T43: Recovery Discs are corrupt and Rescue and Recovery won't restore from the Hard Drive?
I recently created Recovery Discs in Windows XP, but when I insert Disc 2, it always says that it is the incorrect disc so I cannot continue the factory restore.
Now I'm trying to restore by booting into the Rescue and Recovery on my hard drive, but it cannot find the hidden factory partition on the hd. It also now says that the restore had a "convertion" error when it wouldn't recognize disc 2 and will not let me try to look at my hard drive to restore anymore. If I use the RR boot disc, it will let me try to restore, but it finds nothing restorable on the HD.
I did look at the hard drive and see 2 partitions with one being a IBM_SERVICE partition with 3.9GB total size and 2.9GB free space.
Please help, thanks.
Hi,
maybe somebody here could help me. i've totly lost the original partition of IBM on my T41 thinkpad. If somebody could advise me how do i get it back, i would appreciate it very much.
Thanks,
Shai
Similar Messages
-
Hi, my mac air is really low on disk space, can I remove itunes (which is huge) to an external hard drive to free up space?...and then run it from the hard drive instead of the mac,even if the mac no longer has space to accomodate the size of the library?
Yes.
Copy your music iTunes Library folder to the external drive and change the Advanced settings in iTunes to point to this new location.
Once you're happy with these changes you can delete the same Library from your User account to free up space on the internal drive. -
Recieved error messages while performing recovery to factory state from the hard drive
HP Touchsmart tx2-1165ea, product no:NM515EA,microsoft vista SP1 operating system.
I keep recieving error messages during recovery to factory state from hard drive and perfoming a recovery from my recovery disc hangs on disc2. Therefore I am unable to update vista sp1 to vista sp2 the reson is: error SMI primitive installer failed (ox8007371c).
Reason for recovery ? performed a clean upgrade to windows 7(as rcommended) but I dont like that operating system
Request: kindly rectify my factory shipped recovery partion errors.Thank you for the clarification.
Typically, service packs have some requirements before they are listed in Windows update. It's really the build ID that determines what updates are listed through Windows Updates. Various Windows Updates will change the build ID and once that prerequisite is reached, service should be listed. I know that service pack 2 does not show in Windows Update until several updates and restarts later on my Vista SP1 system at home.
Have you tried running Windows Update multiple times making sure to install the important updates or did you go straight to trying to manually install the service pack?
1. recovery disc is on the hard drive shipped in the computer from the factory.
I may be reading too much into this, but does this mean the recovery was performed by pressing F11 during boot or by using disks created using the hard drive's recovery partition prior to upgrading to it to Windows 7?
Also, how many times did you attempt the recovery from scratch? Many users have stated simply doing the recovery again took care of the issue and this seemed to be independent of manufacturer.
You can try the registry edit listed here, but registry edits are a little risky and do so at your own risk. However, try the first solution in the registry edit post.
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓ -
DId a factory resent on my iPhone and it now won't restore itself from the apple logo even when I hold down the "on" button and the "home" button together
Next time, remember to first turn iMessage & FaceTime off, delete the iCloud account, then restore/reset the phone. To fix, if you setup a support profile with Apple, you can login to your support profile & remove the phone. If not, change your Apple ID password.
-
My hard drive crashed and i lost all my rippped cd songs from the hard drive. Luckily they are all in icloud but how do i get ripped music from icloud to redownload back to the PC all in one go???
Hi,
The simplest solution would to restore from your back up - https://discussions.apple.com/docs/DOC-4112
If you do not have a back, you can select first track on list in song view, from menu > edit > select all. Next ctrl+click and select download from pop up. You may wish to do this in small batches as it will take some time to download.
Jim -
I bought an album and one of the songs won't download. It says that the file may be corrupt and to 'check available downloads' from the store menu.
Hi Stimulator7
You may find some helpful information in the following link:
http://www.apple.com/support/itunes/store/lostmusic/
If not use the contact us link at the bottom of the page.
Hope this helps
J.C -
I want to upgrade to Mavericks. Will I need to reinstall all of my apps and copy my files back to the hard drive? I have not installed an OS on a Mac before and I'm wondering whether it is as involved as on a PC.
Short answer: You do NOT have to reinstall all your apps and copy your files back.
Longer answer: Upgrading the OS does not touch any user files. Upgrading the OS should not interfere with any applications which are compatible with Mavericks. In my experience non-Apple apps are generally left unchanged by the upgrade. It is possible that some apps may need to be upgraded. One good resource for checking application compatibility is RoaringApps.
Finally, it is always wise to backup everything, just in case. -
I accidently deleated a file from the Elements organizor and from the hard drive. Can I get it back? How to do it?
There's a good chance that you can if you haven't done too much work after deleting it. Typically files are not actually wiped from the hard drive, rather the space they take is marked as free to use by another file if needed. So if it hasn't been used by another file it can be recovered.
Try this program... it will help if you know where the images were stored.
http://www.piriform.com/recuva
Colin -
The Elements 12 Mac disk works fine - I also have a Dell, and the Windows disk will not run at all, sounds like it's grinding, and is almost impossible to remove from the hard drive. I cannot find any place to tell me who to CALL to ask for a replacement!
Hi Samcat,
You can use a download instead of the disk as an alternative: Adobe - Download free trial version Adobe Photoshop Elements 12 | Adobe you can license with your serial
Please test the disk in another windows machine to check if it's caused by the drive or the disk. If you tested with 2 drives please start a support case, i assume Adobe will only provide downloads at this point. They are the same as the trials. If you still need a disk you can burn the trial to a disk as a backup disk. Good luck! -
Hi All, I recently bought a Mac Book Pro and transferred all my photos from my hard drive onto the Mac. I realised that there were some folders which didn't have the camera information embedded in the files and these files refuse to open on iPhoto. I know that the folders that have the problem were not transferred to the hard drive via a photo transfer application (I have a Canon camera) but I simply copied them out of the photo card and onto my old PC.
Is there some way I can open these pictures on my Mac? They work fine on a PC.Thanks for your reply.
The files don't open in preview either. In preview I get the error message 'The file "xxxx_xxx.jpg" could not be opened. It may be damaged or use a file format that Preview doesn't recognize'. The folders with these un-openable pictures do not even get imported into iPhoto. When I try to import them I get an error message about the files being unreadable.
The color profile information on the un-openable files is not visible but I see that all the other files from my old drive are RGB. -
My new LaCie external hard drive is 'seen' by my iMac and I can go into the Finder and open files and folders. I am using the hard drive for Time Machine back up. However Time Machine says it can't find the drive.
The same thing happened recently between Final Cut Express and my other LaCie external hard drive used as the Scratch disk. It fixed itself.
I've run out of ideas. Help would be very much appreciated. Thanks.have you done some searches on FCPx and time machine? Is there a known issue with using a TM drive with FCPx? dunno but ...wait...I'll take 60 sec for you cause I'm just that kind of guy.... google...." fcpx time machine problem" Frist page link
http://www.premiumbeat.com/blog/fcpx-bug-best-practices-for-using-external-hard- drives-and-final-cut-pro-x/
You cannot have time machine backups on your hard drive if you intend to use it in FCPX.
booya! -
Had to reinstall Lion. Backed up my music to an external hard drive. When I plug in my iPod a prompt msg says it's synced w/another iTunes library and asks if I want to "erase and sync" (to what is now an empty library) or "Transfer purchases". Do i "erase and sync" and re-add music from the hard drive once that's done?
You just need to tell iTunes where the library is located. If you want it back on your internal drive, copy the entite iTunes folder. Follow the instructions below.
iTunes: How to move your music to a new computer (Mac or Windows):
http://support.apple.com/kb/HT4527 -
HI, I HAVE A MacBook Pro 2.3GHz dual-core Intel i5 AND I WAN'T TO UPGRADE THE HARD DRIVE UP TO 750GB AND ALSO THE RAM MEMORY TO 8GB. WHAT SPECIFIC MODEL OF HARD DRIVE AND RAM MEMORY SHOULD I BUY??? THANKS
No need to type in all caps - we HEAR you!
I would take a look at the internal drives offered by both Crucial (click the link "Internal Hard Drives Now Available") and OWC. I would stay away from Western Digital drives as they seem to have problems on a number of Mac models.
You can also shop for RAM at Crucial and OWC - just select the System Scanner tab at the Crucial website to find out which memory is right for your machine.
Good luck,
Clinton -
I have stored everything on my Macbook pro in a external hard drive (Time Machine) Now that we have "wiped the machine" I am told I can start it over and load ontent--apps, docs, etc from the hard drive, just plug it in, find the time machine and what? I need to know what to highligh, what to click on.
hirogliffix,
take a look at this Apple page — in particular, the “Restoring data from Time Machine backups” section and its “Restoring your entire system from a backup” subsection. -
My MacBook Pro was stolen less than a week ago, and I'm not sure if the hard drive was wiped, if it was wiped would I still be able to find it with the findiphone app? Or would it be untraceable after it was wiped? I had alot of special things on my laptop, and I would hate it if I didn't find it, so I'm hoping it wasn't wiped and I will be able to find it soon, HELP ME IF YOU CAN PLEASE! ANYTHING HELPS!
If that drive was erased, you should have received a confirmation email.
Maybe you are looking for
-
when i deploy the ejb2 app in weblogic 9.2 , i got the following errors, pls help me. Errors occured while initializing a new deployment plan. ORACLE is not a legal value for GeneratorType. The value must be one of the following: [Identity, Sequence,
-
JS CS3 How to apply wrap options to selected textframes
If you manually select a number of textframes and then click on the wrap around bounding box option for example it is applied to all the selected items. To do this in a script can it be done without looping through each selection? For example: var my
-
Firefox won't uninstall from my pc. It is 21.0 (x86 en-US)
TO remove this has me in an endless circle of re-booting my computer. IT still won't remove! What to do?
-
How is importance of PL/SQL today?
Hi, I want to begin a commercial training that teaches me how to program an Oracle database in PL/SQL. This training lasts 12 months, and before I start it, I want to know what is the importance of PL/SQL today? Is PL/SQL still a modern programming l
-
Unable to See any field in General Setting panel of List UIBB
Hi Guys, I am facing a problem of seeing nothing (not able to expand) in General setting panel of list UIBB after creating it with feeder class entry in component configuration editor. (as attached screen shot) Please help me whether this an authoriz