T7900 Speaker Question ?

Did anyone using T7900 speaker system yet ? do they have a hole in the back that could hang in the wall sitck with nail ?
Any store saling T7900 yet if i live in Us ... thanks

The T7900 is the set replacing the T7700. I have yet to understand what the difference between the 2 sets are though. As such, without actually seeing a T7900 in person, I think it is reasonably safe to say the T7900 sats do have a hole in the back for wall mounting like nearly every sat in the Inspire and Mega/Gigaworks series.
Concerning stores selling them... Google it. Or look up some of the countless price-checking sites that exist. Or buy them directly from the Creative store on *this* website.
Good Luck.

Similar Messages

  • Built In Speaker Question....

    This may be a dumb question... But the other day i started freaking out because i thought one of my built in speakers stopped working (the right one). But then i looked up the iPhone 3G specs on the apple website and noticed that the one i was talking about was marked as the mic.
    Is it just a mono speaker system built in? So the left one is the speaker and the right one is the mic (when you're looking at the bottom with the screen side up)? Because if it's not then I need to return it...

    Gaax wrote:
    This may be a dumb question... But the other day i started freaking out because i thought one of my built in speakers stopped working (the right one). But then i looked up the iPhone 3G specs on the apple website and noticed that the one i was talking about was marked as the mic.
    Is it just a mono speaker system built in? So the left one is the speaker and the right one is the mic (when you're looking at the bottom with the screen side up)? Because if it's not then I need to return it...
    The one on the left is a speaker and the one on the right is a mic.

  • Just posted my 10 CFUnited speaker questions

    As a speaker at this year's CFUinited I was asked to answer 10 questions about the conferences and myself. I've posted them on my blog.  - blog.cartweaver.com.
    For anyone who does CF or is thinking about learning ColdFusion, CFUnited is THE conference to attend. Hope to see many of you there!
    Lawrence   *Adobe Community Expert*
    www.Cartweaver.com
    Complete Shopping Cart Application for
    Dreamweaver, available in ASP, PHP and CF

    I deleted the runs that shouldn't be there, but they kept coming back when I reconnected the Nano to try to post the Basic run that hadn't posted. So I did the reverse of my "fix" for runs missing from the Nike+ site. I moved the 5K run (that kept re-posting) from my "latest" folder on the Nano and put it in the "Synched" folder. Then reconnected the Nano to Itunes. Nike+ then posted the Basic run (with time stamp that was hours off but who's fussy) and did not re-post the 5K. (Despite the fact that Nike+ keeps saying through all of this that I am not connected to the Nike+ server.)
    This is all great fun in a kind of obsessive-compulsive way But I think I am going to give up this hobby of futzing with my Nike+ web-site and go pull weeds, wash the car, or do something really useful.

  • 8350i ear speaker question

    Can anyone tell me for sure if an 8330 ear speaker will work in an 8350i?  I have low volume on my 8350i and ordered two replacement speakers that I was told would work in the 8350i as well as all other Curve models.  Neither new speaker has any sound.  If I reinstall the old speaker it works, albeit low volume.  The seller "swears" they are good speakers.  Giving him the benefit of the doubt, I have to question the compatibility.   (JFYI: I have been using this phone for several years and know how to operate it).
    Thanks,
    Mike

    open the advanced and look at the phone only profile, look for ptt and see whats there,,, adjust accordingly

  • Speaker Question

    hi can anyone tell me why my itunes only plays out of 2 speakers on my computer. Im using a creative audigy sound card and a dell 5.1 speaker setup. My movies play from all 5 speakers but Itunes only plays out of the 2 front.
    Thanks
    Eddie
    dell   Windows XP Pro  

    Thanks, Paul.  I appreciate the quick response.  I suspected what you said would be true; however, I was hoping......
    The 2.1 speaker system sounds pretty nice on here, but (of course) it doesn't compare to my desktop with the 5.1 system  WOW!!!  I wish this laptop had a 5.1 sound card, I would be very happy indeed. 
    Thanks again. 

  • Headphones and Speaker Question

    I have an Intel imac--specifications listed at the bottom. I have JBL speakers attached to the headphone jack as required. My plantronics USB headphones just went and now thinking about purchasing nice analog headphones. Since the JBL speakers are attached to the headphone jack and I do not want to frequently plug and unplug, is there a way that I can share the same headphone jack with both. the JBL speakers do not have a connection for that. Is there another device that would fulfill this need?

    this same thing happened to me...My headphone jack has worked well for the past 2 1/2 years. Now my right Boston speaker no longer emits sound. It's not the speaker itself or the sound system because it works fine with other computers/ipods.
    when i try to fiddle with the input cord that goes into my headphone jack it will sometimes work and play music out of both speakers. Do I have to mail the whole computer into apple or does anyone know if this is a quick fix that a local computer shop could do?
    any help would be great...thanks!

  • Speaker question HP dv7

    I have an HP dv7-3065dx. I was just wondering how many speakers this thing has. I know it's not that important, just wondering. If nobody knows, where could I find this out? Any help would be appreciated. 

    Hi,
    One thing can help is the following.  Right click the speaker icon in the Taskbar and select 'Playback Devices'.  Left click the default device once to highlight it ( it's usually 'speakers & headphones' ) then click the Properties button.  Click the Enhancements tab and put a tick in the box next to 'Loudness Equalization'.  Click Apply to save the change and then click OK in all remaining windows and see if this has helped at all.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • Blown Speaker Question

    Hi guys. Ok, so long story short, my left iPhone 5 speaker is blown. The right speaker works perfectly. Do any of you guys know how much it costs to get my speakers replaced? Thanks

    The phone only has one speaker.  The other is the microphone.
    A Picture is worth blah, blah, blah.  LOL

  • X-Fi speaker assignment problems with Elite Pro and T7900 speak

    Ok, so this appears to be a very common problem on these boards and I'm not so sure that a solution exists.
    I have wired everything up correctly, however, my front speakers are coming from behind me and my rear speakers are coming from in front of me. As well as that, I cannot get sound from my front speaker and if I mess around with the THX settings, i sometimes manage to get the side channels coming from my rear or front speakers. This is very annoying. Why is the speaker assignment not automatic? WHAT IS THE POINT OF THE INSANE ASSIGNMENT MANAGEMENT SYSTEM!!!!
    Does anyone have the slightest clue as to how I can get the right channels to come from the right speakers? I'm getting fed up with this. I wouldn't mind but my older Audigy card did all this by its-self!
    Thanks in advance!

    In no way a 300W Power Supply has enough power for all your stuff.
    2 HDD's, a power-hungry Pentium, a xfi card, dvd burner and many other stuff ...
    Problems like this can happen then if your power supply has not enough power to handle all this stuff.
    Get a better powersupply that can handle your stuff and I am sure it will work again. In a few cases its also possible that YOU damage your hardware on this way, if it can not get enough stable power, it might mess up your hardware. I also already blowed up a harddisk one day because I have connected too much stuff to one cable. I had 3 HDD's, Mainboard, Lights, Fans and DVD connected to one single cable. All devices there did not get enough power, harddisks made crazy sounds (on/off/on/off very fast) and after that one of my HDDs was bad.
    But no ... you can't blame anyone for this. In 99% a bad power supply should not damagae your hardware, it will just make sure it does not work anymore. Since you installed that hardware, YOU are responsible for this. If a hardware-dealer would have to install this card for you, it would be his fault, but now its yours.
    BTW: Why do you expect that a 300W suppy is enough!? I mean really ... think about it! See what todays PS can do, take a look how much your pentium already needs ... There are at least 00W gone for your CPU, another 00 for your Videocard and just 00 left for ALLLL the other devices like your harddisks (20-30W each one), DVD, mainboard, soundcard ... In no way this will be enough. You must have missed the last 5 years ...
    BTW: I don't think that the software audio console would not work when not having connected the y-power cable. I forget that cable too one time. My console did still work, just in games I got some strange problems a lot of times (no more sound for -2 minutes, crackling and other poroblems) which got solved after I plugged in the power-cable to soundcard.Message Edited by Homey-GER on 0-7-200705:42 AM

  • Speaker question? I'm stuck?

    I just opened a box of Logitech 5.1 Speakers X-540. No a sign of instructions but Im holding yelo, black and lt. green male sub-min plugs... Since my Mini only has 1 audio out plug am I screwed?
    I also have some kind of jumper; the lt. green plug splits to 2 a yelo and red plug (all female).
    WTH?
    Thanks Steve

    Did you search their support site for the manual?
    You may find that there is a setting that enables you to use one of the cables for now, but you may need an external sound module that supports surround sound.
    Luck-
    -DP

  • Headphone speaker question

    Hi all, (sorry if i am in wrong Forum Thread)
    I have a pair of Zalman ZM-RS6F 5.1 Surround Sound headphones, but i also am considering buying a set of speakers to use during the day.
    My dilemma is that in order to swap between Speakers and Headphones, is it a case of switching the PC off to change the jacks or is there a product on the market that i can plug both Speakers and Headphones into and simply switch between them at the touch of a button?

    There is no way to specify on the card that voice goes through headphones but all other audio over the speakers. Unless the recording/voice application supports this, then the only other option I can think of is to use a second audio device (like onboard audio or a second card), though this may have it's own problems as it can be difficult to get different audio devices to work together sometimes.
    Cat

  • Audigy 2 ZS + Creative T7900 7.1 Centre Speaker Prob

    I've just installed an Audigy 2 ZS sound card and Inspire T7900 speaker system. When setting up the speakers I noticed that the centre speaker was not working, looking into the problem futher the speaker is working but the volume level for it is SO VERY LOW. I've tried lowering the volume levels of the rest of the speakers to try and balance it out, but that doesn't help much.
    Can anyone help?
    P.S. I'm using Windows XP SP2 & the latest drivers for the sound card.

    JJPatty wrote:
    Thanks for the replys, tried all but still the same.
    I then decided to remove the sound card and reinstall it to a differnet PCI slot. Whilst removing the card I noticed that the cable connecting to Line Out 3 (Yellow'ish) couldn't fit flush up against the sound card, 5mins later, and small modifaction to the case and hey presto full 7. sound.
    P.S. I'm an idiot 8-))
    I like your honesty there. and enjoy ur audio now. Cheers

  • Creative T7900 Why don't 7.1 work with mplayer 10?

    Hi.
    I have Creative T7900 speaker system and soundblaster audigy 2 ZS platinium pro and my problem is that i can't get the 7.1 surround working with mediaplayer 10,winamp,creative media source when i try to play mp3s or music CDs it just gives me sound from the 2 front speakers (left and right) even though i tried to set the program to use 7.1. But when i play DVDs in powerDVD for exampel the 7.1 sound works fine. Could it be the mp3s? or does mplayer 0 and such have support for 7.1
    /Kara.

    Kara,
    Try turning on CMSS.
    Jason

  • Need to reduce to four speakers with T7900

    I have the T7900 speaker system and due to lack of desk space I would like to reduce to just:
    Centre
    Sub-Woofer
    Left
    Right
    Can I do this without losing sound quality? If so, what settings should I use in the Volume Panel?
    I would be very grateful for any help, advice, etc.
    Many thanks.

    You will only get sound out of all your speakers when you:
    Play a movie/game that is encoded with dolby digital surround sound.<
    Enable the CMSS feature on your Creative sound card. <

  • T7900 problems

    Hi guys, im new here and i just bought a Creative Inspire 7.1 T7900 Speaker System thing is that when i plugged everything correctly and checked multiple times there was no sound coming out at all. I Have a Sound Blaster Audigy SE, i tried volume settings, downloading new SB drivers, trying different settings from Control Panel but nothing..... no sound.. any help please?
    Thanks in advance

Maybe you are looking for

  • Bought a rip-off App that stalks your activity, want my money back but they blocked me!

    Alright guys! My problem is that I bought this app called iTeleport VNC. Basically what it does is show your Mac screen on your iPhone. I thought this should be fun and so I decided to buy it for € 3,99 (it seems to be for sale for € 17,99 now, proba

  • Cannot find deployed BPM application in bpm workspace with BPM 11.1.1.7.0

    I created a bpm suite 11.1.1.7.0 servers with one admin server and one soa managed server. I deployed a BPMN application to it according to the "Building Your First Process with Oracle BPM 11g" tutorial (a little bit changes according to thread https

  • Excel Mime Type

    I am creating a web-based application and the PHP server needs a bit of information that is provided by the browser, the mime type of a file upload, particularly an Excel file. In Safari 3, on my Mac, the mime type for .xls files is application/vnd.m

  • How to install a graphic signature in Mail

    I've upgraded to Yosemite and want to use Mail 8. My email accounts are migrated, including one which is an app account. However, when I try to attach a signature that I've saved as a JPEG (Mail-Preferences-Signatures), it doesn't work. it works fine

  • Help!!!  isync won't open!

    The isync application, in the applications folder used to be a grey circle with rounded arrows inside. Now it looks like the default applications icon...what happened? I have a dot mac account and have that sync button on the menu bar, and it works f