such as the hinge and the corners. The aesthetics of a premium priced computer are actually important and it should not happen. This appears to be a flaw in the design of the machine again and makes it unfit for purpose.
Solution: Lenovo will try to tell you that it is not covered by the warranty and that you did it yourself. After a lot of pushing they will replace both the top and bottom panels under the warranty.
Lenovo, particularly their service centre team, are very unresponsive to questions about these issues. They will claim on first ask that they have no knowledge of any of these issues. Then they will try to blame the user and how they use the machine. After further pushing they actually will start to do something.
Options available to customers. These have all been offered to me by Lenovo over the last few weeks.
Repair: Lenovo will take in your machine for repair and replace every single component (as they did with mine). They refuse to replace the machine initially as the terms of the warranty state ‘repair’. This will not fix the issues as it is due to flawed design and cheap internal components. I have had mine taken in now 4 times, of which they kept it for a week twice now.
Sell it privately with free product compensation: This was a very strange offer and one I felt a little uncomfortable about. Lenovo offered that if I chose to sell the machine privately (as they have so many problems) then they would give me a free Thinkpad Tablet 2 as compensation for the loss of value. I thought about this but turned them down, it seemed a little too dodgy to me.
Replacement with another Yoga: Lenovo offered me a replacement Yoga machine. They claimed a couple of weeks ago that a new model was arriving with a revised wifi design and CPU. Unfortunately when these arrived in stock (these are the ones reported a few posts back) they found they still have the same Realtek wifi card and flawed antenna design. So they quickly told me they didn’t want to do this anymore and offered new options. I would have been happy with the option if they had fixed the issues in the new one.
Replacement with a Lenovo X1 Carbon Touch at no extra cost: I have been offered a replacement for my Yoga with an X1 Carbon Touch. It is the only other machine in Lenovo’s product lineup that has an equivalent specs list. I said that this was a perfectly acceptable solution but they have since pushed me into the final option, refund.
Refund: Lenovo have offered me a full refund for the machine even though it was bought from a retail shop. In Hong Kong we are not lucky enough to have 30 day returns and things like that so shops don’t want to be involved after 7 days. Lenovo have said that they will issue a full refund to me. This was the option they chose in the end of the three acceptable ones. However they are now kicking their heels on it and have told me it will be another 3 weeks before they can think about doing it.
Although reading these may seem like Lenovo have attempted to do their best. Unfortunately that couldn’t be further from the truth. This has taken nearly 10 weeks of my time so far. Lenovo have attempted at every step of the way to tell me it is not covered by warranty or that the issue does not exist (or is my own fault). I have had to create videos showing the problems, document and take photos of everything. They have hardly ever initiated a conversation about this and I have had to make every single call. It reached the point where I had to threaten legal action before they finally offered some proper solutions.
My recommendation for anyone thinking of buying a Yoga 13 is to think again. Although some people seem happy with theirs, I can’t see that any of the machines can really be perfect with so many flaws. The price is the same as other premium machines from Apple, Sony, Asus and Samsung. Buy one of these and you will be much happier.
For those that already bought one and has problems then it is a little bleak without some arguing. Lenovo are ignoring the problems posted here on the forums and trying to tell customers that ‘no one else is having that problem’. It took a lot of online attention before they accepted the flawed design with the U310 and U410 models. My hope is that they do take notice of their customers in this case but I am very doubtful that they will as it would cost them money (they are after all a business so money comes first over customers). If anyone would like to follow up with Lenovo and would like to reference my case when seeking the resolution options then I will post my customer service reference numbers when I get back to the office on Monday. I am based in Hong Kong but Lenovo warranties on the Yoga are international so I feel options should be the same for all customers.
Maybe my expectations are too high, I just expected a computer that costs more than $1000 to work properly out of the box.
Moderator edit: Material which breaches forum rules deleted

As I don't want to install additional software to measure temparetures I can't tell you about my exact core temperatures. However, I can tell you that my fans go off again when load decreases for some time.

H E L P! Updated my iPhone and now LOTS of new problems never had before!

Everything was working perfectly. Then I updated my iPhone and iTunes software (via the automatic update which notified me this week that a new version of one or the other was available so I said "yes" and figured everything would be ok as usual).
NUTHIN' but problems ever since and yes, I have rebooted my iPhone several times, quit and restarted my Mac, quit and restarted iTunes, turned off the iPhone and on again, et al. CONTINUE to have problems - I get message:
Cannot sync. Mac sayd - Device timed out (re my iPhone). iPhone says it's syncing but when I slide the slider, it just goes to the phone like it wasn't even syncing or anything.
Mac PBook 1.5 gig ram 10.4.10
iTunes 7.5 (19)
iPhone 1.1.2
Cannot get a call out via 611 for the usual AT&T support but CAN call regular phone numbers.
HELP!!!! Everything was fine before! What in the world happened here????!!!

"From the above alone, it has to be your computer, it is the only thing left related to the phone" That's nice but Apple says it's NOT the problem so I'm not sure how it is you think you know more than they do. You know what the Genius bar guys said (all 3 of the ones I worked with)... they say they read a lot of stuff on this forum that is completely off and just full of BS and that people here tend that I should definitely take analysis and advice - such as yours - with a large grain of salt. Had you paid attention to my posts, you would have read back there that I DID bring my computer to them and they went through it and determined it was NOT the computer/Mac. THEY DON'T KNOW WHAT THE PROBLEM IS and you have less experience than they and you think you know what it is... I don't think so, buddy.
You must have stock in Apple to be so quick to come to their defense. Having myself worked for Apple, I know that Apple does its best to LOOK AT WHAT WAS DONE RIGHT AND NOT RIGHT and make improvements. And I worked on a committee that dealt with support issues. They want to know when a user feels they have not gotten what they paid for vs. your kind of defensive blather. Give it a rest, ok? I CLOSED MY CASE and Apple has already asked me to give them feedback about my experience - MY experience... not yours or colored by your opinion.
This forum is not for opinions. It's for straightening out technical issues so give it a rest and get back to the issues here which are technical only, period.
PS The amount of time required by me to go to Apple (3 visits now) out of a work day has now cost me more than the amount of money spent by Apple to replace this stuff which they say they don't know what is wrong with. And the cable you mention... they didn't swap it out. They did not replace the cable in the end - they gave me a used cheaper cable to use upon the first visit and the 2nd visit, instead of replacing the original cable, they swapped out the phone. And I have lost about 3 days on a schedule for work which I'm already behind on.
Last words - CASE CLOSED. NO FURTHER COMMENTARIES, et al needed, period.

LOTS of Memory problems on new 8 core

I just moved from my totally stable G5 running Logic Pro8 on Tiger to my new Mac Pro 8 core. I am having nothing but problems with
low memory issues. Everything is up to date and it doesn't seem to matter if I'm in 32 or 64 bit, running reason in Rewire or not. I am having
trouble narrowing down the problem. It seems to be random. I have seen a lot of posts about this but no real solutions. I'm thinking I got
a bad computer. it's 2 months old. This computer has 6 gig of RAM. I have talked with lots of friends running the same systems with
no problems. What is the latest? I have been on the phone with Apple and Sweetwater and it's all vague. A couple examples and as you can see I don't have
that much going yet. WAY less than I could run on my G5. I have also been unable to get a second monitor to work with the mini display to DVI connector
but it did work with mini display to VGA on the same monitor which is weird, and it seemed slow.
(Mac Pro 8 Core Snow Leopard 10.6.8 - Logic Pro9 9.1.5 - Reason5 (tried 6 for 64 bit as well) - APOGEE Ensemble - Omnisphere, Stylus, KONTACT4,
East West Play, Superior Drums, UAD 2 and others)

OK. Here is a perfect example of what I am dealing with. I have a song open with a movie because I am scoring today (I never had trouble on my G5 importing and workin with movies and dialogue tracks). I have Reason open
with one of the Reason5 Bass sounds, which takes alot of memory but again never an issue on my G5. I have TWO audio tracks with no plug-ins. Superior Drums, one kit. 1 ESX with a simple cymbal swell sound. I try and load a pad in Omnisphere and I get the below message. If I turn the bass into audio and quit Reason5 it will let
me load the omnisphere sound, so I'm wondering how much of this is a Reason/ Rewire issue. Again never had
trouble with this on G5, Tiger, Reason4 and Logic8. I am running at 32 bit because Reason5 is not 64 bit. Reason6 is 64 bit and even though I don't like the new interface I will pruchase it and run at 64 bit if it will
work. Again I keep hearing different things about 64 bit and 32 bit. I'm trying both and I don't see any
consistent change, still weird and random memory issues.

Lots of DW problems...please help

I've been wrestling with DW for the Mac for the past few days
and I'm about to give up...
I'm using MX 2004 7.0.1 and it's constantly crashing when I
try to upload my files (spinning wheel), everything I download from
my server reencodes simple characters like \" or - into strange
characters, even though it's inside of a block of PHP and shouldn't
be touched, and in some cases it will only download half a file!
I never had any of these problems on my PC, using the same
version of Dreamweaver and I've mirrored my settings. The ONLY
difference I can see is that in a new document, I can't set the
encoding to Western(Europe), but to Western(Latin1) or
Western(Mac).
So can someone tell me what's up? Please?

Try double checking your ftp preferences and internet
connections to make sure that it's okay there. I know that seems
wierd, but if the server is timing out on you due to a preference
you may have set (or is a default) that may cause the truncated
files and consistant "spinning ball of death"

New SSD, but LOTS of Permissions Problems

I have installed a new SSD drive alongside my 1.5TB spinning drive on my 24" 2009 iMac 2.93GHz. I used Carbon Copy Cloner to move my everything except my User account over to the new 60GB SSD.
I originally assigned the User's folder on the old drive using the Users & Groups User/Advanaced Options window to change the Home directory, but that resulted in unrecoverable crashes and I had to reinstall the OS three times until I finally left my old files on the old drive and just ran my Applications on the new drive, keeping everything else on the old drive, but not connected as a "user".
However I've run into a ton of permissions problems with every file I open and many programs that access thos files and have done this so far to fix it:
Run resetpassword on both drives in terminal when I rebooted to the Mac OS X install disk (Lion).
Run Drive Genius' repair permissions utility.
Run Disk Utility's repair permissions.
I continue to have issues with every file I use on the old drive, so I'm at a loss to fix this in place. I did read somewhere that moving your files to another drive, then reformatting then moving back can by default fix any permissions issues, so am considering this as a fix:
Move files on the old 1.5TB drive, folder-by-folder to an external drive.
Reformat the "old" internal 1.5TB.
Recopy everything on that external back on to my 1.5TB drive.
Run Repair permissions on both drives.
This isn't fast or elegant, but I want the issue fixed. I don't want to have to open "info" on every file I use and check and change every file permission before I can use it!
Any input on whether or not this is a real fix or is there a better one?
Thanks!
JoeL
Atlanta, GA

May not have anything to do with your issue but often
the master disk image loaded on your hard disk before
it leaves the factory has old (and/or odd) bits of
code on it. Plus the transfer is done as fast as
possible. Last they do not zero and erase the drive
before putting the image on it, so if there are bad
sectors they may not be marked as such and may be in
use (& corrupted).
As you are having trouble get your data off as best
you can, erase AND ZERO the drive, repartition, and
only then re-load from your Install DVD.
Takes extra time but better safe than sorry...
Well, I have no real means to do this now as I sold off my G5 already
Also, how do you zero it?
When I reformatted my G5, I picked the option to wipe and reinstall, yet when I did, the drive name and bluetooth names were still my old ones! - Not encouraging.
In any case, its clear I have a software problem, so looks like I'll need to burn a zillion dvds and start over .
Thanks.

After resetting & restoring iPad from iTunes backup, I got A LOT of a problems

These might not me "A LOT :O" for you
But for me, I'm getting sorta mad that Steve Jobs is dead, apple went ⬇️DOWN
I have 2 problems:
Problem 1: after resetting and restoring from iTunes backup, i get all the settings back. But my apps didn't. If I download them, would I have my files back? Like my minecraft worlds? I had VERY important stuff
Problem 2: when I want to download a paid app like minecraft, and I downloaded it from the same apple ID, it doesn't say 'free', nor it has a cloud, But it says $6.99. Please help me. I have IOS 7.1.1.
Thank you,
Ab

[b]SOLVED[/b]
Answer for question 1: yes
Answer for question 2: follow these steps:
1) Log out of your apple ID
2) log back in
So hard

CASE problem

The statement below has encountered a problem in forms.
select (case when a.code >=b.code then a.code else b.code
when a.code >=c.code then a.code else c.code end) test
from (select max(y.code) code from table1 x) a
(select max(z.code) code from table2 y) b
(select max(z.code) code from table3 z) c
where a.code= b.code(+)
and a.code = c.code(+)
I'm trying to get the maximum code from the 3 tables.
Can anyone help me with this?

Opps... this is the correct statements..
select (case when a.code >=b.code then a.code else b.code
when a.code >=c.code then a.code else c.code end) test
from (select max(x.code) code from table1 x) a
(select max(y.code) code from table2 y) b
(select max(z.code) code from table3 z) c
where a.code= b.code(+)
and a.code = c.code(+)

Case problems

Okay, so I have a MSI K8N Neo Platinum motherboard fitted with an AMD Athlon 64 3700+ (socket 754) in my Thermaltake Soprano case. This case came with a panel with 1 firewire connection, 2 USB connections and a Mic/audio port.
The problem is, I can't get the USB or Firewire connection to work. The mic/audio ports are not connected to the motherboard or to a soundcard and the FireWire isn't connected to the motherboard. The USB cables are connected like they should be. (Doublechecked from the case and motherboard manual, had my brother (student/teacher in Åbo Akademi) check the connections too, but they don't work at all.
I can't find anything in the bios (AwardBIOS (I use version 1.7, found from MSI's website)) which would hint in the direction of "enable extra usb" or something.
So does anyone know if it's possible for me to get the panel to work?

i would guess that you just put in the connectors the wrong way around. usually, all the usb ports are enabled by default, either if they are on the mobo's I/O pannel or just as a connector on the mobo's PCB.

A blackappworld can resolve a lots of your problem look here!!

Unlike the red power button on your phone which merely reloads your device, QuickPull will actually refresh the device, freeing up memory and increasing performance!
QuickPull Free has more than 1,000,000 users to date.
Schedule to run a QuickPull at a certain time each DAY, or multiple times each WEEK with NEW convenient scheduling features to keep your memory and performance running at its best.
You can even set a MEMORY threshold that will allow QuickPull™ to alert you when your available memory drops too low. If the memory drops, memory monitoring will prompt you to run a QuickPull™
QuickPull is extremely easy and convenient to use.
FEATURES
    * FREE
    * Simulates a "battery pull" equivalent reset.
    * Integrates with AutoStandby.
    * Ability to schedule to run daily.
    * Automatically accepts reset dialog.
    * Advanced scheduling, run a QuickPull daily or on certain days each week.
    * Memory monitoring.
    * Set your own memory threshold.
    * Prompted automatic reboots if your memory is less than your set threshold, with the ability to cancel a reboot.
    * Scheduled QuickPulls will wait until phone calls are complete.
    * Receive automatic notifications on missed resets due to a locked or holstered device.
    * 5 second warning notice can cancel pending QuickPull runs to keep from interfering with other tasks.
    * New and enhanced, user-friendly interface.
    * Toggle schedule on or off without losing any settings.
    * No technical support
    * (for technical support and no ads, please consider QuickPull Pro)
Don't forget to CLICK that BLACK or GRAY Kudos square if some one was helpful.
Also please mark it as a solution if your problem is solved.

Thanks for the replies........... They helped a lot, as I
thought.. I named the text field a different name and was using in
the code with a different name.. Thank you all people, I actually
now think that I can try the deafult object 'this.' and _parent
which were too vauge before but now within grasp.... Thanks Once
for you time and Patience! :-)

Commission Case problem in ICM module

Hi Experts,
Currently i am working in Icentive and commission management(ICM). I am facing a problem.
My functional consultant has maintained the number range for commission case. When i am trying to create the commission case by transaction CACS_BDTI_SEL_01 (or by commission system transaction CACS), it shows the error that 'No number range available for application (application name)processing'. Is the any other configration needed for rectifying this error.
Or else would i missing anything before creation of commission case?
If any link is available regarding Commission case creation and configraion?
your suggestions will be most welcome.
Warm Regards,
Shirish

Problem solved by myself.
I don't know the reason, but when i unchecked the "Batch' and 'Dialog' checkbox during declaration of number range it start working..

Nokia E90 case problem.

Hello
I've had my nokia e90 for a year or two now. It works great, its an amazing phone. The only issue I have with it is that the case 'peels off'. Similar to the effect you get when acid rain affects paint on houses. I found a replacement in Malaysia but they couldn't guarantee that I wouldn't get the same problem again and they had no warranty so I didn't take it. In the images I attached,I have a different battery cover because the original has completely corroded.
Attachments:
1.jpg ‏199 KB
2.jpg ‏194 KB
3.jpg ‏151 KB

Unfortunately there is nothing that anyone can do to help you here. We don't know the circumstances that caused it to peel or the substances it's been in contact with.
If you want a genuine case you need to visit a nokia care point and ask them to fit it for you.
http://europe.nokia.com/support/repair-and-recycle/repair/care-points

SWITCH CASE PROBLEM?

CODE
function Position(object:MovieClip, location:top || left):void
     switch(top:Boolean, bottom:Boolean)
          case top = true:
               object.y = 0;
               break;
          case bottom = true:
               object.x = 0;
               break;
Position(object,location);
COMPILER ERRORS
Scene 1, Layer 'Actions', Frame 1, Line 1 1084: Syntax error: expecting rightparen before logicalor.
Scene 1, Layer 'Actions', Frame 1, Line 3 1084: Syntax error: expecting rightparen before colon.
Obviously there is some problems with the code.

I thinl u need something like this
function Position(object:MovieClip, location:String):void
     switch(location)
          case "top":
               object.y = 0;
               break;
          case "bottom":
               object.x = 0;
               break;
Position(object,"top");
or
Position(object,"bottom");
http://www.darshanrane.com

T410 lots of case problems

Similar Messages

Maybe you are looking for