TA48312 I'm using iTunes 11 final version on my pc windows 7 and I cannot connect to the internet with any of its feautures. why? I'll be grateful if you help,thanks in advance.
Hi everybody,
First of all I was not one of iTues users till by chance discovered its amazing features of downloading all kinds of items that help in education in particular. I set up iTunes version 8 I gusse and it was working properly either by using direct connect to the material or downloading it. Then, I made I mistake when I tried version 11 and everything stopped working. No downloading or even connecting the web. I'm a student and I'm in a bad need to this wonderful programme. I must not forget that I tried many steps to solve this problem by uninstalling iTunes with its contents from its roots till registry files, and I set up the old version once and then the newer version 11 and finally version 9 and all my trials were in vain. Please I need your help and advise. I'm looking forward for your reply and thanks in advance for your care.
adam karim,
Many thanks.
With those symptoms, I'd try the following document:
Apple software on Windows: May see performance issues and blank iTunes Store
(If there's a SpeedBit LSP showing up in Autoruns, it's usually best to just uninstall your SpeedBit Video Accelerator.)
Similar Messages
-
iam using iphone 4S with win 7 PC and i cannot connect to the internet through my phone but i tried with my other 4S and it works but what should i do for the first iphone 4S???
as i said i have two iphone 4S,,,,,
1st one --- has os 5.1
2nd one has os 6.0
i tried 2nd one with carrier reliance gsm nd it works with that personal hotspot setting using USB...
but i want to connect the first 4S with carrier TATA DOCOMO GSM but its not working with the same USB feature????
plz reply asap...!!!
thnxxx in advance!!!If not this:
iOS: Wi-Fi or Bluetooth settings grayed out or dim
One user reported that placing the iPod in the freezer fixed the problem.
Also heating sometimes works. See:
Why can't I select my wifi settings?
A trick that works frequently with iPhones:
Settings > AirPlane Mode ON, Do Not Disturb ON
Power down and wait 5-10 minutes
Power up
Settings > AirPlane Mode OFF, Do Not Disturb OFF
If not successful, an appointment at the Genius Bar of an Apple store is usually in order.
Apple Retail Store - Genius Bar
Then:
Does the iOS device connect to other networks? See other networks? If yes that tends to indicate a problem with your network.
Does the iOS device see the network?
Any error messages?
Do other devices now connect?
Did the iOS device connect before?
Try the following to rule out a software problem:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on your router
.- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem and it does not connect to any networks make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar -
I have used the older version of firefox and it worked fine. I downloaded version 4 and now cannot get on the internet with firefox. It keeps saying I'm offline and to check a particular box to correct the problem. I have no idea what they're talking about and would appreciate any help.
Ah I figured it out.....Mcafey was blocking it. Why on earth did AVG being uninstalled update mcafey settings, to block firefox?
-
Cannot connect to the Internet with browser when using VPN
I am experiencing an odd network problem and am hoping that someone on this list has seen something similar and can help me isolate the cause.
I have a Mac Pro running Mac OS X (10.5.8) and use Cisco's VPNClient to connect to my employer's network. Some time in the last year I started getting this odd behavior wherein that while connected via VPN, I cannot open external web pages in Safari (Version 5.0 (5533.16)). When this happens I get the following message:
+Safari can't open the page "http://www.google.com/" because your computer isn't connected to the Internet.+
Web pages on the company's internal network work fine. Firefox exhibits the same problem. However, the very odd thing (to me), is that I can get to the Internet using the browser in NetNewsWire. Other services (like twitter) also seem to work fine.
The problem is intermittent and occurs between restarts. After some restarts the problem is not there. Also, connecting and re-connecting via VPNClient does not affect the behavior. If access to the Internet is working then it will continue working, at least until the next restart. If I restart for whatever reason (software update, etc.) the next time it may or may not work.
This has been going on over several updates to Mac OS X and Safari.
Another clue is that my MacBook, also running 10.5.8 works fine when connected from the same home network so I am pretty sure the problem is with my Mac Pro.
Anyone out there have any idea what could be causing this and how to go about fixing the problem?
Thanks in advance,
KPEarthlink can be challenging. Have a look at this
very helpful post from Eme.
This may lead you in the right direction.
World leaks relates to memory issues with Safari that
are on-going and being addressed in the developer's
community. More information can be found
here.. To
stop the warning message, go to your Debug menu and
deselect "always check for world leaks".
iMac G5 Rev C 20" 2.5gb RAM 250 gb
HD/iBook G4 1.33 ghz 1.5gb RAM 40 gb HD Mac
OS X (10.4.8) LaCie 160gb d2 HD Canon i960
printer
I couldn't fix it, and the Earthlink technician couldn't fix it...until she checked and found that the starting address: "www.my.earthlink.net" is down. In fact, it's still down, so I'll just continue using Foxfire for awhile. I can connect by typing "www.earthlink.net" in the addres bar, but it's so much easier to just click on Foxfire in my dock. This shows the value of having a spare browser.
I'm going to mark it "solved. Thanks for your help, It was a bit technical for me, but I tried. I had to, having just sent an article about the value of persistence to a friend, how could I fail to persevere? -
If anyone has experienced this issue and has a way to solve this problem I would greatle appreciate the help.
Error 13 and 14: These errors are typically resolved by performing one or more of the steps listed below:
Perform USB isolation troubleshooting, including trying a different USB port directly on the computer. See the advanced steps below for USB troubleshooting.
Put a USB 2.0 hub between the device and the computer.
Try a different USB 30-pin dock-connector cable.
Eliminate third-party security software conflicts.
There may be third-party software installed that modifies your default packet size in Windows by inserting one or more TcpWindowSize entries into your registry. Your default packet size being set incorrectly can cause this error. Contact the manufacturer of the software that installed the packet-size modification for assistance. Or, follow this article by Microsoft: How to reset Internet Protocol (TCP/IP) to reset the packet size back to the default for Windows.
Connect your computer directly to your Internet source, bypassing any routers, hubs, or switches. You may need to restart your computer and modem to get online.
Try to restore from another known-good computer and network -
i have 64 bit windows 7- and itunes version 10.6.1.7. yet i cannot connect to the itunes store. do i need to download something additional?
Close your iTunes,
Go to command Prompt -
(Win 7/Vista) - START/ALL PROGRAMS/ACCESSORIES, right mouse click "Command Prompt", choose "Run as Administrator".
(Win XP SP2 & above) - START/ALL PROGRAMS/ACCESSORIES/Command Prompt
In the "Command Prompt" screen, type in
netsh winsock reset
Hit "ENTER" key
Restart your computer.
If you do get a prompt after restart windows to remap LSP, just click NO.
Now launch your iTunes, Sync and see if it is working now.
If you are still having these type of problems after trying the winsock reset, refer to this article to identify which software in your system is inserting LSP:
iTunes 10.5 for Windows: May see performance issues and blank iTunes Store
http://support.apple.com/kb/TS4123?viewlocale=en_US -
I have just dowloaded iTunes new version 10.4 (on Windows), and I can't paste any artwork from Word anymore, only directly from the net (where the size or the quality of the images is not always optimal). Major problem given that I'm in the process of re-ripping some 40K+ songs in Lossless format... Any way around this?
Peter Hah
After spending another two days on pinning down the iTunes 10.5 blank store page problem, here's the solution to be found: https://discussions.apple.com/thread/3372617?start=0&tstart=0
Look out for "japiohelp".
In short:
a) press Windows key + "R", enter "cmd", and press Ctrl+Shift+Enter (= runs as admin)
b) enter "netsh winsock reset" and pres enter
c) reboot the computer
and Bob's your uncle.
P. -
Can I use iTunes Match without a computer? I only have an iphone at the moment with stored music. My computer was stolen.
iTunes match will only work from a computer in terms of uploading new content. You should be able to copy iTunes purchases back via File > Transfer Purchases (File > Devices > Transfer Purchases on iTunes 11). For content from other sources there are some third-party programs listed half-way down this page which might help you get your content back from your phone : https://discussions.apple.com/docs/DOC-3991
-
I switched ISP a few days ago and had problems with airplay since. After restarting and reinstalling and updating, re entering pass keys for new wi fi on everything, Apple TV shows: Your Apple TV is connected to your wi fi network but cannot connect to the Internet. Ipad3 and iPod touch 3G have no airplay icon or get one briefly then it disappears again. Same with itunes on windows laptop.
Can anyone help?
BobWelcome to the Apple Community.
Intermittent problems are often a result of interference. Interference can be caused by other networks in the neighbourhood or from household electrical items.
You can download and install iStumbler (NetStumbler for windows users) to help you see which channels are used by neighbouring networks so that you can avoid them, but iStumbler will not see household items.
Refer to your router manual for instructions on changing your wifi channel or adjusting your multicast rate.
There are other types of problems that can affect networks, but this is by far the most common, hence worth mentioning first. Networks that have inherent issues can be seen to work differently with different versions of the same software. You might also try moving the Apple TV away from other electrical equipment. -
HT3204 my itunes cannot connect to the internet
my itunes cannot connect to the internet
I don't use windows, don't you have a help folder...go there, enter firewall, look for how to disable...you can try to update with just your ant-virus disabled, but if your firewall is still active it most likely won't work.
-
how do you purchase a ringtone? i have enabled 'ringtones' in the 'general' section of itunes preferences and i am connected to the internet but i just cant see where in the itunes store to click once i am at the song i want to turn into a ringtone. help!
You don't
You have to create a ringtones. Google will find several ways to do this.
I use Garageband.
How to create custom ringtones in GarageBand 4.1.1
You can also use itunes:
Make free iPhone ringtones in iTunes 10 -
My Macbook Pro cannot connect to the internet using an ethernet cord.
My Macbook Pro cannot connect to the internet using an ethernet cord. It was working fine for weeks, then all of a sudden just stopped. What could the problem be?
Hi bean07670,
If you are having an issue with the Ethernet connection on your MacBook Pro, you may find the following article helpful:
Mac OS X: Troubleshooting a cable modem, DSL, or LAN Internet connection
http://support.apple.com/kb/TS1317
Regards,
- Brenden -
My imac and ipad2 will not connect to the internet with Windstream using an 2wire DSL modem.
Help my brand new imac and ipad2 will not connect to the internet with Windstream using an "2WIRE" DSL modem. Windstream tech service is useless. i can connect with the built in router through Ethernet or wireless, but still no connecting to internet, help! windstream said everything is working on their end, yea right. What i do know is that both the mac and ipad work at other places and can connect with wireless connected to the internet, so i know it's not the apple products.
these are brand new machines with lion.
This is my first mac, so I’m still new to how it works, which is not helping either so a detailed help would be great. Please help before my wife losses it
thanksThere is a 2701HG-B, and a 2701HG-D. If not labelled on the modem, ask Windstream which one they presently supply or how to tell the difference.
By the way tell your wife it isn't that bad. At least you have an ethernet DSL modem. There were times where DSL modems had RJ-11, USB, and Ethernet, and all three were used to provide access. At least now only the craziest DSL providers still use those modems. -
How to restart base station from airport utility? I used to be able to do it remotely
I currently use a Mac Pro 10.8.4 and have a time machine for wireless 6.3 (630.34). Sometimes I cannot connect to the internet and use network preferences to diagnose the issue. This results in being told to restart the wireless. The airport utility includes the drop down option of restarting but is not clickable so I can't choose it.
With my prior macbook and same time capsule, etc if i had problems connecting to the internet I would run network diagnostics to help out. This included clicking on the airport utility ---> base station --> restart. This worked most of the time.
Bottom line, is there something I am missing in not being able to restart the wi-fi remotely? ]
Thanks in advanceYou are likely forgetting a step.
Open AirPort Utility
Click on the Time Capsule icon
Click Edit in the small window that appears
Now click the Base Station menu.....top of the screen....not the Base Station "tab" in the center of the screen
Click Restart -
I cannot connect to the internet using my Mozilla firefox, but can connect with Internet explorer. How do I fix the problem. I tried some options on your website but nothing is correcting the problem.
== yesterday ==
== User Agent ==
Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.1; Trident/4.0; .NET CLR 1.1.4322; InfoPath.1; IEMB3; .NET CLR 2.0.50727; .NET CLR 3.0.04506.30; .NET CLR 3.0.04506.648; .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729; IEMB3)Try clearing your cache and cookies.
# Open the Tools menu, then select Clear Recent History... .
# In the '''Time Range to clear:''' drop-down, select '''Everything'''.
# Click the arrow next to '''Details''' to display the list of items that can be cleared.
# Select both '''Cookies''' and '''Cache'''.
# Click Clear Now .
Or you can try creating a test profile to see if it happens on that profile as well. See [[Managing Profiles]]
Maybe you are looking for
-
Podcasts are all put in one folder How do I separate?
I am downloading many podcasts off of Oprah's Spirit Channel. When I click on Get Episode, it starts downloading under Itunes Store. When it is finished downloading, it moves up to the purple Podcats icon. So far, I have downloaded 3. They are all in
-
Can I use BOTH IE & FF and retain the shortcuts to both to use at will?
Can I use BOTH IE & FF and retain the shortcuts to both to use at will? I can download FF ok and use for a day or so along with IE, but after that I start to get messages from Windows saying IE is not my default browser and do I want to make it the d
-
Can you please walk me through?
Hi. Can you please walk me through the set-up recording my 3 part composition? I am going to use a different instrument for each part (track). First I record and pan track 1 (first part) to the left, 2nd track (2nd part left in the middle), third tra
-
ISE Sponsor Portal I'm still coming to grips with ISE! Web Portal Managment>Settings>Sponsor>Language template>English>Configure Print Notification Rather than just add text I will like to add some graphics, I tried adding HTML to the Layout which do
-
Problem with BADI CRM_ISALES_SET_EXTENSIONS
We are using CRM 5.0 version with ISA (Internet Sales Application), in ISA front end we have a DTO (design to order) scenario where the user has to enter some description text as to explain the necessity of the design to order that particular product